In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A remote attacker could potentially cause a denial of service or code execution, during service discovery, due to a redundant disconnect MGMT event.

The remote Rocky Linux 8 host has packages installed that are affected by a vulnerability as referenced in the RLSA-2021:1598 advisory.

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote NewStart CGSL host, running version MAIN 6.02, has bluez packages installed that are affected by a vulnerability:

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the bluez packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote AlmaLinux 8 host has packages installed that are affected by a vulnerability as referenced in the ALSA-2021:1598 advisory.

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the bluez package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the bluez packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the version of the bluez packages installed, the EulerOS installation on the remote host is affected by the following vulnerability :

  - In BlueZ before 5.55, a double free was found in the     gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of     service or code execution, during service discovery,     due to a redundant disconnect MGMT event.
    (CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the version of the bluez packages installed, the EulerOS installation on the remote host is affected by the following vulnerability :

  - In BlueZ before 5.55, a double free was found in the     gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of     service or code execution, during service discovery,     due to a redundant disconnect MGMT     event.(CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-4951 advisory.

  - Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby     man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication     procedure) by reflection of the public key and the authentication evidence of the initiating device,     potentially permitting this attacker to complete authenticated pairing with the responding device using     the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit     at a time. (CVE-2020-26558)

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

  - Improper access control in BlueZ may allow an authenticated user to potentially enable information     disclosure via adjacent access. (CVE-2021-0129)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the bluez package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities :

  - In BlueZ 5.42, an out-of-bounds read was identified in     'packet_hexdump' function in 'monitor/packet.c' source     file. This issue can be triggered by processing a     corrupted dump file and will result in btmon     crash.(CVE-2016-9918)

  - In BlueZ 5.42, a buffer overflow was observed in     'read_n' function in 'tools/hcidump.c' source file.
    This issue can be triggered by processing a corrupted     dump file and will result in hcidump     crash.(CVE-2016-9917)

  - In BlueZ 5.42, a buffer overflow was observed in     'commands_dump' function in 'tools/parser/csr.c' source     file. The issue exists because 'commands' array is     overflowed by supplied parameter due to lack of     boundary checks on size of the buffer from frame     'frm->ptr' parameter. This issue can be triggered by     processing a corrupted dump file and will result in     hcidump crash.(CVE-2016-9804)

  - In BlueZ 5.42, a buffer over-read was identified in     'l2cap_packet' function in 'monitor/packet.c' source     file. This issue can be triggered by processing a     corrupted dump file and will result in btmon     crash.(CVE-2016-9802)

  - In BlueZ 5.42, a buffer overflow was observed in     'set_ext_ctrl' function in 'tools/parser/l2cap.c'     source file when processing corrupted dump     file.(CVE-2016-9801)

  - In BlueZ 5.42, a buffer overflow was observed in     'pin_code_reply_dump' function in 'tools/parser/hci.c'     source file. The issue exists because 'pin' array is     overflowed by supplied parameter due to lack of     boundary checks on size of the buffer from frame     'pin_code_reply_cp *cp' parameter.(CVE-2016-9800)

  - In BlueZ 5.42, a use-after-free was identified in     'conf_opt' function in 'tools/parser/l2cap.c' source     file. This issue can be triggered by processing a     corrupted dump file and will result in hcidump     crash.(CVE-2016-9798)

  - In BlueZ before 5.55, a double free was found in the     gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of     service or code execution, during service discovery,     due to a redundant disconnect MGMT     event.(CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 16.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4989-2 advisory.

  - Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby     man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication     procedure) by reflection of the public key and the authentication evidence of the initiating device,     potentially permitting this attacker to complete authenticated pairing with the responding device using     the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit     at a time. (CVE-2020-26558)

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Ubuntu 18.04 LTS / 20.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4989-1 advisory.

  - Bluetooth LE and BR/EDR secure pairing in Bluetooth Core Specification 2.1 through 5.2 may permit a nearby     man-in-the-middle attacker to identify the Passkey used during pairing (in the Passkey authentication     procedure) by reflection of the public key and the authentication evidence of the initiating device,     potentially permitting this attacker to complete authenticated pairing with the responding device using     the correct Passkey for the pairing session. The attack methodology determines the Passkey value one bit     at a time. (CVE-2020-26558)

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

  - The cli_feat_read_cb() function in src/gatt-database.c does not perform bounds checks on the 'offset'     variable before using it as an index into an array for reading. (CVE-2021-3588)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 8 host has packages installed that are affected by a vulnerability as referenced in the ELSA-2021-1598 advisory.

  - In BlueZ before 5.55, a double free was found in the gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of service or code execution, during service discovery,     due to a redundant disconnect MGMT event. (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote CentOS Linux 8 host has packages installed that are affected by a vulnerability as referenced in the CESA-2021:1598 advisory.

  - bluez: double free in gatttool client disconnect callback handler in src/shared/att.c could lead to DoS or     RCE (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 8 host has packages installed that are affected by a vulnerability as referenced in the RHSA-2021:1598 advisory.

  - bluez: double free in gatttool client disconnect callback handler in src/shared/att.c could lead to DoS or     RCE (CVE-2020-27153)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the version of the bluez package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerability :

  - In BlueZ before 5.55, a double free was found in the     gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of     service or code execution, during service discovery,     due to a redundant disconnect MGMT     event.(CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for bluez fixes the following issues :

CVE-2020-27153: Fixed possible crash on disconnect (bsc#1177895).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for bluez fixes the following issues :

CVE-2020-27153: Fixed crash on disconnect (bsc#1177895).

CVE-2020-0556: Fixed potential escalation of privilege and denial of service via adjacent access, caused by improper access control (bsc#1166751).

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for bluez fixes the following issues :

  - CVE-2020-27153: Fixed possible crash on disconnect     (bsc#1177895).

This update was imported from the SUSE:SLE-15:Update update project.

According to the version of the bluez package installed, the EulerOS installation on the remote host is affected by the following vulnerability :

  - In BlueZ before 5.55, a double free was found in the     gatttool disconnect_cb() routine from shared/att.c. A     remote attacker could potentially cause a denial of     service or code execution, during service discovery,     due to a redundant disconnect MGMT     event.(CVE-2020-27153)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote host is affected by the vulnerability described in GLSA-202011-01 (BlueZ: Arbitrary code execution)

    It was discovered that there was a double-free vulnerability in Bluez       after the service discovery which occurs after a Bluetoth Low Energy       (BLE) connection has been established to a device.
  Impact :

    A remote attacker, by enticing a user to connect to a malicious GATT       server or device, could cause the execution of arbitrary code with the       privileges of the user running gatttool client or cause a Denial of       Service condition.
  Workaround :

    There is no known workaround at this time.

An update of the bluez package has been released.

It was discovered that there was a double-free vulnerability in bluez, a suite of Bluetooth tools, utilities and daemons.

For Debian 9 'Stretch', this problem has been fixed in version 5.43-2+deb9u3.

We recommend that you upgrade your bluez packages.

For the detailed security status of bluez please refer to its security tracker page at: https://security-tracker.debian.org/tracker/bluez

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
184687	Rocky Linux 8 : bluez (RLSA-2021:1598)	Nessus	Rocky Linux Local Security Checks	high
160795	NewStart CGSL MAIN 6.02 : bluez Vulnerability (NS-SA-2022-0055)	Nessus	NewStart CGSL Local Security Checks	high
157977	EulerOS Virtualization 3.0.6.6 : bluez (EulerOS-SA-2022-1111)	Nessus	Huawei Local Security Checks	high
157522	AlmaLinux 8 : bluez (ALSA-2021:1598)	Nessus	Alma Linux Local Security Checks	high
156499	EulerOS Virtualization 3.0.2.6 : bluez (EulerOS-SA-2021-2910)	Nessus	Huawei Local Security Checks	high
154398	EulerOS 2.0 SP3 : bluez (EulerOS-SA-2021-2573)	Nessus	Huawei Local Security Checks	high
153318	EulerOS 2.0 SP2 : bluez (EulerOS-SA-2021-2357)	Nessus	Huawei Local Security Checks	high
153052	EulerOS 2.0 SP5 : bluez (EulerOS-SA-2021-2321)	Nessus	Huawei Local Security Checks	high
152271	Debian DSA-4951-1 : bluez - security update	Nessus	Debian Local Security Checks	high
151295	EulerOS Virtualization for ARM 64 3.0.2.0 : bluez (EulerOS-SA-2021-2088)	Nessus	Huawei Local Security Checks	high
150846	Ubuntu 16.04 ESM : BlueZ vulnerabilities (USN-4989-2)	Nessus	Ubuntu Local Security Checks	high
150809	Ubuntu 18.04 LTS / 20.04 LTS : BlueZ vulnerabilities (USN-4989-1)	Nessus	Ubuntu Local Security Checks	high
149922	Oracle Linux 8 : bluez (ELSA-2021-1598)	Nessus	Oracle Linux Local Security Checks	high
149757	CentOS 8 : bluez (CESA-2021:1598)	Nessus	CentOS Local Security Checks	high
149690	RHEL 8 : bluez (RHSA-2021:1598)	Nessus	Red Hat Local Security Checks	high
147037	EulerOS Virtualization for ARM 64 3.0.6.0 : bluez (EulerOS-SA-2021-1558)	Nessus	Huawei Local Security Checks	high
144178	EulerOS 2.0 SP8 : bluez (EulerOS-SA-2020-2507)	Nessus	Huawei Local Security Checks	high
143795	SUSE SLED15 / SLES15 Security Update : bluez (SUSE-SU-2020:3165-1)	Nessus	SuSE Local Security Checks	high
143656	SUSE SLED15 / SLES15 Security Update : bluez (SUSE-SU-2020:3034-1)	Nessus	SuSE Local Security Checks	high
142852	openSUSE Security Update : bluez (openSUSE-2020-1880)	Nessus	SuSE Local Security Checks	high
142836	openSUSE Security Update : bluez (openSUSE-2020-1876)	Nessus	SuSE Local Security Checks	high
142330	EulerOS 2.0 SP9 : bluez (EulerOS-SA-2020-2407)	Nessus	Huawei Local Security Checks	high
142325	GLSA-202011-01 : BlueZ: Arbitrary code execution	Nessus	Gentoo Local Security Checks	high
142302	EulerOS 2.0 SP9 : bluez (EulerOS-SA-2020-2425)	Nessus	Huawei Local Security Checks	high
142215	Photon OS 3.0: Bluez PHSA-2020-3.0-0158	Nessus	PhotonOS Local Security Checks	high
141792	Debian DLA-2410-1 : bluez security update	Nessus	Debian Local Security Checks	high

Detections

Analytics

CVE-2020-27153

high

Tenable Plugins

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high

high