In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792762308 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w     reset and tm thread for reply queue When the task management thread processes reply queues while the reset     thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset     thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize     access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to     block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits     up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as     unrecoverable. (CVE-2025-37861)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send     timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if     the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT     timers. Should fix the BUG: sporadically seen by BlueZ test bot (in Mesh - Send cancel - 1 test). Log:
    ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36:
    kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60
    __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0     vhci_release+0x18b/0x240 ------ (CVE-2025-40284)

  - In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-     elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream     while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two     operations shall be synchronized to avoid slab-use-after-free or worse errors. (CVE-2025-40344)

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in     ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an     outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and     passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm.
    The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an     attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside     icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This     would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a     fake TLV without checking if the remaining packet length can hold the full 18-byte struct     ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the     packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and     ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err()     needs to be changed. A separate patch would be better anyway. (CVE-2026-43038)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in     rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before     copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to     free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init()     (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second     rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this:
    kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe]     rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150     [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. (CVE-2026-45852)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792762308 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w     reset and tm thread for reply queue When the task management thread processes reply queues while the reset     thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset     thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize     access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to     block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits     up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as     unrecoverable. (CVE-2025-37861)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send     timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if     the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT     timers. Should fix the BUG: sporadically seen by BlueZ test bot (in Mesh - Send cancel - 1 test). Log:
    ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36:
    kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60
    __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0     vhci_release+0x18b/0x240 ------ (CVE-2025-40284)

  - In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-     elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream     while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two     operations shall be synchronized to avoid slab-use-after-free or worse errors. (CVE-2025-40344)

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in     ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an     outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and     passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm.
    The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an     attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside     icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This     would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a     fake TLV without checking if the remaining packet length can hold the full 18-byte struct     ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the     packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and     ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err()     needs to be changed. A separate patch would be better anyway. (CVE-2026-43038)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in     rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before     copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to     free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init()     (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second     rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this:
    kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe]     rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150     [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. (CVE-2026-45852)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.4 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.4:CLSA-2026:1792749577 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in     reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because     it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it     complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag     marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail     to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to     destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after     copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches     skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result,     the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while     reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses     skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is     one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() /     xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an     unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray     writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the     source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into     freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on     its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list().
    The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a     direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's     frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each     sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in     tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue     into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for     consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but     a future consumer depending on the marker would regress silently. The same omission exists in     skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds     frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold     frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.
    (CVE-2026-43503)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before     using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any     validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a     user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to     user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an     out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to     userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory     allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which     properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same     validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
    (CVE-2026-45856)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short     ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at     least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data     at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-     zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into     inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize     from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null),     exposed authencesn instances whose default authsize was invalid even though setauthsize() would have     rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an     out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range     1..3 so that no tfm can inherit an unsupported default authsize. (CVE-2026-46033)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before     payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least     header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the     attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen -     offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size()     underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) +     RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave     payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating     pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) +     RXE_ICRC_SIZE. (CVE-2026-46043)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792751700 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in     l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we     can follow what udpv6 does and subtract the transhdrlen from the max. (CVE-2022-49727)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack     slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since     6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses     were permitted above state->allocated_stack, but not below it. In other words, if the stack was already     large enough, the access was permitted, but otherwise the access was rejected instead of being allowed     to grow the stack. This undesired rejection was happening in two places: - in     check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these     accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of     them were changed to add also run unprivileged, in which case the old behavior persists. One tests     couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also     fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same     commit as the first one because they're inter-related. Before this patch, writes to the stack using     registers containing a variable offset (as opposed to registers with fixed, known values) were not     properly contributing to the function's needed stack size. As a result, it was possible for a program to     verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been     allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth,     which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling     update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the     variable offset. This was incorrect; the minimum possible value of that register should be used instead.
    This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by     lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The     code is now simpler and more convincingly tracks the correct maximum stack size.
    check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this     helps with the fix for the first issue. A few tests were changed to also check the stack depth     computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
    (CVE-2023-52452)

  - In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL     derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before     using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
    (CVE-2023-53066)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix     a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the     svc_rqst will not be cleaned up. (CVE-2023-53131)

  - In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Add check for kstrdup Add     check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer     dereference. (CVE-2023-54189)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4850 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4850-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     October 22, 2026                              https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.113-1~deb12u1     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-98433 CVE-2026-98435 CVE-2026-98440 CVE-2026-98441                      CVE-2026-98442 CVE-2026-98443 CVE-2026-98445 CVE-2026-98448                      CVE-2026-98450 CVE-2026-98451 CVE-2026-98452 CVE-2026-98453                      CVE-2026-98454 CVE-2026-98455 CVE-2026-98456 CVE-2026-98457                      CVE-2026-98458 CVE-2026-98459 CVE-2026-98460 CVE-2026-98461                      CVE-2026-98462 CVE-2026-98464 CVE-2026-98465 CVE-2026-98468                      CVE-2026-98473 CVE-2026-98475 CVE-2026-98476 CVE-2026-98477                      CVE-2026-98479 CVE-2026-98481 CVE-2026-98482 CVE-2026-98483                      CVE-2026-98484 CVE-2026-98485 CVE-2026-98486 CVE-2026-98487                      CVE-2026-98488 CVE-2026-98489 CVE-2026-98490 CVE-2026-98491                      CVE-2026-98493 CVE-2026-98494 CVE-2026-98495 CVE-2026-98498                      CVE-2026-98499 CVE-2026-98501 CVE-2026-98502 CVE-2026-98503                      CVE-2026-98504 CVE-2026-98505 CVE-2026-98506 CVE-2026-98507                      CVE-2026-98508 CVE-2026-98509 CVE-2026-98510 CVE-2026-98511                      CVE-2026-98512 CVE-2026-98513 CVE-2026-98514 CVE-2026-98515                      CVE-2026-98516 CVE-2026-98517 CVE-2026-98519 CVE-2026-98521                      CVE-2026-98522 CVE-2026-98523 CVE-2026-98524 CVE-2026-98525                      CVE-2026-98526 CVE-2026-98527 CVE-2026-98528 CVE-2026-98529                      CVE-2026-98531 CVE-2026-98532 CVE-2026-98533 CVE-2026-98534                      CVE-2026-98535 CVE-2026-98536 CVE-2026-98537 CVE-2026-98538                      CVE-2026-98539 CVE-2026-98541 CVE-2026-98544 CVE-2026-98545                      CVE-2026-98546 CVE-2026-98547 CVE-2026-98548 CVE-2026-98549                      CVE-2026-98550 CVE-2026-98553 CVE-2026-98554 CVE-2026-98555                      CVE-2026-98559 CVE-2026-98561 CVE-2026-98565 CVE-2026-98566                      CVE-2026-98567 CVE-2026-98568 CVE-2026-98569 CVE-2026-98572                      CVE-2026-98573 CVE-2026-98575 CVE-2026-98576 CVE-2026-98577                      CVE-2026-98578 CVE-2026-98579 CVE-2026-98580 CVE-2026-98581                      CVE-2026-98582 CVE-2026-98583 CVE-2026-98586 CVE-2026-98588                      CVE-2026-98590 CVE-2026-98591 CVE-2026-98593 CVE-2026-98594                      CVE-2026-98596 CVE-2026-98597 CVE-2026-98600 CVE-2026-98601                      CVE-2026-98602 CVE-2026-98605 CVE-2026-98606 CVE-2026-98607                      CVE-2026-98608 CVE-2026-98609 CVE-2026-98610 CVE-2026-98611                      CVE-2026-98612 CVE-2026-98613 CVE-2026-98614 CVE-2026-98615                      CVE-2026-98618 CVE-2026-98620 CVE-2026-98621 CVE-2026-98622                      CVE-2026-98623 CVE-2026-98624 CVE-2026-98625 CVE-2026-98626                      CVE-2026-98629 CVE-2026-98631 CVE-2026-98632 CVE-2026-98634                      CVE-2026-98636 CVE-2026-98640 CVE-2026-98641 CVE-2026-98642                      CVE-2026-98643 CVE-2026-98644 CVE-2026-98646 CVE-2026-98647                      CVE-2026-98655 CVE-2026-98656 CVE-2026-98657 CVE-2026-98658                      CVE-2026-98660 CVE-2026-98661 CVE-2026-98662 CVE-2026-98663                      CVE-2026-98664 CVE-2026-98665 CVE-2026-98666 CVE-2026-98668                      CVE-2026-98669 CVE-2026-98670 CVE-2026-98671 CVE-2026-98672                      CVE-2026-98673 CVE-2026-98677 CVE-2026-98679 CVE-2026-98680                      CVE-2026-98681 CVE-2026-98686 CVE-2026-98687 CVE-2026-98694                      CVE-2026-98695 CVE-2026-98696 CVE-2026-98697 CVE-2026-98698                      CVE-2026-98699 CVE-2026-98700 CVE-2026-98701 CVE-2026-98702                      CVE-2026-98703 CVE-2026-98704 CVE-2026-98705 CVE-2026-98706                      CVE-2026-98707 CVE-2026-98708 CVE-2026-98709 CVE-2026-98710                      CVE-2026-98711 CVE-2026-98713 CVE-2026-98716 CVE-2026-98717                      CVE-2026-98720 CVE-2026-98721 CVE-2026-98722 CVE-2026-98725                      CVE-2026-98726 CVE-2026-98727 CVE-2026-98728 CVE-2026-98730                      CVE-2026-98731 CVE-2026-98732 CVE-2026-98733 CVE-2026-98734                      CVE-2026-98735 CVE-2026-98736 CVE-2026-98737 CVE-2026-98738                      CVE-2026-98739 CVE-2026-98741 CVE-2026-98742 CVE-2026-98743                      CVE-2026-98744 CVE-2026-98745 CVE-2026-98746 CVE-2026-98748                      CVE-2026-98749 CVE-2026-98750 CVE-2026-98751 CVE-2026-98752                      CVE-2026-98753 CVE-2026-98754 CVE-2026-98755 CVE-2026-98756                      CVE-2026-98757 CVE-2026-98758 CVE-2026-98760 CVE-2026-98761                      CVE-2026-98762 CVE-2026-98763 CVE-2026-98764 CVE-2026-98765                      CVE-2026-98766 CVE-2026-98767 CVE-2026-98768 CVE-2026-98769                      CVE-2026-98770 CVE-2026-98771 CVE-2026-98772 CVE-2026-98773                      CVE-2026-98775 CVE-2026-98777 CVE-2026-98778 CVE-2026-98779                      CVE-2026-98780 CVE-2026-98781 CVE-2026-98782 CVE-2026-98783                      CVE-2026-98784 CVE-2026-98785 CVE-2026-98790 CVE-2026-98791                      CVE-2026-98792 CVE-2026-98793 CVE-2026-98794 CVE-2026-98796                      CVE-2026-98797 CVE-2026-98798 CVE-2026-98801 CVE-2026-98805                      CVE-2026-98807 CVE-2026-98808 CVE-2026-98809 CVE-2026-98811                      CVE-2026-98812 CVE-2026-98819 CVE-2026-98822 CVE-2026-98823                      CVE-2026-98825 CVE-2026-98826 CVE-2026-98827 CVE-2026-98828                      CVE-2026-98830 CVE-2026-98831 CVE-2026-98833 CVE-2026-98835                      CVE-2026-98836 CVE-2026-98837 CVE-2026-98838 CVE-2026-98840                      CVE-2026-98841 CVE-2026-98844 CVE-2026-98845 CVE-2026-98846                      CVE-2026-98847 CVE-2026-98848 CVE-2026-98849 CVE-2026-98850                      CVE-2026-98851 CVE-2026-98852 CVE-2026-98854 CVE-2026-98855                      CVE-2026-98856 CVE-2026-98857 CVE-2026-98858 CVE-2026-98859                      CVE-2026-98860 CVE-2026-98862 CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.113-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.112 and 6.12.113.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1792234299 advisory.

  - nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote     attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte     nfta_payload attribute, an skb_pull can encounter a negative skb->len. (CVE-2022-36946)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix a memory     corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct     ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is     fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct     ieee80211_channel'. So only 1 element is allocated in this array. When doing:
    mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the     'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void
    *)((u8 *)mvm->nvm_data->channels + 1); because of the (u8 *) cast, we add only 1 to the address of the     beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just     after. Remove the spurious casting so that the pointer arithmetic works as expected. (CVE-2023-52531)

  - In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Don't (re)check L1     intercepts when completing userspace I/O When completing emulation of instruction that generated a     userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction     execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies     the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted     despite already having emulated the I/O access. Pivot on EMULTYPE_NO_DECODE to detect that KVM is     completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended     recipient) can reach the code in question. gp_interception()'s use is mutually exclusive with     is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with     EMULTYPE_SKIP. The bad behavior was detected by a syzkaller program that toggles port I/O interception     during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due     to KVM no completing emulation of the I/O instruction. WARNING: CPU: 23 PID: 1083 at     arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass     CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware     name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170     [kvm] PKRU: 55555554 Call Trace: <TASK> kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610     [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
    __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>     (CVE-2025-40026)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free     on registration failure Make sure to release the sibling interfaces in case controller registration fails     to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by     Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. (CVE-2026-64471)

  - In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the     sample count to the packet payload isight_packet() takes the frame count from the device iso packet and     checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if     (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso     header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples()     then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 *     MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past     MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area.
    The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET     keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches     this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. (CVE-2026-64483)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS-STREAM8:CLSA-2026:1792239979 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: kyber: fix out of bounds access when     preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to
    ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the     corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls     to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx.
    This works accidentally most of the time, but it can cause us to read garbage if the second ctx came     from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This     manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-     bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int     [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40
    __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480     do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100     submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0     btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440
    __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0     extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0     writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660     wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240     ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge()     instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch.
    (CVE-2021-46984)

  - A use-after-free flaw was found in the Linux kernel's SGI GRU driver in the way the first     gru_file_unlocked_ioctl function is called by the user, where a fail pass occurs in the     gru_check_chiplet_assignment function. This flaw allows a local user to crash or potentially escalate     their privileges on the system. (CVE-2022-3424)

  - In the Linux kernel, the following vulnerability has been resolved: bpf, test_run: Fix alignment problem     in bpf_prog_test_run_skb() We got a syzkaller problem because of aarch64 alignment fault if KFENCE     enabled. When the size from user bpf program is an odd number, like 399, 407, etc, it will cause the     struct skb_shared_info's unaligned access. As seen below: BUG: KFENCE: use-after-free read in
    __skb_clone+0x23c/0x2a0 net/core/skbuff.c:1032 Use-after-free read at 0xffff6254fffac077 (in kfence-#213):
    __lse_atomic_add arch/arm64/include/asm/atomic_lse.h:26 [inline] arch_atomic_add     arch/arm64/include/asm/atomic.h:28 [inline] arch_atomic_inc include/linux/atomic-arch-fallback.h:270     [inline] atomic_inc include/asm-generic/atomic-instrumented.h:241 [inline] __skb_clone+0x23c/0x2a0     net/core/skbuff.c:1032 skb_clone+0xf4/0x214 net/core/skbuff.c:1481 ____bpf_clone_redirect     net/core/filter.c:2433 [inline] bpf_clone_redirect+0x78/0x1c0 net/core/filter.c:2420     bpf_prog_d3839dd9068ceb51+0x80/0x330 bpf_dispatcher_nop_func include/linux/bpf.h:728 [inline]     bpf_test_run+0x3c0/0x6c0 net/bpf/test_run.c:53 bpf_prog_test_run_skb+0x638/0xa7c net/bpf/test_run.c:594     bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf kernel/bpf/syscall.c:4441 [inline]
    __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381 kfence-#213: 0xffff6254fffac000-0xffff6254fffac196,     size=407, cache=kmalloc-512 allocated by task 15074 on cpu 0 at 1342.585390s: kmalloc     include/linux/slab.h:568 [inline] kzalloc include/linux/slab.h:675 [inline]     bpf_test_init.isra.0+0xac/0x290 net/bpf/test_run.c:191 bpf_prog_test_run_skb+0x11c/0xa7c     net/bpf/test_run.c:512 bpf_prog_test_run kernel/bpf/syscall.c:3148 [inline] __do_sys_bpf     kernel/bpf/syscall.c:4441 [inline] __se_sys_bpf+0xad0/0x1634 kernel/bpf/syscall.c:4381
    __arm64_sys_bpf+0x50/0x60 kernel/bpf/syscall.c:4381 To fix the problem, we adjust @size so that (@size +     @hearoom) is a multiple of SMP_CACHE_BYTES. So we make sure the struct skb_shared_info is aligned to a     cache line. (CVE-2022-49840)

  - In the Linux kernel, the following vulnerability has been resolved: usbnet: Fix linkwatch use-after-free     on disconnect usbnet uses the work usbnet_deferred_kevent() to perform tasks which may sleep. On     disconnect, completion of the work was originally awaited in ->ndo_stop(). But in 2003, that was moved to
    ->disconnect() by historic commit [PATCH] USB: usbnet, prevent exotic rtnl deadlock:
    https://git.kernel.org/tglx/history/c/0f138bbfd83c The change was made because back then, the kernel's     workqueue implementation did not allow waiting for a single work. One had to wait for completion of *all*     work by calling flush_scheduled_work(), and that could deadlock when waiting for usbnet_deferred_kevent()     with rtnl_mutex held in ->ndo_stop(). The commit solved one problem but created another: It causes a use-     after-free in USB Ethernet drivers aqc111.c, asix_devices.c, ax88179_178a.c, ch9200.c and smsc75xx.c: * If     the drivers receive a link change interrupt immediately before disconnect, they raise EVENT_LINK_RESET in     their (non-sleepable) ->status() callback and schedule usbnet_deferred_kevent(). *     usbnet_deferred_kevent() invokes the driver's ->link_reset() callback, which calls     netif_carrier_{on,off}(). * That in turn schedules the work linkwatch_event(). Because     usbnet_deferred_kevent() is awaited after unregister_netdev(), netif_carrier_{on,off}() may operate on an     unregistered netdev and linkwatch_event() may run after free_netdev(), causing a use-after-free. In 2010,     usbnet was changed to only wait for a single instance of usbnet_deferred_kevent() instead of *all* work by     commit 23f333a2bfaf (drivers/net: don't use flush_scheduled_work()). Unfortunately the commit neglected     to move the wait back to ->ndo_stop(). Rectify that omission at long last. (CVE-2022-50220)

  - In the Linux kernel, the following vulnerability has been resolved: cifs: fix oops during encryption When     running xfstests against Azure the following oops occurred on an arm64 system Unable to handle kernel     write to read-only memory at virtual address ffff0001221cf000 Mem abort info: ESR = 0x9600004f EC = 0x25:
    DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x0f: level 3 permission fault     Data abort info: ISV = 0, ISS = 0x0000004f CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs,     pgdp=00000000294f3000 [ffff0001221cf000] pgd=18000001ffff8003, p4d=18000001ffff8003, pud=18000001ff82e003,     pmd=18000001ff71d003, pte=00600001221cf787 Internal error: Oops: 9600004f [#1] PREEMPT SMP ... pstate:
    80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) pc : __memcpy+0x40/0x230 lr :
    scatterwalk_copychunks+0xe0/0x200 sp : ffff800014e92de0 x29: ffff800014e92de0 x28: ffff000114f9de80 x27:
    0000000000000008 x26: 0000000000000008 x25: ffff800014e92e78 x24: 0000000000000008 x23: 0000000000000001     x22: 0000040000000000 x21: ffff000000000000 x20: 0000000000000001 x19: ffff0001037c4488 x18:
    0000000000000014 x17: 235e1c0d6efa9661 x16: a435f9576b6edd6c x15: 0000000000000058 x14: 0000000000000001     x13: 0000000000000008 x12: ffff000114f2e590 x11: ffffffffffffffff x10: 0000040000000000 x9 :
    ffff8000105c3580 x8 : 2e9413b10000001a x7 : 534b4410fb86b005 x6 : 534b4410fb86b005 x5 : ffff0001221cf008     x4 : ffff0001037c4490 x3 : 0000000000000001 x2 : 0000000000000008 x1 : ffff0001037c4488 x0 :
    ffff0001221cf000 Call trace: __memcpy+0x40/0x230 scatterwalk_map_and_copy+0x98/0x100     crypto_ccm_encrypt+0x150/0x180 crypto_aead_encrypt+0x2c/0x40 crypt_message+0x750/0x880     smb3_init_transform_rq+0x298/0x340 smb_send_rqst.part.11+0xd8/0x180 smb_send_rqst+0x3c/0x100     compound_send_recv+0x534/0xbc0 smb2_query_info_compound+0x32c/0x440 smb2_set_ea+0x438/0x4c0     cifs_xattr_set+0x5d4/0x7c0 This is because in scatterwalk_copychunks(), we attempted to write to a buffer     (@sign) that was allocated in the stack (vmalloc area) by crypt_message() and thus accessing its remaining     8 (x2) bytes ended up crossing a page boundary. To simply fix it, we could just pass @sign kmalloc'd from     crypt_message() and then we're done. Luckily, we don't seem to pass any other vmalloc'd buffers in     smb_rqst::rq_iov... Instead, let's map the correct pages and offsets from vmalloc buffers as well in     cifs_sg_set_buf() and then avoiding such oopses. (CVE-2022-50341)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6568 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6568-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     October 16, 2026                      https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.113-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the     non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback     (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and     brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an     explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has     completed before the timer structure is freed. (CVE-2026-98196)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
371428	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792762308)	Nessus	Rocky Linux Local Security Checks	Local	high
371426	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792762308)	Nessus	Alma Linux Local Security Checks	Local	high
371225	CentOS Linux 8.4 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.4:CLSA-2026:1792749577)	Nessus	CentOS Local Security Checks	Local	high
371223	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792751700)	Nessus	Alma Linux Local Security Checks	Local	high
370518	Debian dla-4850 : ata-modules-6.12.107+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
369489	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1792234299)	Nessus	CentOS Local Security Checks	Local	high
366919	Debian dla-4841 : ata-modules-6.1.0-53-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
366781	CentOS Linux 8 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS-STREAM8:CLSA-2026:1792239979)	Nessus	CentOS Local Security Checks	Local	high
366507	Debian dsa-6568 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
363233	Linux Distros Unpatched Vulnerability : CVE-2026-98196	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-98196

high

Tenable Plugins

high

high

high

high

high

high

high

high

high

high