jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg("String too long"), the raw-file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr(). With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-buffer-overflow. This vulnerability is fixed in 1.8.2.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6416 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6416-1                   security@debian.org     https://www.debian.org/security/                                  Aron Xu     August 07, 2026                       https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : jq     CVE ID         : CVE-2024-53427 CVE-2026-32316 CVE-2026-40612 CVE-2026-41256                      CVE-2026-41257 CVE-2026-43894 CVE-2026-43895 CVE-2026-43896                      CVE-2026-44777 CVE-2026-47770 CVE-2026-49839 CVE-2026-54679     Debian Bug     :

    Multiple security issues were discovered in jq, a command-line JSON     processor, which could result in denial of service or potentially the     execution of arbitrary code when processing untrusted input.

    This update additionally addresses three issues for which no CVE has been     assigned: GHSA-ggc9-rpv2-xgpm, GHSA-gvwx-xj9r-3frq and GHSA-gf4g-95wj-4q4r.

    Two changes in behaviour follow from the fixes above. An operation whose     result would exceed the internal string length limit, such as repeating     or escaping a very large string, now terminates with the error String     too long instead of returning a truncated result. A comparison or     containment check on a deeply nested value now reports an error rather     than recursing until the stack is exhausted. Filters relying on the     previous behaviour will report an error where they previously appeared     to succeed.

    For the stable distribution (trixie), these problems have been fixed in     version 1.7.1-6+deb13u3.

    We recommend that you upgrade your jq packages.

    For the detailed security status of jq please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/jq

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES16 / SLES_SAP16 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:22637-1 advisory.

    This update for jq fixes the following issues

    - CVE-2026-43896: unbounded recursion in jv_object_merge_recursive() can lead to C stack exhaustion and a     process crash (bsc#1265075).
    - CVE-2026-44777: uncontrolled recursion in ordinary module loader when two valid modules `include` each     other can lead to stack exhaustion and process crash (bsc#1265076).
    - CVE-2026-49839: fixed a bug where jq --rawfile can turn a handled oversized-string error into invalid-     state reuse and a real heap out-of-bounds write in assertion-disabled builds (bsc#1269220).
    - CVE-2026-54679: integer overflow in jvp_string_append can lead to a buffer overrun on 32-bit systems     (bsc#1269390).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote openSUSE 16 host has packages installed that are affected by multiple vulnerabilities as referenced in the openSUSE-SU-2026:21318-1 advisory.

    This update for jq fixes the following issues

    - CVE-2026-43896: unbounded recursion in jv_object_merge_recursive() can lead to C stack exhaustion and a     process crash (bsc#1265075).
    - CVE-2026-44777: uncontrolled recursion in ordinary module loader when two valid modules `include` each     other can lead to stack exhaustion and process crash (bsc#1265076).
    - CVE-2026-49839: fixed a bug where jq --rawfile can turn a handled oversized-string error into invalid-     state reuse and a real heap out-of-bounds write in assertion-disabled builds (bsc#1269220).
    - CVE-2026-54679: integer overflow in jvp_string_append can lead to a buffer overrun on 32-bit systems     (bsc#1269390).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4662 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4662-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                   Andreas Henriksson     July 01, 2026                                 https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : jq     Version        : 1.6-2.1+deb12u2     CVE ID         : CVE-2026-32316 CVE-2026-33947 CVE-2026-33948 CVE-2026-39956                      CVE-2026-39979 CVE-2026-40164 CVE-2026-41256 CVE-2026-41257                      CVE-2026-43894 CVE-2026-43895 CVE-2026-43896 CVE-2026-44777                      CVE-2026-47770 CVE-2026-49839 CVE-2026-54679     Debian Bug     : 1133921 1136445

    It was found that jq, a lightweight and flexible command-line JSON parser, was     vulnerable to multiple memory corruption attacks, which could lead to     application crashes, denial-of-service conditions, and potentially arbitrary     code execution through heap corruption when parsing untrusted input.

    For Debian 12 bookworm, these problems have been fixed in version     1.6-2.1+deb12u2.

    For Debian 11 bullseye, these issues have been addressed in DLA-4599-1 and     DLA-4661-1.

    We recommend that you upgrade your jq packages.

    For the detailed security status of jq please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/jq

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4661 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4661-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                   Andreas Henriksson     July 01, 2026                                 https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : jq     Version        : 1.6-2.1+deb11u3     CVE ID         : CVE-2026-43894 CVE-2026-47770 CVE-2026-49839 CVE-2026-54679     Debian Bug     : 1136445

    It was found that jq, a lightweight and flexible command-line JSON parser, was     vulnerable to multiple memory corruption attacks, which could lead to     application crashes, denial-of-service conditions, and potentially arbitrary     code execution through heap corruption when parsing untrusted input.

    For Debian 11 bullseye, these problems have been fixed in version     1.6-2.1+deb11u3.

    We recommend that you upgrade your jq packages.

    For the detailed security status of jq please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/jq

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

It is, therefore, affected by a vulnerability as referenced in the ALAS2023-2026-1860 advisory.

    jq --rawfile invalid-state reuse after String too long causes heap-buffer-overflow (CVE-2026-49839)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - jq is a command-line JSON processor. Prior to 1.8.2,` jq --rawfile` can turn a handled oversized-string     error into invalid-state reuse and a real heap out-of-bounds write in assertion-disabled builds. When     jv_load_file(raw=1) reads an attacker-controlled file, it repeatedly appends file chunks to the same jv     string accumulator. Once jv_string_append_buf() returns jv_invalid_with_msg(String too long), the raw-     file loop does not stop. If the file contains at least one more byte, the next loop iteration appends a     new chunk to an object that is already invalid. With assertions enabled this aborts in jvp_string_ptr().
    With assertions disabled, the invalid object is interpreted as a string object and ASan reports heap-     buffer-overflow. This vulnerability is fixed in 1.8.2. (CVE-2026-49839)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
333519	Debian dsa-6416 : jq - security update	Nessus	Debian Local Security Checks	Local	high
327564	SUSE SLES16 Security Update : jq (SUSE-SU-2026:22637-1)	Nessus	SuSE Local Security Checks	Local	medium
327243	openSUSE 16 Security Update : jq (openSUSE-SU-2026:21318-1)	Nessus	SuSE Local Security Checks	Local	medium
324575	Debian dla-4662 : jq - security update	Nessus	Debian Local Security Checks	Local	high
324574	Debian dla-4661 : jq - security update	Nessus	Debian Local Security Checks	Local	medium
322077	Amazon Linux 2023 : jq, jq-devel (ALAS2023-2026-1860)	Nessus	Amazon Linux Local Security Checks	Local	high
320354	Linux Distros Unpatched Vulnerability : CVE-2026-49839	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-49839

high

Tenable Plugins

high

medium

medium

high

medium

high

high