An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the block advance was non-zero, potentially leading to an infinite loop on load.

The version of python-pillow installed on the remote host is prior to 2.0.0-23.gitd1c6db8. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2023-2083 advisory.

  - Pillow before 2.7.0 allows remote attackers to cause a denial of service via a compressed text chunk in a     PNG image that has a large size when it is decompressed. (CVE-2014-9601)

  - Pillow before 3.3.2 allows context-dependent attackers to execute arbitrary code by using the crafted     image file approach, related to an Insecure Sign Extension issue affecting the ImagingNew in Storage.c     component. (CVE-2016-9190)

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2023-146 advisory.

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is an out-of-bounds read in     TiffreadRGBATile via invalid tile boundaries. (CVE-2021-25291)

  - An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
    (CVE-2021-25293)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large. (CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large. (CVE-2021-27923)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

  - Pillow before 9.2.0 performs Improper Handling of Highly Compressed GIF Data (Data Amplification).
    (CVE-2022-45198)

  - Pillow before 9.3.0 allows denial of service via SAMPLESPERPIXEL. (CVE-2022-45199)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The package pillow 5.2.0 and before 8.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS)     via the getrgb function. (CVE-2021-23437)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

  - path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path. (CVE-2022-22815)

  - path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of     ImagePath.Path. (CVE-2022-22816)

  - PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that     use the Python exec method. A lambda expression could also be used. (CVE-2022-22817)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The version of python-pillow installed on the remote host is prior to 2.0.0-23.gitd1c6db8. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2022-1786 advisory.

  - PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that     use the Python exec method. A lambda expression could also be used, (CVE-2022-22817)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - path_getbbox in path.c in Pillow before 9.0.0 improperly initializes ImagePath.Path. (CVE-2022-22815)

  - path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of     ImagePath.Path. (CVE-2022-22816)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The package pillow 5.2.0 and before 8.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS)     via the getrgb function. (CVE-2021-23437)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Rocky Linux 8 host has packages installed that are affected by a vulnerability as referenced in the RLSA-2021:4149 advisory.

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote AlmaLinux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the ALSA-2021:4149 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_graya_la. (CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_gray_i. (CVE-2021-25288)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. (CVE-2021-25292)

  - An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
    (CVE-2021-25293)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large. (CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large. (CVE-2021-27923)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data. (CVE-2021-28678)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote host is affected by the vulnerability described in GLSA-202107-33 (Pillow: Multiple vulnerabilities)

    Multiple vulnerabilities have been discovered in Pillow. Please review       the CVE identifiers referenced below for details.
  Impact :

    Please review the referenced CVE identifiers for details.
  Workaround :

    There is no known workaround at this time.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The package pillow 5.2.0 and before 8.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS)     via the getrgb function. (CVE-2021-23437)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The package pillow 5.2.0 and before 8.3.2 are vulnerable to Regular Expression Denial of Service (ReDoS)     via the getrgb function. (CVE-2021-23437)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Redhat Enterprise Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the RHSA-2021:4149 advisory.

  - python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)

  - python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

  - python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287, CVE-2021-25288)

  - python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)

  - python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)

  - python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)

  - python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)

  - python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)

  - python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)

  - python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)

  - python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)

  - python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)

  - python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)

  - python-pillow: Buffer overflow in image convert function (CVE-2021-34552)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote CentOS Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the CESA-2021:4149 advisory.

  - python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)

  - python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

  - python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287, CVE-2021-25288)

  - python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)

  - python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)

  - python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)

  - python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)

  - python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)

  - python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)

  - python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)

  - python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)

  - python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)

  - python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)

  - python-pillow: Buffer overflow in image convert function (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.1.1. In     TiffDecode.c, there is a negative-offset memcpy with an     invalid size.(CVE-2021-25290)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_graya_la.(CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.(CVE-2021-25288)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for a     BLP container, and thus an attempted memory allocation     can be very large.(CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICNS container, and thus an attempted memory     allocation can be very large.(CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICO container, and thus an attempted memory     allocation can be very large.(CVE-2021-27923)

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP     data, BlpImagePlugin did not properly check that reads     (after jumping to file offsets) returned data. This     could lead to a DoS where the decoder could be run a     large number of times on empty data.(CVE-2021-28678)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for a     BLP container, and thus an attempted memory allocation     can be very large.(CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICNS container, and thus an attempted memory     allocation can be very large.(CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICO container, and thus an attempted memory     allocation can be very large.(CVE-2021-27923)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte     buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are     mishandled.(CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP     data, BlpImagePlugin did not properly check that reads     (after jumping to file offsets) returned data. This     could lead to a DoS where the decoder could be run a     large number of times on empty data.(CVE-2021-28678)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_graya_la.(CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.(CVE-2021-25288)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Debian 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-2716 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICO container, and thus an attempted memory     allocation can be very large. (CVE-2021-27923)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for     an ICNS container, and thus an attempted memory     allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial     of service (memory consumption) because the reported     size of a contained image is not properly checked for a     BLP container, and thus an attempted memory allocation     can be very large. (CVE-2021-27921)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte     buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are     mishandled.(CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0. For EPS     data, the readline implementation used in EPSImageFile     has to deal with any combination of \r and \n as line     endings. It used an accidentally quadratic method of     accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a DoS of     Pillow in the open phase, before an image was accepted     for opening.(CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For FLI     data, FliDecode did not properly check that the block     advance was non-zero, potentially leading to an     infinite loop on load.(CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_graya_la.(CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. For BLP     data, BlpImagePlugin did not properly check that reads     (after jumping to file offsets) returned data. This     could lead to a DoS where the decoder could be run a     large number of times on empty data.(CVE-2021-28678)

  - An issue was discovered in Pillow before 8.2.0. There     is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.(CVE-2021-25288)

  - An issue was discovered in Pillow before 8.2.0.
    PSDImagePlugin.PsdImageFile lacked a sanity check on     the number of input layers relative to the size of the     data block. This could lead to a DoS on Image.open     prior to Image.load.(CVE-2021-28675)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 18.04 LTS / 20.04 LTS / 20.10 / 21.04 host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4963-1 advisory. Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

python-pillow reports :

This release fixes several vulnerabilities found with `OSS-Fuzz`.

- `CVE-2021-25288`: Fix OOB read in Jpeg2KDecode. This dates to Pillow 2.4.0.

- `CVE-2021-28675`: Fix DOS in PsdImagePlugin. This dates to the PIL fork.

- `CVE-2021-28676`: Fix FLI DOS. This dates to the PIL fork.

- `CVE-2021-28677`: Fix EPS DOS on _open. This dates to the PIL fork.

- `CVE-2021-28678`: Fix BLP DOS. This dates to Pillow 5.1.0.

- Fix memory DOS in ImageFont. This dates to the PIL fork.

ID	Name	Product	Family	Severity
176924	Amazon Linux 2 : python-pillow (ALAS-2023-2083)	Nessus	Amazon Linux Local Security Checks	critical
173344	Amazon Linux 2023 : python3-pillow, python3-pillow-devel, python3-pillow-tk (ALAS2023-2023-146)	Nessus	Amazon Linux Local Security Checks	critical
170849	EulerOS Virtualization 3.0.2.2 : python-pillow (EulerOS-SA-2023-1288)	Nessus	Huawei Local Security Checks	critical
160268	Amazon Linux 2 : python-pillow (ALAS-2022-1786)	Nessus	Amazon Linux Local Security Checks	critical
157943	EulerOS Virtualization 3.0.6.6 : python-pillow (EulerOS-SA-2022-1142)	Nessus	Huawei Local Security Checks	critical
157787	Rocky Linux 8 : python-pillow (RLSA-2021:4149)	Nessus	Rocky Linux Local Security Checks	critical
157623	AlmaLinux 8 : python-pillow (ALSA-2021:4149)	Nessus	Alma Linux Local Security Checks	critical
156973	GLSA-202107-33 : Pillow: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	critical
156496	EulerOS Virtualization 3.0.2.6 : python-pillow (EulerOS-SA-2021-2893)	Nessus	Huawei Local Security Checks	critical
156381	EulerOS Virtualization 3.0.2.0 : python-pillow (EulerOS-SA-2021-2843)	Nessus	Huawei Local Security Checks	critical
155178	RHEL 8 : python-pillow (RHSA-2021:4149)	Nessus	Red Hat Local Security Checks	critical
155033	CentOS 8 : python-pillow (CESA-2021:4149)	Nessus	CentOS Local Security Checks	critical
153337	EulerOS 2.0 SP2 : python-pillow (EulerOS-SA-2021-2432)	Nessus	Huawei Local Security Checks	high
153055	EulerOS 2.0 SP5 : python-pillow (EulerOS-SA-2021-2345)	Nessus	Huawei Local Security Checks	high
152397	EulerOS 2.0 SP8 : python-pillow (EulerOS-SA-2021-2314)	Nessus	Huawei Local Security Checks	critical
152314	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-2253)	Nessus	Huawei Local Security Checks	critical
152285	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-2279)	Nessus	Huawei Local Security Checks	critical
152012	Debian DLA-2716-1 : pillow - LTS security update	Nessus	Debian Local Security Checks	critical
151567	EulerOS Virtualization 2.9.0 : python-pillow (EulerOS-SA-2021-2209)	Nessus	Huawei Local Security Checks	critical
151547	EulerOS Virtualization 2.9.1 : python-pillow (EulerOS-SA-2021-2187)	Nessus	Huawei Local Security Checks	critical
149818	Ubuntu 18.04 LTS / 20.04 LTS : Pillow vulnerabilities (USN-4963-1)	Nessus	Ubuntu Local Security Checks	critical
149464	FreeBSD : Pillow -- multiple vulnerabilities (f947aa26-b2f9-11eb-a5f7-a0f3c100ae18)	Nessus	FreeBSD Local Security Checks	critical

Detections

Analytics

CVE-2021-28676

high

Tenable Plugins

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

high

high

critical

critical

critical

critical

critical

critical

critical

critical