Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2015-7703. Reason: This candidate is a reservation duplicate of CVE-2015-7703. Notes: All CVE users should reference CVE-2015-7703 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage.

According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands.(CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled     during compilation (e.g. timingstats) was referenced by     the statistics or filegen configuration     command.(CVE-2015-5195)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-5196)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet.(CVE-2015-5219)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7691)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7692)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory.(CVE-2015-7701)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7702)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-7703)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash.(CVE-2015-7852)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client     (A).(CVE-2015-7974)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to     crash ntpd.(CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash     ntpd.(CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with     bad authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of     time.(CVE-2015-7979)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance.(CVE-2015-8158)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Security Fix(es) :

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A remote     attacker could use a specially crafted NTP packet to     crash ntpd. (CVE-2015-7691, CVE-2015-7692,     CVE-2015-7702)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory. (CVE-2015-7701)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash. (CVE-2015-7852)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to crash     ntpd. (CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash ntpd.
    (CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with bad     authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of time.
    (CVE-2015-7979)

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands. (CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled during     compilation (e.g. timingstats) was referenced by the     statistics or filegen configuration command.
    (CVE-2015-5195)

  - It was found that NTP's :config command could be used to     set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals). (CVE-2015-5196, CVE-2015-7703)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet. (CVE-2015-5219)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client (A).
    (CVE-2015-7974)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvr (Red Hat).

Additional Changes :

An update for ntp is now available for Red Hat Enterprise Linux 7.

Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

The Network Time Protocol (NTP) is used to synchronize a computer's time with another referenced time source. These packages include the ntpd service which continuously adjusts system time and utilities used to query and configure the ntpd service.

Security Fix(es) :

* It was found that the fix for CVE-2014-9750 was incomplete: three issues were found in the value length checks in NTP's ntp_crypto.c, where a packet with particular autokey operations that contained malicious data was not always being completely validated. A remote attacker could use a specially crafted NTP packet to crash ntpd.
(CVE-2015-7691, CVE-2015-7692, CVE-2015-7702)

* A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If ntpd was configured to use autokey authentication, an attacker could send packets to ntpd that would, after several days of ongoing attack, cause it to run out of memory. (CVE-2015-7701)

* An off-by-one flaw, leading to a buffer overflow, was found in cookedprint functionality of ntpq. A specially crafted NTP packet could potentially cause ntpq to crash. (CVE-2015-7852)

* A NULL pointer dereference flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could potentially use this flaw to crash ntpd. (CVE-2015-7977)

* A stack-based buffer overflow flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could use this flaw to crash ntpd. (CVE-2015-7978)

* It was found that when NTP was configured in broadcast mode, a remote attacker could broadcast packets with bad authentication to all clients. The clients, upon receiving the malformed packets, would break the association with the broadcast server, causing them to become out of sync over a longer period of time. (CVE-2015-7979)

* It was found that ntpd could crash due to an uninitialized variable when processing malformed logconfig configuration commands.
(CVE-2015-5194)

* It was found that ntpd would exit with a segmentation fault when a statistics type that was not enabled during compilation (e.g.
timingstats) was referenced by the statistics or filegen configuration command. (CVE-2015-5195)

* It was found that NTP's :config command could be used to set the pidfile and driftfile paths without any restrictions. A remote attacker could use this flaw to overwrite a file on the file system with a file containing the pid of the ntpd process (immediately) or the current estimated drift of the system clock (in hourly intervals).
(CVE-2015-5196, CVE-2015-7703)

* It was discovered that the sntp utility could become unresponsive due to being caught in an infinite loop when processing a crafted NTP packet. (CVE-2015-5219)

* A flaw was found in the way NTP verified trusted keys during symmetric key authentication. An authenticated client (A) could use this flaw to modify a packet sent between a server (B) and a client (C) using a key that is different from the one known to the client (A). (CVE-2015-7974)

* A flaw was found in the way the ntpq client processed certain incoming packets in a loop in the getresponse() function. A remote attacker could potentially use this flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvar (Red Hat).

Additional Changes :

For detailed information on changes in this release, see the Red Hat Enterprise Linux 7.3 Release Notes linked from the References section.

New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1, and -current to fix security issues.

ID	Name	Product	Family	Severity
99822	EulerOS 2.0 SP1 : ntp (EulerOS-SA-2016-1060)	Nessus	Huawei Local Security Checks	high
95850	Scientific Linux Security Update : ntp on SL7.x x86_64 (20161103)	Nessus	Scientific Linux Local Security Checks	high
95330	CentOS 7 : ntp (CESA-2016:2583)	Nessus	CentOS Local Security Checks	high
86664	Slackware 13.0 / 13.1 / 13.37 / 14.0 / 14.1 / current : ntp (SSA:2015-302-03)	Nessus	Slackware Local Security Checks	critical

Detections

Analytics

CVE-2015-5196

No Score

Tenable Plugins

high

high

high

critical