ImageMagick 7.0.8-11 Q16 has a heap-based buffer over-read in the coders/psd.c ParseImageResourceBlocks function.

The remote Ubuntu 14.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-6980-1 advisory.

    It was discovered that ImageMagick incorrectly handled certain malformed image files. If a user or     automated system using ImageMagick were tricked into opening a specially crafted image, an attacker could     exploit this to cause a denial of service or possibly execute code with the privileges of the user     invoking the program.

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

There are packages installed that are affected by multiple vulnerabilities referenced in the following CVEs:

  - In ImageMagick before 7.0.8-8, a NULL pointer dereference exists in the GetMagickProperty function in
    MagickCore/property.c. (CVE-2018-16329)

  - In ImageMagick 7.0.7-17 Q16, there are memory leaks in ReadPATTERNImage in coders/pattern.c.
    (CVE-2018-5246)

  - In ImageMagick 7.0.7-17 Q16, there are memory leaks in ReadRLAImage in coders/rla.c. (CVE-2018-5247)

  - ImageMagick 7.0.7-22 Q16 has memory leaks in the ReadDCMImage function in coders/dcm.c. (CVE-2018-5357)

  - ImageMagick 7.0.7-22 Q16 has memory leaks in the EncodeImageAttributes function in coders/json.c, as
    demonstrated by the ReadPSDLayersInternal function in coders/psd.c. (CVE-2018-5358)

The remote Ubuntu 16.04 LTS / 18.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4034-1 advisory.

    It was discovered that ImageMagick incorrectly handled certain malformed image files. If a user or     automated system using ImageMagick were tricked into opening a specially crafted image, an attacker could     exploit this to cause a denial of service or possibly execute code with the privileges of the user     invoking the program.

    Due to a large number of issues discovered in GhostScript that prevent it from being used by ImageMagick     safely, the update for Ubuntu 18.10 and Ubuntu 19.04 includes a default policy change that disables     support for the Postscript and PDF formats in ImageMagick. This policy can be overridden if necessary by     using an alternate ImageMagick policy configuration.

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for ImageMagick fixes the following issues :

Security issues fixed :

  - CVE-2019-9956: Fixed a stack-based buffer overflow in     PopHexPixel() (bsc#1130330).

  - CVE-2019-10650: Fixed a heap-based buffer over-read in     WriteTIFFImage() (bsc#1131317).

  - CVE-2019-7175: Fixed multiple memory leaks in     DecodeImage function (bsc#1128649).

  - CVE-2018-20467: Fixed infinite loop in coders/bmp.c     (bsc#1120381).

  - CVE-2019-7398: Fixed a memory leak in the function     WriteDIBImage (bsc#1124365).

  - CVE-2019-7397: Fixed a memory leak in the function     WritePDFImage (bsc#1124366).

  - CVE-2019-7395: Fixed a memory leak in the function     WritePSDChannel (bsc#1124368).

  - CVE-2018-16413: Fixed a heap-based buffer over-read in     PushShortPixel() (bsc#1106989).

  - CVE-2018-16412: Fixed a heap-based buffer over-read in     ParseImageResourceBlocks() (bsc#1106996).

  - CVE-2018-16644: Fixed a regression in dcm coder     (bsc#1107609).

  - CVE-2019-11007: Fixed a heap-based buffer overflow in     ReadMNGImage() (bsc#1132060).

  - CVE-2019-11008: Fixed a heap-based buffer overflow in     WriteXWDImage() (bsc#1132054).

  - CVE-2019-11009: Fixed a heap-based buffer over-read in     ReadXWDImage() (bsc#1132053).

  - Added extra -config- packages with Postscript/EPS/PDF     readers still enabled.

    Removing the PS decoders is used to harden ImageMagick     against security issues within ghostscript. Enabling     them might impact security. (bsc#1122033)

    These are two packages that can be selected :

  - ImageMagick-config-6-SUSE: This has the PS decoders     disabled.

  - ImageMagick-config-6-upstream: This has the PS decoders     enabled.

    Depending on your local needs install either one of     them. The default is the -SUSE configuration.

This update was imported from the SUSE:SLE-12:Update update project.

This update for ImageMagick fixes the following issues :

Security issues fixed :

CVE-2019-9956: Fixed a stack-based buffer overflow in PopHexPixel() (bsc#1130330).

CVE-2019-10650: Fixed a heap-based buffer over-read in WriteTIFFImage() (bsc#1131317).

CVE-2019-7175: Fixed multiple memory leaks in DecodeImage function (bsc#1128649).

CVE-2018-20467: Fixed infinite loop in coders/bmp.c (bsc#1120381).

CVE-2019-7398: Fixed a memory leak in the function WriteDIBImage (bsc#1124365).

CVE-2019-7397: Fixed a memory leak in the function WritePDFImage (bsc#1124366).

CVE-2019-7395: Fixed a memory leak in the function WritePSDChannel (bsc#1124368).

CVE-2018-16413: Fixed a heap-based buffer over-read in PushShortPixel() (bsc#1106989).

CVE-2018-16412: Fixed a heap-based buffer over-read in ParseImageResourceBlocks() (bsc#1106996).

CVE-2018-16644: Fixed a regression in dcm coder (bsc#1107609).

CVE-2019-11007: Fixed a heap-based buffer overflow in ReadMNGImage() (bsc#1132060).

CVE-2019-11008: Fixed a heap-based buffer overflow in WriteXWDImage() (bsc#1132054).

CVE-2019-11009: Fixed a heap-based buffer over-read in ReadXWDImage() (bsc#1132053).

Added extra -config- packages with Postscript/EPS/PDF readers still enabled.

Removing the PS decoders is used to harden ImageMagick against security issues within ghostscript. Enabling them might impact security. (bsc#1122033)

These are two packages that can be selected :

  - ImageMagick-config-6-SUSE: This has the PS decoders     disabled.

  - ImageMagick-config-6-upstream: This has the PS decoders     enabled.

    Depending on your local needs install either one of     them. The default is the -SUSE configuration.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for ImageMagick fixes the following issues :

Security issues fixed :

  - CVE-2019-7175: Fixed multiple memory leaks in     DecodeImage function (bsc#1128649).

  - CVE-2018-18544: Fixed a memory leak in the function     WriteMSLImage (bsc#1113064).

  - CVE-2018-20467: Fixed an infinite loop in coders/bmp.c     (bsc#1120381).

  - CVE-2019-7398: Fixed a memory leak in the function     WriteDIBImage (bsc#1124365).

  - CVE-2019-7396: Fixed a memory leak in the function     ReadSIXELImage (bsc#1124367).

  - CVE-2019-7395: Fixed a memory leak in the function     WritePSDChannel (bsc#1124368).

  - CVE-2019-7397: Fixed a memory leak in the function     WritePDFImage (bsc#1124366).

  - CVE-2018-16412: Prevent heap-based buffer over-read in     the ParseImageResourceBlocks function leading to DOS     (bsc#1106996).

Non-security issue fixed :

  - Fixed a regression in regards to the 'edge' comand line     flag (bsc#1106415)

This update was imported from the SUSE:SLE-15:Update update project.

This update for ImageMagick fixes the following issues :

Security issues fixed :

CVE-2019-7175: Fixed multiple memory leaks in DecodeImage function (bsc#1128649).

CVE-2018-18544: Fixed memory leak in the function WriteMSLImage (bsc#1113064).

CVE-2018-20467: Fixed infinite loop in coders/bmp.c (bsc#1120381).

CVE-2019-7397: Fixed a memory leak in the function WritePDFImage (bsc#1124366).

CVE-2018-16413: Prevent heap-based buffer over-read in the PushShortPixel function leading to DoS (bsc#1106989).

CVE-2018-16412: Prevent heap-based buffer over-read in the ParseImageResourceBlocks function leading to DOS (bsc#1106996).

CVE-2019-7398: Fixed a memory leak in the function WriteDIBImage (bsc#1124365).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for ImageMagick fixes the following issues :

Security issues fixed :

CVE-2019-7175: Fixed multiple memory leaks in DecodeImage function (bsc#1128649).

CVE-2018-18544: Fixed a memory leak in the function WriteMSLImage (bsc#1113064).

CVE-2018-20467: Fixed an infinite loop in coders/bmp.c (bsc#1120381).

CVE-2019-7398: Fixed a memory leak in the function WriteDIBImage (bsc#1124365).

CVE-2019-7396: Fixed a memory leak in the function ReadSIXELImage (bsc#1124367).

CVE-2019-7395: Fixed a memory leak in the function WritePSDChannel (bsc#1124368).

CVE-2019-7397: Fixed a memory leak in the function WritePDFImage (bsc#1124366).

CVE-2018-16412: Prevent heap-based buffer over-read in the ParseImageResourceBlocks function leading to DOS (bsc#1106996).

Non-security issue fixed: Fixed a regression in regards to the 'edge' comand line flag (bsc#1106415)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update fixes several vulnerabilities in Imagemagick, a graphical software suite. Various memory handling problems or incomplete input sanitising have been found in the coders for BMP, DIB, PICT, DCM, CUT and PSD.

Several security vulnerabilities were discovered in ImageMagick, an image manipulation program, that allow remote attackers to cause denial of service (application crash, excessive memory allocation, or other unspecified effects) or out of bounds memory access via DCM, PWP, CALS, PICT, BMP, DIB, or PNG image files.

For Debian 8 'Jessie', these problems have been fixed in version 8:6.8.9.9-5+deb8u14.

We recommend that you upgrade your imagemagick packages.

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
206141	Ubuntu 14.04 LTS : ImageMagick vulnerabilities (USN-6980-1)	Nessus	Ubuntu Local Security Checks	high
404969	Alpine: imagemagick6: security update to 6.9.10.39-r0	Tenable Cloud Security	Alpine Linux Local Security Checks	critical
404969	Alpine: imagemagick6: security update to 6.9.10.39-r0	Tenable Self-Hosted Container Security	Alpine Linux Local Security Checks	critical
404968	Alpine: imagemagick6: security update to 6.9.10.37-r0	Tenable Cloud Security	Alpine Linux Local Security Checks	critical
404968	Alpine: imagemagick6: security update to 6.9.10.37-r0	Tenable Self-Hosted Container Security	Alpine Linux Local Security Checks	critical
126254	Ubuntu 16.04 LTS / 18.04 LTS : ImageMagick vulnerabilities (USN-4034-1)	Nessus	Ubuntu Local Security Checks	high
124639	openSUSE Security Update : ImageMagick (openSUSE-2019-1320)	Nessus	SuSE Local Security Checks	high
124315	SUSE SLED12 / SLES12 Security Update : ImageMagick (SUSE-SU-2019:1033-1)	Nessus	SuSE Local Security Checks	high
123771	openSUSE Security Update : ImageMagick (openSUSE-2019-1141)	Nessus	SuSE Local Security Checks	high
123456	SUSE SLES11 Security Update : ImageMagick (SUSE-SU-2019:13993-1)	Nessus	SuSE Local Security Checks	high
123410	SUSE SLED15 / SLES15 Security Update : ImageMagick (SUSE-SU-2019:0739-1)	Nessus	SuSE Local Security Checks	high
118098	Debian DSA-4316-1 : imagemagick - security update	Nessus	Debian Local Security Checks	high
117907	Debian DLA-1530-1 : imagemagick security update	Nessus	Debian Local Security Checks	high

Detections

Analytics

CVE-2018-16412

high

Tenable Plugins

high

critical

critical

critical

critical

high

high

high

high

high

high

high

high