ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-22, an invalid connected-components:keep-top value could result in a heap buffer over-read when performing the connected components operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-22.

The version of ImageMagick installed on the remote host is prior to 6.9.10.97-1. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2026-3346 advisory.

    When writing an IPTC output file a malicious input file could cause an out of bounds read of a single     byte. (as per: https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-7wff-wpr6-vmhm)     (CVE-2026-42326)

    Due to a missing check in the PSD decoder it would be possible to bypass the list-length resource policy     when decoding a PSD image. Other security limits would still apply. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-cwpj-h54c-xjpx) (CVE-2026-45031)

    An of by one in the meta encoder could result in an out of bounds read of a single byte in the meta     encoder. (as per: https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-cr6r-hmj8-pr7r)     (CVE-2026-45358)

    An invalid connected-components:keep-top value could result in a heap buffer over-read when performing the     connected components operation (CVE-2026-45359)

    When performing a polynomial distortion an out of bounds over-read of 24 bytes can occur when specifying     specific arguments. (CVE-2026-45624)

    Because of a missing check in the MNG coder it would be possible to read more images than the list limit     policy would allow resulting in excessive resource use. (CVE-2026-45664)

    When reading multiple images with different dimensions an out of bounds heap write can occur. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-36wm-hprc-mcf5) (CVE-2026-46520)

    When using LZMA compression in the MIFF encoder an out of bounds write can occur due to a missing check.
    (as per: https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-jcqp-6r6f-3mfx)     (CVE-2026-46521)

    Due to a missing check in the MIFF decoder a crafted file could cause an infinite loop resulting in CPU     exhaustion. (CVE-2026-46522)

    A crafted MSL image can trigger a heap-use-after-free. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-5r4x-w6p5-222q) (CVE-2026-46523)

    An incorrect check in the JP2 will result in an heap buffer over-write of a single byte when specifying     certain options. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-533m-3wf6-c33v) (CVE-2026-46559)

    An attacker who can connect to a magick -distribute-cache service can cause a heap buffer over-write in     the server process. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-p93h-f2jc-477j) (CVE-2026-46692)

    An attacker who can connect to a magick -distribute-cache service can hijack a file descriptor in the     server process when a race condition is met. (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-4g75-9r48-jf92) (CVE-2026-46693)

    The distributed pixel cache was originally designed to operate without a challenge-response authentication     model. However, given today's heightened security expectations, we have changed our implementation.
    (CVE-2026-47165)

    An attacker who can connect to a magick -distribute-cache service can cause a heap buffer over-read in the     server process (as per:
    https://github.com/ImageMagick/ImageMagick/security/advisories/GHSA-6gxq-f64p-5w6f) (CVE-2026-47166)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 11 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4609 advisory.

    - -------------------------------------------------------------------------     Debian LTS Advisory DLA-4609-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                   Bastien Roucaris     May 30, 2026                                  https://wiki.debian.org/LTS
    - -------------------------------------------------------------------------

    Package        : imagemagick     Version        : 8:6.9.11.60+dfsg-1.3+deb11u13     CVE ID         : CVE-2026-33901 CVE-2026-42050 CVE-2026-42326 CVE-2026-45031                      CVE-2026-45358 CVE-2026-45359 CVE-2026-45624 CVE-2026-45664                      CVE-2026-46520 CVE-2026-46521 CVE-2026-46522 CVE-2026-46523                      CVE-2026-46559 CVE-2026-46692 CVE-2026-46693 CVE-2026-47165                      CVE-2026-47166

    Multiple security vulnerabilities were discovered in imagemagick, a     software suite used for editing and manipulating digital images, which     could lead to denial of service, information disclosure or     potentially arbitrary code execution if malformed images are processed.

    For Debian 11 bullseye, these problems have been fixed in version     8:6.9.11.60+dfsg-1.3+deb11u13.

    We recommend that you upgrade your imagemagick packages.

    For the detailed security status of imagemagick please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/imagemagick

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6310 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6310-1                   security@debian.org     https://www.debian.org/security/                       Moritz Muehlenhoff     May 29, 2026                          https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : imagemagick     CVE ID         : CVE-2026-42050 CVE-2026-42326 CVE-2026-45031 CVE-2026-45359                      CVE-2026-45624 CVE-2026-45664 CVE-2026-46520 CVE-2026-46521                      CVE-2026-46522 CVE-2026-46523 CVE-2026-46559 CVE-2026-46692                      CVE-2026-46693 CVE-2026-47165 CVE-2026-47166

    Multiple security vulnerabilities were discovered in imagemagick, a     software suite used for editing and manipulating digital images, which     could lead to denial of service, information disclosure or     potentially arbitrary code execution if malformed images are processed.

    For the oldstable distribution (bookworm), these problems have been fixed     in version 8:6.9.11.60+dfsg-1.6+deb12u10.

    We recommend that you upgrade your imagemagick packages.

    For the detailed security status of imagemagick please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/imagemagick

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host has a version of ImageMagick installed that is prior to 6.9.13-48 or 7.x prior 7.1.2-22. It is, therefore, affected by a vulnerability.

  — An invalid connected-components:keep-top value could result in a heap buffer over-read when performing the     connected components operation. (CVE-2026-45359)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 13 host has packages installed that are affected by multiple vulnerabilities as referenced in the dsa-6298 advisory.

    - -------------------------------------------------------------------------     Debian Security Advisory DSA-6298-1                   security@debian.org     https://www.debian.org/security/                       Moritz Muehlenhoff     May 26, 2026                          https://www.debian.org/security/faq
    - -------------------------------------------------------------------------

    Package        : imagemagick     CVE ID         : CVE-2026-42050 CVE-2026-42326 CVE-2026-45031 CVE-2026-45358                      CVE-2026-45359 CVE-2026-45624 CVE-2026-45664 CVE-2026-46520                      CVE-2026-46521 CVE-2026-46522 CVE-2026-46523 CVE-2026-46557                      CVE-2026-46559 CVE-2026-46692 CVE-2026-46693 CVE-2026-47165                      CVE-2026-47166

    Multiple security vulnerabilities were discovered in imagemagick,     a software suite used for editing and manipulating digital images, which     could lead to denial of service, information disclosure or potentially     arbitrary code execution if malformed images are processed.

    For the stable distribution (trixie), these problems have been fixed in     version 8:7.1.1.43+dfsg1-1+deb13u9.

    We recommend that you upgrade your imagemagick packages.

    For the detailed security status of imagemagick please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/imagemagick

    Further information about Debian Security Advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://www.debian.org/security/

    Mailing list: debian-security-announce@lists.debian.org

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to     versions 6.9.13-48 and 7.1.2-22, an invalid connected-components:keep-top value could result in a heap     buffer over-read when performing the connected components operation. This issue has been patched in     versions 6.9.13-48 and 7.1.2-22. (CVE-2026-45359)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Severity
319815	Amazon Linux 2 : ImageMagick, --advisory ALAS2-2026-3346 (ALAS-2026-3346)	Nessus	Amazon Linux Local Security Checks	medium
318051	Debian dla-4609 : imagemagick - security update	Nessus	Debian Local Security Checks	medium
318000	Debian dsa-6310 : imagemagick - security update	Nessus	Debian Local Security Checks	medium
317748	ImageMagick < 6.9.13-48 / 7.x < 7.1.2-22 Vulnerability	Nessus	Misc.	medium
316926	Debian dsa-6298 : imagemagick - security update	Nessus	Debian Local Security Checks	medium
316535	Linux Distros Unpatched Vulnerability : CVE-2026-45359	Nessus	Misc.	medium

Detections

Analytics

CVE-2026-45359

medium

Tenable Plugins

medium

medium

medium

medium

medium

medium