Nutanix AOS : Multiple Vulnerabilities (NXSA-AOS-5.16.1.3)

critical Nessus Plugin ID 164582

Language:

Synopsis

The Nutanix AOS host is affected by multiple vulnerabilities .

Description

The version of AOS installed on the remote host is prior to 5.16.1.3. It is, therefore, affected by multiple vulnerabilities as referenced in the NXSA-AOS-5.16.1.3 advisory.

- The Linux kernel before 5.1-rc5 allows page->_refcount reference count overflow, with resultant use-after- free issues, if about 140 GiB of RAM exists. This is related to fs/fuse/dev.c, fs/pipe.c, fs/splice.c, include/linux/mm.h, include/linux/pipe_fs_i.h, kernel/trace/trace.c, mm/gup.c, and mm/hugetlb.c. It can occur with FUSE requests. (CVE-2019-11487)

- rtl_p2p_noa_ie in drivers/net/wireless/realtek/rtlwifi/ps.c in the Linux kernel through 5.3.6 lacks a certain upper-bound check, leading to a buffer overflow. (CVE-2019-17666)

- A flaw was found in the fix for CVE-2019-11135, in the Linux upstream kernel versions before 5.5 where, the way Intel CPUs handle speculative execution of instructions when a TSX Asynchronous Abort (TAA) error occurs. When a guest is running on a host CPU affected by the TAA flaw (TAA_NO=0), but is not affected by the MDS issue (MDS_NO=1), the guest was to clear the affected buffers by using a VERW instruction mechanism. But when the MDS_NO=1 bit was exported to the guests, the guests did not use the VERW mechanism to clear the affected buffers. This issue affects guests running on Cascade Lake CPUs and requires that host has 'TSX' enabled. Confidentiality of data is the highest threat associated with this vulnerability.
(CVE-2019-19338)

- The Requests package before 2.20.0 for Python sends an HTTP Authorization header to an http URI upon receiving a same-hostname https-to-http redirect, which makes it easier for remote attackers to discover credentials by sniffing the network. (CVE-2018-18074)

- urllib3 before version 1.23 does not remove the Authorization HTTP header when following a cross-origin redirect (i.e., a redirect that differs in host, port, or scheme). This can allow for credentials in the Authorization header to be exposed to unintended hosts or transmitted in cleartext. (CVE-2018-20060)

- In the urllib3 library through 1.24.1 for Python, CRLF injection is possible if the attacker controls the request parameter. (CVE-2019-11236)

- The urllib3 library before 1.24.2 for Python mishandles certain cases where the desired set of CA certificates is different from the OS store of CA certificates, which results in SSL connections succeeding in situations where a verification failure is the correct outcome. This is related to use of the ssl_context, ca_certs, or ca_certs_dir argument. (CVE-2019-11324)

- The HTTP/2 implementation in Apache Tomcat 9.0.0.M1 to 9.0.14 and 8.5.0 to 8.5.37 accepted streams with excessive numbers of SETTINGS frames and also permitted clients to keep streams open without reading/writing request/response data. By keeping streams open for requests that utilised the Servlet API's blocking I/O, clients were able to cause server-side threads to block eventually leading to thread exhaustion and a DoS. (CVE-2019-0199)

- The fix for CVE-2019-0199 was incomplete and did not address HTTP/2 connection window exhaustion on write in Apache Tomcat versions 9.0.0.M1 to 9.0.19 and 8.5.0 to 8.5.40 . By not sending WINDOW_UPDATE messages for the connection window (stream 0) clients were able to cause server-side threads to block eventually leading to thread exhaustion and a DoS. (CVE-2019-10072)

- When Apache Tomcat 9.0.0.M1 to 9.0.28, 8.5.0 to 8.5.47, 7.0.0 and 7.0.97 is configured with the JMX Remote Lifecycle Listener, a local attacker without access to the Tomcat process or configuration files is able to manipulate the RMI registry to perform a man-in-the-middle attack to capture user names and passwords used to access the JMX interface. The attacker can then use these credentials to access the JMX interface and gain complete control over the Tomcat instance. (CVE-2019-12418)

- When using FORM authentication with Apache Tomcat 9.0.0.M1 to 9.0.29, 8.5.0 to 8.5.49 and 7.0.0 to 7.0.98 there was a narrow window where an attacker could perform a session fixation attack. The window was considered too narrow for an exploit to be practical but, erring on the side of caution, this issue has been treated as a security vulnerability. (CVE-2019-17563)

- The refactoring present in Apache Tomcat 9.0.28 to 9.0.30, 8.5.48 to 8.5.50 and 7.0.98 to 7.0.99 introduced a regression. The result of the regression was that invalid Transfer-Encoding headers were incorrectly processed leading to a possibility of HTTP Request Smuggling if Tomcat was located behind a reverse proxy that incorrectly handled the invalid Transfer-Encoding header in a particular manner. Such a reverse proxy is considered unlikely. (CVE-2019-17569)

- A specially crafted sequence of HTTP/2 requests sent to Apache Tomcat 10.0.0-M1 to 10.0.0-M5, 9.0.0.M1 to 9.0.35 and 8.5.0 to 8.5.55 could trigger high CPU usage for several seconds. If a sufficient number of such requests were made on concurrent HTTP/2 connections, the server could become unresponsive.
(CVE-2020-11996)

- An h2c direct connection to Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M5 to 9.0.36 and 8.5.1 to 8.5.56 did not release the HTTP/1.1 processor after the upgrade to HTTP/2. If a sufficient number of such requests were made, an OutOfMemoryException could occur leading to a denial of service. (CVE-2020-13934)

- The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service. (CVE-2020-13935)

- In Apache Tomcat 9.0.0.M1 to 9.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99 the HTTP header parsing code used an approach to end-of-line parsing that allowed some invalid HTTP headers to be parsed as valid. This led to a possibility of HTTP Request Smuggling if Tomcat was located behind a reverse proxy that incorrectly handled the invalid Transfer-Encoding header in a particular manner. Such a reverse proxy is considered unlikely. (CVE-2020-1935)

- When using the Apache JServ Protocol (AJP), care must be taken when trusting incoming connections to Apache Tomcat. Tomcat treats AJP connections as having higher trust than, for example, a similar HTTP connection. If such connections are available to an attacker, they can be exploited in ways that may be surprising. In Apache Tomcat 9.0.0.M1 to 9.0.0.30, 8.5.0 to 8.5.50 and 7.0.0 to 7.0.99, Tomcat shipped with an AJP Connector enabled by default that listened on all configured IP addresses. It was expected (and recommended in the security guide) that this Connector would be disabled if not required. This vulnerability report identified a mechanism that allowed: - returning arbitrary files from anywhere in the web application - processing any file in the web application as a JSP Further, if the web application allowed file upload and stored those files within the web application (or the attacker was able to control the content of the web application by some other means) then this, along with the ability to process a file as a JSP, made remote code execution possible. It is important to note that mitigation is only required if an AJP port is accessible to untrusted users. Users wishing to take a defence-in-depth approach and block the vector that permits returning arbitrary files and execution as JSP may upgrade to Apache Tomcat 9.0.31, 8.5.51 or 7.0.100 or later. A number of changes were made to the default AJP Connector configuration in 9.0.31 to harden the default configuration. It is likely that users upgrading to 9.0.31, 8.5.51 or 7.0.100 or later will need to make small changes to their configurations.
(CVE-2020-1938)

- When using Apache Tomcat versions 10.0.0-M1 to 10.0.0-M4, 9.0.0.M1 to 9.0.34, 8.5.0 to 8.5.54 and 7.0.0 to 7.0.103 if a) an attacker is able to control the contents and name of a file on the server; and b) the server is configured to use the PersistenceManager with a FileStore; and c) the PersistenceManager is configured with sessionAttributeValueClassNameFilter=null (the default unless a SecurityManager is used) or a sufficiently lax filter to allow the attacker provided object to be deserialized; and d) the attacker knows the relative file path from the storage location used by FileStore to the file the attacker has control over; then, using a specifically crafted request, the attacker will be able to trigger remote code execution via deserialization of the file under their control. Note that all of conditions a) to d) must be true for the attack to succeed. (CVE-2020-9484)

- An issue was discovered in International Components for Unicode (ICU) for C/C++ through 66.1. An integer overflow, leading to a heap-based buffer overflow, exists in the UnicodeString::doAppend() function in common/unistr.cpp. (CVE-2020-10531)

- TSX Asynchronous Abort condition on some CPUs utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access. (CVE-2019-11135)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Solution

Update the Nutanix AOS software to recommended version.

Plugin Details

Severity: Critical

ID: 164582

File Name: nutanix_NXSA-AOS-5_16_1_3.nasl

Version: 1.7

Type: local

Family: Misc.

Published: 9/1/2022

Updated: 2/7/2024

Supported Sensors: Nessus

Risk Information

VPR

Risk Factor: Critical

Score: 9.0

CVSS v2

Risk Factor: High

Base Score: 8.3

Temporal Score: 7.2

Vector: CVSS2#AV:A/AC:L/Au:N/C:C/I:C/A:C

CVSS Score Source: CVE-2019-17666

CVSS v3

Risk Factor: Critical

Base Score: 9.8

Temporal Score: 9.4

Vector: CVSS:3.0/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Temporal Vector: CVSS:3.0/E:H/RL:O/RC:C

CVSS Score Source: CVE-2020-1938

Vulnerability Information

CPE: cpe:/o:nutanix:aos

Required KB Items: Host/Nutanix/Data/lts, Host/Nutanix/Data/Service, Host/Nutanix/Data/Version, Host/Nutanix/Data/arch

Exploit Available: true

Exploit Ease: Exploits are available

Patch Publication Date: 8/24/2022

Vulnerability Publication Date: 3/26/2018

CISA Known Exploited Vulnerability Due Dates: 3/17/2022

Reference Information

CVE: CVE-2018-18074, CVE-2018-20060, CVE-2019-0199, CVE-2019-10072, CVE-2019-11135, CVE-2019-11236, CVE-2019-11324, CVE-2019-11487, CVE-2019-12418, CVE-2019-17563, CVE-2019-17569, CVE-2019-17666, CVE-2019-19338, CVE-2020-10531, CVE-2020-11996, CVE-2020-13934, CVE-2020-13935, CVE-2020-1935, CVE-2020-1938, CVE-2020-9484

Detections

Analytics