In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250 hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0 disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793866396 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors     tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN:
    global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr     ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0     ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200     trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0     This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata     definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g.
    the next automaton's data in this case). The error is harmless as, while printing the string, we stop at     the null terminator, but it should still be fixed. Use the __string facilities while defining the     tracepoints to avoid reading out of bound memory. (CVE-2025-38636)

  - In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When     allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to     ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using     get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length     earlier either. Consolidate the two copies of this code under a single helper. This bug would allow     userspace to create a mapping that overlaps with some other mapping or a reserved range. (CVE-2025-38688)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL dereference in     ath11k_qmi_m3_load() If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is     not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len.
    Found by Linux Verification Center (linuxtesting.org) with SVACE. (CVE-2025-39991)

  - In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-     bounds writes in handle_auth_session_key() The len field originates from untrusted network packets.
    Boundary checks have been added to prevent potential out-of-bounds writes when decrypting the connection     secret or processing service tickets. [ idryomov: changelog ] (CVE-2025-68284)

  - In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on     duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on     every inbound group ACK, even when the same member has already acknowledged the current broadcast round.
    Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to     65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the     affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs     before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents     the underflow path. (CVE-2026-31662)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793866396 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: rv: Use strings in da monitors     tracepoints Using DA monitors tracepoints with KASAN enabled triggers the following warning: BUG: KASAN:
    global-out-of-bounds in do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0 Read of size 32 at addr     ffffffffaada8980 by task ... Call Trace: <TASK> [...] do_trace_event_raw_event_event_da_monitor+0xd6/0x1a0     ? __pfx_do_trace_event_raw_event_event_da_monitor+0x10/0x10 ? trace_event_sncid+0x83/0x200     trace_event_sncid+0x163/0x200 [...] The buggy address belongs to the variable: automaton_snep+0x4e0/0x5e0     This is caused by the tracepoints reading 32 bytes __array instead of __string from the automata     definition. Such strings are literals and reading 32 bytes ends up in out of bound memory accesses (e.g.
    the next automaton's data in this case). The error is harmless as, while printing the string, we stop at     the null terminator, but it should still be fixed. Use the __string facilities while defining the     tracepoints to avoid reading out of bound memory. (CVE-2025-38636)

  - In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When     allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to     ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using     get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length     earlier either. Consolidate the two copies of this code under a single helper. This bug would allow     userspace to create a mapping that overlaps with some other mapping or a reserved range. (CVE-2025-38688)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL dereference in     ath11k_qmi_m3_load() If ab->fw.m3_data points to data, then fw pointer remains null. Further, if m3_mem is     not allocated, then fw is dereferenced to be passed to ath11k_err function. Replace fw->size by m3_len.
    Found by Linux Verification Center (linuxtesting.org) with SVACE. (CVE-2025-39991)

  - In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-     bounds writes in handle_auth_session_key() The len field originates from untrusted network packets.
    Boundary checks have been added to prevent potential out-of-bounds writes when decrypting the connection     secret or processing service tickets. [ idryomov: changelog ] (CVE-2025-68284)

  - In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on     duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on     every inbound group ACK, even when the same member has already acknowledged the current broadcast round.
    Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to     65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the     affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs     before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents     the underflow path. (CVE-2026-31662)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1793321383 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access     after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check     to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8     22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60     [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8     22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0     [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8     22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8     22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ?     aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8     22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ?     process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected     PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262:
    dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5     mb[0-3]=[0xffff 0xffff 0xffff 0xffff] (CVE-2022-49157)

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix DMA transfer     direction When CONFIG_DMA_API_DEBUG is selected, while running the crypto self test on the QAT crypto     algorithms, the function add_dma_entry() reports a warning similar to the one below, saying that     overlapping mappings are not supported. This occurs in tests where the input and the output scatter list     point to the same buffers (i.e. two different scatter lists which point to the same chunks of memory). The     logic that implements the mapping uses the flag DMA_BIDIRECTIONAL for both the input and the output     scatter lists which leads to overlapped write mappings. These are not supported by the DMA layer. Fix by     specifying the correct DMA transfer directions when mapping buffers. For in-place operations where the     input scatter list matches the output scatter list, buffers are mapped once with DMA_BIDIRECTIONAL,     otherwise input buffers are mapped using the flag DMA_TO_DEVICE and output buffers are mapped with     DMA_FROM_DEVICE. Overlapping a read mapping with a write mapping is a valid case in dma-coherent devices     like QAT. The function that frees and unmaps the buffers, qat_alg_free_bufl() has been changed accordingly     to the changes to the mapping function. DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping     mappings aren't supported WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270     ... Call Trace: dma_map_page_attrs+0x82/0x2d0 ? preempt_count_add+0x6a/0xa0     qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat] qat_alg_aead_dec+0x71/0x250 [intel_qat]     crypto_aead_decrypt+0x3d/0x70 test_aead_vec_cfg+0x649/0x810 ? number+0x310/0x3a0 ? vsnprintf+0x2a3/0x550 ?     scnprintf+0x42/0x70 ? valid_sg_divisions.constprop.0+0x86/0xa0 ? test_aead_vec+0xdf/0x120     test_aead_vec+0xdf/0x120 alg_test_aead+0x185/0x400 alg_test+0x3d8/0x500 ?     crypto_acomp_scomp_free_ctx+0x30/0x30 ? __schedule+0x32a/0x12a0 ? ttwu_queue_wakelist+0xbf/0x110 ?
    _raw_spin_unlock_irqrestore+0x23/0x40 ? try_to_wake_up+0x83/0x570 ? _raw_spin_unlock_irqrestore+0x23/0x40     ? __set_cpus_allowed_ptr_locked+0xea/0x1b0 ? crypto_acomp_scomp_free_ctx+0x30/0x30     cryptomgr_test+0x27/0x50 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30     (CVE-2022-50774)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK     in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware     (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid     the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all     chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to     the device. (CVE-2023-53715)

  - In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-     loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID     which was stored by the last successful allocation. This is done in a loop searching the ID space for a     free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But     that's racy vs. establishing the starting point. That is read out lockless, which leads to the following     problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add()     if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a     negative start value, i.e. -1, and the loop break never happens because the condition can never be true:
    if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the     ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry     unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock.
    (CVE-2023-53728)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

An update of the linux package has been released.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4850 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4850-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     October 22, 2026                              https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.113-1~deb12u1     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-98433 CVE-2026-98435 CVE-2026-98440 CVE-2026-98441                      CVE-2026-98442 CVE-2026-98443 CVE-2026-98445 CVE-2026-98448                      CVE-2026-98450 CVE-2026-98451 CVE-2026-98452 CVE-2026-98453                      CVE-2026-98454 CVE-2026-98455 CVE-2026-98456 CVE-2026-98457                      CVE-2026-98458 CVE-2026-98459 CVE-2026-98460 CVE-2026-98461                      CVE-2026-98462 CVE-2026-98464 CVE-2026-98465 CVE-2026-98468                      CVE-2026-98473 CVE-2026-98475 CVE-2026-98476 CVE-2026-98477                      CVE-2026-98479 CVE-2026-98481 CVE-2026-98482 CVE-2026-98483                      CVE-2026-98484 CVE-2026-98485 CVE-2026-98486 CVE-2026-98487                      CVE-2026-98488 CVE-2026-98489 CVE-2026-98490 CVE-2026-98491                      CVE-2026-98493 CVE-2026-98494 CVE-2026-98495 CVE-2026-98498                      CVE-2026-98499 CVE-2026-98501 CVE-2026-98502 CVE-2026-98503                      CVE-2026-98504 CVE-2026-98505 CVE-2026-98506 CVE-2026-98507                      CVE-2026-98508 CVE-2026-98509 CVE-2026-98510 CVE-2026-98511                      CVE-2026-98512 CVE-2026-98513 CVE-2026-98514 CVE-2026-98515                      CVE-2026-98516 CVE-2026-98517 CVE-2026-98519 CVE-2026-98521                      CVE-2026-98522 CVE-2026-98523 CVE-2026-98524 CVE-2026-98525                      CVE-2026-98526 CVE-2026-98527 CVE-2026-98528 CVE-2026-98529                      CVE-2026-98531 CVE-2026-98532 CVE-2026-98533 CVE-2026-98534                      CVE-2026-98535 CVE-2026-98536 CVE-2026-98537 CVE-2026-98538                      CVE-2026-98539 CVE-2026-98541 CVE-2026-98544 CVE-2026-98545                      CVE-2026-98546 CVE-2026-98547 CVE-2026-98548 CVE-2026-98549                      CVE-2026-98550 CVE-2026-98553 CVE-2026-98554 CVE-2026-98555                      CVE-2026-98559 CVE-2026-98561 CVE-2026-98565 CVE-2026-98566                      CVE-2026-98567 CVE-2026-98568 CVE-2026-98569 CVE-2026-98572                      CVE-2026-98573 CVE-2026-98575 CVE-2026-98576 CVE-2026-98577                      CVE-2026-98578 CVE-2026-98579 CVE-2026-98580 CVE-2026-98581                      CVE-2026-98582 CVE-2026-98583 CVE-2026-98586 CVE-2026-98588                      CVE-2026-98590 CVE-2026-98591 CVE-2026-98593 CVE-2026-98594                      CVE-2026-98596 CVE-2026-98597 CVE-2026-98600 CVE-2026-98601                      CVE-2026-98602 CVE-2026-98605 CVE-2026-98606 CVE-2026-98607                      CVE-2026-98608 CVE-2026-98609 CVE-2026-98610 CVE-2026-98611                      CVE-2026-98612 CVE-2026-98613 CVE-2026-98614 CVE-2026-98615                      CVE-2026-98618 CVE-2026-98620 CVE-2026-98621 CVE-2026-98622                      CVE-2026-98623 CVE-2026-98624 CVE-2026-98625 CVE-2026-98626                      CVE-2026-98629 CVE-2026-98631 CVE-2026-98632 CVE-2026-98634                      CVE-2026-98636 CVE-2026-98640 CVE-2026-98641 CVE-2026-98642                      CVE-2026-98643 CVE-2026-98644 CVE-2026-98646 CVE-2026-98647                      CVE-2026-98655 CVE-2026-98656 CVE-2026-98657 CVE-2026-98658                      CVE-2026-98660 CVE-2026-98661 CVE-2026-98662 CVE-2026-98663                      CVE-2026-98664 CVE-2026-98665 CVE-2026-98666 CVE-2026-98668                      CVE-2026-98669 CVE-2026-98670 CVE-2026-98671 CVE-2026-98672                      CVE-2026-98673 CVE-2026-98677 CVE-2026-98679 CVE-2026-98680                      CVE-2026-98681 CVE-2026-98686 CVE-2026-98687 CVE-2026-98694                      CVE-2026-98695 CVE-2026-98696 CVE-2026-98697 CVE-2026-98698                      CVE-2026-98699 CVE-2026-98700 CVE-2026-98701 CVE-2026-98702                      CVE-2026-98703 CVE-2026-98704 CVE-2026-98705 CVE-2026-98706                      CVE-2026-98707 CVE-2026-98708 CVE-2026-98709 CVE-2026-98710                      CVE-2026-98711 CVE-2026-98713 CVE-2026-98716 CVE-2026-98717                      CVE-2026-98720 CVE-2026-98721 CVE-2026-98722 CVE-2026-98725                      CVE-2026-98726 CVE-2026-98727 CVE-2026-98728 CVE-2026-98730                      CVE-2026-98731 CVE-2026-98732 CVE-2026-98733 CVE-2026-98734                      CVE-2026-98735 CVE-2026-98736 CVE-2026-98737 CVE-2026-98738                      CVE-2026-98739 CVE-2026-98741 CVE-2026-98742 CVE-2026-98743                      CVE-2026-98744 CVE-2026-98745 CVE-2026-98746 CVE-2026-98748                      CVE-2026-98749 CVE-2026-98750 CVE-2026-98751 CVE-2026-98752                      CVE-2026-98753 CVE-2026-98754 CVE-2026-98755 CVE-2026-98756                      CVE-2026-98757 CVE-2026-98758 CVE-2026-98760 CVE-2026-98761                      CVE-2026-98762 CVE-2026-98763 CVE-2026-98764 CVE-2026-98765                      CVE-2026-98766 CVE-2026-98767 CVE-2026-98768 CVE-2026-98769                      CVE-2026-98770 CVE-2026-98771 CVE-2026-98772 CVE-2026-98773                      CVE-2026-98775 CVE-2026-98777 CVE-2026-98778 CVE-2026-98779                      CVE-2026-98780 CVE-2026-98781 CVE-2026-98782 CVE-2026-98783                      CVE-2026-98784 CVE-2026-98785 CVE-2026-98790 CVE-2026-98791                      CVE-2026-98792 CVE-2026-98793 CVE-2026-98794 CVE-2026-98796                      CVE-2026-98797 CVE-2026-98798 CVE-2026-98801 CVE-2026-98805                      CVE-2026-98807 CVE-2026-98808 CVE-2026-98809 CVE-2026-98811                      CVE-2026-98812 CVE-2026-98819 CVE-2026-98822 CVE-2026-98823                      CVE-2026-98825 CVE-2026-98826 CVE-2026-98827 CVE-2026-98828                      CVE-2026-98830 CVE-2026-98831 CVE-2026-98833 CVE-2026-98835                      CVE-2026-98836 CVE-2026-98837 CVE-2026-98838 CVE-2026-98840                      CVE-2026-98841 CVE-2026-98844 CVE-2026-98845 CVE-2026-98846                      CVE-2026-98847 CVE-2026-98848 CVE-2026-98849 CVE-2026-98850                      CVE-2026-98851 CVE-2026-98852 CVE-2026-98854 CVE-2026-98855                      CVE-2026-98856 CVE-2026-98857 CVE-2026-98858 CVE-2026-98859                      CVE-2026-98860 CVE-2026-98862 CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.113-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.112 and 6.12.113.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel     under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE     schedulers then use its packet queue and update its transmit counters without any protection against     channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the     separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink     the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-     after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in     hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0     hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30     l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170     l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci_conn_failed+0x150/0x250     hci_abort_conn_sync+0x3e3/0x800 hci_cmd_sync_run+0x7e/0xc0 hci_abort_conn+0x105/0x1f0     disconnect_sync+0x157/0x290 hci_cmd_sync_work+0x13c/0x290 Hold the existing device mutex across channel     selection and transmission in both schedulers to serialize them with channel teardown. Keep timeout     handling outside the critical sections because hci_link_tx_to() acquires the same mutex. This also permits     the transmit path to sleep, unlike extending the RCU read-side critical section across packet submission.
    (CVE-2026-98735)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
376433	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793866396)	Nessus	Alma Linux Local Security Checks	Local	high
376432	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793866396)	Nessus	Rocky Linux Local Security Checks	Local	high
376285	SUSE SLED15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2026:5091-1)	Nessus	SuSE Local Security Checks	Local	critical
375672	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1793321383)	Nessus	CentOS Local Security Checks	Local	high
375086	Photon OS 5.0: Linux PHSA-2026-5.0-92-1044	Nessus	PhotonOS Local Security Checks	Local	critical
370518	Debian dla-4850 : ata-modules-6.12.107+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
366995	Linux Distros Unpatched Vulnerability : CVE-2026-98735	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-98735

medium

Tenable Plugins

high

high

critical

high

critical

high

high