libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 < size. This vulnerability causes programs that use libxml2, such as PHP, to crash.

According to its self-reported version, the Nessus Network Monitor running on the remote host is prior to 6.2.2. It is, therefore, affected by multiple vulnerabilities as referenced in the TNS-2023-23 advisory. Several of the third-party components were found to contain vulnerabilities, and updated versions have been made available by the providers. Out of caution and in line with best practice, Tenable has opted to upgrade these components to address the potential impact of the issues. Nessus Network Monitor 6.2.2 updates the following components:

  - c-ares from version 1.10.0 to version 1.19.1.
  - curl from version 7.79.1 to version 8.1.2.
  - libbzip2 from version 1.0.6 to version 1.0.8.
  - libpcre from version 8.42 to version 8.44.
  - libxml2 from version 2.7.7 to version 2.11.1.
  - libxslt from version 1.1.26 to version 1.1.37.
  - libxmlsec from version 1.2.18 to version 1.2.37.
  - sqlite from version 3.27.2 to version 3.40.1.
  - jQuery Cookie from version 1.3.1 to version 1.4.1.
  - jQuery UI from version 1.13.0 to version 1.13.2.
  - OpenSSL from version 3.0.8 to version 3.0.9.

According to the versions of the libxml2 packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     heap-based buffer over-read in the xmlDictAddString     function in dict.c. This vulnerability causes programs     that use libxml2, such as PHP, to crash. This     vulnerability exists because of an incomplete fix for     CVE-2016-1839.(CVE-2017-9050)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     heap-based buffer over-read in the     xmlDictComputeFastKey function in dict.c. This     vulnerability causes programs that use libxml2, such as     PHP, to crash. This vulnerability exists because of an     incomplete fix for libxml2 Bug 759398.(CVE-2017-9049)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     stack-based buffer overflow. The function     xmlSnprintfElementContent in valid.c is supposed to     recursively dump the element content definition into a     char buffer 'buf' of size 'size'. At the end of the     routine, the function may strcat two more characters     without checking whether the current strlen(buf) + 2 <     size. This vulnerability causes programs that use     libxml2, such as PHP, to crash.(CVE-2017-9048)

  - The htmlParseTryOrFinish function in HTMLparser.c in     libxml2 2.9.4 allows attackers to cause a denial of     service (buffer over-read) or information     disclosure.(CVE-2017-8872)

  - The xz_decomp function in xzlib.c in libxml2 2.9.8, if
    --with-lzma is used, allows remote attackers to cause a     denial of service (infinite loop) via a crafted XML     file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated     by xmllint, a different vulnerability than     CVE-2015-8035.(CVE-2018-9251)

  - libxml2 2.9.8, if --with-lzma is used, allows remote     attackers to cause a denial of service (infinite loop)     via a crafted XML file that triggers     LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a     different vulnerability than CVE-2015-8035 and     CVE-2018-9251.(CVE-2018-14567)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the libxml2 packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - This library allows to manipulate XML files. It     includes support to read, modify and write XML and HTML     files. There is DTDs support this includes parsing and     validation even with complex DtDs, either at parse time     or later once the document has been modified. The     output can be a simple SAX stream or and in-memory DOM     like representations. In this case one can use the     built-in XPath and XPointer implementation to select     sub nodes or ranges. A flexible Input/Output mechanism     is available, with existing HTTP and FTP modules and     combined to an URI library.Security Fix(es):** DISPUTED
    ** libxml2 2.9.4, when used in recover mode, allows     remote attackers to cause a denial of service (NULL     pointer dereference) via a crafted XML document. NOTE:
    The maintainer states 'I would disagree of a CVE with     the Recover parsing option which should only be used     for manual recovery at least for XML     parser.'(CVE-2017-5969)A NULL pointer dereference     vulnerability exists in the     xpath.c:xmlXPathCompOpEval() function of libxml2     through 2.9.8 when parsing an invalid XPath expression     in the XPATH_OP_AND or XPATH_OP_OR case. Applications     processing untrusted XSL format inputs with the use of     the libxml2 library may be vulnerable to a denial of     service attack due to a crash of the     application.(CVE-2018-14404)libxml2 2.9.8, if
    --with-lzma is used, allows remote attackers to cause a     denial of service (infinite loop) via a crafted XML     file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated     by xmllint, a different vulnerability than     CVE-2015-8035 and CVE-2018-9251.(CVE-2018-14567)libxml2     20904-GITv2.9.4-16-g0741801 is vulnerable to a     heap-based buffer over-read in the     xmlDictComputeFastKey function in dict.c. This     vulnerability causes programs that use libxml2, such as     PHP, to crash. This vulnerability exists because of an     incomplete fix for libxml2 Bug     759398.(CVE-2017-9049)libxml2     20904-GITv2.9.4-16-g0741801 is vulnerable to a     stack-based buffer overflow. The function     xmlSnprintfElementContent in valid.c is supposed to     recursively dump the element content definition into a     char buffer 'buf' of size 'size'. At the end of the     routine, the function may strcat two more characters     without checking whether the current strlen(buf) + 2 <     size. This vulnerability causes programs that use     libxml2, such as PHP, to crash.(CVE-2017-9048)The     htmlParseTryOrFinish function in HTMLparser.c in     libxml2 2.9.4 allows attackers to cause a denial of     service (buffer over-read) or information     disclosure.(CVE-2017-8872)The xz_decomp function in     xzlib.c in libxml2 2.9.1 does not properly detect     compression errors, which allows context-dependent     attackers to cause a denial of service (process hang)     via crafted XML data.(CVE-2015-8035)The xz_head     function in xzlib.c in libxml2 before 2.9.6 allows     remote attackers to cause a denial of service (memory     consumption) via a crafted LZMA file, because the     decoder functionality does not restrict memory usage to     what is required for a legitimate file.(CVE-2017-18258)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the libxml2 packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - A remote code execution vulnerability in libxml2 could     enable an attacker using a specially crafted file to     execute arbitrary code within the context of an     unprivileged process. This issue is rated as High due     to the possibility of remote code execution in an     application that uses this library. Product: Android.
    Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1,     7.1.2. Android ID: A-37104170.(CVE-2017-0663)

  - libxml2 2.9.8, if --with-lzma is used, allows remote     attackers to cause a denial of service (infinite loop)     via a crafted XML file that triggers     LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a     different vulnerability than CVE-2015-8035 and     CVE-2018-9251.(CVE-2018-14567)

  - The htmlParseTryOrFinish function in HTMLparser.c in     libxml2 2.9.4 allows attackers to cause a denial of     service (buffer over-read) or information     disclosure.(CVE-2017-8872)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     stack-based buffer overflow. The function     xmlSnprintfElementContent in valid.c is supposed to     recursively dump the element content definition into a     char buffer 'buf' of size 'size'. At the end of the     routine, the function may strcat two more characters     without checking whether the current strlen(buf) + 2 <     size. This vulnerability causes programs that use     libxml2, such as PHP, to crash.(CVE-2017-9048)

  - The xz_decomp function in xzlib.c in libxml2 2.9.1 does     not properly detect compression errors, which allows     context-dependent attackers to cause a denial of     service (process hang) via crafted XML     data.(CVE-2015-8035)

  - The xz_head function in xzlib.c in libxml2 before 2.9.6     allows remote attackers to cause a denial of service     (memory consumption) via a crafted LZMA file, because     the decoder functionality does not restrict memory     usage to what is required for a legitimate     file.(CVE-2017-18258)

  - ** DISPUTED ** libxml2 2.9.4, when used in recover     mode, allows remote attackers to cause a denial of     service (NULL pointer dereference) via a crafted XML     document. NOTE: The maintainer states 'I would disagree     of a CVE with the Recover parsing option which should     only be used for manual recovery at least for XML     parser.'(CVE-2017-5969)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the libxml2 packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - dict.c in libxml2 allows remote attackers to cause a     denial of service (heap-based buffer over-read and     application crash) via an unexpected character     immediately after the '<!DOCTYPE html' substring in a     crafted HTML document.(CVE-2015-8806)

  - libxml2 2.9.4, when used in recover mode, allows remote     attackers to cause a denial of service (NULL pointer     dereference) via a crafted XML document. NOTE: The     maintainer states 'I would disagree of a CVE with the     Recover parsing option which should only be used for     manual recovery at least for XML     parser.'(CVE-2017-5969)

  - The htmlParseTryOrFinish function in HTMLparser.c in     libxml2 2.9.4 allows attackers to cause a denial of     service (buffer over-read) or information     disclosure.(CVE-2017-8872)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     stack-based buffer overflow. The function     xmlSnprintfElementContent in valid.c is supposed to     recursively dump the element content definition into a     char buffer 'buf' of size 'size'. At the end of the     routine, the function may strcat two more characters     without checking whether the current strlen(buf) + 2 <     size. This vulnerability causes programs that use     libxml2, such as PHP, to crash.(CVE-2017-9048)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     heap-based buffer over-read in the     xmlDictComputeFastKey function in dict.c. This     vulnerability causes programs that use libxml2, such as     PHP, to crash. This vulnerability exists because of an     incomplete fix for libxml2 Bug 759398.(CVE-2017-9049)

  - libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a     heap-based buffer over-read in the xmlDictAddString     function in dict.c. This vulnerability causes programs     that use libxml2, such as PHP, to crash. This     vulnerability exists because of an incomplete fix for     CVE-2016-1839.(CVE-2017-9050)

  - The xz_decomp function in xzlib.c in libxml2 2.9.8, if
    --with-lzma is used, allows remote attackers to cause a     denial of service (infinite loop) via a crafted XML     file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated     by xmllint, a different vulnerability than     CVE-2015-8035.(CVE-2018-9251)

  - libxml2 2.9.8, if --with-lzma is used, allows remote     attackers to cause a denial of service (infinite loop)     via a crafted XML file that triggers     LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint, a     different vulnerability than CVE-2015-8035 and     CVE-2018-9251.(CVE-2018-14567)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

An update of the libxml2 package has been released.

libxml2 developers report :

The htmlParseTryOrFinish function in HTMLparser.c in libxml2 2.9.4 allows attackers to cause a denial of service (buffer over-read) or information disclosure.

A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. The variable len is assigned strlen(buf). If the content->type is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content->prefix is appended to buf (if it actually fits) whereupon (ii) content->name is written to the buffer. However, the check for whether the content->name actually fits also uses 'len' rather than the updated buffer length strlen(buf). This allows us to write about 'size' many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a stack-based buffer overflow. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. At the end of the routine, the function may strcat two more characters without checking whether the current strlen(buf) + 2 < size. This vulnerability causes programs that use libxml2, such as PHP, to crash.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash.
This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.

libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictAddString function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash.
This vulnerability exists because of an incomplete fix for CVE-2016-1839.

The remote host is affected by the vulnerability described in GLSA-201711-01 (libxml2: Multiple vulnerabilities)

    Multiple vulnerabilities have been discovered in libxml2. Please review       the CVE identifiers referenced below for details.
  Impact :

    A remote attacker, by enticing a user to process a specially crafted XML       document, could remotely execute arbitrary code, conduct XML External       Entity (XXE) attacks, or cause a Denial of Service condition.
  Workaround :

    There is no known workaround at this time.

It was discovered that a type confusion error existed in libxml2. An attacker could use this to specially construct XML data that could cause a denial of service or possibly execute arbitrary code.
(CVE-2017-0663)

It was discovered that libxml2 did not properly validate parsed entity references. An attacker could use this to specially construct XML data that could expose sensitive information. (CVE-2017-7375)

It was discovered that a buffer overflow existed in libxml2 when handling HTTP redirects. An attacker could use this to specially construct XML data that could cause a denial of service or possibly execute arbitrary code. (CVE-2017-7376)

Marcel Bohme and Van-Thuan Pham discovered a buffer overflow in libxml2 when handling elements. An attacker could use this to specially construct XML data that could cause a denial of service or possibly execute arbitrary code. (CVE-2017-9047)

Marcel Bohme and Van-Thuan Pham discovered a buffer overread in libxml2 when handling elements. An attacker could use this to specially construct XML data that could cause a denial of service.
(CVE-2017-9048)

Marcel Bohme and Van-Thuan Pham discovered multiple buffer overreads in libxml2 when handling parameter-entity references. An attacker could use these to specially construct XML data that could cause a denial of service. (CVE-2017-9049, CVE-2017-9050).

Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several vulnerabilities were discovered in libxml2, a library providing support to read, modify and write XML and HTML files. A remote attacker could provide a specially crafted XML or HTML file that, when processed by an application using libxml2, would cause a denial-of-service against the application, information leaks, or potentially, the execution of arbitrary code with the privileges of the user running the application.

CVE-2017-7375 Missing validation for external entities in xmlParsePEReference

CVE-2017-9047 CVE-2017-9048 A buffer overflow was discovered in libxml2 20904-GITv2.9.4-16-g0741801. The function xmlSnprintfElementContent in valid.c is supposed to recursively dump the element content definition into a char buffer 'buf' of size 'size'. The variable len is assigned strlen(buf). If the content->type is XML_ELEMENT_CONTENT_ELEMENT, then (i) the content->prefix is appended to buf (if it actually fits) whereupon (ii) content->name is written to the buffer. However, the check for whether the content->name actually fits also uses 'len' rather than the updated buffer length strlen(buf). This allows us to write about 'size' many bytes beyond the allocated memory. This vulnerability causes programs that use libxml2, such as PHP, to crash.

CVE-2017-9049 CVE-2017-9050 libxml2 20904-GITv2.9.4-16-g0741801 is vulnerable to a heap-based buffer over-read in the xmlDictComputeFastKey function in dict.c. This vulnerability causes programs that use libxml2, such as PHP, to crash. This vulnerability exists because of an incomplete fix for libxml2 Bug 759398.

For Debian 7 'Wheezy', these problems have been fixed in version 2.8.0+dfsg1-7+wheezy8.

We recommend that you upgrade your libxml2 packages.

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for libxml2 fixes the following security issues :

  - CVE-2017-9050: A heap-based buffer over-read in     xmlDictAddString (bsc#1039069, bsc#1039661)

  - CVE-2017-9049: A heap-based buffer overflow in     xmlDictComputeFastKey (bsc#1039066)

  - CVE-2017-9048: A stack overflow vulnerability in     xmlSnprintfElementContent (bsc#1039063)

  - CVE-2017-9047: A stack overflow vulnerability in     xmlSnprintfElementContent (bsc#1039064)

This update was imported from the SUSE:SLE-12-SP2:Update update project.

This update for libxml2 fixes the following issues :

  - CVE-2017-9050: heap-based buffer overflow     (xmlDictAddString func) [bsc#1039069, bsc#1039661]

  - CVE-2017-9049: heap-based buffer overflow     (xmlDictComputeFastKey func) [bsc#1039066]

  - CVE-2017-9048: stack overflow vulnerability     (xmlSnprintfElementContent func) [bsc#1039063]

  - CVE-2017-9047: stack overflow vulnerability     (xmlSnprintfElementContent func) [bsc#1039064]

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for libxml2 fixes the following issues: Security issues fixed :

  - CVE-2017-9050: heap-based buffer overflow     (xmlDictAddString func) [bsc#1039069, bsc#1039661]

  - CVE-2017-9049: heap-based buffer overflow     (xmlDictComputeFastKey func) [bsc#1039066]

  - CVE-2017-9048: stack overflow vulnerability     (xmlSnprintfElementContent func) [bsc#1039063]

  - CVE-2017-9047: stack overflow vulnerability     (xmlSnprintfElementContent func) [bsc#1039064] A     clarification for the previously released update: For     CVE-2016-9318 we decided not to ship a fix since it can     break existing setups. Please take appropriate actions     if you parse untrusted XML files and use the new

-noxxe flag if possible (bnc#1010675, bnc#1013930).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for libxml2 fixes the following security issues :

  - CVE-2017-9050: A heap-based buffer over-read in     xmlDictAddString (bsc#1039069, bsc#1039661)

  - CVE-2017-9049: A heap-based buffer overflow in     xmlDictComputeFastKey (bsc#1039066)

  - CVE-2017-9048: A stack overflow vulnerability in     xmlSnprintfElementContent (bsc#1039063)

  - CVE-2017-9047: A stack overflow vulnerability in     xmlSnprintfElementContent (bsc#1039064)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for libxml2 fixes the following issues :

  - CVE-2017-9047, CVE-2017-9048: The function     xmlSnprintfElementContent in valid.c was vulnerable to a     stack-based buffer overflow (bsc#1039063, bsc#1039064)

  - CVE-2017-9049: The function xmlDictComputeFastKey in     dict.c was vulnerable to a heap-based buffer over-read.
    (bsc#1039066)

  - CVE-2017-9050: The function xmlDictAddString was     vulnerable to a heap-based buffer over-read     (bsc#1039661)

  - CVE-2016-1839: heap-based buffer overflow     (xmlDictAddString func) (bnc#1039069)

This update was imported from the SUSE:SLE-12-SP2:Update update project.

This update for libxml2 fixes the following issues :

  - CVE-2017-9047, CVE-2017-9048: The function     xmlSnprintfElementContent in valid.c was vulnerable to a     stack-based buffer overflow (bsc#1039063, bsc#1039064)

  - CVE-2017-9049: The function xmlDictComputeFastKey in     dict.c was vulnerable to a heap-based buffer over-read.
    (bsc#1039066)

  - CVE-2017-9050: The function xmlDictAddString was     vulnerable to a heap-based buffer over-read     (bsc#1039661)

  - CVE-2016-1839: heap-based buffer overflow     (xmlDictAddString func) (bnc#1039069)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
177842	Nessus Network Monitor < 6.2.2 Multiple Vulnerabilities (TNS-2023-23)	Nessus	Misc.	critical
134734	EulerOS Virtualization 3.0.2.2 : libxml2 (EulerOS-SA-2020-1268)	Nessus	Huawei Local Security Checks	critical
132161	EulerOS 2.0 SP3 : libxml2 (EulerOS-SA-2019-2626)	Nessus	Huawei Local Security Checks	critical
131644	EulerOS 2.0 SP2 : libxml2 (EulerOS-SA-2019-2491)	Nessus	Huawei Local Security Checks	critical
130673	EulerOS 2.0 SP5 : libxml2 (EulerOS-SA-2019-2211)	Nessus	Huawei Local Security Checks	critical
121711	Photon OS 1.0: Libxml2 PHSA-2017-0024	Nessus	PhotonOS Local Security Checks	high
105216	FreeBSD : libxml2 -- Multiple Issues (76e59f55-4f7a-4887-bcb0-11604004163a)	Nessus	FreeBSD Local Security Checks	critical
104492	GLSA-201711-01 : libxml2: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	critical
103327	Ubuntu 14.04 LTS / 16.04 LTS : libxml2 vulnerabilities (USN-3424-1)	Nessus	Ubuntu Local Security Checks	critical
102685	Debian DSA-3952-1 : libxml2 - security update	Nessus	Debian Local Security Checks	critical
101174	Debian DLA-1008-1 : libxml2 security update	Nessus	Debian Local Security Checks	critical
100884	openSUSE Security Update : libxml2 (openSUSE-2017-711)	Nessus	SuSE Local Security Checks	high
100867	SUSE SLES12 Security Update : libxml2 (SUSE-SU-2017:1587-1)	Nessus	SuSE Local Security Checks	high
100780	SUSE SLES11 Security Update : libxml2 (SUSE-SU-2017:1557-1)	Nessus	SuSE Local Security Checks	high
100754	SUSE SLED12 / SLES12 Security Update : libxml2 (SUSE-SU-2017:1538-1)	Nessus	SuSE Local Security Checks	high
100708	openSUSE Security Update : libxml2 (openSUSE-2017-663)	Nessus	SuSE Local Security Checks	high
100544	SUSE SLED12 / SLES12 Security Update : libxml2 (SUSE-SU-2017:1454-1)	Nessus	SuSE Local Security Checks	high

Detections

Analytics

CVE-2017-9048

high

Tenable Plugins

critical

critical

critical

critical

critical

high

critical

critical

critical

critical

critical

high

high

high

high

high

high