In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error]

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793100968 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: udf: Avoid double brelse() in     udf_rename() syzbot reported a warning like below [1]: VFS: brelse: Trying to free free buffer WARNING:
    CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0 ... Call Trace: <TASK>     invalidate_bh_lru+0x99/0x150 smp_call_function_many_cond+0xe2a/0x10c0 ?     generic_remap_file_range_prep+0x50/0x50 ? __brelse+0xa0/0xa0 ? __mutex_lock+0x21c/0x12d0 ?     smp_call_on_cpu+0x250/0x250 ? rcu_read_lock_sched_held+0xb/0x60 ? lock_release+0x587/0x810 ?
    __brelse+0xa0/0xa0 ? generic_remap_file_range_prep+0x50/0x50 on_each_cpu_cond_mask+0x3c/0x80     blkdev_flush_mapping+0x13a/0x2f0 blkdev_put_whole+0xd3/0xf0 blkdev_put+0x222/0x760     deactivate_locked_super+0x96/0x160 deactivate_super+0xda/0x100 cleanup_mnt+0x222/0x3d0     task_work_run+0x149/0x240 ? task_work_cancel+0x30/0x30 do_exit+0xb29/0x2a40 ?     reacquire_held_locks+0x4a0/0x4a0 ? do_raw_spin_lock+0x12a/0x2b0 ? mm_update_next_owner+0x7c0/0x7c0 ?     rwlock_bug.part.0+0x90/0x90 ? zap_other_threads+0x234/0x2d0 do_group_exit+0xd0/0x2a0
    __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause     of the issue is that brelse() is called on both ofibh.sbh and ofibh.ebh by udf_find_entry() when it     returns NULL. However, brelse() is called by udf_rename(), too. So, b_count on buffer_head becomes     unbalanced. This patch fixes the issue by not calling brelse() by udf_rename() when udf_find_entry()     returns NULL. (CVE-2022-50755)

  - In the Linux kernel, the following vulnerability has been resolved: soc: qcom: qmi_encdec: Restrict string     length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null     terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of     bounds access when the NULL character is appended in decoding. (CVE-2023-53729)

  - In the Linux kernel, the following vulnerability has been resolved: can: isotp: check CAN address family     in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the     right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field:
    bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the     userspace should be notified about the wrong address family field content. (CVE-2023-54105)

  - In the Linux kernel, the following vulnerability has been resolved: usb: rndis_host: Secure rndis_query     check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by     incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large     value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently     the response pointer will be referring to a location past the expected buffer boundaries allowing     information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. (CVE-2023-54110)

  - In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds     in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type.
    When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in     drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The     setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as     throughout the code just the erase size is considered to determine whether an erase type is supported or     not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus     when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds.
    [ta: refine changes, new commit message, fix compilation error] (CVE-2023-54295)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1793100968 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: udf: Avoid double brelse() in     udf_rename() syzbot reported a warning like below [1]: VFS: brelse: Trying to free free buffer WARNING:
    CPU: 2 PID: 7301 at fs/buffer.c:1145 __brelse+0x67/0xa0 ... Call Trace: <TASK>     invalidate_bh_lru+0x99/0x150 smp_call_function_many_cond+0xe2a/0x10c0 ?     generic_remap_file_range_prep+0x50/0x50 ? __brelse+0xa0/0xa0 ? __mutex_lock+0x21c/0x12d0 ?     smp_call_on_cpu+0x250/0x250 ? rcu_read_lock_sched_held+0xb/0x60 ? lock_release+0x587/0x810 ?
    __brelse+0xa0/0xa0 ? generic_remap_file_range_prep+0x50/0x50 on_each_cpu_cond_mask+0x3c/0x80     blkdev_flush_mapping+0x13a/0x2f0 blkdev_put_whole+0xd3/0xf0 blkdev_put+0x222/0x760     deactivate_locked_super+0x96/0x160 deactivate_super+0xda/0x100 cleanup_mnt+0x222/0x3d0     task_work_run+0x149/0x240 ? task_work_cancel+0x30/0x30 do_exit+0xb29/0x2a40 ?     reacquire_held_locks+0x4a0/0x4a0 ? do_raw_spin_lock+0x12a/0x2b0 ? mm_update_next_owner+0x7c0/0x7c0 ?     rwlock_bug.part.0+0x90/0x90 ? zap_other_threads+0x234/0x2d0 do_group_exit+0xd0/0x2a0
    __x64_sys_exit_group+0x3a/0x50 do_syscall_64+0x34/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause     of the issue is that brelse() is called on both ofibh.sbh and ofibh.ebh by udf_find_entry() when it     returns NULL. However, brelse() is called by udf_rename(), too. So, b_count on buffer_head becomes     unbalanced. This patch fixes the issue by not calling brelse() by udf_rename() when udf_find_entry()     returns NULL. (CVE-2022-50755)

  - In the Linux kernel, the following vulnerability has been resolved: soc: qcom: qmi_encdec: Restrict string     length in decode The QMI TLV value for strings in a lot of qmi element info structures account for null     terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of     bounds access when the NULL character is appended in decoding. (CVE-2023-53729)

  - In the Linux kernel, the following vulnerability has been resolved: can: isotp: check CAN address family     in isotp_bind() Add missing check to block non-AF_CAN binds. Syzbot created some code which matched the     right sockaddr struct size but used AF_XDP (0x2C) instead of AF_CAN (0x1D) in the address family field:
    bind$xdp(r2, &(0x7f0000000540)={0x2c, 0x0, r4, 0x0, r2}, 0x10) ^^^^ This has no funtional impact but the     userspace should be notified about the wrong address family field content. (CVE-2023-54105)

  - In the Linux kernel, the following vulnerability has been resolved: usb: rndis_host: Secure rndis_query     check against int overflow Variables off and len typed as uint32 in rndis_query function are controlled by     incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large     value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently     the response pointer will be referring to a location past the expected buffer boundaries allowing     information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. (CVE-2023-54110)

  - In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds     in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type.
    When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in     drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The     setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as     throughout the code just the erase size is considered to determine whether an erase type is supported or     not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus     when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds.
    [ta: refine changes, new commit message, fix compilation error] (CVE-2023-54295)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-013564 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type

    spi_nor_set_erase_type() was used either to set or to mask out an erase     type. When we used it to mask out an erase type a shift-out-of-bounds     was hit:
    UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24     shift exponent 4294967295 is too large for 32-bit type 'int'

    The setting of the size_{shift, mask} and of the opcode are unnecessary     when the erase size is zero, as throughout the code just the erase size     is considered to determine whether an erase type is supported or not.
    Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF     is an unused opcode. Thus when masking out an erase type, just set the     erase size to zero. This will fix the shift-out-of-bounds.

    [ta: refine changes, new commit message, fix compilation error]

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-011155 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type

    spi_nor_set_erase_type() was used either to set or to mask out an erase     type. When we used it to mask out an erase type a shift-out-of-bounds     was hit:
    UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24     shift exponent 4294967295 is too large for 32-bit type 'int'

    The setting of the size_{shift, mask} and of the opcode are unnecessary     when the erase size is zero, as throughout the code just the erase size     is considered to determine whether an erase type is supported or not.
    Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF     is an unused opcode. Thus when masking out an erase type, just set the     erase size to zero. This will fix the shift-out-of-bounds.

    [ta: refine changes, new commit message, fix compilation error]

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:0617-1 advisory.

    The SUSE Linux Enterprise 15 SP4 kernel was updated to fix various security issues

    The following security issues were fixed:

    - CVE-2022-50630: mm: hugetlb: fix UAF in hugetlb_handle_userfault (bsc#1254785).
    - CVE-2022-50697: mrp: introduce active flags to prevent UAF when applicant uninit (bsc#1255594).
    - CVE-2022-50700: wifi: ath10k: Delay the unmapping of the buffer (bsc#1255576).
    - CVE-2023-53215: sched/fair: Don't balance task to its current running CPU (bsc#1250397).
    - CVE-2023-53254: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels (bsc#1249871).
    - CVE-2023-53781: smc: Fix use-after-free in tcp_write_timer_handler() (bsc#1254751).
    - CVE-2023-54142: gtp: Fix use-after-free in __gtp_encap_destroy() (bsc#1256095).
    - CVE-2023-54243: netfilter: ebtables: fix table blob use-after-free (bsc#1255908).
    - CVE-2024-28956: x86/its: Enumerate Indirect Target Selection (ITS) bug (bsc#1242006).
    - CVE-2024-36348: x86/bugs: Add a Transient Scheduler Attacks mitigation (bsc#1238896).
    - CVE-2024-36349: x86/bugs: Add a Transient Scheduler Attacks mitigation (bsc#1238896).
    - CVE-2024-36350: x86/bugs: Add a Transient Scheduler Attacks mitigation (bsc#1238896).
    - CVE-2024-36357: x86/bugs: Add a Transient Scheduler Attacks mitigation (bsc#1238896).
    - CVE-2024-44987: ipv6: prevent UAF in ip6_send_skb() (bsc#1230185).
    - CVE-2024-46854: net: dpaa: Pad packets to ETH_ZLEN (bsc#1231084).
    - CVE-2025-21738: ata: libata-sff: Ensure that we cannot write outside the allocated buffer (bsc#1238917).
    - CVE-2025-38068: crypto: lzo - Fix compression buffer overrun (bsc#1245210).
    - CVE-2025-38129: page_pool: fix inconsistency for page_pool_ring_lock() (bsc#1245723).
    - CVE-2025-38159: wifi: rtw88: fix the 'para' buffer size to avoid reading out of bounds (bsc#1245751).
    - CVE-2025-38375: virtio-net: ensure the received length does not exceed allocated size (bsc#1247177).
    - CVE-2025-39977: futex: Prevent use-after-free during requeue-PI (bsc#1252046).
    - CVE-2025-40019: crypto: essiv - Check ssize for decryption and in-place encryption (bsc#1252678).
    - CVE-2025-40139: net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forward (bsc#1253409).
    - CVE-2025-40215: kABI: xfrm: delete x->tunnel as we delete x (bsc#1254959).
    - CVE-2025-40220: fuse: fix livelock in synchronous file put from fuseblk workers (bsc#1254520).
    - CVE-2025-40233: ocfs2: clear extent cache after moving/defragmenting extents (bsc#1254813).
    - CVE-2025-40257: mptcp: fix a race in mptcp_pm_del_add_timer() (bsc#1254842).
    - CVE-2025-40258: mptcp: fix race condition in mptcp_schedule_work() (bsc#1254843).
    - CVE-2025-40277: drm/vmwgfx: Validate command header size against (bsc#1254894).
    - CVE-2025-40280: tipc: Fix use-after-free in tipc_mon_reinit_self() (bsc#1254847).
    - CVE-2025-40300: Documentation/hw-vuln: Add VMSCAPE documentation (bsc#1247483).
    - CVE-2025-40331: sctp: Prevent TOCTOU out-of-bounds write (bsc#1254615).
    - CVE-2025-68183: ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr (bsc#1255251).
    - CVE-2025-68284: libceph: prevent potential out-of-bounds writes in handle_auth_session_key()     (bsc#1255377).
    - CVE-2025-68285: libceph: fix potential use-after-free in have_mon_and_osd_map() (bsc#1255401).
    - CVE-2025-68312: usbnet: Prevents free active kevent (bsc#1255171).
    - CVE-2025-68732: gpu: host1x: Fix race in syncpt alloc/free (bsc#1255688).
    - CVE-2025-68813: ipvs: fix ipv4 null-ptr-deref in route error path (bsc#1256641).
    - CVE-2025-71085: ipv6: BUG() in pskb_expand_head() as part of calipso_skbuff_setattr() (bsc#1256623).
    - CVE-2025-71089: iommu: disable SVA when CONFIG_X86 is set (bsc#1256612).
    - CVE-2025-71112: net: hns3: add VLAN id validation before using (bsc#1256726).
    - CVE-2025-71116: libceph: make decode_pool() more resilient against corrupted osdmaps (bsc#1256744).
    - CVE-2025-71120: SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf     (bsc#1256779).
    - CVE-2026-22999: net/sched: sch_qfq: do not free existing class in qfq_change_class() (bsc#1257236).
    - CVE-2026-23001: macvlan: fix possible UAF in macvlan_forward_source() (bsc#1257232).
    - CVE-2026-23074: net/sched: Enforce that teql can only be used as root qdisc (bsc#1257749).
    - CVE-2026-23089: ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free() (bsc#1257790).

    The following non security issues were fixed:

    - net: hv_netvsc: reject RSS hash key programming without RX indirection table (bsc#1257473).
    - net: tcp: allow zero-window ACK update the window (bsc#1254767).
    - net: tcp: send zero-window ACK when no memory (bsc#1254767).
    - scsi: storvsc: Process unsupported MODE_SENSE_10 (bsc#1257296).
    - tcp: correct handling of extreme memory squeeze (bsc#1254767).
    - x86/CPU/AMD: Add ZenX generations flags (bsc#1238896).
    - x86/its: Fix crash during dynamic its initialization (bsc#1257771).
    - x86/modules: Set VM_FLUSH_RESET_PERMS in module_alloc() (bsc#1257771).
    - x86: make page fault handling disable interrupts properly (git-fixes).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:0317-1 advisory.

    The SUSE Linux Enterprise 15 SP5 kernel was updated to fix various security issues

    The following security issues were fixed:

    - CVE-2022-50630: mm: hugetlb: fix UAF in hugetlb_handle_userfault (bsc#1254785).
    - CVE-2022-50700: wifi: ath10k: Delay the unmapping of the buffer (bsc#1255576).
    - CVE-2023-53254: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels (bsc#1249871).
    - CVE-2023-53781: smc: Fix use-after-free in tcp_write_timer_handler() (bsc#1254751).
    - CVE-2024-56590: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet (bsc#1235038).
    - CVE-2025-39977: futex: Prevent use-after-free during requeue-PI (bsc#1252046).
    - CVE-2025-40019: crypto: essiv - Check ssize for decryption and in-place encryption (bsc#1252678).
    - CVE-2025-40139: smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set() (bsc#1253409).
    - CVE-2025-40215: kABI: xfrm: delete x->tunnel as we delete x (bsc#1254959).
    - CVE-2025-40220: fuse: fix livelock in synchronous file put from fuseblk workers (bsc#1254520).
    - CVE-2025-40233: ocfs2: clear extent cache after moving/defragmenting extents (bsc#1254813).
    - CVE-2025-40258: mptcp: fix race condition in mptcp_schedule_work() (bsc#1254843).
    - CVE-2025-40277: drm/vmwgfx: Validate command header size against (bsc#1254894).
    - CVE-2025-40280: tipc: Fix use-after-free in tipc_mon_reinit_self() (bsc#1254847).
    - CVE-2025-40331: sctp: Prevent TOCTOU out-of-bounds write (bsc#1254615).
    - CVE-2025-68732: gpu: host1x: Fix race in syncpt alloc/free (bsc#1255688).

    The following non security issues were fixed:

    - ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids() (git-fixes).
    - ACPI: PRM: Remove unnecessary strict handler address checks (git-fixes).
    - ACPI: property: Do not pass NULL handles to acpi_attach_data() (git-fixes).
    - ACPI: property: Fix buffer properties extraction for subnodes (git-fixes).
    - KVM: SVM: Fix TSC_AUX virtualization setup (git-fixes).
    - RDMA/cm: Rate limit destroy CM ID timeout error message (git-fixes).
    - RDMA/counter: Check CAP_NET_RAW check in user namespace for RDMA counters (git-fixes).
    - RDMA/hns: Fix the modification of max_send_sge (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for anchor create (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for devx create (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for flow create (git-fixes).
    - RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set (git-fixes).
    - RDMA/nldev: Check CAP_NET_RAW in user namespace for QP modify (git-fixes).
    - RDMA/uverbs: Add empty rdma_uattrs_has_raw_cap() declaration (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for QP create (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for RAW QP create (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for flow create (git-fixes).
    - arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled (git-fixes).
    - cpuidle/poll: Ensure IRQs stay disabled after cpuidle_state::enter() calls (git-fixes).
    - cpuidle: Move IRQ state validation (git-fixes).
    - cpuidle: haltpoll: Do not enable interrupts when entering idle (git-fixes).
    - dm: free table mempools if not used in __bind (git-fixes).
    - padata: Honor the caller's alignment in case of chunk_size 0 (bsc#1237563).
    - platform/x86/intel-uncore-freq: Fail module load when plat_info is NULL (git-fixes).
    - x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier() (git-fixes).
    - x86/bugs: Use SBPB in write_ibpb() if applicable (git-fixes).
    - x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT (git-fixes).
    - x86/tdx: Drop flags from __tdx_hypercall() (git-fixes).
    - x86/tdx: Dynamically disable SEPT violations from causing #VEs (git-fixes).
    - x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling (git-fixes).
    - x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs (git-fixes).
    - x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed() (git-fixes).
    - x86/tdx: Fix arch_safe_halt() execution for TDX VMs (git-fixes).
    - x86/tdx: Introduce wrappers to read and write TD metadata (git-fixes).
    - x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL (git-fixes).
    - x86/tdx: Make macros of TDCALLs consistent with the spec (git-fixes).
    - x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure (git-fixes).
    - x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm (git-fixes).
    - x86/tdx: Remove 'struct tdx_hypercall_args' (git-fixes).
    - x86/tdx: Remove TDX_HCALL_ISSUE_STI (git-fixes).
    - x86/tdx: Rename __tdx_module_call() to __tdcall() (git-fixes).
    - x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() (git-fixes).
    - x86/tdx: Retry partially-completed page conversion hypercalls (git-fixes).
    - x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid (git-fixes).
    - x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro (git-fixes).
    - x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP (git-fixes).
    - x86/virt/tdx: Wire up basic SEAMCALL functions (git-fixes).
    - xfs: fix sparse inode limits on runt AG (bsc#1254392).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either     to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was     hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too     large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when     the erase size is zero, as throughout the code just the erase size is considered to determine whether an     erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is     an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the     shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error] (CVE-2023-54295)

Note that Nessus relies on the presence of the package as reported by the vendor.

An update of the linux package has been released.

ID	Name	Product	Family	Type	Severity
373068	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793100968)	Nessus	Rocky Linux Local Security Checks	Local	high
373062	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1793100968)	Nessus	Alma Linux Local Security Checks	Local	high
319448	EulerOS Virtualization 2.13.1 : kernel (EulerOS-SA-2026-2132)	Nessus	Huawei Local Security Checks	Local	high
319325	EulerOS Virtualization 2.13.0 : kernel (EulerOS-SA-2026-2171)	Nessus	Huawei Local Security Checks	Local	high
309210	Unity Linux 20.1060a / 20.1070a Security Update: kernel (UTSA-2026-013564)	Nessus	Unity Linux Local Security Checks	Local	medium
308793	Unity Linux 20.1060e / 20.1070e Security Update: kernel (UTSA-2026-011155)	Nessus	Unity Linux Local Security Checks	Local	medium
301628	EulerOS 2.0 SP13 : kernel (EulerOS-SA-2026-1280)	Nessus	Huawei Local Security Checks	Local	high
301595	EulerOS 2.0 SP13 : kernel (EulerOS-SA-2026-1244)	Nessus	Huawei Local Security Checks	Local	high
300092	SUSE SLES15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2026:0617-1)	Nessus	SuSE Local Security Checks	Local	medium
297191	SUSE SLES15 : Security update for the Linux Kernel (SUSE-SU-2026:0317-1)	Nessus	SuSE Local Security Checks	Local	high
280814	Linux Distros Unpatched Vulnerability : CVE-2023-54295	Nessus	Misc.	Local	high
151965	Photon OS 4.0: Linux PHSA-2021-4.0-0065	Nessus	PhotonOS Local Security Checks	Local	high

Detections

Analytics

CVE-2023-54295

medium

Tenable Plugins

high

high

high

high

medium

medium

high

high

medium

high

high

high