In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited".

The remote Ubuntu 22.04 LTS host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-6743-3 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When     the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in     diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when     diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. (CVE-2023-52600)

  - In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in     dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN:
    array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot     [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware     name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK>
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue     lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900     fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80     fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013     do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat     fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64     arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80     entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00     00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0     ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246     ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX:
    0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000     R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13:
    0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of     fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was     able to produce value less than -1 which cause the error. This patch simply add the change for the values     less than 0. The patch is tested via syzbot. (CVE-2023-52603)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end     interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just     added in this transactions, skip end interval elements that are not yet active. (CVE-2024-26581)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on     PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation.
    However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not     checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx()     R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3:
    (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,     smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5     first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise:
    frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 =     1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400))     R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0)     ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and     finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...]     Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run     include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline]     bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350     net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359     bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
    __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
    __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline]     do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by     rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with R7     pointer arithmetic on flow_keys prohibited. (CVE-2024-26589)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in     bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp     program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with     target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL     (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was     loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which     one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ?     page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ?     asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10     bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30     do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
    (CVE-2024-26591)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Ubuntu 22.04 LTS host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-6743-2 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When     the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in     diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when     diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. (CVE-2023-52600)

  - In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in     dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN:
    array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot     [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware     name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK>
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue     lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900     fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80     fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013     do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat     fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64     arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80     entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00     00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0     ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246     ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX:
    0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000     R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13:
    0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of     fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was     able to produce value less than -1 which cause the error. This patch simply add the change for the values     less than 0. The patch is tested via syzbot. (CVE-2023-52603)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end     interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just     added in this transactions, skip end interval elements that are not yet active. (CVE-2024-26581)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on     PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation.
    However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not     checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx()     R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3:
    (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,     smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5     first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise:
    frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 =     1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400))     R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0)     ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and     finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...]     Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run     include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline]     bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350     net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359     bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
    __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
    __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline]     do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by     rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with R7     pointer arithmetic on flow_keys prohibited. (CVE-2024-26589)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in     bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp     program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with     target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL     (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was     loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which     one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ?     page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ?     asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10     bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30     do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
    (CVE-2024-26591)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Ubuntu 18.04 LTS / 20.04 LTS host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-6741-1 advisory.

  - Bluetooth BR/EDR devices with Secure Simple Pairing and Secure Connections pairing in Bluetooth Core     Specification 4.2 through 5.4 allow certain man-in-the-middle attacks that force a short key length, and     might lead to discovery of the encryption key and live injection, aka BLUFFS. (CVE-2023-24023)

  - In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When     the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in     diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when     diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. (CVE-2023-52600)

  - In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in     dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN:
    array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot     [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware     name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK>
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue     lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900     fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80     fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013     do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat     fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64     arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80     entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00     00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0     ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246     ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX:
    0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000     R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13:
    0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of     fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was     able to produce value less than -1 which cause the error. This patch simply add the change for the values     less than 0. The patch is tested via syzbot. (CVE-2023-52603)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end     interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just     added in this transactions, skip end interval elements that are not yet active. (CVE-2024-26581)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on     PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation.
    However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not     checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx()     R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3:
    (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,     smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5     first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise:
    frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 =     1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400))     R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0)     ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and     finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...]     Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run     include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline]     bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350     net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359     bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
    __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
    __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline]     do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by     rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with R7     pointer arithmetic on flow_keys prohibited. (CVE-2024-26589)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Ubuntu 22.04 LTS / 23.10 host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-6743-1 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: jfs: fix uaf in jfs_evict_inode When     the execution of diMount(ipimap) fails, the object ipimap that has been released may be accessed in     diFreeSpecial(). Asynchronous ipimap release occurs when rcu_core() calls jfs_free_node(). Therefore, when     diMount(ipimap) fails, sbi->ipimap should not be initialized as ipimap. (CVE-2023-52600)

  - In the Linux kernel, the following vulnerability has been resolved: UBSAN: array-index-out-of-bounds in     dtSplitRoot Syzkaller reported the following issue: oop0: detected capacity change from 0 to 32768 UBSAN:
    array-index-out-of-bounds in fs/jfs/jfs_dtree.c:1971:9 index -2 is out of range for type 'struct dtslot     [128]' CPU: 0 PID: 3613 Comm: syz-executor270 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware     name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Call Trace: <TASK>
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue     lib/ubsan.c:151 [inline] __ubsan_handle_out_of_bounds+0xdb/0x130 lib/ubsan.c:283 dtSplitRoot+0x8d8/0x1900     fs/jfs/jfs_dtree.c:1971 dtSplitUp fs/jfs/jfs_dtree.c:985 [inline] dtInsert+0x1189/0x6b80     fs/jfs/jfs_dtree.c:863 jfs_mkdir+0x757/0xb00 fs/jfs/namei.c:270 vfs_mkdir+0x3b3/0x590 fs/namei.c:4013     do_mkdirat+0x279/0x550 fs/namei.c:4038 __do_sys_mkdirat fs/namei.c:4053 [inline] __se_sys_mkdirat     fs/namei.c:4051 [inline] __x64_sys_mkdirat+0x85/0x90 fs/namei.c:4051 do_syscall_x64     arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80     entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fcdc0113fd9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00     00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0     ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffeb8bc67d8 EFLAGS: 00000246     ORIG_RAX: 0000000000000102 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcdc0113fd9 RDX:
    0000000000000000 RSI: 0000000020000340 RDI: 0000000000000003 RBP: 00007fcdc00d37a0 R08: 0000000000000000     R09: 00007fcdc00d37a0 R10: 00005555559a72c0 R11: 0000000000000246 R12: 00000000f8008000 R13:
    0000000000000000 R14: 00083878000000f8 R15: 0000000000000000 </TASK> The issue is caused when the value of     fsi becomes less than -1. The check to break the loop when fsi value becomes -1 is present but syzbot was     able to produce value less than -1 which cause the error. This patch simply add the change for the values     less than 0. The patch is tested via syzbot. (CVE-2023-52603)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: skip end     interval element from gc rbtree lazy gc on insert might collect an end interval element that has been just     added in this transactions, skip end interval elements that are not yet active. (CVE-2024-26581)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on     PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation.
    However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not     checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx()     R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3:
    (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,     smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5     first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise:
    frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 =     1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400))     R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0)     ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and     finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...]     Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run     include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline]     bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350     net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359     bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
    __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
    __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline]     do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by     rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with R7     pointer arithmetic on flow_keys prohibited. (CVE-2024-26589)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in     bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp     program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with     target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL     (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was     loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which     one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ?     page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ?     asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10     bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30     do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
    (CVE-2024-26591)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2024-519 advisory.

  - Transmit requests in Xen's virtual network protocol can consist of multiple parts. While not really     useful, except for the initial part any of them may be of zero length, i.e. carry no data at all. Besides     a certain initial portion of the to be transferred data, these parts are directly translated into what     Linux calls SKB fragments. Such converted request parts can, when for a particular SKB they are all of     length zero, lead to a de-reference of NULL in core networking code. (CVE-2023-46838)

  - In the Linux kernel, the following vulnerability has been resolved: uio: Fix use-after-free in uio_open     core-1 core-2 ------------------------------------------------------- uio_unregister_device uio_open idev     = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release     get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev)
    ------------------------------------------------------- In the core-1 uio_unregister_device(), the     device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister,     put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2     will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double     freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock.
    (CVE-2023-52439)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Defer the free of inner map when     necessary When updating or deleting an inner map in map array or map htab, the map may still be accessed     by non-sleepable program or sleepable program. However bpf_map_fd_put_ptr() decreases the ref-counter of     the inner map directly through bpf_map_put(), if the ref-counter is the last one (which is true for most     cases), the inner map will be freed by ops->map_free() in a kworker. But for now, most .map_free()     callbacks don't use synchronize_rcu() or its variants to wait for the elapse of a RCU grace period, so     after the invocation of ops->map_free completes, the bpf program which is accessing the inner map may     incur use-after-free problem. Fix the free of inner map by invoking bpf_map_free_deferred() after both one     RCU grace period and one tasks trace RCU grace period if the inner map has been removed from the outer map     before. The deferment is accomplished by using call_rcu() or call_rcu_tasks_trace() when releasing the     last ref-counter of bpf map. The newly-added rcu_head field in bpf_map shares the same storage space with     work field to reduce the size of bpf_map. (CVE-2023-52447)

  - In the Linux kernel, the following vulnerability has been resolved: block: add check that partition length     needs to be aligned with block size Before calling add partition or resize partition, there is no check on     whether the length is aligned with the logical block size. If the logical block size of the disk is larger     than 512 bytes, then the partition size maybe not the multiple of the logical block size, and when the     last sector is read, bio_truncate() will adjust the bio size, resulting in an IO error if the size of the     read command is smaller than the logical block size.If integrity data is supported, this will also result     in a null pointer dereference when calling bio_integrity_free. (CVE-2023-52458)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: fix check for attempt to corrupt     spilled pointer When register is spilled onto a stack as a 1/2/4-byte register, we set     slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it, depending on actual spill size). So to     check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid     the need to remember and double-check this in the future, just use is_spilled_reg() helper.
    (CVE-2023-52462)

  - In the Linux kernel, the following vulnerability has been resolved: efivarfs: force RO when remounting if     SetVariable is not supported If SetVariable at runtime is not supported by the firmware we never assign a     callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we     never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a     crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [     303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [     303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current     EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04:
    level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [     303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error:
    Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core     crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm:
    efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown     Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv     daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr :
    efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29:
    ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25:
    ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21:
    ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [     303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14:
    ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10:
    0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 :
    0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [     303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [     303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585]     efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [     303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156]     el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [     303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code:
    ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this     by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and     deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. (CVE-2023-52463)

  - In the Linux kernel, the following vulnerability has been resolved: mfd: syscon: Fix null pointer     dereference in of_syscon_register() kasprintf() returns a pointer to dynamically allocated memory which     can be NULL upon failure. (CVE-2023-52467)

  - A Null pointer dereference problem was found in ida_free in lib/idr.c in the Linux Kernel. This issue may     allow an attacker using this library to cause a denial of service problem due to a missing check at a     function return. (CVE-2023-6915)

  - A use-after-free vulnerability in the Linux kernel's netfilter: nf_tables component can be exploited to     achieve local privilege escalation. The nft_setelem_catchall_deactivate() function checks whether the     catch-all set element is active in the current generation instead of the next generation before freeing     it, but only flags it inactive in the next generation, making it possible to free the element multiple     times, leading to a double free vulnerability. We recommend upgrading past commit     b1db244ffd041a49ecc9618e8feb6b5c1afcdaa7. (CVE-2024-1085)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on     PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation.
    However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not     checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx()     R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3:
    (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,     smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5     first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise:
    frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 =     1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400))     R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0)     ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and     finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...]     Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run     include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline]     bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350     net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359     bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
    __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
    __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline]     do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by     rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with R7     pointer arithmetic on flow_keys prohibited. (CVE-2024-26589)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in     bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp     program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with     target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL     (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was     loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which     one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ?     page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ?     asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10     bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30     do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation.
    (CVE-2024-26591)

  - In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Avoid potential     UAF in LPI translation cache There is a potential UAF scenario in the case of an LPI translation cache hit     racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the     problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the     lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned     vgic_irq and add the corresponding decrement after queueing the interrupt. (CVE-2024-26598)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
195662	RHEL 6 : kernel (Unpatched Vulnerability)	Nessus	Red Hat Local Security Checks	critical
195267	EulerOS 2.0 SP10 : kernel (EulerOS-SA-2024-1592)	Nessus	Huawei Local Security Checks	high
193851	Ubuntu 22.04 LTS : Linux kernel (Azure) vulnerabilities (USN-6743-3)	Nessus	Ubuntu Local Security Checks	high
193714	Ubuntu 22.04 LTS : Linux kernel (Low Latency) vulnerabilities (USN-6743-2)	Nessus	Ubuntu Local Security Checks	high
193596	Ubuntu 18.04 LTS / 20.04 LTS : Linux kernel vulnerabilities (USN-6741-1)	Nessus	Ubuntu Local Security Checks	high
193592	Ubuntu 22.04 LTS / 23.10 : Linux kernel vulnerabilities (USN-6743-1)	Nessus	Ubuntu Local Security Checks	high
193375	Ubuntu 20.04 LTS / 22.04 LTS : Linux kernel (AWS) vulnerabilities (USN-6725-2)	Nessus	Ubuntu Local Security Checks	critical
193084	Ubuntu 20.04 LTS / 22.04 LTS : Linux kernel vulnerabilities (USN-6725-1)	Nessus	Ubuntu Local Security Checks	critical
192490	SUSE SLES15 Security Update : kernel (SUSE-SU-2024:0977-1)	Nessus	SuSE Local Security Checks	high
192487	SUSE SLES15 Security Update : kernel (SUSE-SU-2024:0926-1)	Nessus	SuSE Local Security Checks	high
192180	SUSE SLES15 / openSUSE 15 Security Update : kernel (SUSE-SU-2024:0910-1)	Nessus	SuSE Local Security Checks	high
192178	SUSE SLES15 Security Update : kernel (SUSE-SU-2024:0900-2)	Nessus	SuSE Local Security Checks	high
192141	SUSE SLES15 Security Update : kernel (SUSE-SU-2024:0900-1)	Nessus	SuSE Local Security Checks	high
192014	SUSE SLES15 Security Update : kernel (SUSE-SU-2024:0857-1)	Nessus	SuSE Local Security Checks	high
192011	SUSE SLED15 / SLES15 / openSUSE 15 Security Update : kernel (SUSE-SU-2024:0858-1)	Nessus	SuSE Local Security Checks	high
192006	SUSE SLES15 / openSUSE 15 Security Update : kernel (SUSE-SU-2024:0855-1)	Nessus	SuSE Local Security Checks	high
191796	Ubuntu 22.04 LTS : Linux kernel (OEM) vulnerabilities (USN-6688-1)	Nessus	Ubuntu Local Security Checks	high
190728	Amazon Linux 2023 : bpftool, kernel, kernel-devel (ALAS2023-2024-519)	Nessus	Amazon Linux Local Security Checks	high

Detections

Analytics

CVE-2024-26589

high

Tenable Plugins

critical

high

high

high

high

high

critical

critical

high

high

high

high

high

high

high

high

high

high