In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix port tear down use-after-free Some drivers for multiport devices access port driver data from completion handlers of shared URBs submitted at attach() or first open() and stopped at disconnect() or last close(), respectively. A simple NULL check before accessing the driver data makes sure that a port state container has at least been allocated, but a completion handler can still race with port tear down. Reorder the disconnect handling so that ports are not deregistered (and their driver data freed) until after all ports have been hung up and the driver disconnect() callback has run so that all I/O has been stopped.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1793321383 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access     after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check     to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8     22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60     [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8     22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0     [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8     22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8     22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ?     aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8     22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ?     process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected     PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262:
    dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5     mb[0-3]=[0xffff 0xffff 0xffff 0xffff] (CVE-2022-49157)

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix DMA transfer     direction When CONFIG_DMA_API_DEBUG is selected, while running the crypto self test on the QAT crypto     algorithms, the function add_dma_entry() reports a warning similar to the one below, saying that     overlapping mappings are not supported. This occurs in tests where the input and the output scatter list     point to the same buffers (i.e. two different scatter lists which point to the same chunks of memory). The     logic that implements the mapping uses the flag DMA_BIDIRECTIONAL for both the input and the output     scatter lists which leads to overlapped write mappings. These are not supported by the DMA layer. Fix by     specifying the correct DMA transfer directions when mapping buffers. For in-place operations where the     input scatter list matches the output scatter list, buffers are mapped once with DMA_BIDIRECTIONAL,     otherwise input buffers are mapped using the flag DMA_TO_DEVICE and output buffers are mapped with     DMA_FROM_DEVICE. Overlapping a read mapping with a write mapping is a valid case in dma-coherent devices     like QAT. The function that frees and unmaps the buffers, qat_alg_free_bufl() has been changed accordingly     to the changes to the mapping function. DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping     mappings aren't supported WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270     ... Call Trace: dma_map_page_attrs+0x82/0x2d0 ? preempt_count_add+0x6a/0xa0     qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat] qat_alg_aead_dec+0x71/0x250 [intel_qat]     crypto_aead_decrypt+0x3d/0x70 test_aead_vec_cfg+0x649/0x810 ? number+0x310/0x3a0 ? vsnprintf+0x2a3/0x550 ?     scnprintf+0x42/0x70 ? valid_sg_divisions.constprop.0+0x86/0xa0 ? test_aead_vec+0xdf/0x120     test_aead_vec+0xdf/0x120 alg_test_aead+0x185/0x400 alg_test+0x3d8/0x500 ?     crypto_acomp_scomp_free_ctx+0x30/0x30 ? __schedule+0x32a/0x12a0 ? ttwu_queue_wakelist+0xbf/0x110 ?
    _raw_spin_unlock_irqrestore+0x23/0x40 ? try_to_wake_up+0x83/0x570 ? _raw_spin_unlock_irqrestore+0x23/0x40     ? __set_cpus_allowed_ptr_locked+0xea/0x1b0 ? crypto_acomp_scomp_free_ctx+0x30/0x30     cryptomgr_test+0x27/0x50 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30     (CVE-2022-50774)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK     in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware     (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid     the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all     chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to     the device. (CVE-2023-53715)

  - In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-     loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID     which was stored by the last successful allocation. This is done in a loop searching the ID space for a     free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But     that's racy vs. establishing the starting point. That is read out lockless, which leads to the following     problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add()     if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a     negative start value, i.e. -1, and the loop break never happens because the condition can never be true:
    if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the     ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry     unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock.
    (CVE-2023-53728)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

An update of the linux package has been released.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793370479 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix buffer overflow in     debugfs If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately,     this is debugfs so it's limited to root users. (CVE-2025-38317)

  - In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Clear all LMTT pages on     alloc Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup     LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale     data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all     new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add     asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle.
    (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) (CVE-2025-38511)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in     ath12k_service_ready_ext_event Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is     not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak:
    unreferenced object 0xffff8b3eb5789c00 (size 1024): comm softirq, pid 0, jiffies 4294942577 hex dump     (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00     01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410     ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k]     ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]     ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0     tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free     svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI     WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 (CVE-2025-39890)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak
    __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic     to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs     outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent     BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on     vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue     was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The     latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via     skb_dst_set() without dropping an existing one first. (CVE-2025-40183)

  - In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour     use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems     to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A     reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting     scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a     referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop     already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without     this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free     in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3     UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name:
    Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0     print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110     mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510     mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0
    __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0     mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150     call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210     netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0     do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90     netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90
    __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0     do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90
    __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90     mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960     mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0     mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0     mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60
    __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260     kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0     ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation:
    kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0     mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 (CVE-2025-68801)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793370479 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix buffer overflow in     debugfs If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately,     this is debugfs so it's limited to root users. (CVE-2025-38317)

  - In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Clear all LMTT pages on     alloc Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup     LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale     data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all     new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add     asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle.
    (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) (CVE-2025-38511)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix memory leak in     ath12k_service_ready_ext_event Currently, in ath12k_service_ready_ext_event(), svc_rdy_ext.mac_phy_caps is     not freed in the failure case, causing a memory leak. The following trace is observed in kmemleak:
    unreferenced object 0xffff8b3eb5789c00 (size 1024): comm softirq, pid 0, jiffies 4294942577 hex dump     (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 7b 00 00 10 ............{... 01 00 00 00 00 00 00 00     01 00 00 00 1f 38 00 00 .............8.. backtrace (crc 44e1c357): __kmalloc_noprof+0x30b/0x410     ath12k_wmi_mac_phy_caps_parse+0x84/0x100 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_wmi_svc_rdy_ext_parse+0x308/0x4c0 [ath12k] ath12k_wmi_tlv_iter+0x5e/0x140 [ath12k]     ath12k_service_ready_ext_event.isra.0+0x44/0xd0 [ath12k] ath12k_wmi_op_rx+0x2eb/0xd70 [ath12k]     ath12k_htc_rx_completion_handler+0x1f4/0x330 [ath12k] ath12k_ce_recv_process_cb+0x218/0x300 [ath12k]     ath12k_pci_ce_workqueue+0x1b/0x30 [ath12k] process_one_work+0x219/0x680 bh_worker+0x198/0x1f0     tasklet_action+0x13/0x30 handle_softirqs+0xca/0x460 __irq_exit_rcu+0xbe/0x110 irq_exit_rcu+0x9/0x30 Free     svc_rdy_ext.mac_phy_caps in the error case to fix this memory leak. Tested-on: QCN9274 hw2.0 PCI     WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 (CVE-2025-39890)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix metadata_dst leak
    __bpf_redirect_neigh_v{4,6} Cilium has a BPF egress gateway feature which forces outgoing K8s Pod traffic     to pass through dedicated egress gateways which then SNAT the traffic in order to interact with stable IPs     outside the cluster. The traffic is directed to the gateway via vxlan tunnel in collect md mode. A recent     BPF change utilized the bpf_redirect_neigh() helper to forward packets after the arrival and decap on     vxlan, which turned out over time that the kmalloc-256 slab usage in kernel was ever-increasing. The issue     was that vxlan allocates the metadata_dst object and attaches it through a fake dst entry to the skb. The     latter was never released though given bpf_redirect_neigh() was merely setting the new dst entry via     skb_dst_set() without dropping an existing one first. (CVE-2025-40183)

  - In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_router: Fix neighbour     use-after-free We sometimes observe use-after-free when dereferencing a neighbour [1]. The problem seems     to be that the driver stores a pointer to the neighbour, but without holding a reference on it. A     reference is only taken when the neighbour is used by a nexthop. Fix by simplifying the reference counting     scheme. Always take a reference when storing a neighbour pointer in a neighbour entry. Avoid taking a     referencing when the neighbour is used by a nexthop as the neighbour entry associated with the nexthop     already holds a reference. Tested by running the test that uncovered the problem over 300 times. Without     this patch the problem was reproduced after a handful of iterations. [1] BUG: KASAN: slab-use-after-free     in mlxsw_sp_neigh_entry_update+0x2d4/0x310 Read of size 8 at addr ffff88817f8e3420 by task ip/3929 CPU: 3     UID: 0 PID: 3929 Comm: ip Not tainted 6.18.0-rc4-virtme-g36b21a067510 #3 PREEMPT(full) Hardware name:
    Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 Call Trace: <TASK> dump_stack_lvl+0x6f/0xa0     print_address_description.constprop.0+0x6e/0x300 print_report+0xfc/0x1fb kasan_report+0xe4/0x110     mlxsw_sp_neigh_entry_update+0x2d4/0x310 mlxsw_sp_router_rif_gone_sync+0x35f/0x510     mlxsw_sp_rif_destroy+0x1ea/0x730 mlxsw_sp_inetaddr_port_vlan_event+0xa1/0x1b0
    __mlxsw_sp_inetaddr_lag_event+0xcc/0x130 __mlxsw_sp_inetaddr_event+0xf5/0x3c0     mlxsw_sp_router_netdevice_event+0x1015/0x1580 notifier_call_chain+0xcc/0x150     call_netdevice_notifiers_info+0x7e/0x100 __netdev_upper_dev_unlink+0x10b/0x210     netdev_upper_dev_unlink+0x79/0xa0 vrf_del_slave+0x18/0x50 do_set_master+0x146/0x7d0     do_setlink.isra.0+0x9a0/0x2880 rtnl_newlink+0x637/0xb20 rtnetlink_rcv_msg+0x6fe/0xb90     netlink_rcv_skb+0x123/0x380 netlink_unicast+0x4a3/0x770 netlink_sendmsg+0x75b/0xc90
    __sock_sendmsg+0xbe/0x160 ____sys_sendmsg+0x5b2/0x7d0 ___sys_sendmsg+0xfd/0x180 __sys_sendmsg+0x124/0x1c0     do_syscall_64+0xbb/0xfd0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [...] Allocated by task 109:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7b/0x90
    __kmalloc_noprof+0x2c1/0x790 neigh_alloc+0x6af/0x8f0 ___neigh_create+0x63/0xe90     mlxsw_sp_nexthop_neigh_init+0x430/0x7e0 mlxsw_sp_nexthop_type_init+0x212/0x960     mlxsw_sp_nexthop6_group_info_init.constprop.0+0x81f/0x1280 mlxsw_sp_nexthop6_group_get+0x392/0x6a0     mlxsw_sp_fib6_entry_create+0x46a/0xfd0 mlxsw_sp_router_fib6_replace+0x1ed/0x5f0     mlxsw_sp_router_fib6_event_work+0x10a/0x2a0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Freed by task 154:
    kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3b/0x60
    __kasan_slab_free+0x43/0x70 kmem_cache_free_bulk.part.0+0x1eb/0x5e0 kvfree_rcu_bulk+0x1f2/0x260     kfree_rcu_work+0x130/0x1b0 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40 kthread+0x355/0x5b0     ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 Last potentially related work creation:
    kasan_save_stack+0x30/0x50 kasan_record_aux_stack+0x8c/0xa0 kvfree_call_rcu+0x93/0x5b0     mlxsw_sp_router_neigh_event_work+0x67d/0x860 process_one_work+0xd57/0x1390 worker_thread+0x4d6/0xd40     kthread+0x355/0x5b0 ret_from_fork+0x1d4/0x270 ret_from_fork_asm+0x11/0x20 (CVE-2025-68801)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1793333110 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call
    __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk ->     serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a     reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab     free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock     scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The     existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}:
    _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8     dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc     qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54     handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40     generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0     el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8
    ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80     qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0     vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90     register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424     platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114     driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8
    __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0     device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8     of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac     geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}:
    __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454     console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc
    _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4     dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm]     msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c     drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key -->     free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock);
    lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace:
    dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24     print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c     lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated--- (CVE-2023-52516)

  - In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks     The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here     ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at     drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU:
    1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google     Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP:
    0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18     e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff     ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec     RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10:
    0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003     R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010     DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0     DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg     drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230     drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet     drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice     drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000     drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2     drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does     not check whether the endpoints it uses are actually present and have the appropriate types. This can be     fixed by adding a simple check of the endpoints. (CVE-2023-54213)

  - In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog     for mirred ingress The test Davide added in commit ca22da2fbd69 (act_mirred: use the backlog for nested     calls to mirred ingress) hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv ->     tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that     if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which     generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks     is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress ->     ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the     backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround     does not seem to address the issue. (CVE-2024-26740)

  - In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix a bug calling     wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa     node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's     because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before     calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF:
    supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops:
    0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name:
    QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 >     RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS:
    00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI:
    0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff     > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14:
    0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000)     knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3:
    000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000     > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: >     <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault >     ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault >     exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP:
    002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0     > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08:
    0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000     > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> (CVE-2024-26783)

  - In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode     lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable     inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try     getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by     function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode     lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru     traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode     lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting     context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is     added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 >     /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg     prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state     inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink =     0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode     ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(i_ea) ---- AA deadlock dispose_list // cannot be executed by prune_icache_sb     wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file     deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode     reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting     function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a     xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added     into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 >     /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia     prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state     inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm     file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia)     make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode |     ubifs_jnl_delete_inode(ib)  ubifs_jnl_write_inode ABBA deadlock -----make_reservation(BASEHD)     dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock     by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate(
    ---truncated--- (CVE-2024-45003)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4850 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4850-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     October 22, 2026                              https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.113-1~deb12u1     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-98433 CVE-2026-98435 CVE-2026-98440 CVE-2026-98441                      CVE-2026-98442 CVE-2026-98443 CVE-2026-98445 CVE-2026-98448                      CVE-2026-98450 CVE-2026-98451 CVE-2026-98452 CVE-2026-98453                      CVE-2026-98454 CVE-2026-98455 CVE-2026-98456 CVE-2026-98457                      CVE-2026-98458 CVE-2026-98459 CVE-2026-98460 CVE-2026-98461                      CVE-2026-98462 CVE-2026-98464 CVE-2026-98465 CVE-2026-98468                      CVE-2026-98473 CVE-2026-98475 CVE-2026-98476 CVE-2026-98477                      CVE-2026-98479 CVE-2026-98481 CVE-2026-98482 CVE-2026-98483                      CVE-2026-98484 CVE-2026-98485 CVE-2026-98486 CVE-2026-98487                      CVE-2026-98488 CVE-2026-98489 CVE-2026-98490 CVE-2026-98491                      CVE-2026-98493 CVE-2026-98494 CVE-2026-98495 CVE-2026-98498                      CVE-2026-98499 CVE-2026-98501 CVE-2026-98502 CVE-2026-98503                      CVE-2026-98504 CVE-2026-98505 CVE-2026-98506 CVE-2026-98507                      CVE-2026-98508 CVE-2026-98509 CVE-2026-98510 CVE-2026-98511                      CVE-2026-98512 CVE-2026-98513 CVE-2026-98514 CVE-2026-98515                      CVE-2026-98516 CVE-2026-98517 CVE-2026-98519 CVE-2026-98521                      CVE-2026-98522 CVE-2026-98523 CVE-2026-98524 CVE-2026-98525                      CVE-2026-98526 CVE-2026-98527 CVE-2026-98528 CVE-2026-98529                      CVE-2026-98531 CVE-2026-98532 CVE-2026-98533 CVE-2026-98534                      CVE-2026-98535 CVE-2026-98536 CVE-2026-98537 CVE-2026-98538                      CVE-2026-98539 CVE-2026-98541 CVE-2026-98544 CVE-2026-98545                      CVE-2026-98546 CVE-2026-98547 CVE-2026-98548 CVE-2026-98549                      CVE-2026-98550 CVE-2026-98553 CVE-2026-98554 CVE-2026-98555                      CVE-2026-98559 CVE-2026-98561 CVE-2026-98565 CVE-2026-98566                      CVE-2026-98567 CVE-2026-98568 CVE-2026-98569 CVE-2026-98572                      CVE-2026-98573 CVE-2026-98575 CVE-2026-98576 CVE-2026-98577                      CVE-2026-98578 CVE-2026-98579 CVE-2026-98580 CVE-2026-98581                      CVE-2026-98582 CVE-2026-98583 CVE-2026-98586 CVE-2026-98588                      CVE-2026-98590 CVE-2026-98591 CVE-2026-98593 CVE-2026-98594                      CVE-2026-98596 CVE-2026-98597 CVE-2026-98600 CVE-2026-98601                      CVE-2026-98602 CVE-2026-98605 CVE-2026-98606 CVE-2026-98607                      CVE-2026-98608 CVE-2026-98609 CVE-2026-98610 CVE-2026-98611                      CVE-2026-98612 CVE-2026-98613 CVE-2026-98614 CVE-2026-98615                      CVE-2026-98618 CVE-2026-98620 CVE-2026-98621 CVE-2026-98622                      CVE-2026-98623 CVE-2026-98624 CVE-2026-98625 CVE-2026-98626                      CVE-2026-98629 CVE-2026-98631 CVE-2026-98632 CVE-2026-98634                      CVE-2026-98636 CVE-2026-98640 CVE-2026-98641 CVE-2026-98642                      CVE-2026-98643 CVE-2026-98644 CVE-2026-98646 CVE-2026-98647                      CVE-2026-98655 CVE-2026-98656 CVE-2026-98657 CVE-2026-98658                      CVE-2026-98660 CVE-2026-98661 CVE-2026-98662 CVE-2026-98663                      CVE-2026-98664 CVE-2026-98665 CVE-2026-98666 CVE-2026-98668                      CVE-2026-98669 CVE-2026-98670 CVE-2026-98671 CVE-2026-98672                      CVE-2026-98673 CVE-2026-98677 CVE-2026-98679 CVE-2026-98680                      CVE-2026-98681 CVE-2026-98686 CVE-2026-98687 CVE-2026-98694                      CVE-2026-98695 CVE-2026-98696 CVE-2026-98697 CVE-2026-98698                      CVE-2026-98699 CVE-2026-98700 CVE-2026-98701 CVE-2026-98702                      CVE-2026-98703 CVE-2026-98704 CVE-2026-98705 CVE-2026-98706                      CVE-2026-98707 CVE-2026-98708 CVE-2026-98709 CVE-2026-98710                      CVE-2026-98711 CVE-2026-98713 CVE-2026-98716 CVE-2026-98717                      CVE-2026-98720 CVE-2026-98721 CVE-2026-98722 CVE-2026-98725                      CVE-2026-98726 CVE-2026-98727 CVE-2026-98728 CVE-2026-98730                      CVE-2026-98731 CVE-2026-98732 CVE-2026-98733 CVE-2026-98734                      CVE-2026-98735 CVE-2026-98736 CVE-2026-98737 CVE-2026-98738                      CVE-2026-98739 CVE-2026-98741 CVE-2026-98742 CVE-2026-98743                      CVE-2026-98744 CVE-2026-98745 CVE-2026-98746 CVE-2026-98748                      CVE-2026-98749 CVE-2026-98750 CVE-2026-98751 CVE-2026-98752                      CVE-2026-98753 CVE-2026-98754 CVE-2026-98755 CVE-2026-98756                      CVE-2026-98757 CVE-2026-98758 CVE-2026-98760 CVE-2026-98761                      CVE-2026-98762 CVE-2026-98763 CVE-2026-98764 CVE-2026-98765                      CVE-2026-98766 CVE-2026-98767 CVE-2026-98768 CVE-2026-98769                      CVE-2026-98770 CVE-2026-98771 CVE-2026-98772 CVE-2026-98773                      CVE-2026-98775 CVE-2026-98777 CVE-2026-98778 CVE-2026-98779                      CVE-2026-98780 CVE-2026-98781 CVE-2026-98782 CVE-2026-98783                      CVE-2026-98784 CVE-2026-98785 CVE-2026-98790 CVE-2026-98791                      CVE-2026-98792 CVE-2026-98793 CVE-2026-98794 CVE-2026-98796                      CVE-2026-98797 CVE-2026-98798 CVE-2026-98801 CVE-2026-98805                      CVE-2026-98807 CVE-2026-98808 CVE-2026-98809 CVE-2026-98811                      CVE-2026-98812 CVE-2026-98819 CVE-2026-98822 CVE-2026-98823                      CVE-2026-98825 CVE-2026-98826 CVE-2026-98827 CVE-2026-98828                      CVE-2026-98830 CVE-2026-98831 CVE-2026-98833 CVE-2026-98835                      CVE-2026-98836 CVE-2026-98837 CVE-2026-98838 CVE-2026-98840                      CVE-2026-98841 CVE-2026-98844 CVE-2026-98845 CVE-2026-98846                      CVE-2026-98847 CVE-2026-98848 CVE-2026-98849 CVE-2026-98850                      CVE-2026-98851 CVE-2026-98852 CVE-2026-98854 CVE-2026-98855                      CVE-2026-98856 CVE-2026-98857 CVE-2026-98858 CVE-2026-98859                      CVE-2026-98860 CVE-2026-98862 CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.113-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.112 and 6.12.113.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - USB: serial: fix port tear down use-after-free Some drivers for multiport devices access port driver data     from completion handlers of shared URBs submitted at attach() or first open() and stopped at disconnect()     or last close(), respectively. A simple NULL check before accessing the driver data makes sure that a port     state container has at least been allocated, but a completion handler can still race with port tear down.
    Reorder the disconnect handling so that ports are not deregistered (and their driver data freed) until     after all ports have been hung up and the driver disconnect() callback has run so that all I/O has been     stopped. (CVE-2026-98772)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
376285	SUSE SLED15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2026:5091-1)	Nessus	SuSE Local Security Checks	Local	critical
375672	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1793321383)	Nessus	CentOS Local Security Checks	Local	high
375086	Photon OS 5.0: Linux PHSA-2026-5.0-92-1044	Nessus	PhotonOS Local Security Checks	Local	critical
374300	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793370479)	Nessus	Rocky Linux Local Security Checks	Local	high
374299	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793370479)	Nessus	Alma Linux Local Security Checks	Local	high
374135	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1793333110)	Nessus	Alma Linux Local Security Checks	Local	high
373466	Amazon Linux 2023 : bpftool6.12, kernel6.12, kernel6.12-devel (ALAS2023-2026-3335)	Nessus	Amazon Linux Local Security Checks	Local	medium
371850	Amazon Linux 2023 : bpftool6.18, kernel6.18, kernel6.18-devel (ALAS2023-2026-3251)	Nessus	Amazon Linux Local Security Checks	Local	critical
370518	Debian dla-4850 : ata-modules-6.12.107+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
366990	Linux Distros Unpatched Vulnerability : CVE-2026-98772	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-98772

medium

Tenable Plugins

critical

high

critical

high

high

high

medium

critical

high

high