In the Linux kernel, the following vulnerability has been resolved: enic: fix tx_hang_reset use-after-free on device removal enic_remove() cancels the reset and change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-schedule these work items in the window between the cancel and unregister_netdev(). Use disable_work_sync(), which cancels the work and blocks any subsequent schedule_work() from requeuing it, and apply it to the reset and change_mtu_work items as well so the same requeue race is closed for all teardown work.

The remote Ubuntu 24.04 LTS host has a package installed that is affected by multiple vulnerabilities as referenced in the USN-8886-1 advisory.

    Several security issues were discovered in the Linux kernel. An attacker could possibly use these to     compromise the system. This update corrects flaws in the following subsystems:

    - NVDIMM (Non-Volatile Memory Device) drivers;

    - Handshake API;

    - ARM32 architecture;

    - ARM64 architecture;

    - MIPS architecture;

    - OpenRISC architecture;

    - PowerPC architecture;

    - S390 architecture;

    - x86 architecture;

    - Block layer subsystem;

    - Cryptographic API;

    - Intel NPU Driver;

    - Android drivers;

    - Rados block device (RBD) driver;

    - Bluetooth drivers;

    - Hardware random number generator core;

    - TPM device driver;

    - CPU frequency scaling framework;

    - Hardware crypto device drivers;

    - DMA engine subsystem;

    - FireWire subsystem;

    - Arm Firmware Framework for ARMv8-A(FFA);

    - GPIO subsystem;

    - GPU drivers;

    - HID subsystem;

    - Hardware monitoring drivers;

    - CoreSight HW tracing drivers;

    - I2C subsystem;

    - IIO ADC drivers;

    - IIO subsystem;

    - InfiniBand drivers;

    - Input Device core drivers;

    - Input Device (Mouse) drivers;

    - IOMMU subsystem;

    - Multiple devices driver;

    - Media drivers;

    - Multifunction device drivers;

    - Fastrpc Driver;

    - Amazon Nitro Secure Module driver;

    - MMC subsystem;

    - MTD block device drivers;

    - Ethernet bonding driver;

    - Network drivers;

    - Mellanox network drivers;

    - Texas Instruments network drivers;

    - NTB driver;

    - NVME drivers;

    - NVMEM (Non Volatile Memory) drivers;

    - Parport drivers;

    - Pin controllers subsystem;

    - x86 platform drivers;

    - i.MX PM domains;

    - System reset/shutdown drivers;

    - PTP clock framework;

    - Voltage and Current Regulator drivers;

    - S/390 drivers;

    - SCSI subsystem;

    - SPI subsystem;

    - Realtek RTL8723BS SDIO drivers;

    - VME bus staging drivers;

    - Thermal drivers;

    - Thunderbolt and USB4 drivers;

    - TTY drivers;

    - DesignWare USB2 driver;

    - USB Gadget drivers;

    - USB Host Controller drivers;

    - USB Dual Role (OTG-ready) Controller drivers;

    - USB Serial drivers;

    - USB Type-C Port Controller Manager driver;

    - vDPA drivers;

    - Virtio Host (VHOST) subsystem;

    - Framebuffer layer;

    - Watchdog drivers;

    - 9P distributed file system;

    - AFS file system;

    - File systems infrastructure;

    - BTRFS file system;

    - Ceph distributed file system;

    - EROFS file system;

    - exFAT file system;

    - F2FS file system;

    - FUSE (File system in Userspace);

    - Journaling layer for block devices (JBD2);

    - Network file system (NFS) client;

    - Network file system (NFS) server daemon;

    - NTFS3 file system;

    - OCFS2 file system;

    - Proc file system;

    - SMB network file system;

    - Tracing file system;

    - UDF file system;

    - XFS file system;

    - Key management;

    - BPF subsystem;

    - Control group (cgroup);

    - Glob pattern matching library;

    - MAC80211 subsystem;

    - Mellanox drivers;

    - Networking core;

    - Network sockets;

    - IPv6 networking;

    - Bluetooth subsystem;

    - Wireless networking;

    - IPv4 networking;

    - Netfilter;

    - Network traffic control;

    - SCTP protocol;

    - TCP network protocol;

    - XFRM subsystem;

    - RDMA verbs API;

    - io_uring subsystem;

    - IPC subsystem;

    - Audit subsystem;

    - Kernel CPU control infrastructure;

    - Perf events;

    - Kernel exit() syscall;

    - Kernel fork() syscall;

    - Scheduler infrastructure;

    - Signal handling mechanism;

    - Timer subsystem;

    - Tracing infrastructure;

    - Resizable hashtable library;

    - Memory management;

    - 6LoWPAN network protocol;

    - Asynchronous Transfer Mode (ATM) subsystem;

    - B.A.T.M.A.N. meshing protocol;

    - Ethernet bridge;

    - CAN network layer;

    - Ceph Core library;

    - Ethtool driver;

    - HSR network protocol;

    - IEEE802154.4 network protocol;

    - IUCV driver;

    - KCM (Kernel Connection Multiplexor) sockets driver;

    - IEEE 802.15.4 subsystem;

    - Multipath TCP;

    - Open vSwitch;

    - Packet sockets;

    - Phonet protocol;

    - Qualcomm IPC Router (QRTR);

    - RDS protocol;

    - RxRPC session sockets;

    - SMC sockets;

    - Sun RPC protocol;

    - TIPC protocol;

    - TLS protocol;

    - Unix domain sockets;

    - VMware vSockets driver;

    - X.25 network layer;

    - eXpress Data Path;

    - AppArmor security module;

    - Integrity Measurement Architecture(IMA) framework;

    - SELinux security module;

    - ALSA framework;

    - HD-audio driver;

    - QCOM ASoC drivers;

    - Simple audio multiplexer codec driver;

    - Texas InstrumentS Audio (ASoC/HDA) drivers;

    - SoC Audio for Freescale CPUs drivers;

    - Amlogic Meson SoC drivers;

    - SOF drivers;

    - NVIDIA Tegra ASoC drivers;

    - USB sound devices;

    - Perf tools;

    - KVM subsystem; (CVE-2025-37807, CVE-2026-23265, CVE-2026-43022, CVE-2026-46321, CVE-2026-46322,     CVE-2026-52917, CVE-2026-52923, CVE-2026-52927, CVE-2026-52929, CVE-2026-52935, CVE-2026-52942,     CVE-2026-52943, CVE-2026-52947, CVE-2026-52994, CVE-2026-53136, CVE-2026-53137, CVE-2026-53138,     CVE-2026-53143, CVE-2026-53146, CVE-2026-53147, CVE-2026-53149, CVE-2026-53156, CVE-2026-53157,     CVE-2026-53160, CVE-2026-53161, CVE-2026-53184, CVE-2026-53189, CVE-2026-53194, CVE-2026-53195,     CVE-2026-53199, CVE-2026-53202, CVE-2026-53205, CVE-2026-53209, CVE-2026-53223, CVE-2026-53229,     CVE-2026-53253, CVE-2026-53255, CVE-2026-53267, CVE-2026-53268, CVE-2026-53272, CVE-2026-53329,     CVE-2026-53330, CVE-2026-53356, CVE-2026-53362, CVE-2026-53365, CVE-2026-53366, CVE-2026-53381,     CVE-2026-53383, CVE-2026-53387, CVE-2026-53388, CVE-2026-53389, CVE-2026-53390, CVE-2026-53391,     CVE-2026-53392, CVE-2026-53397, CVE-2026-53400, CVE-2026-53401, CVE-2026-53402, CVE-2026-63794,     CVE-2026-63802, CVE-2026-63803, CVE-2026-63805, CVE-2026-63806, CVE-2026-63809, CVE-2026-63812,     CVE-2026-63814, CVE-2026-63816, CVE-2026-63817, CVE-2026-63819, CVE-2026-63823, CVE-2026-63824,     CVE-2026-63827, CVE-2026-63833, CVE-2026-63867, CVE-2026-63869, CVE-2026-63870, CVE-2026-63875,     CVE-2026-63879, CVE-2026-63881, CVE-2026-63884, CVE-2026-63889, CVE-2026-63909, CVE-2026-63913,     CVE-2026-63920, CVE-2026-63925, CVE-2026-63927, CVE-2026-63930, CVE-2026-63942, CVE-2026-63954,     CVE-2026-63968, CVE-2026-63970, CVE-2026-63971, CVE-2026-63985, CVE-2026-64002, CVE-2026-64003,     CVE-2026-64004, CVE-2026-64005, CVE-2026-64009, CVE-2026-64017, CVE-2026-64023, CVE-2026-64026,     CVE-2026-64036, CVE-2026-64095, CVE-2026-64123, CVE-2026-64188, CVE-2026-64189, CVE-2026-64210,     CVE-2026-64222, CVE-2026-64239, CVE-2026-64242, CVE-2026-64243, CVE-2026-64245, CVE-2026-64246,     CVE-2026-64266, CVE-2026-64270, CVE-2026-64271, CVE-2026-64272, CVE-2026-64273, CVE-2026-64274,     CVE-2026-64276, CVE-2026-64277, CVE-2026-64279, CVE-2026-64283, CVE-2026-64286, CVE-2026-64287,     CVE-2026-64296, CVE-2026-64298, CVE-2026-64299, CVE-2026-64304, CVE-2026-64312, CVE-2026-64317,     CVE-2026-64318, CVE-2026-64322, CVE-2026-64323, CVE-2026-64324, CVE-2026-64333, CVE-2026-64368,     CVE-2026-64372, CVE-2026-64374, CVE-2026-64375, CVE-2026-64378, CVE-2026-64379, CVE-2026-64380,     CVE-2026-64388, CVE-2026-64389, CVE-2026-64395, CVE-2026-64398, CVE-2026-64401, CVE-2026-64402,     CVE-2026-64403, CVE-2026-64411, CVE-2026-64412, CVE-2026-64413, CVE-2026-64418, CVE-2026-64420,     CVE-2026-64422, CVE-2026-64423, CVE-2026-64430, CVE-2026-64432, CVE-2026-64435, CVE-2026-64436,     CVE-2026-64440, CVE-2026-64442, CVE-2026-64443, CVE-2026-64444, CVE-2026-64448, CVE-2026-64449,     CVE-2026-64452, CVE-2026-64456, CVE-2026-64463, CVE-2026-64468, CVE-2026-64469, CVE-2026-64481,     CVE-2026-64496, CVE-2026-64524, CVE-2026-64532, CVE-2026-64533, CVE-2026-64536, CVE-2026-64539,     CVE-2026-64540, CVE-2026-64543, CVE-2026-64545, CVE-2026-64546, CVE-2026-64547, CVE-2026-64550,     CVE-2026-64556, CVE-2026-64560, CVE-2026-64563, CVE-2026-64567, CVE-2026-64568, CVE-2026-64570,     CVE-2026-64574, CVE-2026-64576, CVE-2026-64577, CVE-2026-64578, CVE-2026-64580, CVE-2026-64581,     CVE-2026-64582, CVE-2026-64583, CVE-2026-64584, CVE-2026-64585, CVE-2026-64599, CVE-2026-64600,     CVE-2026-68091, CVE-2026-68096, CVE-2026-68097, CVE-2026-68098, CVE-2026-68100, CVE-2026-68104,     CVE-2026-68106, CVE-2026-68107, CVE-2026-68108, CVE-2026-68116, CVE-2026-68118, CVE-2026-68119,     CVE-2026-68121, CVE-2026-68125, CVE-2026-68129, CVE-2026-68131, CVE-2026-68140, CVE-2026-68141,     CVE-2026-68142, CVE-2026-68143, CVE-2026-68145, CVE-2026-68148, CVE-2026-68149, CVE-2026-68153,     CVE-2026-68155, CVE-2026-68157, CVE-2026-68178, CVE-2026-68179, CVE-2026-68189, CVE-2026-68192,     CVE-2026-68196, CVE-2026-68199, CVE-2026-68202, CVE-2026-68204, CVE-2026-68216, CVE-2026-68219,     CVE-2026-68222, CVE-2026-68236, CVE-2026-68245, CVE-2026-68253, CVE-2026-68255, CVE-2026-68258,     CVE-2026-68260, CVE-2026-68262, CVE-2026-68263, CVE-2026-68266, CVE-2026-68273, CVE-2026-68284,     CVE-2026-68287, CVE-2026-68290, CVE-2026-68293, CVE-2026-68294, CVE-2026-68297, CVE-2026-68299,     CVE-2026-68314, CVE-2026-68315, CVE-2026-68320, CVE-2026-68322, CVE-2026-68323, CVE-2026-68326,     CVE-2026-68329, CVE-2026-68335, CVE-2026-68338, CVE-2026-68340, CVE-2026-68348, CVE-2026-68352,     CVE-2026-68353, CVE-2026-68354, CVE-2026-68370, CVE-2026-68371, CVE-2026-68373, CVE-2026-68376,     CVE-2026-68377, CVE-2026-68383, CVE-2026-68389, CVE-2026-68391, CVE-2026-68392, CVE-2026-68397,     CVE-2026-68398, CVE-2026-68399, CVE-2026-68400, CVE-2026-68401, CVE-2026-68402, CVE-2026-68404,     CVE-2026-68408, CVE-2026-68409, CVE-2026-68414, CVE-2026-68417, CVE-2026-68419, CVE-2026-68425,     CVE-2026-68432, CVE-2026-68433, CVE-2026-68442, CVE-2026-68445, CVE-2026-68446, CVE-2026-68447,     CVE-2026-68451, CVE-2026-68452, CVE-2026-68453, CVE-2026-68454, CVE-2026-68466, CVE-2026-68467,     CVE-2026-68471, CVE-2026-68474, CVE-2026-68479, CVE-2026-72005, CVE-2026-72009, CVE-2026-72012,     CVE-2026-72019, CVE-2026-72021, CVE-2026-72024, CVE-2026-72029, CVE-2026-72035, CVE-2026-72036,     CVE-2026-72045, CVE-2026-72049, CVE-2026-72051, CVE-2026-72052, CVE-2026-72053, CVE-2026-72054,     CVE-2026-72055, CVE-2026-72057, CVE-2026-72061, CVE-2026-72066, CVE-2026-72067, CVE-2026-72072,     CVE-2026-72089, CVE-2026-72099, CVE-2026-72102, CVE-2026-72105, CVE-2026-72107, CVE-2026-72108,     CVE-2026-72109, CVE-2026-72110, CVE-2026-72113, CVE-2026-72114, CVE-2026-72115, CVE-2026-72116,     CVE-2026-72117, CVE-2026-72118, CVE-2026-72119, CVE-2026-72120, CVE-2026-72121, CVE-2026-72122,     CVE-2026-72123, CVE-2026-72133, CVE-2026-72135, CVE-2026-72136, CVE-2026-72144, CVE-2026-72146,     CVE-2026-72148, CVE-2026-72149, CVE-2026-72157, CVE-2026-72160, CVE-2026-72162, CVE-2026-72164,     CVE-2026-72165, CVE-2026-72170, CVE-2026-72171, CVE-2026-72172, CVE-2026-72175, CVE-2026-72181,     CVE-2026-72195, CVE-2026-72196, CVE-2026-72197, CVE-2026-72213, CVE-2026-72225, CVE-2026-72227,     CVE-2026-72231, CVE-2026-72232, CVE-2026-72233, CVE-2026-72235, CVE-2026-72242, CVE-2026-72243,     CVE-2026-72244, CVE-2026-72247, CVE-2026-72250, CVE-2026-72252, CVE-2026-72253, CVE-2026-72254,     CVE-2026-72261, CVE-2026-72262, CVE-2026-72282, CVE-2026-72284, CVE-2026-72297, CVE-2026-72298,     CVE-2026-72301, CVE-2026-72302, CVE-2026-72304, CVE-2026-72310, CVE-2026-72312, CVE-2026-72314,     CVE-2026-72330, CVE-2026-72334, CVE-2026-72335, CVE-2026-72338, CVE-2026-72340, CVE-2026-72342,     CVE-2026-72343, CVE-2026-72347, CVE-2026-72350, CVE-2026-72352, CVE-2026-72369, CVE-2026-72371,     CVE-2026-72373, CVE-2026-72374, CVE-2026-72375, CVE-2026-72378, CVE-2026-72382, CVE-2026-72389,     CVE-2026-72390, CVE-2026-72397, CVE-2026-72400, CVE-2026-72404, CVE-2026-72405, CVE-2026-72406,     CVE-2026-72409, CVE-2026-72410, CVE-2026-72416, CVE-2026-72418, CVE-2026-72419, CVE-2026-72420,     CVE-2026-72423, CVE-2026-72425, CVE-2026-72427, CVE-2026-72435, CVE-2026-72438, CVE-2026-72440,     CVE-2026-72444, CVE-2026-72449, CVE-2026-72450, CVE-2026-72459, CVE-2026-72460, CVE-2026-72464,     CVE-2026-72469, CVE-2026-72470, CVE-2026-72476, CVE-2026-72478, CVE-2026-72480, CVE-2026-72483,     CVE-2026-72485, CVE-2026-72492, CVE-2026-72502, CVE-2026-74256, CVE-2026-74257, CVE-2026-74258,     CVE-2026-74262, CVE-2026-74270, CVE-2026-74281, CVE-2026-74282, CVE-2026-74283, CVE-2026-74288,     CVE-2026-74289, CVE-2026-74292, CVE-2026-74293, CVE-2026-74294, CVE-2026-74295, CVE-2026-74296,     CVE-2026-74297, CVE-2026-74300, CVE-2026-74312, CVE-2026-74313, CVE-2026-74314, CVE-2026-74317,     CVE-2026-74321, CVE-2026-74330, CVE-2026-74334, CVE-2026-74338, CVE-2026-74340, CVE-2026-74341,     CVE-2026-74344, CVE-2026-74347, CVE-2026-74349, CVE-2026-74356, CVE-2026-74359, CVE-2026-74363,     CVE-2026-74365, CVE-2026-74374, CVE-2026-74375, CVE-2026-74377, CVE-2026-74378, CVE-2026-74380,     CVE-2026-74385, CVE-2026-74387, CVE-2026-74388, CVE-2026-74390, CVE-2026-74397, CVE-2026-74438,     CVE-2026-74443, CVE-2026-74444, CVE-2026-74446, CVE-2026-74450, CVE-2026-74453, CVE-2026-74454,     CVE-2026-74456, CVE-2026-74461, CVE-2026-74465, CVE-2026-74467, CVE-2026-74469, CVE-2026-74470,     CVE-2026-74471, CVE-2026-74479, CVE-2026-74481, CVE-2026-74482, CVE-2026-74485, CVE-2026-74488,     CVE-2026-74490, CVE-2026-74492, CVE-2026-74496, CVE-2026-74497, CVE-2026-74507, CVE-2026-74508,     CVE-2026-74509, CVE-2026-74510, CVE-2026-74512, CVE-2026-74515, CVE-2026-74516, CVE-2026-74518,     CVE-2026-74519, CVE-2026-74522, CVE-2026-74523, CVE-2026-74527, CVE-2026-74530, CVE-2026-74531,     CVE-2026-74533, CVE-2026-74534, CVE-2026-74535, CVE-2026-74536, CVE-2026-74537, CVE-2026-74540,     CVE-2026-74544, CVE-2026-74548, CVE-2026-74549, CVE-2026-74550, CVE-2026-74551, CVE-2026-74557,     CVE-2026-74563, CVE-2026-74564, CVE-2026-74565, CVE-2026-74567, CVE-2026-74572, CVE-2026-74574,     CVE-2026-74575, CVE-2026-74578, CVE-2026-74579, CVE-2026-74580, CVE-2026-74581, CVE-2026-74582,     CVE-2026-74583, CVE-2026-74584, CVE-2026-74586, CVE-2026-74587, CVE-2026-74588, CVE-2026-74589,     CVE-2026-74590, CVE-2026-74592, CVE-2026-74594, CVE-2026-74595, CVE-2026-74597, CVE-2026-74598,     CVE-2026-74601, CVE-2026-74603, CVE-2026-74604, CVE-2026-74605, CVE-2026-74606, CVE-2026-74607,     CVE-2026-74608, CVE-2026-74609, CVE-2026-74610, CVE-2026-74611, CVE-2026-74612, CVE-2026-74613,     CVE-2026-74614, CVE-2026-74615, CVE-2026-74616, CVE-2026-74621, CVE-2026-74624, CVE-2026-74625,     CVE-2026-74626, CVE-2026-74628, CVE-2026-74630, CVE-2026-74631, CVE-2026-74632, CVE-2026-74634,     CVE-2026-74635, CVE-2026-74637, CVE-2026-74641, CVE-2026-74646, CVE-2026-74647, CVE-2026-74648,     CVE-2026-74649, CVE-2026-74651, CVE-2026-74656, CVE-2026-74660, CVE-2026-74661, CVE-2026-74662,     CVE-2026-74663, CVE-2026-74666, CVE-2026-74667, CVE-2026-74668, CVE-2026-74669, CVE-2026-74670,     CVE-2026-74675, CVE-2026-74678, CVE-2026-74684, CVE-2026-74687, CVE-2026-74688, CVE-2026-74689,     CVE-2026-74690, CVE-2026-74691, CVE-2026-74692, CVE-2026-74695, CVE-2026-74696, CVE-2026-74697,     CVE-2026-74700, CVE-2026-74701, CVE-2026-74704, CVE-2026-74705, CVE-2026-74710, CVE-2026-74711,     CVE-2026-74713, CVE-2026-74714, CVE-2026-74715, CVE-2026-74717, CVE-2026-74720, CVE-2026-74723,     CVE-2026-74724, CVE-2026-74725, CVE-2026-74726, CVE-2026-74730, CVE-2026-74733, CVE-2026-74736,     CVE-2026-74737, CVE-2026-74739, CVE-2026-74743, CVE-2026-74744, CVE-2026-74746, CVE-2026-74747,     CVE-2026-74748, CVE-2026-74752, CVE-2026-80521, CVE-2026-80526, CVE-2026-80527, CVE-2026-80528,     CVE-2026-80536, CVE-2026-80540, CVE-2026-80541, CVE-2026-80547, CVE-2026-80548, CVE-2026-80549,     CVE-2026-80550, CVE-2026-80551, CVE-2026-80552, CVE-2026-80553, CVE-2026-80554, CVE-2026-80555,     CVE-2026-80556, CVE-2026-80557, CVE-2026-80558, CVE-2026-80559, CVE-2026-80560, CVE-2026-80561,     CVE-2026-80565, CVE-2026-80568, CVE-2026-80569, CVE-2026-80570, CVE-2026-80572, CVE-2026-80574,     CVE-2026-80576, CVE-2026-80578, CVE-2026-80579, CVE-2026-80580, CVE-2026-80583, CVE-2026-80584,     CVE-2026-80585, CVE-2026-80586, CVE-2026-80587, CVE-2026-80589, CVE-2026-80721, CVE-2026-80901,     CVE-2026-97509)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.5 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.5:CLSA-2026:1791852988 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: idle: Check     acpi_fetch_acpi_dev() return value The return value of acpi_fetch_acpi_dev() could be NULL, which would     cause a NULL pointer dereference to occur in acpi_device_hid(). [ rjw: Subject and changelog edits, added     empty line after if () ] (CVE-2022-50327)

  - In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in     ext4_write_info I caught a null-ptr-deref bug as follows:
    ================================================================== KASAN: null-ptr-deref in range     [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339     RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0     ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0     generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130     deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0     exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70     entry_SYSCALL_64_after_hwframe+0x44/0xa9     ================================================================== Above issue may happen as follows:
    ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt     deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount     dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem     sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info     ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null     pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being     used. (CVE-2022-50344)

  - In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix null-ptr-deref in     vkms_release() A null-ptr-deref is triggered when it tries to destroy the workqueue in     vkms->output.composer_workq in vkms_release(). KASAN: null-ptr-deref in range     [0x0000000000000118-0x000000000000011f] CPU: 5 PID: 17193 Comm: modprobe Not tainted     6.0.0-11331-gd465bff130bf #24 RIP: 0010:destroy_workqueue+0x2f/0x710 ... Call Trace: <TASK> ?     vkms_config_debugfs_init+0x50/0x50 [vkms] __devm_drm_dev_alloc+0x15a/0x1c0 [drm] vkms_init+0x245/0x1000     [vkms] do_one_initcall+0xd0/0x4f0 do_init_module+0x1a4/0x680 load_module+0x6249/0x7110
    __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The     reason is that an OOM happened which triggers the destroy of the workqueue, however, the workqueue is     alloced in the later process, thus a null-ptr-deref happened. A simple call graph is shown as below:
    vkms_init() vkms_create() devm_drm_dev_alloc() __devm_drm_dev_alloc() devm_drm_dev_init()     devm_add_action_or_reset() devm_add_action() # an error happened devm_drm_dev_init_release() drm_dev_put()     kref_put() drm_dev_release() vkms_release() destroy_workqueue() # null-ptr-deref happened     vkms_modeset_init() vkms_output_init() vkms_crtc_init() # where the workqueue get allocated Fix this by     checking if composer_workq is NULL before passing it to the destroy_workqueue() in vkms_release().
    (CVE-2022-50369)

  - In the Linux kernel, the following vulnerability has been resolved: nfsd: under NFSv4.1, fix double     svc_xprt_put on rpc_create failure On error situation `clp->cl_cb_conn.cb_xprt` should not be given a     reference to the xprt otherwise both client cleanup and the error handling path of the caller call to put     it. Better to delay handing over the reference to a later branch. [ 72.530665] refcount_t: underflow; use-     after-free. [ 72.531933] WARNING: CPU: 0 PID: 173 at lib/refcount.c:28 refcount_warn_saturate+0xcf/0x120 [     72.533075] Modules linked in: nfsd(OE) nfsv4(OE) nfsv3(OE) nfs(OE) lockd(OE) compat_nfs_ssc(OE)     nfs_acl(OE) rpcsec_gss_krb5(OE) auth_rpcgss(OE) rpcrdma(OE) dns_resolver fscache netfs grace rdma_cm iw_cm     ib_cm sunrpc(OE) mlx5_ib mlx5_core mlxfw pci_hyperv_intf ib_uverbs ib_core xt_MASQUERADE     nf_conntrack_netlink nft_counter xt_addrtype nft_compat br_netfilter bridge stp llc nft_reject_inet     nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6     nf_defrag_ipv4 ip_set overlay nf_tables nfnetlink crct10dif_pclmul crc32_pclmul ghash_clmulni_intel xfs     serio_raw virtio_net virtio_blk net_failover failover fuse [last unloaded: sunrpc] [ 72.540389] CPU: 0     PID: 173 Comm: kworker/u16:5 Tainted: G OE 5.15.82-dan #1 [ 72.541511] Hardware name: Red Hat KVM/RHEL-AV,     BIOS 1.16.0-3.module+el8.7.0+1084+97b81f61 04/01/2014 [ 72.542717] Workqueue: nfsd4_callbacks     nfsd4_run_cb_work [nfsd] [ 72.543575] RIP: 0010:refcount_warn_saturate+0xcf/0x120 [ 72.544299] Code: 55 00     0f 0b 5d e9 01 50 98 00 80 3d 75 9e 39 08 00 0f 85 74 ff ff ff 48 c7 c7 e8 d1 60 8e c6 05 61 9e 39 08 01     e8 f6 51 55 00 <0f> 0b 5d e9 d9 4f 98 00 80 3d 4b 9e 39 08 00 0f 85 4c ff ff ff 48 [ 72.546666] RSP:
    0018:ffffb3f841157cf0 EFLAGS: 00010286 [ 72.547393] RAX: 0000000000000026 RBX: ffff89ac6231d478 RCX:
    0000000000000000 [ 72.548324] RDX: ffff89adb7c2c2c0 RSI: ffff89adb7c205c0 RDI: ffff89adb7c205c0 [     72.549271] RBP: ffffb3f841157cf0 R08: 0000000000000000 R09: c0000000ffefffff [ 72.550209] R10:
    0000000000000001 R11: ffffb3f841157ad0 R12: ffff89ac6231d180 [ 72.551142] R13: ffff89ac6231d478 R14:
    ffff89ac40c06180 R15: ffff89ac6231d4b0 [ 72.552089] FS: 0000000000000000(0000) GS:ffff89adb7c00000(0000)     knlGS:0000000000000000 [ 72.553175] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 72.553934] CR2:
    0000563a310506a8 CR3: 0000000109a66000 CR4: 0000000000350ef0 [ 72.554874] Call Trace: [ 72.555278] <TASK>     [ 72.555614] svc_xprt_put+0xaf/0xe0 [sunrpc] [ 72.556276] nfsd4_process_cb_update.isra.11+0xb7/0x410     [nfsd] [ 72.557087] ? update_load_avg+0x82/0x610 [ 72.557652] ? cpuacct_charge+0x60/0x70 [ 72.558212] ?     dequeue_entity+0xdb/0x3e0 [ 72.558765] ? queued_spin_unlock+0x9/0x20 [ 72.559358]     nfsd4_run_cb_work+0xfc/0x270 [nfsd] [ 72.560031] process_one_work+0x1df/0x390 [ 72.560600]     worker_thread+0x37/0x3b0 [ 72.561644] ? process_one_work+0x390/0x390 [ 72.562247] kthread+0x12f/0x150 [     72.562710] ? set_kthread_struct+0x50/0x50 [ 72.563309] ret_from_fork+0x22/0x30 [ 72.563818] </TASK> [     72.564189] ---[ end trace 031117b1c72ec616 ]--- [ 72.566019] list_add corruption. next->prev should be     prev (ffff89ac4977e538), but was ffff89ac4763e018. (next=ffff89ac4763e018). [ 72.567647] ------------[ cut     here ]------------ (CVE-2022-50401)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Propagate error from     htab_lock_bucket() to userspace In __htab_map_lookup_and_delete_batch() if htab_lock_bucket() returns
    -EBUSY, it will go to next bucket. Going to next bucket may not only skip the elements in current bucket     silently, but also incur out-of-bound memory access or expose kernel memory to userspace if current     bucket_cnt is greater than bucket_size or zero. Fixing it by stopping batch operation and returning -EBUSY     when htab_lock_bucket() fails, and the application can retry or skip the busy batch as needed.
    (CVE-2022-50490)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1791800936 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: kunit: Fix potential null dereference     in kunit_device_driver_test() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL     check may lead to NULL dereference. Add a NULL check for test_state. (CVE-2024-56773)

  - In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET     for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET     call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written     back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The     read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix     this by initializing the temporary value before copying the regset from userspace, as for other regsets     (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing     contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write     NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read     NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d     | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | |     Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr =     0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr =     0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr |     GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to     write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read     NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d     (CVE-2024-57878)

  - In the Linux kernel, the following vulnerability has been resolved: mptcp: fix 'scheduling while atomic'     in mptcp_pm_nl_append_new_local_addr If multiple connection requests attempt to create an implicit mptcp     endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none     found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the     concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes     use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called.
    During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An     example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl     (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug     (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33     kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207     kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84     kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160)     wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116     kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311     kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr     (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id     (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req     (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305)     tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651)     tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv     (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))     ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver     (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)     ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv     (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core     (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685     net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449     include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
    __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs     (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)     irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ>     This problem seems particularly prevalent if the user advertises an endpoint that has a different external     vs internal address. In the case where the external address is advertised and multiple connections already     exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the     first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of     an existing implicit local address if called via mptcp_pm_nl_get_local_id. (CVE-2025-21938)

  - In the Linux kernel, the following vulnerability has been resolved: devlink: fix xa_alloc_cyclic() error     handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will     cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (rel). Fix it by checking     if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.
    (CVE-2025-22017)

  - In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path     of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence     and then return. The code is waiting on m->fence which could be the local fence but this is only stable     under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit     762b7e95362170b3e13a8704f38d5e47eca4ba74) (CVE-2025-37869)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1791800936 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: kunit: Fix potential null dereference     in kunit_device_driver_test() kunit_kzalloc() may return a NULL pointer, dereferencing it without NULL     check may lead to NULL dereference. Add a NULL check for test_state. (CVE-2024-56773)

  - In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET     for NT_ARM_FPMR Currently fpmr_set() doesn't initialize the temporary 'fpmr' variable, and a SETREGSET     call with a length of zero will leave this uninitialized. Consequently an arbitrary value will be written     back to target->thread.uw.fpmr, potentially leaking up to 64 bits of memory from the kernel stack. The     read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. Fix     this by initializing the temporary value before copying the regset from userspace, as for other regsets     (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing     contents of FPMR will be retained. Before this patch: | # ./fpmr-test | Attempting to write     NT_ARM_FPMR::fpmr = 0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read     NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d     | | Attempting to write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | |     Attempting to read NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr =     0xffff800083963d50 After this patch: | # ./fpmr-test | Attempting to write NT_ARM_FPMR::fpmr =     0x900d900d900d900d | SETREGSET(nt=0x40e, len=8) wrote 8 bytes | | Attempting to read NT_ARM_FPMR::fpmr |     GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d | | Attempting to     write NT_ARM_FPMR (zero length) | SETREGSET(nt=0x40e, len=0) wrote 0 bytes | | Attempting to read     NT_ARM_FPMR::fpmr | GETREGSET(nt=0x40e, len=8) read 8 bytes | Read NT_ARM_FPMR::fpmr = 0x900d900d900d900d     (CVE-2024-57878)

  - In the Linux kernel, the following vulnerability has been resolved: mptcp: fix 'scheduling while atomic'     in mptcp_pm_nl_append_new_local_addr If multiple connection requests attempt to create an implicit mptcp     endpoint in parallel, more than one caller may end up in mptcp_pm_nl_append_new_local_addr because none     found the address in local_addr_list during their call to mptcp_pm_nl_get_local_id. In this case, the     concurrent new_local_addr calls may delete the address entry created by the previous caller. These deletes     use synchronize_rcu, but this is not permitted in some of the contexts where this function may be called.
    During packet recv, the caller may be in a rcu read critical section and have preemption disabled. An     example stack: BUG: scheduling while atomic: swapper/2/0/0x00000302 Call Trace: <IRQ> dump_stack_lvl     (lib/dump_stack.c:117 (discriminator 1)) dump_stack (lib/dump_stack.c:124) __schedule_bug     (kernel/sched/core.c:5943) schedule_debug.constprop.0 (arch/x86/include/asm/preempt.h:33     kernel/sched/core.c:5970) __schedule (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:207     kernel/sched/features.h:29 kernel/sched/core.c:6621) schedule (arch/x86/include/asm/preempt.h:84     kernel/sched/core.c:6804 kernel/sched/core.c:6818) schedule_timeout (kernel/time/timer.c:2160)     wait_for_completion (kernel/sched/completion.c:96 kernel/sched/completion.c:116     kernel/sched/completion.c:127 kernel/sched/completion.c:148) __wait_rcu_gp (include/linux/rcupdate.h:311     kernel/rcu/update.c:444) synchronize_rcu (kernel/rcu/tree.c:3609) mptcp_pm_nl_append_new_local_addr     (net/mptcp/pm_netlink.c:966 net/mptcp/pm_netlink.c:1061) mptcp_pm_nl_get_local_id     (net/mptcp/pm_netlink.c:1164) mptcp_pm_get_local_id (net/mptcp/pm.c:420) subflow_check_req     (net/mptcp/subflow.c:98 net/mptcp/subflow.c:213) subflow_v4_route_req (net/mptcp/subflow.c:305)     tcp_conn_request (net/ipv4/tcp_input.c:7216) subflow_v4_conn_request (net/mptcp/subflow.c:651)     tcp_rcv_state_process (net/ipv4/tcp_input.c:6709) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1934) tcp_v4_rcv     (net/ipv4/tcp_ipv4.c:2334) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205 (discriminator 1))     ip_local_deliver_finish (include/linux/rcupdate.h:813 net/ipv4/ip_input.c:234) ip_local_deliver     (include/linux/netfilter.h:314 include/linux/netfilter.h:308 net/ipv4/ip_input.c:254)     ip_sublist_rcv_finish (include/net/dst.h:461 net/ipv4/ip_input.c:580) ip_sublist_rcv     (net/ipv4/ip_input.c:640) ip_list_rcv (net/ipv4/ip_input.c:675) __netif_receive_skb_list_core     (net/core/dev.c:5583 net/core/dev.c:5631) netif_receive_skb_list_internal (net/core/dev.c:5685     net/core/dev.c:5774) napi_complete_done (include/linux/list.h:37 include/net/gro.h:449     include/net/gro.h:444 net/core/dev.c:6114) igb_poll (drivers/net/ethernet/intel/igb/igb_main.c:8244) igb
    __napi_poll (net/core/dev.c:6582) net_rx_action (net/core/dev.c:6653 net/core/dev.c:6787) handle_softirqs     (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:588 kernel/softirq.c:427 kernel/softirq.c:636)     irq_exit_rcu (kernel/softirq.c:651) common_interrupt (arch/x86/kernel/irq.c:247 (discriminator 14)) </IRQ>     This problem seems particularly prevalent if the user advertises an endpoint that has a different external     vs internal address. In the case where the external address is advertised and multiple connections already     exist, multiple subflow SYNs arrive in parallel which tends to trigger the race during creation of the     first local_addr_list entries which have the internal address instead. Fix by skipping the replacement of     an existing implicit local address if called via mptcp_pm_nl_get_local_id. (CVE-2025-21938)

  - In the Linux kernel, the following vulnerability has been resolved: devlink: fix xa_alloc_cyclic() error     handling In case of returning 1 from xa_alloc_cyclic() (wrapping) ERR_PTR(1) will be returned, which will     cause IS_ERR() to be false. Which can lead to dereference not allocated pointer (rel). Fix it by checking     if err is lower than zero. This wasn't found in real usecase, only noticed. Credit to Pierre.
    (CVE-2025-22017)

  - In the Linux kernel, the following vulnerability has been resolved: drm/xe: Use local fence in error path     of xe_migrate_clear The intent of the error path in xe_migrate_clear is to wait on locally generated fence     and then return. The code is waiting on m->fence which could be the local fence but this is only stable     under the job mutex leading to a possible UAF. Fix code to wait on local fence. (cherry picked from commit     762b7e95362170b3e13a8704f38d5e47eca4ba74) (CVE-2025-37869)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS-STREAM8:CLSA-2026:1791780738 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in     shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure     that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs     don't hold their own references to pages that are mirrored over, so failing to notify them can lead to     page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b     (khugepaged: add support of collapse for tmpfs/shmem pages), but most of the security impact of this     only came in commit 27e1f8273113 (khugepaged: enable collapse pmd for pte-mapped THP), which actually     omitted flushes for the removal of present PTEs, not just for the removal of empty page tables.
    (CVE-2022-48991)

  - In the Linux kernel, the following vulnerability has been resolved: virtio_net: fix xdp_rxq_info bug after     suspend/resume The following sequence currently causes a driver bug warning when using virtio_net: # ip     link set eth0 up # echo mem > /sys/power/state (or e.g. # rtcwake -s 10 -m mem) <resume> # ip link set     eth0 down Missing register, driver bug WARNING: CPU: 0 PID: 375 at net/core/xdp.c:138     xdp_rxq_info_unreg+0x58/0x60 Call trace: xdp_rxq_info_unreg+0x58/0x60 virtnet_close+0x58/0xac
    __dev_close_many+0xac/0x140 __dev_change_flags+0xd8/0x210 dev_change_flags+0x24/0x64     do_setlink+0x230/0xdd0 ... This happens because virtnet_freeze() frees the receive_queue completely     (including struct xdp_rxq_info) but does not call xdp_rxq_info_unreg(). Similarly, virtnet_restore() sets     up the receive_queue again but does not call xdp_rxq_info_reg(). Actually, parts of virtnet_freeze_down()     and virtnet_restore_up() are almost identical to virtnet_close() and virtnet_open(): only the calls to     xdp_rxq_info_(un)reg() are missing. This means that we can fix this easily and avoid such problems in the     future by just calling virtnet_close()/open() from the freeze/restore handlers. Aside from adding the     missing xdp_rxq_info calls the only difference is that the refill work is only cancelled if     netif_running(). However, this should not make any functional difference since the refill work should only     be active if the network interface is actually up. (CVE-2022-49687)

  - In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix repeated calls to     sock_put() when msg has more_data In tcp_bpf_send_verdict() redirection, the eval variable is assigned to
    __SK_REDIRECT after the apply_bytes data is sent, if msg has more_data, sock_put() will be called multiple     times. We should reset the eval variable to __SK_NONE every time more_data starts. This causes: IPv4:
    Attempt to release TCP socket in state 1 00000000b4c925d7 ------------[ cut here ]------------ refcount_t:
    addition on 0; use-after-free. WARNING: CPU: 5 PID: 4482 at lib/refcount.c:25     refcount_warn_saturate+0x7d/0x110 Modules linked in: CPU: 5 PID: 4482 Comm: sockhash_bypass Kdump: loaded     Not tainted 6.0.0 #1 Hardware name: Red Hat KVM, BIOS 1.11.0-2.el7 04/01/2014 Call Trace: <TASK>
    __tcp_transmit_skb+0xa1b/0xb90 ? __alloc_skb+0x8c/0x1a0 ? __kmalloc_node_track_caller+0x184/0x320     tcp_write_xmit+0x22a/0x1110 __tcp_push_pending_frames+0x32/0xf0 do_tcp_sendpages+0x62d/0x640     tcp_bpf_push+0xae/0x2c0 tcp_bpf_sendmsg_redir+0x260/0x410 ? preempt_count_add+0x70/0xa0     tcp_bpf_send_verdict+0x386/0x4b0 tcp_bpf_sendmsg+0x21b/0x3b0 sock_sendmsg+0x58/0x70
    __sys_sendto+0xfa/0x170 ? xfd_validate_state+0x1d/0x80 ? switch_fpu_return+0x59/0xe0
    __x64_sys_sendto+0x24/0x30 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd     (CVE-2022-50536)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: scomp - fix req->dst buffer     overflow The req->dst buffer size should be checked before copying from the scomp_scratch->dst to avoid     req->dst buffer overflow problem. (CVE-2023-52612)

  - In the Linux kernel, the following vulnerability has been resolved: net: atlantic: eliminate double free     in error handling logic Driver has a logic leak in ring data allocation/free, where aq_ring_free could be     called multiple times on same ring, if system is under stress and got memory allocation error. Ring     pointer was used as an indicator of failure, but this is not correct since only ring data is     allocated/deallocated. Ring itself is an array member. Changing ring allocation functions to return error     code directly. This simplifies error handling and eliminates aq_ring_free on higher layer.
    (CVE-2023-52664)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1789898700 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ceph: fix possible deadlock when     holding Fwb to get inline_data 1, mount with wsync. 2, create a file with O_RDWR, and the request was sent     to mds.0: ceph_atomic_open()--> ceph_mdsc_do_request(openc) finish_open(file, dentry, ceph_open)-->     ceph_open()--> ceph_init_file()--> ceph_init_file_info()--> ceph_uninline_data()--> { ... if     (inline_version == 1 || /* initial version, no data */ inline_version == CEPH_INLINE_NONE) goto     out_unlock; ... } The inline_version will be 1, which is the initial version for the new create file. And     here the ci->i_inline_version will keep with 1, it's buggy. 3, buffer write to the file immediately:
    ceph_write_iter()--> ceph_get_caps(file, need=Fw, want=Fb, ...); generic_perform_write()-->     a_ops->write_begin()--> ceph_write_begin()--> netfs_write_begin()--> netfs_begin_read()-->     netfs_rreq_submit_slice()--> netfs_read_from_server()--> rreq->netfs_ops->issue_read()-->     ceph_netfs_issue_read()--> { ... if (ci->i_inline_version != CEPH_INLINE_NONE &&     ceph_netfs_issue_op_inline(subreq)) return; ... } ceph_put_cap_refs(ci, Fwb); The     ceph_netfs_issue_op_inline() will send a getattr(Fsr) request to mds.1. 4, then the mds.1 will request the     rd lock for CInode::filelock from the auth mds.0, the mds.0 will do the CInode::filelock state transation     from excl --> sync, but it need to revoke the Fxwb caps back from the clients. While the kernel client has     aleady held the Fwb caps and waiting for the getattr(Fsr). It's deadlock! URL:
    https://tracker.ceph.com/issues/55377 (CVE-2022-49296)

  - In the Linux kernel, the following vulnerability has been resolved: tracing: Fix reading strings from     synthetic events The follow commands caused a crash: # cd /sys/kernel/tracing # echo 's:open char file[]'     > dynamic_events # echo 'hist:keys=common_pid:file=filename:onchange($file).trace(open,$file)' >     events/syscalls/sys_enter_openat/trigger' # echo 1 > events/synthetic/open/enable BOOM! The problem is     that the synthetic event field char file[] will read the value given to it as a string without any     memory checks to make sure the address is valid. The above example will pass in the user space address and     the sythetic event code will happily call strlen() on it and then strscpy() where either one will cause an     oops when accessing user space addresses. Use the helper functions from trace_kprobe and trace_eprobe that     can read strings safely (and actually succeed when the address is from user space and the memory is mapped     in). Now the above can show: packagekitd-1721 [000] ...2. 104.597170: open:
    file=/usr/lib/rpm/fileattrs/cmake.attr in:imjournal-978 [006] ...2. 104.599642: open:
    file=/var/lib/rsyslog/imjournal.state.tmp packagekitd-1721 [000] ...2. 104.626308: open:
    file=/usr/lib/rpm/fileattrs/debuginfo.attr (CVE-2022-50255)

  - In the Linux kernel, the following vulnerability has been resolved: hwrng: core - Fix page fault dead lock     on mmap-ed hwrng There is a dead-lock in the hwrng device read path. This triggers when the user reads     from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive     read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user. (CVE-2023-52615)

  - In the Linux kernel, the following vulnerability has been resolved: fscache: Use wait_on_bit() to wait for     the freeing of relinquished volume The freeing of relinquished volume will wake up the pending volume     acquisition by using wake_up_bit(), however it is mismatched with wait_var_event() used in     fscache_wait_on_volume_collision() and it will never wake up the waiter in the wait-queue because these     two functions operate on different wait-queues. According to the implementation in     fscache_wait_on_volume_collision(), if the wake-up of pending acquisition is delayed longer than 20     seconds (e.g., due to the delay of on-demand fd closing), the first wait_var_event_timeout() will timeout     and the following wait_var_event() will hang forever as shown below: FS-Cache: Potential volume collision     new=00000024 old=00000022 ...... INFO: task mount:1148 blocked for more than 122 seconds. Not tainted     6.1.0-rc6+ #1 task:mount state:D stack:0 pid:1148 ppid:1 Call Trace: <TASK> __schedule+0x2f6/0xb80     schedule+0x67/0xe0 fscache_wait_on_volume_collision.cold+0x80/0x82 __fscache_acquire_volume+0x40d/0x4e0     erofs_fscache_register_volume+0x51/0xe0 [erofs] erofs_fscache_register_fs+0x19c/0x240 [erofs]     erofs_fc_fill_super+0x746/0xaf0 [erofs] vfs_get_super+0x7d/0x100 get_tree_nodev+0x16/0x20     erofs_fc_get_tree+0x20/0x30 [erofs] vfs_get_tree+0x24/0xb0 path_mount+0x2fa/0xa90 do_mount+0x7c/0xa0
    __x64_sys_mount+0x8b/0xe0 do_syscall_64+0x30/0x60 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Considering     that wake_up_bit() is more selective, so fix it by using wait_on_bit() instead of wait_var_event() to wait     for the freeing of relinquished volume. In addition because waitqueue_active() is used in wake_up_bit()     and clear_bit() doesn't imply any memory barrier, use clear_and_wake_up_bit() to add the missing memory     barrier between cursor->flags and waitqueue_active(). (CVE-2023-52982)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related     locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that     check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking     locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm ->     iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock     around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the     iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit     241f51931c35 (Bluetooth: ISO: Avoid circular locking dependency), since the we acquire locks in order.
    We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock.
    Similarly for commit 6a5ad251b7cd (Bluetooth: ISO: Fix possible circular locking dependency). We retain     the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return     iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect     timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add     in iso_connect_cis: =============================================================== iso_sock_create:771:
    sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e     70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk     000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e     iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 ->     28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182     conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon     000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn     00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is     BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e,     conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535     hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182     iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk     000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e     iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk     000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434:
    sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket     00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only     iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and     end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD     8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name:
    QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close     (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace     with iso_conn_del before iso_chan_add in iso_connect_cis:
    =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 ->     28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0     orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated--- (CVE-2023-54164)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1789037015 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi: Fix conn use after free     during resets If we haven't done a unbind target call we can race where iscsi_conn_teardown wakes up the     EH thread and then frees the conn while those threads are still accessing the conn ehwait. We can only do     one TMF per session so this just moves the TMF fields from the conn to the session. We can then rely on     the iscsi_session_teardown->iscsi_remove_session->__iscsi_unbind_session call to remove the target and     it's devices, and know after that point there is no device or scsi-ml callout trying to access the     session. (CVE-2021-47328)

  - In the Linux kernel, the following vulnerability has been resolved: ext4: improve error handling from     ext4_dirhash() The ext4_dirhash() will *almost* never fail, especially when the hash tree feature was     first introduced. However, with the addition of support of encrypted, casefolded file names, that function     can most certainly fail today. So make sure the callers of ext4_dirhash() properly check for failures, and     reflect the errors back up to their callers. (CVE-2023-53473)

  - In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before     tearing down context entry When tearing down a context entry, the current implementation zeros the entire     128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a torn     entry  where some fields are already zeroed while the 'Present' bit is still set  leading to     unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may     reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the     hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the     Guidance to Software for Invalidations in the VT-d spec (Section 6.5.3.3) by implementing the     recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal     the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is     visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no     longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is     complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before     the 'Present' bit becomes visible. (CVE-2026-45944)

  - In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive     message requests The driver would just fetch events and receive messages until the BMC said it was done.
    To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition,     an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch     to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck,     it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck.
    This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general     issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver.
    It's not a bug per-se, but it is accounting for bugs in BMCs. (CVE-2026-46177)

  - In the Linux kernel, the following vulnerability has been resolved: PCI: use generic driver_override     infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called     without the device lock held, thus accessing the driver_override field without a lock, which can cause a     UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking     internally. Note that calling match() from __driver_attach() without the device lock held is intentional.
    [1] (CVE-2026-53120)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4788 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4788-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     September 19, 2026                            https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.107-1~deb12u1     CVE ID         : CVE-2025-38525 CVE-2025-40054 CVE-2025-40074 CVE-2026-43197                      CVE-2026-53092 CVE-2026-64017 CVE-2026-64216 CVE-2026-64581                      CVE-2026-64586 CVE-2026-68082 CVE-2026-68118 CVE-2026-68132                      CVE-2026-68138 CVE-2026-68159 CVE-2026-68166 CVE-2026-68169                      CVE-2026-68198 CVE-2026-68253 CVE-2026-68254 CVE-2026-68264                      CVE-2026-68266 CVE-2026-68267 CVE-2026-68273 CVE-2026-68276                      CVE-2026-68322 CVE-2026-68367 CVE-2026-68431 CVE-2026-68451                      CVE-2026-68452 CVE-2026-68480 CVE-2026-72111 CVE-2026-74440                      CVE-2026-74441 CVE-2026-74442 CVE-2026-74443 CVE-2026-74444                      CVE-2026-74445 CVE-2026-74446 CVE-2026-74447 CVE-2026-74448                      CVE-2026-74450 CVE-2026-74451 CVE-2026-74452 CVE-2026-74453                      CVE-2026-74454 CVE-2026-74455 CVE-2026-74456 CVE-2026-74457                      CVE-2026-74458 CVE-2026-74459 CVE-2026-74460 CVE-2026-74461                      CVE-2026-74463 CVE-2026-74464 CVE-2026-74465 CVE-2026-74467                      CVE-2026-74468 CVE-2026-74469 CVE-2026-74470 CVE-2026-74471                      CVE-2026-74472 CVE-2026-74473 CVE-2026-74474 CVE-2026-74475                      CVE-2026-74476 CVE-2026-74478 CVE-2026-74479 CVE-2026-74480                      CVE-2026-74481 CVE-2026-74482 CVE-2026-74483 CVE-2026-74484                      CVE-2026-74485 CVE-2026-74487 CVE-2026-74488 CVE-2026-74490                      CVE-2026-74492 CVE-2026-74493 CVE-2026-74494 CVE-2026-74495                      CVE-2026-74497 CVE-2026-74498 CVE-2026-74499 CVE-2026-74500                      CVE-2026-74501 CVE-2026-74502 CVE-2026-74503 CVE-2026-74504                      CVE-2026-74505 CVE-2026-74507 CVE-2026-74508 CVE-2026-74509                      CVE-2026-74510 CVE-2026-74512 CVE-2026-74514 CVE-2026-74515                      CVE-2026-74516 CVE-2026-74517 CVE-2026-74518 CVE-2026-74519                      CVE-2026-74522 CVE-2026-74523 CVE-2026-74524 CVE-2026-74525                      CVE-2026-74531 CVE-2026-74532 CVE-2026-74535 CVE-2026-74536                      CVE-2026-74540 CVE-2026-74541 CVE-2026-74543 CVE-2026-74545                      CVE-2026-74546 CVE-2026-74547 CVE-2026-74548 CVE-2026-74549                      CVE-2026-74550 CVE-2026-74551 CVE-2026-74552 CVE-2026-74553                      CVE-2026-74555 CVE-2026-74556 CVE-2026-74557 CVE-2026-74563                      CVE-2026-74564 CVE-2026-74565 CVE-2026-74566 CVE-2026-74567                      CVE-2026-74569 CVE-2026-74572 CVE-2026-74574 CVE-2026-74575                      CVE-2026-74576 CVE-2026-74577 CVE-2026-74579 CVE-2026-74580                      CVE-2026-74581 CVE-2026-74582 CVE-2026-74583 CVE-2026-74585                      CVE-2026-74586 CVE-2026-74587 CVE-2026-74588 CVE-2026-74589                      CVE-2026-74590 CVE-2026-74592 CVE-2026-74594 CVE-2026-74595                      CVE-2026-74597 CVE-2026-74598 CVE-2026-74599 CVE-2026-74601                      CVE-2026-74602 CVE-2026-74603 CVE-2026-74604 CVE-2026-74606                      CVE-2026-74607 CVE-2026-74608 CVE-2026-74609 CVE-2026-74610                      CVE-2026-74612 CVE-2026-74613 CVE-2026-74614 CVE-2026-74615                      CVE-2026-74616 CVE-2026-74618 CVE-2026-74619 CVE-2026-74620                      CVE-2026-74621 CVE-2026-74622 CVE-2026-74623 CVE-2026-74624                      CVE-2026-74625 CVE-2026-74626 CVE-2026-74628 CVE-2026-74630                      CVE-2026-74631 CVE-2026-74632 CVE-2026-74634 CVE-2026-74635                      CVE-2026-74636 CVE-2026-74637 CVE-2026-74641 CVE-2026-74644                      CVE-2026-74646 CVE-2026-74647 CVE-2026-74648 CVE-2026-74649                      CVE-2026-74650 CVE-2026-74651 CVE-2026-74653 CVE-2026-74654                      CVE-2026-74655 CVE-2026-74656 CVE-2026-74657 CVE-2026-74658                      CVE-2026-74659 CVE-2026-74660 CVE-2026-74661 CVE-2026-74662                      CVE-2026-74663 CVE-2026-74664 CVE-2026-74665 CVE-2026-74666                      CVE-2026-74667 CVE-2026-74668 CVE-2026-74669 CVE-2026-74670                      CVE-2026-74671 CVE-2026-74672 CVE-2026-74673 CVE-2026-74675                      CVE-2026-74676 CVE-2026-74677 CVE-2026-74678 CVE-2026-74679                      CVE-2026-74680 CVE-2026-74682 CVE-2026-74683 CVE-2026-74684                      CVE-2026-74685 CVE-2026-74688 CVE-2026-74689 CVE-2026-74691                      CVE-2026-74692 CVE-2026-74693 CVE-2026-74694 CVE-2026-74696                      CVE-2026-74700 CVE-2026-74701 CVE-2026-74704 CVE-2026-74705                      CVE-2026-74710 CVE-2026-74712 CVE-2026-74714 CVE-2026-74717                      CVE-2026-74718 CVE-2026-74719 CVE-2026-74720 CVE-2026-74722                      CVE-2026-74724 CVE-2026-74725 CVE-2026-74726 CVE-2026-74730                      CVE-2026-74732 CVE-2026-74736 CVE-2026-74737 CVE-2026-74739                      CVE-2026-74740 CVE-2026-74742 CVE-2026-74743 CVE-2026-74744                      CVE-2026-74746 CVE-2026-74748 CVE-2026-80522 CVE-2026-80525                      CVE-2026-80526 CVE-2026-80527 CVE-2026-80528 CVE-2026-80529                      CVE-2026-80530 CVE-2026-80531 CVE-2026-80532 CVE-2026-80533                      CVE-2026-80534 CVE-2026-80535 CVE-2026-80536 CVE-2026-80539                      CVE-2026-80540 CVE-2026-80541 CVE-2026-80547 CVE-2026-80548                      CVE-2026-80549 CVE-2026-80550 CVE-2026-80551 CVE-2026-80552                      CVE-2026-80553 CVE-2026-80554 CVE-2026-80555 CVE-2026-80556                      CVE-2026-80557 CVE-2026-80558 CVE-2026-80559 CVE-2026-80560                      CVE-2026-80561 CVE-2026-80562 CVE-2026-80563 CVE-2026-80565                      CVE-2026-80566 CVE-2026-80567 CVE-2026-80568 CVE-2026-80569                      CVE-2026-80570 CVE-2026-80572 CVE-2026-80573 CVE-2026-80574                      CVE-2026-80575 CVE-2026-80576 CVE-2026-80577 CVE-2026-80578                      CVE-2026-80583 CVE-2026-80584 CVE-2026-80585 CVE-2026-80586                      CVE-2026-80587 CVE-2026-80589 CVE-2026-80590 CVE-2026-80678                      CVE-2026-80679 CVE-2026-80680 CVE-2026-80681 CVE-2026-80684                      CVE-2026-80686 CVE-2026-80689 CVE-2026-80691 CVE-2026-80694                      CVE-2026-80695 CVE-2026-80696 CVE-2026-80700 CVE-2026-80702                      CVE-2026-80703 CVE-2026-80704 CVE-2026-80706 CVE-2026-80707                      CVE-2026-80708 CVE-2026-80709 CVE-2026-80710 CVE-2026-80711                      CVE-2026-80714 CVE-2026-80715 CVE-2026-80716 CVE-2026-80717                      CVE-2026-80718 CVE-2026-80722 CVE-2026-80723 CVE-2026-80725                      CVE-2026-80726 CVE-2026-80727 CVE-2026-80728 CVE-2026-80730                      CVE-2026-80731 CVE-2026-80732 CVE-2026-80733 CVE-2026-80736                      CVE-2026-80737 CVE-2026-80739 CVE-2026-80742 CVE-2026-80743                      CVE-2026-80744 CVE-2026-80749 CVE-2026-80752 CVE-2026-80754                      CVE-2026-80756 CVE-2026-80757 CVE-2026-80759 CVE-2026-80763                      CVE-2026-80764 CVE-2026-80765 CVE-2026-80767 CVE-2026-80770                      CVE-2026-80771 CVE-2026-80772 CVE-2026-80779 CVE-2026-80781                      CVE-2026-80782 CVE-2026-80784 CVE-2026-80788 CVE-2026-80789                      CVE-2026-80790 CVE-2026-80791 CVE-2026-80792 CVE-2026-80793                      CVE-2026-80794 CVE-2026-80795 CVE-2026-80797 CVE-2026-80798                      CVE-2026-80799 CVE-2026-80800 CVE-2026-80801 CVE-2026-80802                      CVE-2026-80803 CVE-2026-80805 CVE-2026-80808 CVE-2026-80809                      CVE-2026-80812 CVE-2026-80814 CVE-2026-80815 CVE-2026-80819                      CVE-2026-80820 CVE-2026-80823 CVE-2026-80887 CVE-2026-80888                      CVE-2026-80889 CVE-2026-80890 CVE-2026-80891 CVE-2026-80892                      CVE-2026-80893 CVE-2026-80894 CVE-2026-80901 CVE-2026-80902                      CVE-2026-80903 CVE-2026-80904 CVE-2026-80906 CVE-2026-80907                      CVE-2026-80908 CVE-2026-80909 CVE-2026-80910 CVE-2026-80911                      CVE-2026-80912 CVE-2026-80913 CVE-2026-80915 CVE-2026-80916                      CVE-2026-80917 CVE-2026-80918     Debian Bug     : 1142912 1143545

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.107-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.102-6.12.107, and adds drivers for     Alcor card readers.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6466 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6466-1                   security@debian.org     https://www.debian.org/security/                     Salvatore Bonaccorso     August 25, 2026                       https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : linux     CVE ID         : CVE-2025-38525 CVE-2025-40054 CVE-2026-43197 CVE-2026-53092                      CVE-2026-64017 CVE-2026-64586 CVE-2026-68082 CVE-2026-68118                      CVE-2026-68132 CVE-2026-68138 CVE-2026-68159 CVE-2026-68166                      CVE-2026-68169 CVE-2026-68198 CVE-2026-68253 CVE-2026-68254                      CVE-2026-68264 CVE-2026-68266 CVE-2026-68267 CVE-2026-68273                      CVE-2026-68276 CVE-2026-68322 CVE-2026-68367 CVE-2026-68431                      CVE-2026-68451 CVE-2026-68452 CVE-2026-68480 CVE-2026-72111                      CVE-2026-74440 CVE-2026-74441 CVE-2026-74442 CVE-2026-74443                      CVE-2026-74444 CVE-2026-74445 CVE-2026-74446 CVE-2026-74447                      CVE-2026-74448 CVE-2026-74450 CVE-2026-74451 CVE-2026-74452                      CVE-2026-74453 CVE-2026-74454 CVE-2026-74455 CVE-2026-74456                      CVE-2026-74457 CVE-2026-74458 CVE-2026-74459 CVE-2026-74460                      CVE-2026-74461 CVE-2026-74463 CVE-2026-74464 CVE-2026-74465                      CVE-2026-74467 CVE-2026-74468 CVE-2026-74469 CVE-2026-74470                      CVE-2026-74471 CVE-2026-74472 CVE-2026-74473 CVE-2026-74474                      CVE-2026-74475 CVE-2026-74476 CVE-2026-74478 CVE-2026-74479                      CVE-2026-74480 CVE-2026-74481 CVE-2026-74482 CVE-2026-74483                      CVE-2026-74484 CVE-2026-74485 CVE-2026-74487 CVE-2026-74488                      CVE-2026-74490 CVE-2026-74492 CVE-2026-74493 CVE-2026-74494                      CVE-2026-74495 CVE-2026-74497 CVE-2026-74498 CVE-2026-74499                      CVE-2026-74500 CVE-2026-74501 CVE-2026-74502 CVE-2026-74503                      CVE-2026-74504 CVE-2026-74505 CVE-2026-74507 CVE-2026-74508                      CVE-2026-74509 CVE-2026-74510 CVE-2026-74512 CVE-2026-74514                      CVE-2026-74515 CVE-2026-74516 CVE-2026-74517 CVE-2026-74518                      CVE-2026-74519 CVE-2026-74522 CVE-2026-74523 CVE-2026-74524                      CVE-2026-74525 CVE-2026-74531 CVE-2026-74532 CVE-2026-74535                      CVE-2026-74536 CVE-2026-74540 CVE-2026-74541 CVE-2026-74543                      CVE-2026-74545 CVE-2026-74546 CVE-2026-74547 CVE-2026-74548                      CVE-2026-74549 CVE-2026-74550 CVE-2026-74551 CVE-2026-74552                      CVE-2026-74553 CVE-2026-74555 CVE-2026-74556 CVE-2026-74557                      CVE-2026-74563 CVE-2026-74564 CVE-2026-74565 CVE-2026-74566                      CVE-2026-74567 CVE-2026-74569 CVE-2026-74572 CVE-2026-74574                      CVE-2026-74575 CVE-2026-74576 CVE-2026-74577 CVE-2026-74579                      CVE-2026-74580 CVE-2026-74581 CVE-2026-74582 CVE-2026-74583                      CVE-2026-74585 CVE-2026-74586 CVE-2026-74587 CVE-2026-74588                      CVE-2026-74589 CVE-2026-74590 CVE-2026-74592 CVE-2026-74594                      CVE-2026-74595 CVE-2026-74597 CVE-2026-74598 CVE-2026-74599                      CVE-2026-74601 CVE-2026-74602 CVE-2026-74603 CVE-2026-74604                      CVE-2026-74606 CVE-2026-74607 CVE-2026-74608 CVE-2026-74609                      CVE-2026-74610 CVE-2026-74612 CVE-2026-74613 CVE-2026-74614                      CVE-2026-74615 CVE-2026-74616 CVE-2026-74618 CVE-2026-74619                      CVE-2026-74620 CVE-2026-74621 CVE-2026-74622 CVE-2026-74623                      CVE-2026-74624 CVE-2026-74625 CVE-2026-74628 CVE-2026-74630                      CVE-2026-74631 CVE-2026-74632 CVE-2026-74634 CVE-2026-74635                      CVE-2026-74636 CVE-2026-74637 CVE-2026-74641 CVE-2026-74644                      CVE-2026-74646 CVE-2026-74647 CVE-2026-74648 CVE-2026-74649                      CVE-2026-74650 CVE-2026-74651 CVE-2026-74654 CVE-2026-74655                      CVE-2026-74656 CVE-2026-74657 CVE-2026-74658 CVE-2026-74659                      CVE-2026-74660 CVE-2026-74661 CVE-2026-74663 CVE-2026-74664                      CVE-2026-74665 CVE-2026-74666 CVE-2026-74667 CVE-2026-74668                      CVE-2026-74669 CVE-2026-74670 CVE-2026-74671 CVE-2026-74672                      CVE-2026-74673 CVE-2026-74675 CVE-2026-74676 CVE-2026-74677                      CVE-2026-74678 CVE-2026-74679 CVE-2026-74680 CVE-2026-74682                      CVE-2026-74683 CVE-2026-74684 CVE-2026-74685 CVE-2026-74688                      CVE-2026-74689 CVE-2026-74691 CVE-2026-74692 CVE-2026-74693                      CVE-2026-74694 CVE-2026-74696 CVE-2026-74700 CVE-2026-74701                      CVE-2026-74704 CVE-2026-74705 CVE-2026-74710 CVE-2026-74712                      CVE-2026-74714 CVE-2026-74717 CVE-2026-74718 CVE-2026-74719                      CVE-2026-74720 CVE-2026-74722 CVE-2026-74724 CVE-2026-74725                      CVE-2026-74726 CVE-2026-74730 CVE-2026-74732     Debian Bug     : 1142912 1143545

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For the stable distribution (trixie), these problems have been fixed in     version 6.12.105-1.

    We recommend that you upgrade your linux packages.

    For the detailed security status of linux please refer to its security     tracker page at:
    https://security-tracker.debian.org/tracker/linux

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - enic: fix tx_hang_reset use-after-free on device removal enic_remove() cancels the reset and     change_mtu_work items but does not cancel tx_hang_reset. A TX timeout that fires while the device is being     removed can schedule enic_tx_hang_reset() so that it runs after free_netdev(), resulting in a use-after-     free. cancel_work_sync() alone is not sufficient here: the still-live watchdog and notify paths can re-     schedule these work items in the window between the cancel and unregister_netdev(). Use     disable_work_sync(), which cancels the work and blocks any subsequent schedule_work() from requeuing it,     and apply it to the reset and change_mtu_work items as well so the same requeue race is closed for all     teardown work. (CVE-2026-74725)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
366742	SUSE SLED15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2026:4706-1)	Nessus	SuSE Local Security Checks	Local	high
365457	Ubuntu 24.04 LTS : Linux kernel (NVIDIA Tegra) vulnerabilities (USN-8886-1)	Nessus	Ubuntu Local Security Checks	Local	high
365299	CentOS Linux 8.5 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.5:CLSA-2026:1791852988)	Nessus	CentOS Local Security Checks	Local	high
364689	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1791800936)	Nessus	Alma Linux Local Security Checks	Local	high
364682	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1791800936)	Nessus	Rocky Linux Local Security Checks	Local	high
364675	CentOS Linux 8 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS-STREAM8:CLSA-2026:1791780738)	Nessus	CentOS Local Security Checks	Local	high
364137	Oracle Linux 10 / 9 : Unbreakable Enterprise kernel (ELSA-2026-500374)	Nessus	Oracle Linux Local Security Checks	Local	high
360912	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-abi-stablelists / kernel-core / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1789898700)	Nessus	Alma Linux Local Security Checks	Local	high
352722	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1789037015)	Nessus	CentOS Local Security Checks	Local	high
348574	Debian dla-4788 : ata-modules-6.12.100+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	medium
343049	Oracle Linux 10 / 9 : Unbreakable Enterprise kernel (ELSA-2026-500248)	Nessus	Oracle Linux Local Security Checks	Local	high
339550	Debian dsa-6466 : ata-modules-6.12.101+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	Local	medium
339015	Linux Distros Unpatched Vulnerability : CVE-2026-74725	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-74725

high

Tenable Plugins

high

high

high

high

high

high

high

high

high

medium

high

medium

high