In the Linux kernel, the following vulnerability has been resolved: idpf: disable DIM work before freeing q_vectors idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them. idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC. Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain. Use disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is reached. Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object. It is a race, not a deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is the way to see it.

There are packages installed that are affected by a vulnerability referenced in the following CVE:

  - In the Linux kernel, the following vulnerability has been resolved: idpf: disable DIM work before freeing
    q_vectors idpf never drains the Tx/Rx DIM works before freeing the memory they live in. tx_dim and rx_dim
    are embedded in struct idpf_q_vector, they are queued from the NAPI poll via net_dim(), and
    idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver cancels them.
    idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory: idpf_vport_intr_write_itr() writes the
    ITR register through q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of the freed
    q_vector. No configuration is needed to get there -- IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and
    idpf_vport_alloc() initialises both modes to IDPF_ITR_DYNAMIC. Draining after
    idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim() is called from inside the "if
    (napi_complete_done(napi, work_done))" branch of the poll, and napi_complete_done() has already cleared
    NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED |
    NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still queueing the work, and a
    plain cancel_work_sync() would be re-armed behind the drain. Use disable_work_sync(): schedule_work() on a
    work with a non-zero disable count is dropped by clear_pending_if_disabled() before __queue_work() is
    reached. Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are initialised on every path that
    can reach the drain -- the three "goto intr_deinit" sites between idpf_vport_intr_init() and
    idpf_vport_intr_ena() get there without the enable side having run. Nothing re-enables them:
    rsrc->q_vectors is freed on every exit from idpf_vport_open() and on every idpf_vport_stop(), so the count
    dies with the object. It is a race, not a deterministic failure -- net_dim() only schedules once
    DIM_NEVENTS events have accumulated and the profile index changes. A KASAN ifup/ifdown loop under load is
    the way to see it. (CVE-2026-97603)

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6568 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6568-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     October 16, 2026                      https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38204 CVE-2025-40158 CVE-2026-52988 CVE-2026-72315                      CVE-2026-72463 CVE-2026-74347 CVE-2026-80935 CVE-2026-80937                      CVE-2026-80939 CVE-2026-80980 CVE-2026-81016 CVE-2026-89437                      CVE-2026-89441 CVE-2026-89445 CVE-2026-89452 CVE-2026-89467                      CVE-2026-89500 CVE-2026-89503 CVE-2026-89520 CVE-2026-89527                      CVE-2026-89633 CVE-2026-89638 CVE-2026-89766 CVE-2026-89795                      CVE-2026-89797 CVE-2026-89806 CVE-2026-89827 CVE-2026-89832                      CVE-2026-89837 CVE-2026-89838 CVE-2026-89840 CVE-2026-89859                      CVE-2026-89868 CVE-2026-89912 CVE-2026-89921 CVE-2026-89956                      CVE-2026-89971 CVE-2026-89972 CVE-2026-89996 CVE-2026-90002                      CVE-2026-90013 CVE-2026-90016 CVE-2026-90023 CVE-2026-90029                      CVE-2026-90030 CVE-2026-90146 CVE-2026-93179 CVE-2026-93196                      CVE-2026-93199 CVE-2026-93200 CVE-2026-93231 CVE-2026-93243                      CVE-2026-93244 CVE-2026-93285 CVE-2026-97527 CVE-2026-97528                      CVE-2026-97529 CVE-2026-97530 CVE-2026-97531 CVE-2026-97532                      CVE-2026-97534 CVE-2026-97535 CVE-2026-97536 CVE-2026-97537                      CVE-2026-97549 CVE-2026-97558 CVE-2026-97559 CVE-2026-97566                      CVE-2026-97567 CVE-2026-97571 CVE-2026-97574 CVE-2026-97594                      CVE-2026-97597 CVE-2026-97603 CVE-2026-97609 CVE-2026-97615                      CVE-2026-97618 CVE-2026-97619 CVE-2026-97620 CVE-2026-97901                      CVE-2026-97906 CVE-2026-97918 CVE-2026-97919 CVE-2026-97933                      CVE-2026-97934 CVE-2026-97935 CVE-2026-97938 CVE-2026-97939                      CVE-2026-97949 CVE-2026-97950 CVE-2026-98101 CVE-2026-98161                      CVE-2026-98167 CVE-2026-98168 CVE-2026-98169 CVE-2026-98170                      CVE-2026-98171 CVE-2026-98172 CVE-2026-98173 CVE-2026-98174                      CVE-2026-98175 CVE-2026-98179 CVE-2026-98181 CVE-2026-98182                      CVE-2026-98184 CVE-2026-98185 CVE-2026-98186 CVE-2026-98187                      CVE-2026-98188 CVE-2026-98189 CVE-2026-98190 CVE-2026-98191                      CVE-2026-98192 CVE-2026-98193 CVE-2026-98194 CVE-2026-98195                      CVE-2026-98196 CVE-2026-98197 CVE-2026-98198 CVE-2026-98199                      CVE-2026-98200 CVE-2026-98201 CVE-2026-98202 CVE-2026-98203                      CVE-2026-98204 CVE-2026-98205 CVE-2026-98206 CVE-2026-98207                      CVE-2026-98208 CVE-2026-98209 CVE-2026-98210 CVE-2026-98211                      CVE-2026-98212 CVE-2026-98213 CVE-2026-98214 CVE-2026-98215                      CVE-2026-98216 CVE-2026-98217 CVE-2026-98218 CVE-2026-98221                      CVE-2026-98222 CVE-2026-98227 CVE-2026-98229 CVE-2026-98230                      CVE-2026-98231 CVE-2026-98232 CVE-2026-98233 CVE-2026-98234                      CVE-2026-98235 CVE-2026-98236 CVE-2026-98237 CVE-2026-98238                      CVE-2026-98239 CVE-2026-98241 CVE-2026-98245 CVE-2026-98246                      CVE-2026-98247 CVE-2026-98248 CVE-2026-98249 CVE-2026-98251                      CVE-2026-98252 CVE-2026-98253 CVE-2026-98254 CVE-2026-98255                      CVE-2026-98257 CVE-2026-98260 CVE-2026-98261 CVE-2026-98262                      CVE-2026-98263 CVE-2026-98264 CVE-2026-98265 CVE-2026-98266                      CVE-2026-98267 CVE-2026-98269 CVE-2026-98270 CVE-2026-98271                      CVE-2026-98272 CVE-2026-98275 CVE-2026-98276 CVE-2026-98282                      CVE-2026-98283 CVE-2026-98287 CVE-2026-98290 CVE-2026-98291                      CVE-2026-98293 CVE-2026-98295 CVE-2026-98297 CVE-2026-98298                      CVE-2026-98299 CVE-2026-98300 CVE-2026-98301 CVE-2026-98302                      CVE-2026-98303 CVE-2026-98306 CVE-2026-98307 CVE-2026-98308                      CVE-2026-98309 CVE-2026-98311 CVE-2026-98312 CVE-2026-98314                      CVE-2026-98316 CVE-2026-98319 CVE-2026-98320 CVE-2026-98322                      CVE-2026-98323 CVE-2026-98325 CVE-2026-98326 CVE-2026-98327                      CVE-2026-98328 CVE-2026-98329 CVE-2026-98331 CVE-2026-98334                      CVE-2026-98335 CVE-2026-98336 CVE-2026-98337 CVE-2026-98339                      CVE-2026-98340 CVE-2026-98342 CVE-2026-98343 CVE-2026-98344                      CVE-2026-98345 CVE-2026-98346 CVE-2026-98347 CVE-2026-98348                      CVE-2026-98349 CVE-2026-98351 CVE-2026-98352 CVE-2026-98354                      CVE-2026-98357 CVE-2026-98358 CVE-2026-98359 CVE-2026-98360                      CVE-2026-98362 CVE-2026-98363 CVE-2026-98365 CVE-2026-98366                      CVE-2026-98367 CVE-2026-98368 CVE-2026-98369 CVE-2026-98370                      CVE-2026-98373 CVE-2026-98374 CVE-2026-98375 CVE-2026-98377                      CVE-2026-98378 CVE-2026-98379 CVE-2026-98380 CVE-2026-98381                      CVE-2026-98382 CVE-2026-98383 CVE-2026-98384 CVE-2026-98386                      CVE-2026-98403 CVE-2026-98406 CVE-2026-98407 CVE-2026-98409                      CVE-2026-98410 CVE-2026-98411 CVE-2026-98412 CVE-2026-98413                      CVE-2026-98416 CVE-2026-98417 CVE-2026-98419 CVE-2026-98421                      CVE-2026-98422 CVE-2026-98423 CVE-2026-98425 CVE-2026-98426                      CVE-2026-98428 CVE-2026-98429 CVE-2026-98430 CVE-2026-98432                      CVE-2026-99999     Debian Bug     : 1149499 1149564 1150891

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.113-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - idpf: disable DIM work before freeing q_vectors idpf never drains the Tx/Rx DIM works before freeing the     memory they live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they are queued from the NAPI     poll via net_dim(), and idpf_vport_intr_rel() ends with kfree(rsrc->q_vectors). Nothing in the driver     cancels them. idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:
    idpf_vport_intr_write_itr() writes the ITR register through q_vector->intr_reg.tx_itr / rx_itr, void
    __iomem pointers loaded out of the freed q_vector. No configuration is needed to get there --     IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc() initialises both modes to     IDPF_ITR_DYNAMIC. Draining after idpf_vport_intr_napi_dis_all() is not enough on its own. idpf_net_dim()     is called from inside the if (napi_complete_done(napi, work_done)) branch of the poll, and     napi_complete_done() has already cleared NAPIF_STATE_SCHED by then. napi_disable_locked() waits only while     (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is still     queueing the work, and a plain cancel_work_sync() would be re-armed behind the drain. Use     disable_work_sync(): schedule_work() on a work with a non-zero disable count is dropped by     clear_pending_if_disabled() before __queue_work() is reached. Move idpf_init_dim() to     idpf_vport_intr_alloc() so the works are initialised on every path that can reach the drain -- the three     goto intr_deinit sites between idpf_vport_intr_init() and idpf_vport_intr_ena() get there without the     enable side having run. Nothing re-enables them: rsrc->q_vectors is freed on every exit from     idpf_vport_open() and on every idpf_vport_stop(), so the count dies with the object. It is a race, not a     deterministic failure -- net_dim() only schedules once DIM_NEVENTS events have accumulated and the profile     index changes. A KASAN ifup/ifdown loop under load is the way to see it. (CVE-2026-97603)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
475460	Google: sys-kernel/cchost-kernel-6_12, sys-kernel/cchost-kernel-6_18, sys-kernel/csql-kernel-6_12, sys-kernel/csql-kernel-6_18, sys-kernel/lakitu-kernel-6_12, sys-kernel/lakitu-kernel-6_18, sys-kernel/lakitu-nc-kernel-6_12, sys-kernel/lakitu-nc-kernel-6_18: security update to 19999.44.106	Tenable Cloud Security	Google COS Security Checks	Local	medium
475460	Google: sys-kernel/cchost-kernel-6_12, sys-kernel/cchost-kernel-6_18, sys-kernel/csql-kernel-6_12, sys-kernel/csql-kernel-6_18, sys-kernel/lakitu-kernel-6_12, sys-kernel/lakitu-kernel-6_18, sys-kernel/lakitu-nc-kernel-6_12, sys-kernel/lakitu-nc-kernel-6_18: security update to 19999.44.106	Tenable Self-Hosted Container Security	Google COS Security Checks	Local	medium
366507	Debian dsa-6568 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	Local	medium
350490	Linux Distros Unpatched Vulnerability : CVE-2026-97603	Nessus	Misc.	Local	medium

Detections

Analytics

CVE-2026-97603

medium

Tenable Plugins

medium

medium

medium

medium