According to the versions of the ntp packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands.(CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled     during compilation (e.g. timingstats) was referenced by     the statistics or filegen configuration     command.(CVE-2015-5195)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-5196)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet.(CVE-2015-5219)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7691)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7692)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory.(CVE-2015-7701)

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A     remote attacker could use a specially crafted NTP     packet to crash ntpd.(CVE-2015-7702)

  - It was found that NTP's :config command could be used     to set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals).(CVE-2015-7703)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash.(CVE-2015-7852)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client     (A).(CVE-2015-7974)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to     crash ntpd.(CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash     ntpd.(CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with     bad authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of     time.(CVE-2015-7979)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance.(CVE-2015-8158)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Security Fix(es) :

  - It was found that the fix for CVE-2014-9750 was     incomplete: three issues were found in the value length     checks in NTP's ntp_crypto.c, where a packet with     particular autokey operations that contained malicious     data was not always being completely validated. A remote     attacker could use a specially crafted NTP packet to     crash ntpd. (CVE-2015-7691, CVE-2015-7692,     CVE-2015-7702)

  - A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If     ntpd was configured to use autokey authentication, an     attacker could send packets to ntpd that would, after     several days of ongoing attack, cause it to run out of     memory. (CVE-2015-7701)

  - An off-by-one flaw, leading to a buffer overflow, was     found in cookedprint functionality of ntpq. A specially     crafted NTP packet could potentially cause ntpq to     crash. (CVE-2015-7852)

  - A NULL pointer dereference flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could potentially use this flaw to crash     ntpd. (CVE-2015-7977)

  - A stack-based buffer overflow flaw was found in the way     ntpd processed 'ntpdc reslist' commands that queried     restriction lists with a large amount of entries. A     remote attacker could use this flaw to crash ntpd.
    (CVE-2015-7978)

  - It was found that when NTP was configured in broadcast     mode, a remote attacker could broadcast packets with bad     authentication to all clients. The clients, upon     receiving the malformed packets, would break the     association with the broadcast server, causing them to     become out of sync over a longer period of time.
    (CVE-2015-7979)

  - It was found that ntpd could crash due to an     uninitialized variable when processing malformed     logconfig configuration commands. (CVE-2015-5194)

  - It was found that ntpd would exit with a segmentation     fault when a statistics type that was not enabled during     compilation (e.g. timingstats) was referenced by the     statistics or filegen configuration command.
    (CVE-2015-5195)

  - It was found that NTP's :config command could be used to     set the pidfile and driftfile paths without any     restrictions. A remote attacker could use this flaw to     overwrite a file on the file system with a file     containing the pid of the ntpd process (immediately) or     the current estimated drift of the system clock (in     hourly intervals). (CVE-2015-5196, CVE-2015-7703)

  - It was discovered that the sntp utility could become     unresponsive due to being caught in an infinite loop     when processing a crafted NTP packet. (CVE-2015-5219)

  - A flaw was found in the way NTP verified trusted keys     during symmetric key authentication. An authenticated     client (A) could use this flaw to modify a packet sent     between a server (B) and a client (C) using a key that     is different from the one known to the client (A).
    (CVE-2015-7974)

  - A flaw was found in the way the ntpq client processed     certain incoming packets in a loop in the getresponse()     function. A remote attacker could potentially use this     flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvr (Red Hat).

Additional Changes :

An update for ntp is now available for Red Hat Enterprise Linux 7.

Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

The Network Time Protocol (NTP) is used to synchronize a computer's time with another referenced time source. These packages include the ntpd service which continuously adjusts system time and utilities used to query and configure the ntpd service.

Security Fix(es) :

* It was found that the fix for CVE-2014-9750 was incomplete: three issues were found in the value length checks in NTP's ntp_crypto.c, where a packet with particular autokey operations that contained malicious data was not always being completely validated. A remote attacker could use a specially crafted NTP packet to crash ntpd.
(CVE-2015-7691, CVE-2015-7692, CVE-2015-7702)

* A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If ntpd was configured to use autokey authentication, an attacker could send packets to ntpd that would, after several days of ongoing attack, cause it to run out of memory. (CVE-2015-7701)

* An off-by-one flaw, leading to a buffer overflow, was found in cookedprint functionality of ntpq. A specially crafted NTP packet could potentially cause ntpq to crash. (CVE-2015-7852)

* A NULL pointer dereference flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could potentially use this flaw to crash ntpd. (CVE-2015-7977)

* A stack-based buffer overflow flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could use this flaw to crash ntpd. (CVE-2015-7978)

* It was found that when NTP was configured in broadcast mode, a remote attacker could broadcast packets with bad authentication to all clients. The clients, upon receiving the malformed packets, would break the association with the broadcast server, causing them to become out of sync over a longer period of time. (CVE-2015-7979)

* It was found that ntpd could crash due to an uninitialized variable when processing malformed logconfig configuration commands.
(CVE-2015-5194)

* It was found that ntpd would exit with a segmentation fault when a statistics type that was not enabled during compilation (e.g.
timingstats) was referenced by the statistics or filegen configuration command. (CVE-2015-5195)

* It was found that NTP's :config command could be used to set the pidfile and driftfile paths without any restrictions. A remote attacker could use this flaw to overwrite a file on the file system with a file containing the pid of the ntpd process (immediately) or the current estimated drift of the system clock (in hourly intervals).
(CVE-2015-5196, CVE-2015-7703)

* It was discovered that the sntp utility could become unresponsive due to being caught in an infinite loop when processing a crafted NTP packet. (CVE-2015-5219)

* A flaw was found in the way NTP verified trusted keys during symmetric key authentication. An authenticated client (A) could use this flaw to modify a packet sent between a server (B) and a client (C) using a key that is different from the one known to the client (A). (CVE-2015-7974)

* A flaw was found in the way the ntpq client processed certain incoming packets in a loop in the getresponse() function. A remote attacker could potentially use this flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvar (Red Hat).

Additional Changes :

For detailed information on changes in this release, see the Red Hat Enterprise Linux 7.3 Release Notes linked from the References section.

From Red Hat Security Advisory 2016:2583 :

An update for ntp is now available for Red Hat Enterprise Linux 7.

Red Hat Product Security has rated this update as having a security impact of Moderate. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available for each vulnerability from the CVE link(s) in the References section.

The Network Time Protocol (NTP) is used to synchronize a computer's time with another referenced time source. These packages include the ntpd service which continuously adjusts system time and utilities used to query and configure the ntpd service.

Security Fix(es) :

* It was found that the fix for CVE-2014-9750 was incomplete: three issues were found in the value length checks in NTP's ntp_crypto.c, where a packet with particular autokey operations that contained malicious data was not always being completely validated. A remote attacker could use a specially crafted NTP packet to crash ntpd.
(CVE-2015-7691, CVE-2015-7692, CVE-2015-7702)

* A memory leak flaw was found in ntpd's CRYPTO_ASSOC. If ntpd was configured to use autokey authentication, an attacker could send packets to ntpd that would, after several days of ongoing attack, cause it to run out of memory. (CVE-2015-7701)

* An off-by-one flaw, leading to a buffer overflow, was found in cookedprint functionality of ntpq. A specially crafted NTP packet could potentially cause ntpq to crash. (CVE-2015-7852)

* A NULL pointer dereference flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could potentially use this flaw to crash ntpd. (CVE-2015-7977)

* A stack-based buffer overflow flaw was found in the way ntpd processed 'ntpdc reslist' commands that queried restriction lists with a large amount of entries. A remote attacker could use this flaw to crash ntpd. (CVE-2015-7978)

* It was found that when NTP was configured in broadcast mode, a remote attacker could broadcast packets with bad authentication to all clients. The clients, upon receiving the malformed packets, would break the association with the broadcast server, causing them to become out of sync over a longer period of time. (CVE-2015-7979)

* It was found that ntpd could crash due to an uninitialized variable when processing malformed logconfig configuration commands.
(CVE-2015-5194)

* It was found that ntpd would exit with a segmentation fault when a statistics type that was not enabled during compilation (e.g.
timingstats) was referenced by the statistics or filegen configuration command. (CVE-2015-5195)

* It was found that NTP's :config command could be used to set the pidfile and driftfile paths without any restrictions. A remote attacker could use this flaw to overwrite a file on the file system with a file containing the pid of the ntpd process (immediately) or the current estimated drift of the system clock (in hourly intervals).
(CVE-2015-5196, CVE-2015-7703)

* It was discovered that the sntp utility could become unresponsive due to being caught in an infinite loop when processing a crafted NTP packet. (CVE-2015-5219)

* A flaw was found in the way NTP verified trusted keys during symmetric key authentication. An authenticated client (A) could use this flaw to modify a packet sent between a server (B) and a client (C) using a key that is different from the one known to the client (A). (CVE-2015-7974)

* A flaw was found in the way the ntpq client processed certain incoming packets in a loop in the getresponse() function. A remote attacker could potentially use this flaw to crash an ntpq client instance. (CVE-2015-8158)

The CVE-2015-5219 and CVE-2015-7703 issues were discovered by Miroslav Lichvar (Red Hat).

Additional Changes :

For detailed information on changes in this release, see the Red Hat Enterprise Linux 7.3 Release Notes linked from the References section.

Security fix for CVE-2015-7704, CVE-2015-5300, CVE-2015-7692, CVE-2015-7871, CVE-2015-7702, CVE-2015-7691, CVE-2015-7852, CVE-2015-7701 ---- Security fix for CVE-2015-5146, CVE-2015-5194, CVE-2015-5219, CVE-2015-5195, CVE-2015-5196

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

New ntp packages are available for Slackware 13.0, 13.1, 13.37, 14.0, 14.1, and -current to fix security issues.

Aleksis Kauppinen discovered that NTP incorrectly handled certain remote config packets. In a non-default configuration, a remote authenticated attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-5146)

Miroslav Lichvar discovered that NTP incorrectly handled logconfig directives. In a non-default configuration, a remote authenticated attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-5194)

Miroslav Lichvar discovered that NTP incorrectly handled certain statistics types. In a non-default configuration, a remote authenticated attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service. (CVE-2015-5195)

Miroslav Lichvar discovered that NTP incorrectly handled certain file paths. In a non-default configuration, a remote authenticated attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service, or overwrite certain files. (CVE-2015-5196, CVE-2015-7703)

Miroslav Lichvar discovered that NTP incorrectly handled certain packets. A remote attacker could possibly use this issue to cause NTP to hang, resulting in a denial of service. (CVE-2015-5219)

Aanchal Malhotra, Isaac E. Cohen, and Sharon Goldberg discovered that NTP incorrectly handled restarting after hitting a panic threshold. A remote attacker could possibly use this issue to alter the system time on clients. (CVE-2015-5300)

It was discovered that NTP incorrectly handled autokey data packets. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service, or possibly execute arbitrary code.
(CVE-2015-7691, CVE-2015-7692, CVE-2015-7702)

It was discovered that NTP incorrectly handled memory when processing certain autokey messages. A remote attacker could possibly use this issue to cause NTP to consume memory, resulting in a denial of service. (CVE-2015-7701)

Aanchal Malhotra, Isaac E. Cohen, and Sharon Goldberg discovered that NTP incorrectly handled rate limiting. A remote attacker could possibly use this issue to cause clients to stop updating their clock.
(CVE-2015-7704, CVE-2015-7705)

Yves Younan discovered that NTP incorrectly handled logfile and keyfile directives. In a non-default configuration, a remote authenticated attacker could possibly use this issue to cause NTP to enter a loop, resulting in a denial of service. (CVE-2015-7850)

Yves Younan and Aleksander Nikolich discovered that NTP incorrectly handled ascii conversion. A remote attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2015-7852)

Yves Younan discovered that NTP incorrectly handled reference clock memory. A malicious refclock could possibly use this issue to cause NTP to crash, resulting in a denial of service, or possibly execute arbitrary code. (CVE-2015-7853)

John D 'Doug' Birdwell discovered that NTP incorrectly handled decoding certain bogus values. An attacker could possibly use this issue to cause NTP to crash, resulting in a denial of service.
(CVE-2015-7855)

Stephen Gray discovered that NTP incorrectly handled symmetric association authentication. A remote attacker could use this issue to possibly bypass authentication and alter the system clock.
(CVE-2015-7871)

In the default installation, attackers would be isolated by the NTP AppArmor profile.

Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Security fix for CVE-2015-5146, CVE-2015-5194, CVE-2015-5219, CVE-2015-5195, CVE-2015-5196

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
99822	EulerOS 2.0 SP1 : ntp (EulerOS-SA-2016-1060)	Nessus	Huawei Local Security Checks	medium
95850	Scientific Linux Security Update : ntp on SL7.x x86_64 (20161103)	Nessus	Scientific Linux Local Security Checks	medium
95330	CentOS 7 : ntp (CESA-2016:2583)	Nessus	CentOS Local Security Checks	medium
94705	Oracle Linux 7 : ntp (ELSA-2016-2583)	Nessus	Oracle Linux Local Security Checks	medium
94546	RHEL 7 : ntp (RHSA-2016:2583)	Nessus	Red Hat Local Security Checks	medium
89288	Fedora 21 : ntp-4.2.6p5-34.fc21 (2015-77bfbc1bcd)	Nessus	Fedora Local Security Checks	high
86664	Slackware 13.0 / 13.1 / 13.37 / 14.0 / 14.1 / current : ntp (SSA:2015-302-03)	Nessus	Slackware Local Security Checks	high
86630	Ubuntu 12.04 LTS / 14.04 LTS / 15.04 / 15.10 : ntp vulnerabilities (USN-2783-1)	Nessus	Ubuntu Local Security Checks	high
86331	Fedora 22 : ntp-4.2.6p5-33.fc22 (2015-14212)	Nessus	Fedora Local Security Checks	medium
86027	Fedora 23 : ntp-4.2.6p5-33.fc23 (2015-14213)	Nessus	Fedora Local Security Checks	medium

CVE-2015-5196

No Score

Description

References

Details

Tenable Plugins

medium

medium

medium

medium

medium

high

high

high

medium

medium