iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose unrelated information from process memory to an attacker.

The remote Rocky Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RLSA-2021:1762 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - A double free memory issue was found to occur in the libvirt API, in versions before 6.8.0, responsible     for requesting information about network interfaces of a running QEMU domain. This flaw affects the polkit     access control driver. Specifically, clients connecting to the read-write socket with limited ACL     permissions could use this flaw to crash the libvirt daemon, resulting in a denial of service, or     potentially escalate their privileges on the system. The highest threat from this vulnerability is to data     confidentiality and integrity as well as system availability. (CVE-2020-25637)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote AlmaLinux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALSA-2021:1762 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - A double free memory issue was found to occur in the libvirt API, in versions before 6.8.0, responsible     for requesting information about network interfaces of a running QEMU domain. This flaw affects the polkit     access control driver. Specifically, clients connecting to the read-write socket with limited ACL     permissions could use this flaw to crash the libvirt daemon, resulting in a denial of service, or     potentially escalate their privileges on the system. The highest threat from this vulnerability is to data     confidentiality and integrity as well as system availability. (CVE-2020-25637)

  - ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate is a duplicate of CVE-2020-28916     (CVE-2020-25707)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-1762 advisory.

  - A double free memory issue was found to occur in the libvirt API, in versions before 6.8.0, responsible     for requesting information about network interfaces of a running QEMU domain. This flaw affects the polkit     access control driver. Specifically, clients connecting to the read-write socket with limited ACL     permissions could use this flaw to crash the libvirt daemon, resulting in a denial of service, or     potentially escalate their privileges on the system. The highest threat from this vulnerability is to data     confidentiality and integrity as well as system availability. (CVE-2020-25637)

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate is a duplicate of CVE-2020-28916     (CVE-2020-25707)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES11 host has a package installed that is affected by multiple vulnerabilities as referenced in the SUSE-SU-2021:14772-1 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU before 07-20-2020 has a buffer overflow. This     occurs during packet transmission and affects the highbank and midway emulated machines. A guest user or     process could use this flaw to crash the QEMU process on the host, resulting in a denial of service or     potential privileged code execution. This was fixed in commit 5519724a13664b43e225ca05351c60b4468e4555.
    (CVE-2020-15863)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the bootp_input() function and could occur while processing a udp packet that is smaller than     the size of the 'bootp_t' structure. A malicious guest could use this flaw to leak 10 bytes of     uninitialized heap memory from the host. The highest threat from this vulnerability is to data     confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3592)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the udp_input() function and could occur while processing a udp packet that is smaller than the     size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3594)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of qemu installed on the remote host is prior to 3.1.0-8. It is, therefore, affected by multiple vulnerabilities as referenced in the ALAS2-2021-1671 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate is a duplicate of CVE-2020-28916     (CVE-2020-25707)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the CESA-2021:1762 advisory.

  - QEMU: heap buffer overflow in iscsi_aio_ioctl_cb() in block/iscsi.c may lead to information disclosure     (CVE-2020-11947)

  - QEMU: reachable assertion failure in net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c (CVE-2020-16092)

  - libvirt: double free in qemuAgentGetInterfaces() in qemu_agent.c (CVE-2020-25637)

  - QEMU: infinite loop in e1000e_write_packet_to_guest() in hw/net/e1000e_core.c (CVE-2020-25707)

  - QEMU: assertion failure through usb_packet_unmap() in hw/usb/hcd-ehci.c (CVE-2020-25723)

  - QEMU: heap buffer overflow in msix_table_mmio_write() in hw/pci/msix.c (CVE-2020-27821)

  - QEMU: e1000e: infinite loop scenario in case of null packet descriptor (CVE-2020-28916)

  - CVE-2020-29130 QEMU: slirp: out-of-bounds access while processing ARP/NCSI packets (CVE-2020-29129)

  - CVE-2020-29129  QEMU: slirp: out-of-bounds access while processing ARP/NCSI packets (CVE-2020-29130)

  - QEMU: ide: atapi: OOB access while processing read commands (CVE-2020-29443)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:1762 advisory.

  - QEMU: heap buffer overflow in iscsi_aio_ioctl_cb() in block/iscsi.c may lead to information disclosure     (CVE-2020-11947)

  - QEMU: reachable assertion failure in net_tx_pkt_add_raw_fragment() in hw/net/net_tx_pkt.c (CVE-2020-16092)

  - libvirt: double free in qemuAgentGetInterfaces() in qemu_agent.c (CVE-2020-25637)

  - QEMU: infinite loop in e1000e_write_packet_to_guest() in hw/net/e1000e_core.c (CVE-2020-25707)

  - QEMU: assertion failure through usb_packet_unmap() in hw/usb/hcd-ehci.c (CVE-2020-25723)

  - QEMU: heap buffer overflow in msix_table_mmio_write() in hw/pci/msix.c (CVE-2020-27821)

  - QEMU: e1000e: infinite loop scenario in case of null packet descriptor (CVE-2020-28916)

  - CVE-2020-29130 QEMU: slirp: out-of-bounds access while processing ARP/NCSI packets (CVE-2020-29129)

  - CVE-2020-29129  QEMU: slirp: out-of-bounds access while processing ARP/NCSI packets (CVE-2020-29130)

  - QEMU: ide: atapi: OOB access while processing read commands (CVE-2020-29443)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Drop the 'ampersand 0x25 shift altgr' line in pt-br keymap file (bsc#1129962)

Fix migration failure with error message: 'error while loading state section id 3(ram) (bsc#1154790)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb iehci packet handling (CVE-2020-25084, bsc#1176673)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Make note that this patch previously included addresses (CVE-2020-13765 bsc#1172478)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix vfio-pci device on s390 enters error state (bsc#1179725)

Fix PCI devices are unavailable after a subsystem reset. (bsc#1179726)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-9109 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - In QEMU 4.1.0, an out-of-bounds read flaw was found in the ATI VGA implementation. It occurs in the     ati_cursor_define() routine while handling MMIO write operations through the ati_mm_write() callback. A     malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.
    (CVE-2019-20808)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2021-9104 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - In QEMU 4.1.0, an out-of-bounds read flaw was found in the ATI VGA implementation. It occurs in the     ati_cursor_define() routine while handling MMIO write operations through the ati_mm_write() callback. A     malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.
    (CVE-2019-20808)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

This update for qemu fixes the following issues :

  - Fixed potential privilege escalation in virtfs     (CVE-2021-20181 bsc#1182137)

  - Fixed out-of-bound access in iscsi (CVE-2020-11947     bsc#1180523)

  - Fixed out-of-bound access in vmxnet3 emulation     (CVE-2021-20203 bsc#1181639)

  - Fixed out-of-bound access in ARM interrupt handling     (CVE-2021-20221 bsc#1181933)

  - Fixed vfio-pci device on s390 enters error state     (bsc#1179717 bsc#1179719)

  - Fixed 'Failed to try-restart qemu-ga@.service' error     while updating the qemu-guest-agent. (bsc#1178565)

  - Apply fixes to qemu scsi passthrough with respect to     timeout and error conditions, including using more     correct status codes. Add more qemu tracing which helped     track down these issues (bsc#1178049)

This update was imported from the SUSE:SLE-15-SP2:Update update project.

The remote Redhat Enterprise Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:0648 advisory.

  - QEMU: heap buffer overflow in iscsi_aio_ioctl_cb() in block/iscsi.c may lead to information disclosure     (CVE-2020-11947)

  - QEMU: assertion failure through usb_packet_unmap() in hw/usb/hcd-ehci.c (CVE-2020-25723)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

This update for qemu fixes the following issues :

Fixed potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fixed out-of-bound access in iscsi (CVE-2020-11947 bsc#1180523)

Fixed out-of-bound access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fixed out-of-bound access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Fixed vfio-pci device on s390 enters error state (bsc#1179717 bsc#1179719)

Fixed 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent. (bsc#1178565)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. Add more qemu tracing which helped track down these issues (bsc#1178049)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS / 20.10 host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4725-1 advisory.

  - iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose     unrelated information from process memory to an attacker. (CVE-2020-11947)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
184965	Rocky Linux 8 : virt:rhel and virt-devel:rhel (RLSA-2021:1762)	Nessus	Rocky Linux Local Security Checks	medium
157696	AlmaLinux 8 : virt:rhel and virt-devel:rhel (ALSA-2021:1762)	Nessus	Alma Linux Local Security Checks	medium
155325	Oracle Linux 8 : virt:ol / and / virt-devel:rhel (ELSA-2021-1762)	Nessus	Oracle Linux Local Security Checks	medium
152199	SUSE SLES11 Security Update : kvm (SUSE-SU-2021:14772-1)	Nessus	SuSE Local Security Checks	medium
150965	Amazon Linux 2 : qemu (ALAS-2021-1671)	Nessus	Amazon Linux Local Security Checks	medium
149772	CentOS 8 : virt:rhel and virt-devel:rhel (CESA-2021:1762)	Nessus	CentOS Local Security Checks	medium
149669	RHEL 8 : virt:rhel and virt-devel:rhel (RHSA-2021:1762)	Nessus	Red Hat Local Security Checks	medium
148966	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1305-1)	Nessus	SuSE Local Security Checks	high
148761	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1241-1)	Nessus	SuSE Local Security Checks	high
148758	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1240-1)	Nessus	SuSE Local Security Checks	high
148757	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1244-1)	Nessus	SuSE Local Security Checks	high
148752	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1245-1)	Nessus	SuSE Local Security Checks	high
148751	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1242-1)	Nessus	SuSE Local Security Checks	high
148545	Oracle Linux 7 : qemu (ELSA-2021-9109)	Nessus	Oracle Linux Local Security Checks	high
148544	Oracle Linux 7 : qemu (ELSA-2021-9104)	Nessus	Oracle Linux Local Security Checks	high
146938	openSUSE Security Update : qemu (openSUSE-2021-363)	Nessus	SuSE Local Security Checks	high
146793	RHEL 8 : virt:8.2 and virt-devel:8.2 (RHSA-2021:0648)	Nessus	Red Hat Local Security Checks	low
146643	SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2021:0521-1)	Nessus	SuSE Local Security Checks	high
146303	Ubuntu 16.04 LTS / 18.04 LTS / 20.04 LTS : QEMU vulnerabilities (USN-4725-1)	Nessus	Ubuntu Local Security Checks	high

Detections

Analytics

CVE-2020-11947

low

Tenable Plugins

medium

medium

medium

medium

medium

medium

medium

high

high

high

high

high

high

high

high

high

low

high

high