In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the user-supplied stride value is trusted for buffer calculations.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

Note that Nessus relies on the presence of the package as reported by the vendor.

The remote Alibaba Cloud Linux 3 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALINUX3-SA-2022:0012 advisory.

    Package updates are available for Alibaba Cloud Linux 3 that fix the following vulnerabilities:

    CVE-2019-16865:
    An issue was discovered in Pillow before 6.2.0. When reading specially crafted invalid image files, the     library can either allocate very large amounts of memory or take an extremely long period of time to     process the image.

    CVE-2020-11538:
    In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing     of SGI image files, a different issue than CVE-2020-5311.

    CVE-2020-35655:
    In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled.

    CVE-2020-5311:
    libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an SGI buffer overflow.

    CVE-2020-5313:
    libImaging/FliDecode.c in Pillow before 6.2.2 has an FLI buffer overflow.

    CVE-2021-27921:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large.

    CVE-2021-27923:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large.

    CVE-2021-28676:
    An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load.

    CVE-2021-28678:
    An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data.

    CVE-2021-34552:
    Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.

    CVE-2022-22816:
    path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of     ImagePath.Path.

    CVE-2020-35653:
    In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. A flaw was found in python-pillow. The     PcxDecode in Pillow has a buffer over-read when decoding a crafted PCX file due to the user-supplied     stride value trusted for buffer calculations. The highest threat from this vulnerability is to system     availability.

    CVE-2021-25287:
    An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_graya_la. There is an out-of-bounds read in J2kDecode in j2ku_graya_la. For J2k images with multiple     bands, its legal to have different widths for each band, e.g. 1 byte for L, 4 bytes for A.

    CVE-2021-25288:
    An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.There is an out-of-bounds read in J2kDecode in j2ku_gray_i. For J2k images with multiple     bands, its legal to have different widths for each band, e.g. 1 byte for L, 4 bytes for A.

    CVE-2021-25290:
    An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. A flaw was found in python-pillow. In TiffDecode.c, there is a negative-offset memcpy with     an invalid size which could lead to a system crash.

    CVE-2021-25292:
    An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. A flaw was found in python-     pillow. The PDF parser has a catastrophic backtracking regex that could be used as a DOS attack.

    CVE-2021-25293:
    An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c. A flaw     was found in python-pillow. There is an Out of Bounds Read in SGIRleDecode.c.

    CVE-2021-27922:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. A flaw was found in python-pillow. Attackers can cause a denial of     service (memory consumption) because the reported size of a contained image is not properly checked for an     ICNS container, and thus an attempted memory allocation can be very large.

    CVE-2021-28675:
    An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. A flaw was found in python-pillow. PsdImagePlugin.PsdImageFile does not sanity check     the number of input layers with regard to the size of the data block which could lead to a denial-of-     service.

    CVE-2021-28677     An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening. A flaw was     found in python-pillow. The readline used in EPS has to deal with any combination of \r and \n as line     endings. It accidentally used a quadratic method of accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a denial-of-service of Pillow in the open phase, before an     image was accepted for opening.

    CVE-2022-22817:
    PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that     use the Python exec method.

Tenable has extracted the preceding description block directly from the Alibaba Cloud Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of python-pillow installed on the remote host is prior to 2.0.0-23.gitd1c6db8. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2023-2083 advisory.

    Pillow before 2.7.0 allows remote attackers to cause a denial of service via a compressed text chunk in a     PNG image that has a large size when it is decompressed. (CVE-2014-9601)

    Pillow before 3.3.2 allows context-dependent attackers to execute arbitrary code by using the crafted     image file approach, related to an Insecure Sign Extension issue affecting the ImagingNew in Storage.c     component. (CVE-2016-9190)

    In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

    An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

    An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

    Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Tenable has extracted the preceding description block directly from the tested product security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Rocky Linux 8 host has packages installed that are affected by a vulnerability as referenced in the RLSA-2021:4149 advisory.

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote AlmaLinux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the ALSA-2021:4149 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_graya_la. (CVE-2021-25287)

  - An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_gray_i. (CVE-2021-25288)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. (CVE-2021-25292)

  - An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
    (CVE-2021-25293)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large. (CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large. (CVE-2021-27923)

  - An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. (CVE-2021-28675)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data. (CVE-2021-28678)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the RHSA-2021:4149 advisory.

    The python-pillow packages contain a Python image processing library that provides extensive file format     support, an efficient internal representation, and powerful image-processing capabilities.

    Security Fix(es):

    * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287)

    * python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25288)

    * python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)

    * python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)

    * python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)

    * python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)

    * python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)

    * python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)

    * python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)

    * python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)

    * python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)

    * python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)

    * python-pillow: Buffer overflow in image convert function (CVE-2021-34552)

    * python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)

    * python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Additional Changes:

    For detailed information on changes in this release, see the Red Hat Enterprise Linux 8.5 Release Notes     linked from the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote CentOS Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the CESA-2021:4149 advisory.

  - python-pillow: Buffer over-read in PCX image reader (CVE-2020-35653)

  - python-pillow: Buffer over-read in SGI RLE image reader (CVE-2020-35655)

  - python-pillow: Out-of-bounds read in J2K image reader (CVE-2021-25287, CVE-2021-25288)

  - python-pillow: Negative-offset memcpy in TIFF image reader (CVE-2021-25290)

  - python-pillow: Regular expression DoS in PDF format parser (CVE-2021-25292)

  - python-pillow: Out-of-bounds read in SGI RLE image reader (CVE-2021-25293)

  - python-pillow: Excessive memory allocation in BLP image reader (CVE-2021-27921)

  - python-pillow: Excessive memory allocation in ICNS image reader (CVE-2021-27922)

  - python-pillow: Excessive memory allocation in ICO image reader (CVE-2021-27923)

  - python-pillow: Excessive memory allocation in PSD image reader (CVE-2021-28675)

  - python-pillow: Infinite loop in FLI image reader (CVE-2021-28676)

  - python-pillow: Excessive CPU use in EPS image reader (CVE-2021-28677)

  - python-pillow: Excessive looping in BLP image reader (CVE-2021-28678)

  - python-pillow: Buffer overflow in image convert function (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SUSE15 host has packages installed that are affected by multiple vulnerabilities as referenced in the openSUSE-SU-2021:1134-1 advisory.

  - Heap buffer overflow in Freetype in Google Chrome prior to 86.0.4240.111 allowed a remote attacker to     potentially exploit heap corruption via a crafted HTML page. (CVE-2020-15999)

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files     because of certain interpretation conflicts with LibTIFF in RGBA mode. (CVE-2020-35654)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

  - An issue was discovered in Pillow before 8.1.1. TiffDecode has a heap-based buffer overflow when decoding     crafted YCbCr files because of certain interpretation conflicts with LibTIFF in RGBA mode. NOTE: this     issue exists because of an incomplete fix for CVE-2020-35654. (CVE-2021-25289)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is an out-of-bounds read in     TiffreadRGBATile via invalid tile boundaries. (CVE-2021-25291)

  - An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. (CVE-2021-25292)

  - An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c.
    (CVE-2021-25293)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large. (CVE-2021-27921)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. (CVE-2021-27922)

  - Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large. (CVE-2021-27923)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Debian 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-2716 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. (CVE-2021-25290)

  - An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load. (CVE-2021-28676)

  - An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening.
    (CVE-2021-28677)

  - Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.
    (CVE-2021-34552)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - An issue was discovered in Pillow before 8.1.1. In     TiffDecode.c, there is a negative-offset memcpy with an     invalid size.(CVE-2021-25290)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - libImaging/FliDecode.c in Pillow before 6.2.2 has an     FLI buffer overflow.(CVE-2020-5313)

  - An out-of-bounds write flaw was discovered in     python-pillow in the way SGI RLE images are decoded. An     application that uses python-pillow to decode untrusted     images may be vulnerable to this flaw, which can allow     an attacker to crash the application or potentially     execute code on the system.(CVE-2020-5311)

  - libImaging/PcxDecode.c in Pillow before 6.2.2 has a PCX     P mode buffer overflow.(CVE-2020-5312)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

  - ** RESERVED ** This candidate has been reserved by an     organization or individual that will use it when     announcing a new security problem. When the candidate     has been publicized, the details for this candidate     will be provided.(CVE-2020-19911)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - Pillow before 2.7.0 allows remote attackers to cause a     denial of service via a compressed text chunk in a PNG     image that has a large size when it is     decompressed.(CVE-2014-9601)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 2.7.0 allows remote attackers to cause a     denial of service via a compressed text chunk in a PNG     image that has a large size when it is     decompressed.(CVE-2014-9601)

  - in Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - Pillow before 2.7.0 allows remote attackers to cause a     denial of service via a compressed text chunk in a PNG     image that has a large size when it is     decompressed.(CVE-2014-9601)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities :

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - Pillow before 2.7.0 allows remote attackers to cause a     denial of service via a compressed text chunk in a PNG     image that has a large size when it is     decompressed.(CVE-2014-9601)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - libImaging/FliDecode.c in Pillow before 6.2.2 has an     FLI buffer overflow.(CVE-2020-5313)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - An out-of-bounds write flaw was discovered in     python-pillow in the way SGI RLE images are decoded. An     application that uses python-pillow to decode untrusted     images may be vulnerable to this flaw, which can allow     an attacker to crash the application or potentially     execute code on the system.(CVE-2020-5311)

  - libImaging/PcxDecode.c in Pillow before 6.2.2 has a PCX     P mode buffer overflow.(CVE-2020-5312)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - An issue was discovered in Pillow before 6.2.0. When     reading specially crafted invalid image files, the     library can either allocate very large amounts of     memory or take an extremely long period of time to     process the image.(CVE-2019-16865)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Fedora 32 host has a package installed that is affected by multiple vulnerabilities as referenced in the FEDORA-2021-880aa7bd27 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files     because of certain interpretation conflicts with LibTIFF in RGBA mode. (CVE-2020-35654)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Fedora 33 host has packages installed that are affected by multiple vulnerabilities as referenced in the FEDORA-2021-a8ddc1ce70 advisory.

  - In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. (CVE-2020-35653)

  - In Pillow before 8.1.0, TiffDecode has a heap-based buffer overflow when decoding crafted YCbCr files     because of certain interpretation conflicts with LibTIFF in RGBA mode. (CVE-2020-35654)

  - In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled. (CVE-2020-35655)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4697-1 advisory.

    It was discovered that Pillow incorrectly handled certain PCX image files. If a user or automated system     were tricked into opening a specially-crafted PCX file, a remote attacker could possibly cause Pillow to     crash, resulting in a denial of service. (CVE-2020-35653)

    It was discovered that Pillow incorrectly handled certain Tiff image files. If a user or automated system     were tricked into opening a specially-crafted Tiff file, a remote attacker could cause Pillow to crash,     resulting in a denial of service, or possibly execute arbitrary code. This issue only affected Ubuntu     20.04 LTS and Ubuntu 20.10. (CVE-2020-35654)

    It was discovered that Pillow incorrectly handled certain SGI image files. If a user or automated system     were tricked into opening a specially-crafted SGI file, a remote attacker could possibly cause Pillow to     crash, resulting in a denial of service. This issue only affected Ubuntu 18.04 LTS, Ubuntu 20.04 LTS, and     Ubuntu 20.10. (CVE-2020-35655)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host is affected by the vulnerability described in GLSA-202101-08 (Pillow: Multiple vulnerabilities)

    Multiple vulnerabilities have been discovered in Pillow. Please review       the CVE identifiers referenced below for details.
  Impact :

    Please review the referenced CVE identifiers for details.
  Workaround :

    There is no known workaround at this time.

ID	Name	Product	Family	Severity
250973	Linux Distros Unpatched Vulnerability : CVE-2020-35653	Nessus	Misc.	high
236661	Alibaba Cloud Linux 3 : 0012: python-pillow (ALINUX3-SA-2022:0012)	Nessus	Alibaba Cloud Linux Local Security Checks	critical
176924	Amazon Linux 2 : python-pillow (ALAS-2023-2083)	Nessus	Amazon Linux Local Security Checks	critical
157787	Rocky Linux 8 : python-pillow (RLSA-2021:4149)	Nessus	Rocky Linux Local Security Checks	critical
157623	AlmaLinux 8 : python-pillow (ALSA-2021:4149)	Nessus	Alma Linux Local Security Checks	critical
155178	RHEL 8 : python-pillow (RHSA-2021:4149)	Nessus	Red Hat Local Security Checks	critical
155033	CentOS 8 : python-pillow (CESA-2021:4149)	Nessus	CentOS Local Security Checks	critical
152473	openSUSE 15 Security Update : python-CairoSVG, python-Pillow (openSUSE-SU-2021:1134-1)	Nessus	SuSE Local Security Checks	critical
152012	Debian DLA-2716-1 : pillow - LTS security update	Nessus	Debian Local Security Checks	critical
149119	EulerOS 2.0 SP3 : python-pillow (EulerOS-SA-2021-1840)	Nessus	Huawei Local Security Checks	high
148586	EulerOS Virtualization 2.9.0 : python-pillow (EulerOS-SA-2021-1743)	Nessus	Huawei Local Security Checks	critical
148585	EulerOS Virtualization 2.9.1 : python-pillow (EulerOS-SA-2021-1729)	Nessus	Huawei Local Security Checks	critical
148071	EulerOS 2.0 SP5 : python-pillow (EulerOS-SA-2021-1702)	Nessus	Huawei Local Security Checks	high
147492	EulerOS Virtualization for ARM 64 3.0.2.0 : python-pillow (EulerOS-SA-2021-1383)	Nessus	Huawei Local Security Checks	high
147468	EulerOS Virtualization 3.0.2.6 : python-pillow (EulerOS-SA-2021-1421)	Nessus	Huawei Local Security Checks	high
147058	EulerOS Virtualization for ARM 64 3.0.6.0 : python-pillow (EulerOS-SA-2021-1570)	Nessus	Huawei Local Security Checks	high
147028	EulerOS Virtualization 3.0.6.6 : python-pillow (EulerOS-SA-2021-1515)	Nessus	Huawei Local Security Checks	high
146723	EulerOS 2.0 SP2 : python-pillow (EulerOS-SA-2021-1353)	Nessus	Huawei Local Security Checks	high
146238	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-1273)	Nessus	Huawei Local Security Checks	critical
146225	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-1254)	Nessus	Huawei Local Security Checks	critical
145750	EulerOS 2.0 SP8 : python-pillow (EulerOS-SA-2021-1167)	Nessus	Huawei Local Security Checks	high
145337	Fedora 32 : python-pillow (2021-880aa7bd27)	Nessus	Fedora Local Security Checks	high
145235	Fedora 33 : mingw-python-pillow / python-pillow (2021-a8ddc1ce70)	Nessus	Fedora Local Security Checks	high
145048	Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS : Pillow vulnerabilities (USN-4697-1)	Nessus	Ubuntu Local Security Checks	high
144867	GLSA-202101-08 : Pillow: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	high

Detections

Analytics

CVE-2020-35653

high

Tenable Plugins

high

critical

critical

critical

critical

critical

critical

critical

critical

high

critical

critical

high

high

high

high

high

high

critical

critical

high

high

high

high

high