In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where actual_length is the unsigned length the device reported for the matching IN packet. A packet completed with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length by the buffer size while keeping each packet length aligned to a whole output frame. BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018 Call Trace: dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) __asan_memset (mm/kasan/shadow.c:84) usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated by task 10: __kmalloc_cache_noprof (mm/slub.c:5563) usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595) usb6fire_chip_probe (sound/usb/6fire/chip.c:133) usb_probe_interface (drivers/usb/core/driver.c:399) The buggy address belongs to the object at ffff88802a3d0000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 0 bytes inside of 4832-byte region [ffff88802a3d0000, ffff88802a3d12e0) Kernel panic - not syncing: Fatal exception in interrupt

The CentOS Linux 8.4 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.4:CLSA-2026:1792979607 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up     for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free     detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct     ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one     HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set     muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in     ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k,     and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean     up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [     306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0     peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt     peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0     peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer     b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from     b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac     vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci     0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0:
    htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap     vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from     d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0:
    failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta     peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed     [21713.799968] ================================================================== [21713.799991] BUG:
    KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997]     Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a     [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059]
    __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]     [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110]     ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]     [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be     [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176]     netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187]     sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1     [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210]     entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69:
    0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated     by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]     [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265]     ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277]     ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283]     ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- (CVE-2022-50880)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Handle EBUSY correctly     As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases     it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also     need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-     free. (CVE-2023-54046)

  - In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in     qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 (net: be more gentle about silly gso requests     coming from user) virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space     to cook a bad GSO packet. Then commit cf9acc90c80ec (net: virtio_net_hdr_to_skb: count transport header     in UFO) while fixing one issue, allowed user space to cook a GSO packet with the following characteristic     : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up     with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 :
    gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set     qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This     leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an     estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular     issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel     NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel     mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD     107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm:
    b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX,     1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue     (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [     70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00     eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49     All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp)     b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov     %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx     22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx     <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34     mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the     faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11     mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00     00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561]     RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI:
    0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09:
    ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [     70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS:
    000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES:
    0000 C ---truncated--- (CVE-2024-49949)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.5 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.5:CLSA-2026:1792979985 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst     refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong     because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers     the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and     checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following     refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134     [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm:
    ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX,     1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8     85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc     01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP:
    0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000     RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08:
    0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000     R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000)     GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge]
    __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa     [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ?     br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ?     vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
    __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2
    __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa     gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140     napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9     net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ?     smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6     ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1     dst_release underflow (CVE-2021-47222)

  - In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null     pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the     tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a     grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking.
    Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make     sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we     don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked     in the egress path. (CVE-2021-47223)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Guard stack limits against 32bit     overflow This patch promotes the arithmetic around checking stack bounds to be done in the 64-bit domain,     instead of the current 32bit. The arithmetic implies adding together a 64-bit register with a int offset.
    The register was checked to be below 1<<29 when it was variable, but not when it was fixed. The offset     either comes from an instruction (in which case it is 16 bit), from another register (in which case the     caller checked it to be below 1<<29 [1]), or from the size of an argument to a kfunc (in which case it can     be a u32 [2]). Between the register being inconsistently checked to be below 1<<29, and the offset being     up to an u32, it appears that we were open to overflowing the `int`s which were currently used for     arithmetic. [1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf     /verifier.c#L7494-L7498 [2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e     9/kernel/bpf/verifier.c#L11904 (CVE-2023-52676)

  - In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in     reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because     it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it     complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4850 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4850-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     October 22, 2026                              https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.113-1~deb12u1     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-98433 CVE-2026-98435 CVE-2026-98440 CVE-2026-98441                      CVE-2026-98442 CVE-2026-98443 CVE-2026-98445 CVE-2026-98448                      CVE-2026-98450 CVE-2026-98451 CVE-2026-98452 CVE-2026-98453                      CVE-2026-98454 CVE-2026-98455 CVE-2026-98456 CVE-2026-98457                      CVE-2026-98458 CVE-2026-98459 CVE-2026-98460 CVE-2026-98461                      CVE-2026-98462 CVE-2026-98464 CVE-2026-98465 CVE-2026-98468                      CVE-2026-98473 CVE-2026-98475 CVE-2026-98476 CVE-2026-98477                      CVE-2026-98479 CVE-2026-98481 CVE-2026-98482 CVE-2026-98483                      CVE-2026-98484 CVE-2026-98485 CVE-2026-98486 CVE-2026-98487                      CVE-2026-98488 CVE-2026-98489 CVE-2026-98490 CVE-2026-98491                      CVE-2026-98493 CVE-2026-98494 CVE-2026-98495 CVE-2026-98498                      CVE-2026-98499 CVE-2026-98501 CVE-2026-98502 CVE-2026-98503                      CVE-2026-98504 CVE-2026-98505 CVE-2026-98506 CVE-2026-98507                      CVE-2026-98508 CVE-2026-98509 CVE-2026-98510 CVE-2026-98511                      CVE-2026-98512 CVE-2026-98513 CVE-2026-98514 CVE-2026-98515                      CVE-2026-98516 CVE-2026-98517 CVE-2026-98519 CVE-2026-98521                      CVE-2026-98522 CVE-2026-98523 CVE-2026-98524 CVE-2026-98525                      CVE-2026-98526 CVE-2026-98527 CVE-2026-98528 CVE-2026-98529                      CVE-2026-98531 CVE-2026-98532 CVE-2026-98533 CVE-2026-98534                      CVE-2026-98535 CVE-2026-98536 CVE-2026-98537 CVE-2026-98538                      CVE-2026-98539 CVE-2026-98541 CVE-2026-98544 CVE-2026-98545                      CVE-2026-98546 CVE-2026-98547 CVE-2026-98548 CVE-2026-98549                      CVE-2026-98550 CVE-2026-98553 CVE-2026-98554 CVE-2026-98555                      CVE-2026-98559 CVE-2026-98561 CVE-2026-98565 CVE-2026-98566                      CVE-2026-98567 CVE-2026-98568 CVE-2026-98569 CVE-2026-98572                      CVE-2026-98573 CVE-2026-98575 CVE-2026-98576 CVE-2026-98577                      CVE-2026-98578 CVE-2026-98579 CVE-2026-98580 CVE-2026-98581                      CVE-2026-98582 CVE-2026-98583 CVE-2026-98586 CVE-2026-98588                      CVE-2026-98590 CVE-2026-98591 CVE-2026-98593 CVE-2026-98594                      CVE-2026-98596 CVE-2026-98597 CVE-2026-98600 CVE-2026-98601                      CVE-2026-98602 CVE-2026-98605 CVE-2026-98606 CVE-2026-98607                      CVE-2026-98608 CVE-2026-98609 CVE-2026-98610 CVE-2026-98611                      CVE-2026-98612 CVE-2026-98613 CVE-2026-98614 CVE-2026-98615                      CVE-2026-98618 CVE-2026-98620 CVE-2026-98621 CVE-2026-98622                      CVE-2026-98623 CVE-2026-98624 CVE-2026-98625 CVE-2026-98626                      CVE-2026-98629 CVE-2026-98631 CVE-2026-98632 CVE-2026-98634                      CVE-2026-98636 CVE-2026-98640 CVE-2026-98641 CVE-2026-98642                      CVE-2026-98643 CVE-2026-98644 CVE-2026-98646 CVE-2026-98647                      CVE-2026-98655 CVE-2026-98656 CVE-2026-98657 CVE-2026-98658                      CVE-2026-98660 CVE-2026-98661 CVE-2026-98662 CVE-2026-98663                      CVE-2026-98664 CVE-2026-98665 CVE-2026-98666 CVE-2026-98668                      CVE-2026-98669 CVE-2026-98670 CVE-2026-98671 CVE-2026-98672                      CVE-2026-98673 CVE-2026-98677 CVE-2026-98679 CVE-2026-98680                      CVE-2026-98681 CVE-2026-98686 CVE-2026-98687 CVE-2026-98694                      CVE-2026-98695 CVE-2026-98696 CVE-2026-98697 CVE-2026-98698                      CVE-2026-98699 CVE-2026-98700 CVE-2026-98701 CVE-2026-98702                      CVE-2026-98703 CVE-2026-98704 CVE-2026-98705 CVE-2026-98706                      CVE-2026-98707 CVE-2026-98708 CVE-2026-98709 CVE-2026-98710                      CVE-2026-98711 CVE-2026-98713 CVE-2026-98716 CVE-2026-98717                      CVE-2026-98720 CVE-2026-98721 CVE-2026-98722 CVE-2026-98725                      CVE-2026-98726 CVE-2026-98727 CVE-2026-98728 CVE-2026-98730                      CVE-2026-98731 CVE-2026-98732 CVE-2026-98733 CVE-2026-98734                      CVE-2026-98735 CVE-2026-98736 CVE-2026-98737 CVE-2026-98738                      CVE-2026-98739 CVE-2026-98741 CVE-2026-98742 CVE-2026-98743                      CVE-2026-98744 CVE-2026-98745 CVE-2026-98746 CVE-2026-98748                      CVE-2026-98749 CVE-2026-98750 CVE-2026-98751 CVE-2026-98752                      CVE-2026-98753 CVE-2026-98754 CVE-2026-98755 CVE-2026-98756                      CVE-2026-98757 CVE-2026-98758 CVE-2026-98760 CVE-2026-98761                      CVE-2026-98762 CVE-2026-98763 CVE-2026-98764 CVE-2026-98765                      CVE-2026-98766 CVE-2026-98767 CVE-2026-98768 CVE-2026-98769                      CVE-2026-98770 CVE-2026-98771 CVE-2026-98772 CVE-2026-98773                      CVE-2026-98775 CVE-2026-98777 CVE-2026-98778 CVE-2026-98779                      CVE-2026-98780 CVE-2026-98781 CVE-2026-98782 CVE-2026-98783                      CVE-2026-98784 CVE-2026-98785 CVE-2026-98790 CVE-2026-98791                      CVE-2026-98792 CVE-2026-98793 CVE-2026-98794 CVE-2026-98796                      CVE-2026-98797 CVE-2026-98798 CVE-2026-98801 CVE-2026-98805                      CVE-2026-98807 CVE-2026-98808 CVE-2026-98809 CVE-2026-98811                      CVE-2026-98812 CVE-2026-98819 CVE-2026-98822 CVE-2026-98823                      CVE-2026-98825 CVE-2026-98826 CVE-2026-98827 CVE-2026-98828                      CVE-2026-98830 CVE-2026-98831 CVE-2026-98833 CVE-2026-98835                      CVE-2026-98836 CVE-2026-98837 CVE-2026-98838 CVE-2026-98840                      CVE-2026-98841 CVE-2026-98844 CVE-2026-98845 CVE-2026-98846                      CVE-2026-98847 CVE-2026-98848 CVE-2026-98849 CVE-2026-98850                      CVE-2026-98851 CVE-2026-98852 CVE-2026-98854 CVE-2026-98855                      CVE-2026-98856 CVE-2026-98857 CVE-2026-98858 CVE-2026-98859                      CVE-2026-98860 CVE-2026-98862 CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.113-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.112 and 6.12.113.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792445930 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted     memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause     set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers     need to take care to handle these errors to avoid returning decrypted (shared) memory to the page     allocator, which could lead to functional or security issues. Leak the decrypted memory when     set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call     WARN_ONCE(). (CVE-2024-57793)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - zero initialize     memory allocated via sock_kmalloc Several crypto user API contexts and requests allocated with     sock_kmalloc() were left uninitialized, relying on callers to set fields explicitly. This resulted in the     use of uninitialized data in certain error paths or when new fields are added in the future. The ACVP     patches also contain two user-space interface files: algif_kpp.c and algif_akcipher.c. These too rely on     proper initialization of their context structures. A particular issue has been observed with the newly     added 'inflight' variable introduced in af_alg_ctx by commit: 67b164a871af (crypto: af_alg - Disallow     multiple in-flight AIO requests) Because the context is not memset to zero after allocation, the inflight     variable has contained garbage values. As a result, af_alg_alloc_areq() has incorrectly returned -EBUSY     randomly when the garbage value was interpreted as true:
    https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209 The check directly tests ctx->inflight     without explicitly comparing against true/false. Since inflight is only ever set to true or false later,     an uninitialized value has triggered -EBUSY failures. Zero-initializing memory allocated with     sock_kmalloc() ensures inflight and other fields start in a known state, removing random issues caused by     uninitialized data. (CVE-2025-71113)

  - In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for     %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte     stack buffers with %pISpc. That is too small for the longest current-tree IPv6-with-port form the     formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for     v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as     [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50     visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50]     buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch     the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum     current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier     mapped-v4 example (CVE-2026-31630)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for     partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are     adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous     set checks on start elements for this reason. However, it is possible to add intervals that overlap to     this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A     C Restore the check on overlapping start elements to report an overlap. (CVE-2026-45873)

  - In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-     chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;)     and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the     terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of     iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond     the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops     to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and     atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since     most are connector- based) 256 is a generous upper bound. (cherry picked from commit     95700a3d660287ed657d6892f7be9ffc0e294a93) (CVE-2026-53138)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792445930 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted     memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause     set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers     need to take care to handle these errors to avoid returning decrypted (shared) memory to the page     allocator, which could lead to functional or security issues. Leak the decrypted memory when     set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call     WARN_ONCE(). (CVE-2024-57793)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - zero initialize     memory allocated via sock_kmalloc Several crypto user API contexts and requests allocated with     sock_kmalloc() were left uninitialized, relying on callers to set fields explicitly. This resulted in the     use of uninitialized data in certain error paths or when new fields are added in the future. The ACVP     patches also contain two user-space interface files: algif_kpp.c and algif_akcipher.c. These too rely on     proper initialization of their context structures. A particular issue has been observed with the newly     added 'inflight' variable introduced in af_alg_ctx by commit: 67b164a871af (crypto: af_alg - Disallow     multiple in-flight AIO requests) Because the context is not memset to zero after allocation, the inflight     variable has contained garbage values. As a result, af_alg_alloc_areq() has incorrectly returned -EBUSY     randomly when the garbage value was interpreted as true:
    https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209 The check directly tests ctx->inflight     without explicitly comparing against true/false. Since inflight is only ever set to true or false later,     an uninitialized value has triggered -EBUSY failures. Zero-initializing memory allocated with     sock_kmalloc() ensures inflight and other fields start in a known state, removing random issues caused by     uninitialized data. (CVE-2025-71113)

  - In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for     %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte     stack buffers with %pISpc. That is too small for the longest current-tree IPv6-with-port form the     formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for     v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as     [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50     visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50]     buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch     the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum     current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier     mapped-v4 example (CVE-2026-31630)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for     partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are     adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous     set checks on start elements for this reason. However, it is possible to add intervals that overlap to     this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A     C Restore the check on overlapping start elements to report an overlap. (CVE-2026-45873)

  - In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-     chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;)     and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the     terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of     iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond     the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops     to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and     atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since     most are connector- based) 256 is a generous upper bound. (cherry picked from commit     95700a3d660287ed657d6892f7be9ffc0e294a93) (CVE-2026-53138)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1792234299 advisory.

  - nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote     attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte     nfta_payload attribute, an skb_pull can encounter a negative skb->len. (CVE-2022-36946)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix a memory     corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct     ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is     fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct     ieee80211_channel'. So only 1 element is allocated in this array. When doing:
    mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the     'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void
    *)((u8 *)mvm->nvm_data->channels + 1); because of the (u8 *) cast, we add only 1 to the address of the     beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just     after. Remove the spurious casting so that the pointer arithmetic works as expected. (CVE-2023-52531)

  - In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Don't (re)check L1     intercepts when completing userspace I/O When completing emulation of instruction that generated a     userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction     execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies     the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted     despite already having emulated the I/O access. Pivot on EMULTYPE_NO_DECODE to detect that KVM is     completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended     recipient) can reach the code in question. gp_interception()'s use is mutually exclusive with     is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with     EMULTYPE_SKIP. The bad behavior was detected by a syzkaller program that toggles port I/O interception     during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due     to KVM no completing emulation of the I/O instruction. WARNING: CPU: 23 PID: 1083 at     arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass     CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware     name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170     [kvm] PKRU: 55555554 Call Trace: <TASK> kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610     [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
    __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>     (CVE-2025-40026)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free     on registration failure Make sure to release the sibling interfaces in case controller registration fails     to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by     Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. (CVE-2026-64471)

  - In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the     sample count to the packet payload isight_packet() takes the frame count from the device iso packet and     checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if     (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso     header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples()     then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 *     MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past     MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area.
    The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET     keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches     this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. (CVE-2026-64483)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792243434 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns:
    hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >=     DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of     port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
    because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array     overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function     returns. (CVE-2021-47548)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage     warning I received the following warning while running cthon against an ontap server running pNFS: [     57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523]     6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525]     net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that     might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks     held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted     6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU     Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [     57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556]     rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596]     rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621]     ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646]     rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ?
    __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [     57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728]     ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754]     nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [     57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files     e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4     c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ?
    __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891]     nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913]     do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921]     filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930]     nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947]     nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969]
    __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [     57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982]     RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00     90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83     ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX:
    0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [     57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP:
    00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated---     (CVE-2023-52623)

  - In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal     suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is     caused by the fact that the postsuspend and resume methods were not paired correctly; there were two     consecutive calls to the origin_postsuspend function. The second call attempts to remove the hash_list     entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it     calls the preresume and resume methods of the table's targets. If a preresume method of some target fails,     we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return     errors. We can't return success, because then the resume and postsuspend methods would not be paired     correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools,     but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56!     invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware     name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP:
    0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX:
    000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0     RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10:
    0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0     R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010     DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0     Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ?     do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ?
    __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0     [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot]     dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0     [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10     [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0     entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]---     (CVE-2024-26880)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending     destroy work before exit_net release Similar to 2c9f0293280e (netfilter: nf_tables: flush pending destroy     work before netlink notifier) to address a race between exit_net and the destroy workqueue. The trace     below shows an element to be released via destroy workqueue while exit_net path (triggered via module     removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-     use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at     addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not     tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [     1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014]     print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ?
    __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590     [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ?     nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312]     nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ?
    __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [     1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ?
    __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10     [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690]     ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726]     kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750]
    __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771]     nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [     1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [     1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953]
    ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120     [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [     1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019]     kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036]
    __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0     [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221]     ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236]     unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254]     nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [     1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list
    *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349     list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list);
    11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354     list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356     nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat
    ---truncated--- (CVE-2024-35899)

  - In the Linux kernel, the following vulnerability has been resolved: drm/client: Fully protect modes[] with     dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which     are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time     we use it the elements may already be pointing to freed/reused memory. (CVE-2024-35950)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6568 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6568-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     October 16, 2026                      https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.113-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each     outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where     actual_length is the unsigned length the device reported for the matching IN packet. A packet completed     with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet     is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on     out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without     the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN     packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long     descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard     the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits     in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length by the buffer size     while keeping each packet length aligned to a whole output frame. BUG: KASAN: out-of-bounds in     usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) Write of size 18446744073709551456 at addr     ffff88802a3d0000 by task vhci_rx/5018 Call Trace: dump_stack_lvl (lib/dump_stack.c:94     lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report     (mm/kasan/report.c:595) kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200) __asan_memset     (mm/kasan/shadow.c:84) usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338) __usb_hcd_giveback_urb     (drivers/usb/core/hcd.c:1657) usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741) vhci_rx_loop     (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242) kthread (kernel/kthread.c:436)     ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Allocated     by task 10: __kmalloc_cache_noprof (mm/slub.c:5563) usb6fire_pcm_init (sound/usb/6fire/pcm.c:560     sound/usb/6fire/pcm.c:595) usb6fire_chip_probe (sound/usb/6fire/chip.c:133) usb_probe_interface     (drivers/usb/core/driver.c:399) The buggy address belongs to the object at ffff88802a3d0000 which belongs     to the cache kmalloc-8k of size 8192 The buggy address is located 0 bytes inside of 4832-byte region     [ffff88802a3d0000, ffff88802a3d12e0) Kernel panic - not syncing: Fatal exception in interrupt     (CVE-2026-98312)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
372044	CentOS Linux 8.4 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.4:CLSA-2026:1792979607)	Nessus	CentOS Local Security Checks	Local	high
371988	CentOS Linux 8.5 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.5:CLSA-2026:1792979985)	Nessus	CentOS Local Security Checks	Local	high
370518	Debian dla-4850 : ata-modules-6.12.107+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
369491	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792445930)	Nessus	Rocky Linux Local Security Checks	Local	high
369490	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792445930)	Nessus	Alma Linux Local Security Checks	Local	high
369489	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1792234299)	Nessus	CentOS Local Security Checks	Local	high
366919	Debian dla-4841 : ata-modules-6.1.0-53-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
366778	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792243434)	Nessus	Alma Linux Local Security Checks	Local	medium
366507	Debian dsa-6568 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
363189	Linux Distros Unpatched Vulnerability : CVE-2026-98312	Nessus	Misc.	Local	medium

Detections

Analytics

CVE-2026-98312

medium

Tenable Plugins

high

high

high

high

high

high

high

medium

high

medium