A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially resulting in an RCE.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-016651 advisory.

    A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can     allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially     resulting in an RCE.

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can     allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially     resulting in an RCE. (CVE-2020-8165)

Note that Nessus relies on the presence of the package as reported by the vendor.

There are packages installed that are affected by a vulnerability referenced in the following CVE:

  - A deserialization of untrusted data vulnernerability exists in rails < 5.2.4.3, rails < 6.0.3.1 that can
    allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially
    resulting in an RCE. (CVE-2020-8165)

The remote Redhat Enterprise Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:1313 advisory.

    Red Hat Satellite is a systems management tool for Linux-based     infrastructure. It allows for provisioning, remote management, and     monitoring of multiple Linux deployments with a single centralized tool.

    Security Fix(es):

    * foreman: Managing repositories with their id via hammer does not respect the role filters     (CVE-2017-2662)
    * python-psutil: Double free because of refcount mishandling (CVE-2019-18874)
    * candlepin: netty: compression/decompression codecs don't enforce limits on buffer allocation sizes     (CVE-2020-11612)
    * foreman: world-readable OMAPI secret through the ISC DHCP server (CVE-2020-14335)
    * candlepin: resteasy-client: potential sensitive information leakage in JAX-RS RESTEasy Client's     WebApplicationException handling (CVE-2020-25633)
    * python-django: potential SQL injection via tolerance parameter in GIS functions and aggregates on     Oracle (CVE-2020-9402)

    For more details about the security issue(s), including the impact, a CVSS     score, acknowledgments, and other related information, refer to the CVE     page(s) listed in the References section.

    Additional Changes:

    * Usability enhancements to Red Hat's Simple Content Access mode and Satellite

    * Usability improvements to enabling Remote Execution on your hosts.

    * Notifications in the UI to warn users when subscriptions are expiring.

    * Usability enhancements to enable Insights integration with Satellite.

    * Performance improvements to various aspects of the user interface and API.

    * Added support for OpenID Connect for authentication.

    * Usability improvements to the Satellite Installer.

    * Updated Ruby web server to the modern Puma application server which replaces Passenger.

    The items above are not a complete list of changes. This update also fixes     several bugs and adds various enhancements. Documentation for these changes     is available from the Release Notes document linked to in the References     section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for rmt-server fixes the following issues :

Update to version 2.6.5: Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Updated rails and puma dependencies for security fixes.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

Version 2.6.5

Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Version 2.6.4

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Version 2.6.3

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Version 2.6.2

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Version 2.6.1

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Version 2.6.0

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Version 2.5.20

Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

Version 2.5.19

RMT now has the ability to remove local systems with the command `rmt-cli systems remove`.

Version 2.5.18

Fixed exit code for `rmt-cli mirror` and its subcommands. Now it exits with 1 whenever an error occurs during mirroring

Improved message logging for `rtm-cli mirror`. Instead of logging an error when it occurs, the command summarize all errors at the end of execution. Now log messages have colors to better identify failure/success.

Version 2.5.17

RMT no longer provides the installer updates repository to systems via its zypper service. This repository is used during the installation process, as it provides an up-to-date installation experience, but it has no use on an already installed system.

Version 2.5.16

Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

Version 2.5.15

RMT now checks if repositories are fully mirrored during the activation process. Previously, RMT only checked if the repositories were enabled to be mirrored, but not that they were actually mirrored.
In this case, RMTs were not able to provide the repository data which systems assumed it had.

Version 2.5.14

Enable 'Installer-Updates' repositories by default

Fixed deprecation warning when thor encountered an error. Also, instead of returning 0 for thor errors, rmt-cli will return 1 instead.

Version 2.5.13

Added `rmt-cli repos clean` command to remove locally mirrored files of repositories which are not marked to be mirrored.

Previously, RMT didn't track deduplicated files in its database. Now, to accommodate `rmt-cli repos clean`, RMT will track all mirrored files.

Move the nginx reload to the configuration package which contain nginx config files, don't reload nginx unconditionally from main package.

Version 2.5.12

Update rack to version 2.2.3 (CVE-2020-8184: bsc#1173351)

Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

Version 2.5.11

rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

Version 2.5.10

Support rmt-server to run with Ruby 2.7 (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

Move nginx/vhosts.d directory to correct sub-package. They are needed together with nginx, not rmt-server.

Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

Version 2.5.9

rmt-server-pubcloud: enforce strict authentication

Version 2.5.8

Use repomd_parser gem to remove repository metadata parsing code.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

Version 2.6.5

Solved potential bug of SCC repository URLs changing over time. RMT now self heals by removing the previous invalid repository and creating the correct one.

Version 2.6.4

Add web server settings to /etc/rmt.conf: Now it's possible to configure the minimum and maximum threads count as well the number of web server workers to be booted through /etc/rmt.conf.

Version 2.6.3

Instead of using an MD5 of URLs for custom repository friendly_ids, RMT now builds an ID from the name.

Version 2.6.2

Fix RMT file caching based on timestamps: Previously, RMT sent GET requests with the header 'If-Modified-Since' to a repository server and if the response had a 304 (Not Modified), it would copy a file from the local cache instead of downloading. However, if the local file timestamp accidentally changed to a date newer than the one on the repository server, RMT would have an outdated file, which caused some errors. Now, RMT makes HEAD requests to the repositories servers and inspect the 'Last-Modified' header to decide whether to download a file or copy it from cache, by comparing the equalness of timestamps.

Version 2.6.1

Fixed an issue where relative paths supplied to `rmt-cli import repos` caused the command to fail.

Version 2.6.0

Friendlier IDs for custom repositories: In an effort to simplify the handling of SCC and custom repositories, RMT now has friendly IDs. For SCC repositories, it's the same SCC ID as before. For custom repositories, it can either be user provided or RMT generated (MD5 of the provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

Version 2.5.20

Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

Version 2.5.19

RMT now has the ability to remove local systems with the command `rmt-cli systems remove`.

Version 2.5.18

Fixed exit code for `rmt-cli mirror` and its subcommands. Now it exits with 1 whenever an error occurrs during mirroring

Improved message logging for `rtm-cli mirror`. Instead of logging an error when it occurs, the command summarize all errors at the end of execution. Now log messages have colors to better identify failure/success.

Version 2.5.17

RMT no longer provides the installer updates repository to systems via its zypper service. This repository is used during the installation process, as it provides an up-to-date installation experience, but it has no use on an already installed system.

Version 2.5.16

Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

Version 2.5.15

RMT now checks if repositories are fully mirrored during the activation process. Previously, RMT only checked if the repositories were enabled to be mirrored, but not that they were actually mirrored.
In this case, RMTs were not able to provide the repository data which systems assumed it had.

Version 2.5.14

Enable 'Installer-Updates' repositories by default

Fixed deprecation warning when thor encountered an error. Also, instead of returning 0 for thor errors, rmt-cli will return 1 instead.

Version 2.5.13

Added `rmt-cli repos clean` command to remove locally mirrored files of repositories which are not marked to be mirrored.

Previously, RMT didn't track deduplicated files in its database. Now, to accommodate `rmt-cli repos clean`, RMT will track all mirrored files.

Move the nginx reload to the configuration package which contain nginx config files, don't reload nginx unconditionally from main package.

Version 2.5.12

Update rack to version 2.2.3 (CVE-2020-8184: bsc#1173351)

Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

Version 2.5.11

rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

Version 2.5.10

Support rmt-server to run with Ruby 2.7 (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

Move nginx/vhosts.d directory to correct sub-package. They are needed together with nginx, not rmt-server.

Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

Version 2.5.9

rmt-server-pubcloud: enforce strict authentication

Version 2.5.8

Use repomd_parser gem to remove repository metadata parsing code.

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for rmt-server fixes the following issues :

  - Version 2.6.5

  - Solved potential bug of SCC repository URLs changing     over time. RMT now self heals by removing the previous     invalid repository and creating the correct one.

  - Version 2.6.4

  - Add web server settings to /etc/rmt.conf: Now it's     possible to configure the minimum and maximum threads     count as well the number of web server workers to be     booted through /etc/rmt.conf.

  - Version 2.6.3

  - Instead of using an MD5 of URLs for custom repository     friendly_ids, RMT now builds an ID from the name.

  - Version 2.6.2

  - Fix RMT file caching based on timestamps: Previously,     RMT sent GET requests with the header     'If-Modified-Since' to a repository server and if the     response had a 304 (Not Modified), it would copy a file     from the local cache instead of downloading. However, if     the local file timestamp accidentally changed to a date     newer than the one on the repository server, RMT would     have an outdated file, which caused some errors. Now,     RMT makes HEAD requests to the repositories servers and     inspect the 'Last-Modified' header to decide whether to     download a file or copy it from cache, by comparing the     equalness of timestamps.



  - Version 2.6.1

  - Fixed an issue where relative paths supplied to `rmt-cli     import repos` caused the command to fail.

  - Version 2.6.0

  - Friendlier IDs for custom repositories: In an effort to     simplify the handling of SCC and custom repositories,     RMT now has friendly IDs. For SCC repositories, it's the     same SCC ID as before. For custom repositories, it can     either be user provided or RMT generated (MD5 of the     provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

  - Version 2.5.20

  - Updated rails from 6.0.3.2 to 6.0.3.3 :

  - actionview (CVE-2020-15169)

  - Version 2.5.19

  - RMT now has the ability to remove local systems with the     command `rmt-cli systems remove`.

  - Version 2.5.18

  - Fixed exit code for `rmt-cli mirror` and its     subcommands. Now it exits with 1 whenever an error     occurs during mirroring

  - Improved message logging for `rtm-cli mirror`. Instead     of logging an error when it occurs, the command     summarize all errors at the end of execution. Now log     messages have colors to better identify failure/success.

  - Version 2.5.17

  - RMT no longer provides the installer updates repository     to systems via its zypper service. This repository is     used during the installation process, as it provides an     up-to-date installation experience, but it has no use on     an already installed system.

  - Version 2.5.16

  - Updated RMT's rails and puma dependencies.

  - puma (CVE-2020-11076, CVE-2020-11077, CVE-2020-5249,     CVE-2020-5247 CVE-2019-16770)

  - actionpack (CVE-2020-8185, CVE-2020-8164, CVE-2020-8166)

  - actionview (CVE-2020-8167, CVE-2020-5267, CVE-2019-5418,     CVE-2019-5419)

  - activesupport (CVE-2020-8165)

  - railties (CVE-2019-5420)

  - Version 2.5.15

  - RMT now checks if repositories are fully mirrored during     the activation process. Previously, RMT only checked if     the repositories were enabled to be mirrored, but not     that they were actually mirrored. In this case, RMTs     were not able to provide the repository data which     systems assumed it had.

  - Version 2.5.14

  - Enable 'Installer-Updates' repositories by default

  - Fixed deprecation warning when thor encountered an     error. Also, instead of returning 0 for thor errors,     rmt-cli will return 1 instead.

  - Version 2.5.13

  - Added `rmt-cli repos clean` command to remove locally     mirrored files of repositories which are not marked to     be mirrored.

  - Previously, RMT didn't track deduplicated files in its     database. Now, to accommodate `rmt-cli repos clean`, RMT     will track all mirrored files.

  - Move the nginx reload to the configuration package which     contain nginx config files, don't reload nginx     unconditionally from main package.

  - Version 2.5.12

  - Update rack to version 2.2.3 (CVE-2020-8184:
    bsc#1173351)

  - Update Rails to version 5.2.4.3 :

  - actionpack (CVE-2020-8164: bsc#1172177)

  - actionpack (CVE-2020-8166: bsc#1172182)

  - activesupport (CVE-2020-8165: bsc#1172186)

  - actionview (CVE-2020-8167: bsc#1172184)

  - Version 2.5.11

  - rmt-server-pubcloud :

  - SLES11 EOL

  - Extension activation verification based on the available     subscriptions

  - Added a manual instance verification script

  - Version 2.5.10

  - Support rmt-server to run with Ruby 2.7     (Factory/Tumbleweed) :

  - Bump gem 'config' version from 1.7.2 to 2.2.1 to fix     incompatibility Ruby 2.7 OpenStruct class;

  - Bump gem 'typhoeus' version from 1.3.1 to 1.4.0 in order     to also bump gem 'ethon' version, which caused a     'rb_safe_level' warning on Ruby 2.7;

  - Fix 'last arg as keyword arg' Ruby 2.7 warning on source     code;

  - Disable 'deprecated' warnings from Ruby 2.7; Rails 5.1     generates a lot of warnings with Ruby 2.7, mainly due to     'capturing the given block with Proc.new', which is     deprecated;

  - Improve RPM spec to consider only the distribution     default Ruby version configured in OBS;

  - Improve RPM spec to remove Ruby 2.7 warnings regarding     'bundler.

  - Move nginx/vhosts.d directory to correct sub-package.
    They are needed together with nginx, not rmt-server.

  - Fix dependencies especially for containerized usage :

  - mariadb and nginx are not hard requires, could run on     another host

  - Fix generic dependencies :

  - systemd ordering was missing

  - shadow is required for pre-install

  - Version 2.5.9

  - rmt-server-pubcloud: enforce strict authentication

  - Version 2.5.8

  - Use repomd_parser gem to remove repository metadata     parsing code.

This update was imported from the SUSE:SLE-15-SP1:Update update project.

This update for rmt-server fixes the following issues :

Update to version 2.6.5 :

  - Solved potential bug of SCC repository URLs changing     over time. RMT now self heals by removing the previous     invalid repository and creating the correct one.

  - Add web server settings to /etc/rmt.conf: Now it's     possible to configure the minimum and maximum threads     count as well the number of web server workers to be     booted through /etc/rmt.conf.

  - Instead of using an MD5 of URLs for custom repository     friendly_ids, RMT now builds an ID from the name.

  - Fix RMT file caching based on timestamps: Previously,     RMT sent GET requests with the header     'If-Modified-Since' to a repository server and if the     response had a 304 (Not Modified), it would copy a file     from the local cache instead of downloading. However, if     the local file timestamp accidentally changed to a date     newer than the one on the repository server, RMT would     have an outdated file, which caused some errors. Now,     RMT makes HEAD requests to the repositories servers and     inspect the 'Last-Modified' header to decide whether to     download a file or copy it from cache, by comparing the     equalness of timestamps.

  - Fixed an issue where relative paths supplied to `rmt-cli     import repos` caused the command to fail.

  - Friendlier IDs for custom repositories: In an effort to     simplify the handling of SCC and custom repositories,     RMT now has friendly IDs. For SCC repositories, it's the     same SCC ID as before. For custom repositories, it can     either be user provided or RMT generated (MD5 of the     provided URL). Benefits :

  - `rmt-cli mirror repositories` now works for custom     repositories.

  - Custom repository IDs can be the same across RMT     instances.

  - No more confusing 'SCC ID' vs 'ID' in `rmt-cli` output.
    Deprecation Warnings :

  - RMT now uses a different ID for custom repositories than     before. RMT still supports that old ID, but it's     recommended to start using the new ID to ensure future     compatibility.

  - Updated rails and puma dependencies for security fixes.

This update was imported from the SUSE:SLE-15-SP2:Update update project.

This update for rubygem-activesupport-5_1 fixes the following issues :

  - CVE-2020-8165: Fixed deserialization of untrusted data     in MemCacheStore potentially resulting in remote code     execution (bsc#1172186)

This update was imported from the SUSE:SLE-15:Update update project.

Multiple security issues were discovered in the Rails web framework which could result in cross-site scripting, information leaks, code execution, cross-site request forgery or bypass of upload limits.

Multiple vulnerabilities were found in Ruby on Rails, a MVC ruby-based framework geared for web application development, which could lead to remote code execution and untrusted user input usage, depending on the application.

CVE-2020-8163

A code injection vulnerability in Rails would allow an attacker who controlled the `locals` argument of a `render` call to perform a RCE.

CVE-2020-8164

A deserialization of untrusted data vulnerability exists in rails which can allow an attacker to supply information can be inadvertently leaked from Strong Parameters.

CVE-2020-8165

A deserialization of untrusted data vulnernerability exists in rails that can allow an attacker to unmarshal user-provided objects in MemCacheStore and RedisCacheStore potentially resulting in an RCE.

For Debian 9 stretch, these problems have been fixed in version 2:4.2.7.1-1+deb9u3.

We recommend that you upgrade your rails packages.

For the detailed security status of rails please refer to its security tracker page at: https://security-tracker.debian.org/tracker/rails

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Two vulnerabilities were found in Ruby on Rails, a MVC ruby-based framework geared for web application development, which could lead to remote code execution and untrusted user input usage, depending on the application.

CVE-2020-8164

Strong parameters bypass vector in ActionPack. In some cases user supplied information can be inadvertently leaked from Strong Parameters. Specifically the return value of `each`, or `each_value`, or `each_pair` will return the underlying 'untrusted' hash of data that was read from the parameters. Applications that use this return value may be inadvertently use untrusted user input.

CVE-2020-8165

Potentially unintended unmarshalling of user-provided objects in MemCacheStore. There is potentially unexpected behaviour in the MemCacheStore where, when untrusted user input is written to the cache store using the `raw: true` parameter, re-reading the result from the cache can evaluate the user input as a Marshalled object instead of plain text. Unmarshalling of untrusted user input can have impact up to and including RCE. At a minimum, this vulnerability allows an attacker to inject untrusted Ruby objects into a web application.

In addition to upgrading to the latest versions of Rails, developers should ensure that whenever they are calling `Rails.cache.fetch` they are using consistent values of the `raw` parameter for both reading and writing.

For Debian 8 'Jessie', these problems have been fixed in version 2:4.1.8-1+deb8u7.

We recommend that you upgrade your rails packages.

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Ruby on Rails blog :

Hi everyone! Rails 5.2.4.3 and 6.0.3.1 have been released! These releases contain important security fixes, so please upgrade when you can.

Both releases contain the following fixes :

CVE-2020-8162: Circumvention of file size limits in ActiveStorage

CVE-2020-8164: Possible Strong Parameters Bypass in ActionPack

CVE-2020-8165: Potentially unintended unmarshalling of user-provided objects in MemCacheStore and RedisCacheStore

CVE-2020-8166: Ability to forge per-form CSRF tokens given a global CSRF token

CVE-2020-8167: CSRF Vulnerability in rails-ujs

ID	Name	Product	Family	Type	Severity
316132	Unity Linux 20.1050e / 20.1060e / 20.1070-8ae / 20.1070e Security Update: rubygem-rails (UTSA-2026-016651)	Nessus	Unity Linux Local Security Checks	Local	critical
253573	Linux Distros Unpatched Vulnerability : CVE-2020-8165	Nessus	Misc.	Local	critical
423528	SCA: security update for activesupport (GHSA-2p68-f74v-9wc6)	Tenable Cloud Security	SCA Checks	Local	critical
423528	SCA: security update for activesupport (GHSA-2p68-f74v-9wc6)	Tenable Self-Hosted Container Security	SCA Checks	Local	critical
148903	RHEL 7 : Satellite 6.9 Release (Moderate) (RHSA-2021:1313)	Nessus	Red Hat Local Security Checks	Local	critical
143751	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3036-1)	Nessus	SuSE Local Security Checks	Local	critical
143623	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3160-1)	Nessus	SuSE Local Security Checks	Local	critical
143622	SUSE SLES15 Security Update : rmt-server (SUSE-SU-2020:3147-1)	Nessus	SuSE Local Security Checks	Local	critical
143225	openSUSE Security Update : rmt-server (openSUSE-2020-2000)	Nessus	SuSE Local Security Checks	Local	critical
143190	openSUSE Security Update : rmt-server (openSUSE-2020-1993)	Nessus	SuSE Local Security Checks	Local	critical
141523	openSUSE Security Update : rubygem-activesupport-5_1 (openSUSE-2020-1679)	Nessus	SuSE Local Security Checks	Local	critical
141506	openSUSE Security Update : rubygem-activesupport-5_1 (openSUSE-2020-1677)	Nessus	SuSE Local Security Checks	Local	critical
140796	Debian DSA-4766-1 : rails - security update	Nessus	Debian Local Security Checks	Local	critical
138781	Debian DLA-2282-1 : rails security update	Nessus	Debian Local Security Checks	Local	critical
137670	Debian DLA-2251-1 : rails security update	Nessus	Debian Local Security Checks	Local	critical
136726	FreeBSD : Rails -- multiple vulnerabilities (85fca718-99f6-11ea-bf1d-08002728f74c)	Nessus	FreeBSD Local Security Checks	Local	critical

Detections

Analytics

CVE-2020-8165

critical

Tenable Plugins

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical