There are packages installed that are affected by a vulnerability referenced in the following CVE:

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the
    motion picture industry. OpenEXR versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13
    are vulnerable on ILP32 builds to an out-of-bounds read. The vulnerability is reached when a crafted
    uncompressed deep-tile EXR causes the sample-count table size calculation in OpenEXRCore decoding.c to
    wrap before unpack_sample_table() iterates over the full attacker-controlled tile dimensions, allowing
    denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. (CVE-2026-59983)

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792627161 advisory.

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K     decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any     application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is     triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH     library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses     an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort()     directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping     only its internal HT header parser in error handling while leaving the later codestream read and     construction calls unprotected. This issue has been resolved in version 3.4.13. (CVE-2026-54920)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12 and 3.4.13 contain a heap out-of-bounds write in     Imf_4_0::SampleCountChannel::set(int r, unsigned int newNumSamples[]). The row-based sample-count setter     computes the target Y coordinate with dataWindow.min.x instead of dataWindow.min.y. For a valid deep image     data window where min.x != min.y, a valid row index can be translated into an invalid Y coordinate,     causing writes before the allocated _numSamples buffer. The vulnerability is reachable through the public     OpenEXRUtil DeepImage API and can lead to heap corruption and process crashes. This issue has been fixed     in versions 3.2.10, 3.3.12 and 3.4.13. (CVE-2026-55059)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop     vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next     power of two using repeated unsigned left shifts, which terminates for normal values but fails for     UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0     remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public     OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose     destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This     issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. (CVE-2026-55373)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13,     an int32_t multiplication in OpenEXRCore's unpack_sample_table() can overflow while decoding a crafted     deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and     a crash. Because the overflow occurs in the standard decoding path (exr_decoding_run), any application     that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.
    (CVE-2026-59183)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 allow a     crafted EXR with a nonzero dataWindow.min to make TypedFlatImageChannel::row() return an invalid heap     pointer, causing out-of-bounds or use-after-free writes. This occurs when an application writes rows     through FlatHalfChannel::row(). Affected consumers are tools, converters, render pipeline components, or     image-processing services that accept untrusted EXR files and use FlatHalfChannel::row() on loaded images.
    This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. (CVE-2026-59184)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792628290 advisory.

  - An issue in Academy Software Foundation openexr v.3.2.3 and before allows a local attacker to cause a     denial of service (DoS) via the convert function of exrmultipart.cpp. (CVE-2024-31047)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K     decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any     application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is     triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH     library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses     an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort()     directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping     only its internal HT header parser in error handling while leaving the later codestream read and     construction calls unprotected. This issue has been resolved in version 3.4.13. (CVE-2026-54920)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12 and 3.4.13 contain a heap out-of-bounds write in     Imf_4_0::SampleCountChannel::set(int r, unsigned int newNumSamples[]). The row-based sample-count setter     computes the target Y coordinate with dataWindow.min.x instead of dataWindow.min.y. For a valid deep image     data window where min.x != min.y, a valid row index can be translated into an invalid Y coordinate,     causing writes before the allocated _numSamples buffer. The vulnerability is reachable through the public     OpenEXRUtil DeepImage API and can lead to heap corruption and process crashes. This issue has been fixed     in versions 3.2.10, 3.3.12 and 3.4.13. (CVE-2026-55059)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop     vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next     power of two using repeated unsigned left shifts, which terminates for normal values but fails for     UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0     remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public     OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose     destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This     issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. (CVE-2026-55373)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13,     an int32_t multiplication in OpenEXRCore's unpack_sample_table() can overflow while decoding a crafted     deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and     a crash. Because the overflow occurs in the standard decoding path (exr_decoding_run), any application     that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.
    (CVE-2026-59183)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of FreeBSD installed on the remote host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the 56449320-97c5-11f1-84d7-3c7c3fba4204 advisory.

    Cary Phillips reports:
    [The OpenEXR 3.4.14] release addresses the following security vulnerabilities:

Tenable has extracted the preceding description block directly from the FreeBSD security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792628290 advisory.

  - An issue in Academy Software Foundation openexr v.3.2.3 and before allows a local attacker to cause a     denial of service (DoS) via the convert function of exrmultipart.cpp. (CVE-2024-31047)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K     decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any     application that calls exr_start_read() on untrusted input, resulting in denial of service. The crash is     triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH     library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses     an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort()     directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping     only its internal HT header parser in error handling while leaving the later codestream read and     construction calls unprotected. This issue has been resolved in version 3.4.13. (CVE-2026-54920)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12 and 3.4.13 contain a heap out-of-bounds write in     Imf_4_0::SampleCountChannel::set(int r, unsigned int newNumSamples[]). The row-based sample-count setter     computes the target Y coordinate with dataWindow.min.x instead of dataWindow.min.y. For a valid deep image     data window where min.x != min.y, a valid row index can be translated into an invalid Y coordinate,     causing writes before the allocated _numSamples buffer. The vulnerability is reachable through the public     OpenEXRUtil DeepImage API and can lead to heap corruption and process crashes. This issue has been fixed     in versions 3.2.10, 3.3.12 and 3.4.13. (CVE-2026-55059)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop     vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next     power of two using repeated unsigned left shifts, which terminates for normal values but fails for     UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0     remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public     OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose     destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This     issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. (CVE-2026-55373)

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13,     an int32_t multiplication in OpenEXRCore's unpack_sample_table() can overflow while decoding a crafted     deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and     a crash. Because the overflow occurs in the standard decoding path (exr_decoding_run), any application     that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.
    (CVE-2026-59183)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - OpenEXR is the reference implementation and specification for the EXR image format, widely used in the     motion picture industry. OpenEXR versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13     are vulnerable on ILP32 builds to an out-of-bounds read. The vulnerability is reached when a crafted     uncompressed deep-tile EXR causes the sample-count table size calculation in OpenEXRCore decoding.c to     wrap before unpack_sample_table() iterates over the full attacker-controlled tile dimensions, allowing     denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. (CVE-2026-59983)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Published	Updated	Severity
463020	Echo: openexr: security update to 3.1.13-2+e3	Tenable Cloud Security	Echo Local Security Checks	10/2/2026	10/2/2026	medium
463020	Echo: openexr: security update to 3.1.13-2+e3	Tenable Self-Hosted Container Security	Echo Local Security Checks	10/2/2026	10/2/2026	medium
370232	AlmaLinux 9.2 [TuxCare] Security Update: openexr / openexr-devel / openexr-libs Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792627161)	Nessus	Alma Linux Local Security Checks	10/22/2026	10/22/2026	high
370229	Rocky Linux 9.6 [TuxCare] Security Update: openexr / openexr-devel / openexr-libs Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792628290)	Nessus	Rocky Linux Local Security Checks	10/22/2026	10/26/2026	high
335504	FreeBSD : OpenEXR -- 3.4.14 fixes multiple vulnerabilities (56449320-97c5-11f1-84d7-3c7c3fba4204)	Nessus	FreeBSD Local Security Checks	8/15/2026	8/26/2026	high
370227	AlmaLinux 9.6 [TuxCare] Security Update: openexr / openexr-devel / openexr-libs Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792628290)	Nessus	Alma Linux Local Security Checks	10/22/2026	10/26/2026	high
341338	Linux Distros Unpatched Vulnerability : CVE-2026-59983	Nessus	Misc.	8/28/2026	11/12/2026	medium

Detections

Analytics

Plugins Search

medium

medium

high

high

high

high

medium