In the Linux kernel, the following vulnerability has been resolved: smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid() exits without touching mid->resp_buf or the server buffer pointers.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-146705 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2

    When a valid primary TRANSACT2 response has been received (mid->resp_buf     set, mid->multiRsp true) and a subsequent secondary response causes     cifs_check_trans2() to return false -- either because the SMB header is     invalid (malformed != 0) or because check2ndT2() rejects the PDU --     handle_mid() overwrites mid->resp_buf with the new buffer (leaking the     primary buffer) and, because mid->multiRsp is set, skips the     server->smallbuf/bigbuf NULL-out.  When the user thread frees     mid->resp_buf, server->smallbuf or server->bigbuf is left dangling; the     demux thread reuses it for the next packet, resulting in a use-after-free.

    Combine both early-exit conditions and, when mid->multiRsp is already     set, abort the pending transaction inline: set multiEnd, call     dequeue_mid() with malformed=true, and return true so handle_mid() exits     without touching mid->resp_buf or the server buffer pointers.

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.5 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.5:CLSA-2026:1792979985 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst     refcnt when egressing The egress tunnel code uses dst_clone() and directly sets the result which is wrong     because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers     the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and     checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following     refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134     [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm:
    ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX,     1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8     85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc     01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP:
    0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000     RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08:
    0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000     R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000)     GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2:
    00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge]
    __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa     [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ?     br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ?     vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
    __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2
    __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa     gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140     napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9     net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ?     smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6     ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1     dst_release underflow (CVE-2021-47222)

  - In the Linux kernel, the following vulnerability has been resolved: net: bridge: fix vlan tunnel dst null     pointer dereference This patch fixes a tunnel_dst null pointer dereference due to lockless access in the     tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a     grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking.
    Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make     sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we     don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked     in the egress path. (CVE-2021-47223)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Guard stack limits against 32bit     overflow This patch promotes the arithmetic around checking stack bounds to be done in the 64-bit domain,     instead of the current 32bit. The arithmetic implies adding together a 64-bit register with a int offset.
    The register was checked to be below 1<<29 when it was variable, but not when it was fixed. The offset     either comes from an instruction (in which case it is 16 bit), from another register (in which case the     caller checked it to be below 1<<29 [1]), or from the size of an argument to a kfunc (in which case it can     be a u32 [2]). Between the register being inconsistently checked to be below 1<<29, and the offset being     up to an u32, it appears that we were open to overflowing the `int`s which were currently used for     arithmetic. [1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf     /verifier.c#L7494-L7498 [2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e     9/kernel/bpf/verifier.c#L11904 (CVE-2023-52676)

  - In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in     reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because     it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it     complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.4 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.4:CLSA-2026:1792749577 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: cifs: fix session state check in     reconnect to avoid use-after-free issue Don't collect exiting session in smb2_reconnect_server(), because     it will be released soon. Note that the exiting session will stay in server->smb_ses_list until it     complete the cifs_free_ipc() and logoff() and then delete itself from the list. (CVE-2023-53794)

  - In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag     marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail     to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to     destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after     copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches     skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result,     the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while     reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses     skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is     one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() /     xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an     unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray     writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the     source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into     freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on     its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list().
    The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a     direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's     frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each     sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in     tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue     into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for     consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but     a future consumer depending on the marker would regress silently. The same omission exists in     skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds     frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold     frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.
    (CVE-2026-43503)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before     using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any     validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a     user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to     user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an     out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to     userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory     allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which     properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same     validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
    (CVE-2026-45856)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject short     ahash digests during instance creation authencesn requires either a zero authsize or an authsize of at     least 4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of high-order sequence number data     at the end of the authenticated data. While crypto_authenc_esn_setauthsize() already rejects explicit non-     zero authsizes in the range 1..3, crypto_authenc_esn_create() still copied auth->digestsize into     inst->alg.maxauthsize without validating it. The AEAD core then initialized the tfm's default authsize     from that value. As a result, selecting an ahash with digest size 1..3, such as cbcmac(cipher_null),     exposed authencesn instances whose default authsize was invalid even though setauthsize() would have     rejected the same value. AF_ALG could then trigger the ESN tail handling with a too-short tag and hit an     out-of-bounds access. Reject authencesn instances whose ahash digest size is in the invalid non-zero range     1..3 so that no tfm can inherit an unsupported default authsize. (CVE-2026-46033)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before     payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least     header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the     attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen -     offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size()     underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) +     RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave     payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating     pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) +     RXE_ICRC_SIZE. (CVE-2026-46043)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792445930 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted     memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause     set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers     need to take care to handle these errors to avoid returning decrypted (shared) memory to the page     allocator, which could lead to functional or security issues. Leak the decrypted memory when     set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call     WARN_ONCE(). (CVE-2024-57793)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - zero initialize     memory allocated via sock_kmalloc Several crypto user API contexts and requests allocated with     sock_kmalloc() were left uninitialized, relying on callers to set fields explicitly. This resulted in the     use of uninitialized data in certain error paths or when new fields are added in the future. The ACVP     patches also contain two user-space interface files: algif_kpp.c and algif_akcipher.c. These too rely on     proper initialization of their context structures. A particular issue has been observed with the newly     added 'inflight' variable introduced in af_alg_ctx by commit: 67b164a871af (crypto: af_alg - Disallow     multiple in-flight AIO requests) Because the context is not memset to zero after allocation, the inflight     variable has contained garbage values. As a result, af_alg_alloc_areq() has incorrectly returned -EBUSY     randomly when the garbage value was interpreted as true:
    https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209 The check directly tests ctx->inflight     without explicitly comparing against true/false. Since inflight is only ever set to true or false later,     an uninitialized value has triggered -EBUSY failures. Zero-initializing memory allocated with     sock_kmalloc() ensures inflight and other fields start in a known state, removing random issues caused by     uninitialized data. (CVE-2025-71113)

  - In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for     %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte     stack buffers with %pISpc. That is too small for the longest current-tree IPv6-with-port form the     formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for     v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as     [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50     visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50]     buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch     the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum     current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier     mapped-v4 example (CVE-2026-31630)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for     partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are     adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous     set checks on start elements for this reason. However, it is possible to add intervals that overlap to     this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A     C Restore the check on overlapping start elements to report an overlap. (CVE-2026-45873)

  - In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-     chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;)     and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the     terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of     iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond     the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops     to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and     atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since     most are connector- based) 256 is a generous upper bound. (cherry picked from commit     95700a3d660287ed657d6892f7be9ffc0e294a93) (CVE-2026-53138)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792445930 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: virt: tdx-guest: Just leak decrypted     memory on unrecoverable errors In CoCo VMs it is possible for the untrusted host to cause     set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers     need to take care to handle these errors to avoid returning decrypted (shared) memory to the page     allocator, which could lead to functional or security issues. Leak the decrypted memory when     set_memory_decrypted() fails, and don't need to print an error since set_memory_decrypted() will call     WARN_ONCE(). (CVE-2024-57793)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - zero initialize     memory allocated via sock_kmalloc Several crypto user API contexts and requests allocated with     sock_kmalloc() were left uninitialized, relying on callers to set fields explicitly. This resulted in the     use of uninitialized data in certain error paths or when new fields are added in the future. The ACVP     patches also contain two user-space interface files: algif_kpp.c and algif_akcipher.c. These too rely on     proper initialization of their context structures. A particular issue has been observed with the newly     added 'inflight' variable introduced in af_alg_ctx by commit: 67b164a871af (crypto: af_alg - Disallow     multiple in-flight AIO requests) Because the context is not memset to zero after allocation, the inflight     variable has contained garbage values. As a result, af_alg_alloc_areq() has incorrectly returned -EBUSY     randomly when the garbage value was interpreted as true:
    https://github.com/gregkh/linux/blame/master/crypto/af_alg.c#L1209 The check directly tests ctx->inflight     without explicitly comparing against true/false. Since inflight is only ever set to true or false later,     an uninitialized value has triggered -EBUSY failures. Zero-initializing memory allocated with     sock_kmalloc() ensures inflight and other fields start in a known state, removing random issues caused by     uninitialized data. (CVE-2025-71113)

  - In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for     %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte     stack buffers with %pISpc. That is too small for the longest current-tree IPv6-with-port form the     formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for     v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as     [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50     visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50]     buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch     the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum     current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier     mapped-v4 example (CVE-2026-31630)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: check for     partial overlaps in anonymous sets Userspace provides an optimized representation in case intervals are     adjacent, where the end element is omitted. The existing partial overlap detection logic skips anonymous     set checks on start elements for this reason. However, it is possible to add intervals that overlap to     this anonymous where two start elements with the same, eg. A-B, A-C where C < B. start end A B start end A     C Restore the check on overlapping start elements to report an overlap. (CVE-2026-45873)

  - In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-     chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;)     and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the     terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of     iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond     the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops     to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and     atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since     most are connector- based) 256 is a generous upper bound. (cherry picked from commit     95700a3d660287ed657d6892f7be9ffc0e294a93) (CVE-2026-53138)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1792234299 advisory.

  - nfqnl_mangle in net/netfilter/nfnetlink_queue.c in the Linux kernel through 5.18.14 allows remote     attackers to cause a denial of service (panic) because, in the case of an nf_queue verdict with a one-byte     nfta_payload attribute, an skb_pull can encounter a negative skb->len. (CVE-2022-36946)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: Fix a memory     corruption issue A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct     ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is     fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct     ieee80211_channel'. So only 1 element is allocated in this array. When doing:
    mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the     'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void
    *)((u8 *)mvm->nvm_data->channels + 1); because of the (u8 *) cast, we add only 1 to the address of the     beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just     after. Remove the spurious casting so that the pointer arithmetic works as expected. (CVE-2023-52531)

  - In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Don't (re)check L1     intercepts when completing userspace I/O When completing emulation of instruction that generated a     userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction     execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies     the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted     despite already having emulated the I/O access. Pivot on EMULTYPE_NO_DECODE to detect that KVM is     completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended     recipient) can reach the code in question. gp_interception()'s use is mutually exclusive with     is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with     EMULTYPE_SKIP. The bad behavior was detected by a syzkaller program that toggles port I/O interception     during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due     to KVM no completing emulation of the I/O instruction. WARNING: CPU: 23 PID: 1083 at     arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm] Modules linked in: kvm_intel kvm irqbypass     CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE Hardware     name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:emulator_pio_in_out+0x154/0x170     [kvm] PKRU: 55555554 Call Trace: <TASK> kvm_fast_pio+0xd6/0x1d0 [kvm] vmx_handle_exit+0x149/0x610     [kvm_intel] kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm] kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
    __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0x5d/0xc60 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK>     (CVE-2025-40026)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: fix use-after-free     on registration failure Make sure to release the sibling interfaces in case controller registration fails     to avoid use-after-free and double-free when they are eventually disconnected. This issue was reported by     Sashiko while reviewing a fix for a wakeup source leak in the btusb probe errors paths. (CVE-2026-64471)

  - In the Linux kernel, the following vulnerability has been resolved: ALSA: firewire: isight: bound the     sample count to the packet payload isight_packet() takes the frame count from the device iso packet and     checks it only against the device claimed iso length. count = be32_to_cpu(payload->sample_count); if     (likely(count <= (length - 16) / 4)) isight_samples(isight, payload->samples, count); length is the iso     header data_length. It can be up to 0xffff. So the gate allows a count up to about 16379. isight_samples()     then copies count frames out of payload->samples into the PCM DMA buffer. payload->samples holds only 2 *     MAX_FRAMES_PER_PACKET values. The device multiplexes two samples per frame. A count past     MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer size writes past runtime->dma_area.
    The smallest PCM buffer is larger than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET     keeps both the read and the write in range. A malicious or faulty Apple iSight on the FireWire bus reaches     this during a normal capture. Add the MAX_FRAMES_PER_PACKET bound to the gate. (CVE-2026-64483)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792243434 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ethernet: hisilicon: hns:
    hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() The if statement: if (port >=     DSAF_GE_NUM) return; limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of     port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
    because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6). To fix this possible array     overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function     returns. (CVE-2021-47548)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a suspicious RCU usage     warning I received the following warning while running cthon against an ontap server running pNFS: [     57.202521] ============================= [ 57.202522] WARNING: suspicious RCU usage [ 57.202523]     6.7.0-rc3-g2cc14f52aeb7 #41492 Not tainted [ 57.202525] ----------------------------- [ 57.202525]     net/sunrpc/xprtmultipath.c:349 RCU-list traversed in non-reader section!! [ 57.202527] other info that     might help us debug this: [ 57.202528] rcu_scheduler_active = 2, debug_locks = 1 [ 57.202529] no locks     held by test5/3567. [ 57.202530] stack backtrace: [ 57.202532] CPU: 0 PID: 3567 Comm: test5 Not tainted     6.7.0-rc3-g2cc14f52aeb7 #41492 5b09971b4965c0aceba19f3eea324a4a806e227e [ 57.202534] Hardware name: QEMU     Standard PC (Q35 + ICH9, 2009), BIOS unknown 2/2/2022 [ 57.202536] Call Trace: [ 57.202537] <TASK> [     57.202540] dump_stack_lvl+0x77/0xb0 [ 57.202551] lockdep_rcu_suspicious+0x154/0x1a0 [ 57.202556]     rpc_xprt_switch_has_addr+0x17c/0x190 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202596]     rpc_clnt_setup_test_and_add_xprt+0x50/0x180 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202621]     ? rpc_clnt_add_xprt+0x254/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202646]     rpc_clnt_add_xprt+0x27a/0x300 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [ 57.202671] ?
    __pfx_rpc_clnt_setup_test_and_add_xprt+0x10/0x10 [sunrpc ebe02571b9a8ceebf7d98e71675af20c19bdb1f6] [     57.202696] nfs4_pnfs_ds_connect+0x345/0x760 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202728]     ? __pfx_nfs4_test_session_trunk+0x10/0x10 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202754]     nfs4_fl_prepare_ds+0x75/0xc0 [nfs_layout_nfsv41_files e3a4187f18ae8a27b630f9feae6831b584a9360a] [     57.202760] filelayout_write_pagelist+0x4a/0x200 [nfs_layout_nfsv41_files     e3a4187f18ae8a27b630f9feae6831b584a9360a] [ 57.202765] pnfs_generic_pg_writepages+0xbe/0x230 [nfsv4     c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202788] __nfs_pageio_add_request+0x3fd/0x520 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202813] nfs_pageio_add_request+0x18b/0x390 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202831] nfs_do_writepage+0x116/0x1e0 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202849] nfs_writepages_callback+0x13/0x30 [nfs     6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202866] write_cache_pages+0x265/0x450 [ 57.202870] ?
    __pfx_nfs_writepages_callback+0x10/0x10 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202891]     nfs_writepages+0x141/0x230 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202913]     do_writepages+0xd2/0x230 [ 57.202917] ? filemap_fdatawrite_wbc+0x5c/0x80 [ 57.202921]     filemap_fdatawrite_wbc+0x67/0x80 [ 57.202924] filemap_write_and_wait_range+0xd9/0x170 [ 57.202930]     nfs_wb_all+0x49/0x180 [nfs 6c976fa593a7c2976f5a0aeb4965514a828e6902] [ 57.202947]     nfs4_file_flush+0x72/0xb0 [nfsv4 c716d88496ded0ea6d289bbea684fa996f9b57a9] [ 57.202969]
    __se_sys_close+0x46/0xd0 [ 57.202972] do_syscall_64+0x68/0x100 [ 57.202975] ? do_syscall_64+0x77/0x100 [     57.202976] ? do_syscall_64+0x77/0x100 [ 57.202979] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 57.202982]     RIP: 0033:0x7fe2b12e4a94 [ 57.202985] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00     90 f3 0f 1e fa 80 3d d5 18 0e 00 00 74 13 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 c3 0f 1f 00 48 83     ec 18 89 7c 24 0c e8 c3 [ 57.202987] RSP: 002b:00007ffe857ddb38 EFLAGS: 00000202 ORIG_RAX:
    0000000000000003 [ 57.202989] RAX: ffffffffffffffda RBX: 00007ffe857dfd68 RCX: 00007fe2b12e4a94 [     57.202991] RDX: 0000000000002000 RSI: 00007ffe857ddc40 RDI: 0000000000000003 [ 57.202992] RBP:
    00007ffe857dfc50 R08: 7fffffffffffffff R09: 0000000065650f49 [ 57.202993] R10: 00007f ---truncated---     (CVE-2023-52623)

  - In the Linux kernel, the following vulnerability has been resolved: dm: call the resume method on internal     suspend There is this reported crash when experimenting with the lvm2 testsuite. The list corruption is     caused by the fact that the postsuspend and resume methods were not paired correctly; there were two     consecutive calls to the origin_postsuspend function. The second call attempts to remove the hash_list     entry from a list, while it was already removed by the first call. Fix __dm_internal_resume so that it     calls the preresume and resume methods of the table's targets. If a preresume method of some target fails,     we are in a tricky situation. We can't return an error because dm_internal_resume isn't supposed to return     errors. We can't return success, because then the resume and postsuspend methods would not be paired     correctly. So, we set the DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace tools,     but it won't cause a kernel crash. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56!     invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4 Hardware     name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP:
    0010:__list_del_entry_valid_or_report+0x77/0xc0 <snip> RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282 RAX:
    000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff819053d0     RDI: 00000000ffffffff RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058 R10:
    0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001 R13: ffff88814538e000 R14: ffff888143bc6dc0     R15: ffffffffa02e4bb0 FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000 CS: 0010     DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0     Call Trace: <TASK> ? die+0x2d/0x80 ? do_trap+0xeb/0xf0 ? __list_del_entry_valid_or_report+0x77/0xc0 ?     do_error_trap+0x60/0x80 ? __list_del_entry_valid_or_report+0x77/0xc0 ? exc_invalid_op+0x49/0x60 ?
    __list_del_entry_valid_or_report+0x77/0xc0 ? asm_exc_invalid_op+0x16/0x20 ? table_deps+0x1b0/0x1b0     [dm_mod] ? __list_del_entry_valid_or_report+0x77/0xc0 origin_postsuspend+0x1a/0x50 [dm_snapshot]     dm_table_postsuspend_targets+0x34/0x50 [dm_mod] dm_suspend+0xd8/0xf0 [dm_mod] dev_suspend+0x1f2/0x2f0     [dm_mod] ? table_deps+0x1b0/0x1b0 [dm_mod] ctl_ioctl+0x300/0x5f0 [dm_mod] dm_compat_ctl_ioctl+0x7/0x10     [dm_mod] __x64_compat_sys_ioctl+0x104/0x170 do_syscall_64+0x184/0x1b0     entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0xf7e6aead <snip> ---[ end trace 0000000000000000 ]---     (CVE-2024-26880)

  - In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: flush pending     destroy work before exit_net release Similar to 2c9f0293280e (netfilter: nf_tables: flush pending destroy     work before netlink notifier) to address a race between exit_net and the destroy workqueue. The trace     below shows an element to be released via destroy workqueue while exit_net path (triggered via module     removal) has already released the set that is used in such transaction. [ 1360.547789] BUG: KASAN: slab-     use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.547861] Read of size 8 at     addr ffff888140500cc0 by task kworker/4:1/152465 [ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not     tainted 6.8.0+ #359 [ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [     1360.547984] Call Trace: [ 1360.547991] <TASK> [ 1360.547998] dump_stack_lvl+0x53/0x70 [ 1360.548014]     print_report+0xc4/0x610 [ 1360.548026] ? __virt_addr_valid+0xba/0x160 [ 1360.548040] ?
    __pfx__raw_spin_lock_irqsave+0x10/0x10 [ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590     [nf_tables] [ 1360.548176] kasan_report+0xae/0xe0 [ 1360.548189] ?     nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548312]     nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables] [ 1360.548447] ?
    __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables] [ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30 [     1360.548591] process_one_work+0x2f1/0x670 [ 1360.548610] worker_thread+0x4d3/0x760 [ 1360.548627] ?
    __pfx_worker_thread+0x10/0x10 [ 1360.548640] kthread+0x16b/0x1b0 [ 1360.548653] ? __pfx_kthread+0x10/0x10     [ 1360.548665] ret_from_fork+0x2f/0x50 [ 1360.548679] ? __pfx_kthread+0x10/0x10 [ 1360.548690]     ret_from_fork_asm+0x1a/0x30 [ 1360.548707] </TASK> [ 1360.548719] Allocated by task 192061: [ 1360.548726]     kasan_save_stack+0x20/0x40 [ 1360.548739] kasan_save_track+0x14/0x30 [ 1360.548750]
    __kasan_kmalloc+0x8f/0xa0 [ 1360.548760] __kmalloc_node+0x1f1/0x450 [ 1360.548771]     nf_tables_newset+0x10c7/0x1b50 [nf_tables] [ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink] [     1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink] [ 1360.548927] netlink_unicast+0x367/0x4f0 [     1360.548935] netlink_sendmsg+0x34b/0x610 [ 1360.548944] ____sys_sendmsg+0x4d4/0x510 [ 1360.548953]
    ___sys_sendmsg+0xc9/0x120 [ 1360.548961] __sys_sendmsg+0xbe/0x140 [ 1360.548971] do_syscall_64+0x55/0x120     [ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d [ 1360.548994] Freed by task 192222: [     1360.548999] kasan_save_stack+0x20/0x40 [ 1360.549009] kasan_save_track+0x14/0x30 [ 1360.549019]     kasan_save_free_info+0x3b/0x60 [ 1360.549028] poison_slab_object+0x100/0x180 [ 1360.549036]
    __kasan_slab_free+0x14/0x30 [ 1360.549042] kfree+0xb6/0x260 [ 1360.549049] __nft_release_table+0x473/0x6a0     [nf_tables] [ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables] [ 1360.549221]     ops_exit_list+0x50/0xa0 [ 1360.549229] free_exit_list+0x101/0x140 [ 1360.549236]     unregister_pernet_operations+0x107/0x160 [ 1360.549245] unregister_pernet_subsys+0x1c/0x30 [ 1360.549254]     nf_tables_module_exit+0x43/0x80 [nf_tables] [ 1360.549345] __do_sys_delete_module+0x253/0x370 [     1360.549352] do_syscall_64+0x55/0x120 [ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d (gdb) list
    *__nft_release_table+0x473 0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354). 11349     list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) { 11350 list_del(&flowtable->list);
    11351 nft_use_dec(&table->use); 11352 nf_tables_flowtable_destroy(flowtable); 11353 } 11354     list_for_each_entry_safe(set, ns, &table->sets, list) { 11355 list_del(&set->list); 11356     nft_use_dec(&table->use); 11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT)) 11358 nft_map_deactivat
    ---truncated--- (CVE-2024-35899)

  - In the Linux kernel, the following vulnerability has been resolved: drm/client: Fully protect modes[] with     dev->mode_config.mutex The modes[] array contains pointers to modes on the connectors' mode lists, which     are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time     we use it the elements may already be pointing to freed/reused memory. (CVE-2024-35950)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2023-2026-3183 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 (CVE-2026-89637)

    In the Linux kernel, the following vulnerability has been resolved:

    ceph: bound copied dentry name length in NFS export get_name

    ceph_get_name() copies the MDS-supplied name into the caller'sNAME_MAX-sized buffer with memcpy(name,     rinfo->dname, rinfo->dname_len)and then writes name[rinfo->dname_len] = 0, without checking     dname_lenagainst NAME_MAX. A malicious or buggy MDS that returns a LOOKUPNAME replywith dname_len >     NAME_MAX overflows the buffer. __get_snap_name() copiesrde->name / rde->name_len the same unchecked way.

    Impact: a malicious or compromised Ceph MDS overflows the NAME_MAX namebuffer in a client's NFS-export     get_name path, a slab out-of-bounds writereported by KASAN. Reachable when a CephFS mount is re-exported     over NFS.

    Add ceph_export_copy_name(), which rejects lengths above NAME_MAX with-ENAMETOOLONG before the copy, and     use it in both ceph_get_name() and__get_snap_name(). (CVE-2026-89652)

    In the Linux kernel, the following vulnerability has been resolved:

    bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max (CVE-2026-93125)

    In the Linux kernel, the following vulnerability has been resolved:

    ipv6: sr: restore network header before routing and forwarding (CVE-2026-98096)

    In the Linux kernel, the following vulnerability has been resolved:

    writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes (CVE-2026-98538)

    In the Linux kernel, the following vulnerability has been resolved:

    nitro_enclaves: fix use-after-free on SLOT_ALLOC failure (CVE-2026-98775)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - smb: client: fix UAF and buffer leak in cifs_check_trans2() for malformed secondary T2 When a valid     primary TRANSACT2 response has been received (mid->resp_buf set, mid->multiRsp true) and a subsequent     secondary response causes cifs_check_trans2() to return false -- either because the SMB header is invalid     (malformed != 0) or because check2ndT2() rejects the PDU -- handle_mid() overwrites mid->resp_buf with the     new buffer (leaking the primary buffer) and, because mid->multiRsp is set, skips the     server->smallbuf/bigbuf NULL-out. When the user thread frees mid->resp_buf, server->smallbuf or     server->bigbuf is left dangling; the demux thread reuses it for the next packet, resulting in a use-after-     free. Combine both early-exit conditions and, when mid->multiRsp is already set, abort the pending     transaction inline: set multiEnd, call dequeue_mid() with malformed=true, and return true so handle_mid()     exits without touching mid->resp_buf or the server buffer pointers. (CVE-2026-89637)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
373123	Unity Linux 20.1050a Security Update: kernel (UTSA-2026-146705)	Nessus	Unity Linux Local Security Checks	Local	critical
371988	CentOS Linux 8.5 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.5:CLSA-2026:1792979985)	Nessus	CentOS Local Security Checks	Local	high
371225	CentOS Linux 8.4 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.4:CLSA-2026:1792749577)	Nessus	CentOS Local Security Checks	Local	high
369491	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792445930)	Nessus	Rocky Linux Local Security Checks	Local	high
369490	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792445930)	Nessus	Alma Linux Local Security Checks	Local	high
369489	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1792234299)	Nessus	CentOS Local Security Checks	Local	high
366778	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792243434)	Nessus	Alma Linux Local Security Checks	Local	medium
366741	Amazon Linux 2 : kernel (ALASKERNEL-5.10-2026-135)	Nessus	Amazon Linux Local Security Checks	Local	medium
365283	Amazon Linux 2023 : bpftool6.18, kernel6.18, kernel6.18-devel (ALAS2023-2026-3187)	Nessus	Amazon Linux Local Security Checks	Local	medium
365240	Amazon Linux 2023 : bpftool, kernel, kernel-devel (ALAS2023-2026-3183)	Nessus	Amazon Linux Local Security Checks	Local	critical
365209	Amazon Linux 2023 : bpftool6.12, kernel6.12, kernel6.12-devel (ALAS2023-2026-3193)	Nessus	Amazon Linux Local Security Checks	Local	medium
345354	Linux Distros Unpatched Vulnerability : CVE-2026-89637	Nessus	Misc.	Local	critical

Detections

Analytics

CVE-2026-89637

critical

Tenable Plugins

critical

high

high

high

high

high

medium

medium

medium

critical

medium

critical