The remote Oracle Linux 7 host has packages installed that are affected by a vulnerability as referenced in the ELSA-2022-9017 advisory.

    - fixes CVE-2021-3712 openssl: Read buffer overruns processing ASN.1 strings

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the openssl098e package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own 'd2i' functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the 'data' and 'length' fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the 'data' field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the openssl098e package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own 'd2i' functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the 'data' and 'length' fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the 'data' field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The version of Junos OS installed on the remote host is affected by multiple vulnerabilities as referenced in the JSA69715 advisory.

  - The Raccoon attack exploits a flaw in the TLS specification which can lead to an attacker being able to     compute the pre-master secret in connections which have used a Diffie-Hellman (DH) based ciphersuite. In     such a case this would result in the attacker being able to eavesdrop on all encrypted communications sent     over that TLS connection. The attack can only be exploited if an implementation re-uses a DH secret across     multiple TLS connections. Note that this issue only impacts DH ciphersuites and not ECDH ciphersuites.
    This issue affects OpenSSL 1.0.2 which is out of support and no longer receiving public updates. OpenSSL     1.1.1 is not vulnerable to this issue. Fixed in OpenSSL 1.0.2w (Affected 1.0.2-1.0.2v). (CVE-2020-1968)

  - The X.509 GeneralName type is a generic type for representing different types of names. One of those name     types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different     instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both     GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a     possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1)     Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in     an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp     authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an     attacker can control both items being compared then that attacker could trigger a crash. For example if     the attacker can trick a client or server into checking a malicious certificate against a malicious CRL     then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a     certificate. This checking happens prior to the signatures on the certificate and CRL being verified.
    OpenSSL's s_server, s_client and verify tools have support for the -crl_download option which implements     automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an     unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of     EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will     accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue.
    Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected     1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). (CVE-2020-1971)

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the data field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

  - OpenSSL 1.0.2 supports SSLv2. If a client attempts to negotiate SSLv2 with a server that is configured to     support both SSLv2 and more recent SSL and TLS versions then a check is made for a version rollback attack     when unpadding an RSA signature. Clients that support SSL or TLS versions greater than SSLv2 are supposed     to use a special form of padding. A server that supports greater than SSLv2 is supposed to reject     connection attempts from a client where this special form of padding is present, because this indicates     that a version rollback has occurred (i.e. both client and server support greater than SSLv2, and yet this     is the version that is being requested). The implementation of this padding check inverted the logic so     that the connection attempt is accepted if the padding is present, and rejected if it is absent. This     means that such as server will accept a connection if a version rollback attack has occurred. Further the     server will erroneously reject a connection if a normal SSLv2 connection attempt is made. Only OpenSSL     1.0.2 servers from version 1.0.2s to 1.0.2x are affected by this issue. In order to be vulnerable a 1.0.2     server must: 1) have configured SSLv2 support at compile time (this is off by default), 2) have configured     SSLv2 support at runtime (this is off by default), 3) have configured SSLv2 ciphersuites (these are not in     the default ciphersuite list) OpenSSL 1.1.1 does not have SSLv2 support and therefore is not vulnerable to     this issue. The underlying error is in the implementation of the RSA_padding_check_SSLv23() function. This     also affects the RSA_SSLV23_PADDING padding mode used by various other functions. Although 1.1.1 does not     support SSLv2 the RSA_padding_check_SSLv23() function still exists, as does the RSA_SSLV23_PADDING padding     mode. Applications that directly call that function or use that padding mode will encounter this issue.
    However since there is no support for the SSLv2 protocol in 1.1.1 this is considered a bug and not a     security issue in that version. OpenSSL 1.0.2 is out of support and no longer receiving public updates.
    Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j.
    Fixed in OpenSSL 1.0.2y (Affected 1.0.2s-1.0.2x). (CVE-2021-23839)

  - Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument     in some cases where the input length is close to the maximum permissable length for an integer on the     platform. In such cases the return value from the function call will be 1 (indicating success), but the     output length value will be negative. This could cause applications to behave incorrectly or crash.
    OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to     OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out     of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should     upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i).
    Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). (CVE-2021-23840)

  - The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based     on the issuer and serial number data contained within an X509 certificate. However it fails to correctly     handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is     maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a     potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by     OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on     certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are     affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x     and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving     public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should     upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected     1.0.2-1.0.2x). (CVE-2021-23841)

Note: Nessus found J-Web enabled [set system services web-management http(s)] on this device.

The remote NewStart CGSL host, running version MAIN 6.02, has openssl packages installed that are affected by multiple vulnerabilities:

  - Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument     in some cases where the input length is close to the maximum permissable length for an integer on the     platform. In such cases the return value from the function call will be 1 (indicating success), but the     output length value will be negative. This could cause applications to behave incorrectly or crash.
    OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to     OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out     of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should     upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i).
    Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). (CVE-2021-23840)

  - The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based     on the issuer and serial number data contained within an X509 certificate. However it fails to correctly     handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is     maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a     potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by     OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on     certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are     affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x     and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving     public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should     upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected     1.0.2-1.0.2x). (CVE-2021-23841)

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the data field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

  - The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop     forever for non-prime moduli. Internally this function is used when parsing certificates that contain     elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point     encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has     invalid explicit curve parameters. Since certificate parsing happens prior to verification of the     certificate signature, any process that parses an externally supplied certificate may thus be subject to a     denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they     can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients     consuming server certificates - TLS servers consuming client certificates - Hosting providers taking     certificates or private keys from customers - Certificate authorities parsing certification requests from     subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that     use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS     issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate     which makes it slightly harder to trigger the infinite loop. However any operation which requires the     public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-     signed certificate to trigger the loop during verification of the certificate signature. This issue     affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the     15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected     1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). (CVE-2022-0778)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote NewStart CGSL host, running version CORE 5.05 / MAIN 5.05, has openssl packages installed that are affected by multiple vulnerabilities:

  - Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument     in some cases where the input length is close to the maximum permissable length for an integer on the     platform. In such cases the return value from the function call will be 1 (indicating success), but the     output length value will be negative. This could cause applications to behave incorrectly or crash.
    OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to     OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out     of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should     upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i).
    Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). (CVE-2021-23840)

  - The OpenSSL public API function X509_issuer_and_serial_hash() attempts to create a unique hash value based     on the issuer and serial number data contained within an X509 certificate. However it fails to correctly     handle any errors that may occur while parsing the issuer field (which might occur if the issuer field is     maliciously constructed). This may subsequently result in a NULL pointer deref and a crash leading to a     potential denial of service attack. The function X509_issuer_and_serial_hash() is never directly called by     OpenSSL itself so applications are only vulnerable if they use this function directly and they use it on     certificates that may have been obtained from untrusted sources. OpenSSL versions 1.1.1i and below are     affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1j. OpenSSL versions 1.0.2x     and below are affected by this issue. However OpenSSL 1.0.2 is out of support and no longer receiving     public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should     upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i). Fixed in OpenSSL 1.0.2y (Affected     1.0.2-1.0.2x). (CVE-2021-23841)

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the data field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

  - The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop     forever for non-prime moduli. Internally this function is used when parsing certificates that contain     elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point     encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has     invalid explicit curve parameters. Since certificate parsing happens prior to verification of the     certificate signature, any process that parses an externally supplied certificate may thus be subject to a     denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they     can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients     consuming server certificates - TLS servers consuming client certificates - Hosting providers taking     certificates or private keys from customers - Certificate authorities parsing certification requests from     subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that     use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS     issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate     which makes it slightly harder to trigger the infinite loop. However any operation which requires the     public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-     signed certificate to trigger the loop during verification of the certificate signature. This issue     affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the     15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected     1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). (CVE-2022-0778)

  - A vulnerability was found in the Linux kernel's nft_set_desc_concat_parse() function .This flaw allows an     attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and     possibly to run code. (CVE-2022-2078)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Alibaba Cloud Linux 3 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALINUX3-SA-2022:0025 advisory.

    Package updates are available for Alibaba Cloud Linux 3 that fix the following vulnerabilities:

    CVE-2019-1543:
    ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC     7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce     length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly     allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any     additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are     unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and     integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then     makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then     such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored     bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that     relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any     OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long     nonce value. However user applications that use this cipher directly and set a non-default nonce length to     be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue.
    Due to the limited scope of affected deployments this has been assessed as low severity and therefore we     are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in     OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).

    CVE-2019-1547:
    Normally in OpenSSL EC groups always have a co-factor present and this is used in side channel resistant     code paths. However, in some cases, it is possible to construct a group using explicit parameters (instead     of using a named curve). In those cases it is possible that such a group does not have the cofactor     present. This can occur even where all the parameters match a known named curve. If such a curve is used     then OpenSSL falls back to non-side channel resistant code paths which may result in full key recovery     during an ECDSA signature operation. In order to be vulnerable an attacker would have to have the ability     to time the creation of a large number of signatures where explicit parameters with no co-factor present     are in use by an application using libcrypto. For the avoidance of doubt libssl is not vulnerable because     explicit parameters are never used. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL     1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).

    CVE-2019-1549:
    OpenSSL 1.1.1 introduced a rewritten random number generator (RNG). This was intended to include     protection in the event of a fork() system call in order to ensure that the parent and child processes did     not share the same RNG state. However this protection was not being used in the default case. A partial     mitigation for this issue is that the output from a high precision timer is mixed into the RNG state so     the likelihood of a parent and child process sharing state is significantly reduced. If an application     already calls OPENSSL_init_crypto() explicitly using OPENSSL_INIT_ATFORK then this problem does not occur     at all. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c).

    CVE-2019-1563:
    In situations where an attacker receives automated notification of the success or failure of a decryption     attempt an attacker, after sending a very large number of messages to be decrypted, can recover a     CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the     public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a     certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the     correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL     1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).

    CVE-2021-3712:
    ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the data field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y).

    CVE-2022-0778:
    The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop     forever for non-prime moduli. Internally this function is used when parsing certificates that contain     elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point     encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has     invalid explicit curve parameters. Since certificate parsing happens prior to verification of the     certificate signature, any process that parses an externally supplied certificate may thus be subject to a     denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they     can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients     consuming server certificates - TLS servers consuming client certificates - Hosting providers taking     certificates or private keys from customers - Certificate authorities parsing certification requests from     subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that     use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS     issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate     which makes it slightly harder to trigger the infinite loop. However any operation which requires the     public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-     signed certificate to trigger the loop during verification of the certificate signature. This issue     affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the     15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected     1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc).

Tenable has extracted the preceding description block directly from the Alibaba Cloud Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 7 / 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2021:4614 advisory.

    This release adds the new Apache HTTP Server 2.4.37 Service Pack 10 packages that are part of the JBoss     Core Services offering.

    This release serves as a replacement for Red Hat JBoss Core Services Apache HTTP Server 2.4.37 Service     Pack 9 and includes bug fixes and enhancements. Refer to the Release Notes for information on the most     significant bug fixes and enhancements included in this release.

    Security Fix(es):

    * httpd: Single zero byte stack overflow in mod_auth_digest (CVE-2020-35452)
    * httpd: mod_session NULL pointer dereference in parser (CVE-2021-26690)
    * httpd: Heap overflow in mod_session (CVE-2021-26691)
    * httpd: mod_proxy_wstunnel tunneling of non Upgraded connection (CVE-2019-17567)
    * httpd: MergeSlashes regression (CVE-2021-30641)
    * httpd: mod_proxy NULL pointer dereference (CVE-2020-13950)
    * jbcs-httpd24-openssl: openssl: NULL pointer dereference in X509_issuer_and_serial_hash()     (CVE-2021-23841)
    * openssl: Read buffer overruns processing ASN.1 strings (CVE-2021-3712)
    * openssl: integer overflow in CipherUpdate (CVE-2021-23840)
    * pcre: buffer over-read in JIT when UTF is disabled (CVE-2019-20838)
    * pcre: integer overflow in libpcre (CVE-2020-14155)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the shim-signed packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - While parsing an IPAddressFamily extension in an X.509 certificate, it is possible to do a one-byte     overread. This would result in an incorrect text display of the certificate. This bug has been present     since 2006 and is present in all versions of OpenSSL before 1.0.2m and 1.1.0g. (CVE-2017-3735)

  - Constructed ASN.1 types with a recursive definition (such as can be found in PKCS7) could eventually     exceed the stack given malicious input with excessive recursion. This could result in a Denial Of Service     attack. There are no such structures used within SSL/TLS that come from untrusted sources so this is     considered safe. Fixed in OpenSSL 1.1.0h (Affected 1.1.0-1.1.0g). Fixed in OpenSSL 1.0.2o (Affected     1.0.2b-1.0.2n). (CVE-2018-0739)

  - In situations where an attacker receives automated notification of the success or failure of a decryption     attempt an attacker, after sending a very large number of messages to be decrypted, can recover a     CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the     public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a     certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the     correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL     1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s). (CVE-2019-1563)

  - Calls to EVP_CipherUpdate, EVP_EncryptUpdate and EVP_DecryptUpdate may overflow the output length argument     in some cases where the input length is close to the maximum permissable length for an integer on the     platform. In such cases the return value from the function call will be 1 (indicating success), but the     output length value will be negative. This could cause applications to behave incorrectly or crash.
    OpenSSL versions 1.1.1i and below are affected by this issue. Users of these versions should upgrade to     OpenSSL 1.1.1j. OpenSSL versions 1.0.2x and below are affected by this issue. However OpenSSL 1.0.2 is out     of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should     upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.1.1j (Affected 1.1.1-1.1.1i).
    Fixed in OpenSSL 1.0.2y (Affected 1.0.2-1.0.2x). (CVE-2021-23840)

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own 'd2i' functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the 'data' and 'length' fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the 'data' field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

  - The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop     forever for non-prime moduli. Internally this function is used when parsing certificates that contain     elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point     encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has     invalid explicit curve parameters. Since certificate parsing happens prior to verification of the     certificate signature, any process that parses an externally supplied certificate may thus be subject to a     denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they     can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients     consuming server certificates - TLS servers consuming client certificates - Hosting providers taking     certificates or private keys from customers - Certificate authorities parsing certification requests from     subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that     use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS     issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate     which makes it slightly harder to trigger the infinite loop. However any operation which requires the     public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-     signed certificate to trigger the loop during verification of the certificate signature. This issue     affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the     15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected     1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc). (CVE-2022-0778)

  - There's a possible overflow in handle_image() when shim tries to load and execute crafted EFI executables;
    The handle_image() function takes into account the SizeOfRawData field from each section to be loaded. An     attacker can leverage this to perform out-of-bound writes into memory. Arbitrary code execution is not     discarded in such scenario. (CVE-2022-28737)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The version of AOS installed on the remote host is prior to 6.5.6.6. It is, therefore, affected by multiple vulnerabilities as referenced in the NXSA-AOS-6.5.6.6 advisory.

  - ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a     buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings     which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not     a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar     parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will     additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for     applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array     by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using     the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to     assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for     strings that have been directly constructed. Where an application requests an ASN.1 structure to be     printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the     application without NUL terminating the data field, then a read buffer overrun can occur. The same thing     can also occur during name constraints processing of certificates (for example if a certificate has been     directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the     certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the     X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an     application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL     functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack).
    It could also result in the disclosure of private memory contents (such as private keys, or sensitive     plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected     1.0.2-1.0.2y). (CVE-2021-3712)

  - There is a type confusion vulnerability relating to X.400 address processing inside an X.509 GeneralName.
    X.400 addresses were parsed as an ASN1_STRING but the public structure definition for GENERAL_NAME     incorrectly specified the type of the x400Address field as ASN1_TYPE. This field is subsequently     interpreted by the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an ASN1_STRING. When CRL     checking is enabled (i.e. the application sets the X509_V_FLAG_CRL_CHECK flag), this vulnerability may     allow an attacker to pass arbitrary pointers to a memcmp call, enabling them to read memory contents or     enact a denial of service. In most cases, the attack requires the attacker to provide both the certificate     chain and CRL, neither of which need to have a valid signature. If the attacker only controls one of these     inputs, the other input must already contain an X.400 address as a CRL distribution point, which is     uncommon. As such, this vulnerability is most likely to only affect applications which have implemented     their own functionality for retrieving CRLs over a network. (CVE-2023-0286)

  - The X.509 GeneralName type is a generic type for representing different types of names. One of those name     types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different     instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both     GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a     possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1)     Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in     an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp     authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an     attacker can control both items being compared then that attacker could trigger a crash. For example if     the attacker can trick a client or server into checking a malicious certificate against a malicious CRL     then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a     certificate. This checking happens prior to the signatures on the certificate and CRL being verified.
    OpenSSL's s_server, s_client and verify tools have support for the -crl_download option which implements     automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an     unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of     EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL's parser will     accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue.
    Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected     1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). (CVE-2020-1971)

  - A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient     to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful     decryption an attacker would have to be able to send a very large number of trial messages for decryption.
    The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE. For example, in a TLS     connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An     attacker that had observed a genuine connection between a client and a server could use this flaw to send     trial messages to the server and record the time taken to process them. After a sufficiently large number     of messages the attacker could recover the pre-master secret used for the original connection and thus be     able to decrypt the application data sent over that connection. (CVE-2022-4304)

  - The public API function BIO_new_NDEF is a helper function used for streaming ASN.1 data via a BIO. It is     primarily used internally to OpenSSL to support the SMIME, CMS and PKCS7 streaming capabilities, but may     also be called directly by end user applications. The function receives a BIO from the caller, prepends a     new BIO_f_asn1 filter BIO onto the front of it to form a BIO chain, and then returns the new head of the     BIO chain to the caller. Under certain conditions, for example if a CMS recipient public key is invalid,     the new filter BIO is freed and the function returns a NULL result indicating a failure. However, in this     case, the BIO chain is not properly cleaned up and the BIO passed by the caller still retains internal     pointers to the previously freed filter BIO. If the caller then goes on to call BIO_pop() on the BIO then     a use-after-free will occur. This will most likely result in a crash. This scenario occurs directly in the     internal function B64_write_ASN1() which may cause BIO_new_NDEF() to be called and will subsequently call     BIO_pop() on the BIO. This internal function is in turn called by the public API functions     PEM_write_bio_ASN1_stream, PEM_write_bio_CMS_stream, PEM_write_bio_PKCS7_stream, SMIME_write_ASN1,     SMIME_write_CMS and SMIME_write_PKCS7. Other public API functions that may be impacted by this include     i2d_ASN1_bio_stream, BIO_new_CMS, BIO_new_PKCS7, i2d_CMS_bio_stream and i2d_PKCS7_bio_stream. The OpenSSL     cms and smime command line applications are similarly affected. (CVE-2023-0215)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

A vulnerability exists in the OpenSSL Version 1.0.2 that affects the RTU500 Series product versions listed below.

RTU500 series CMU Firmware versions 12.0.1 – 12.0.14 12.2.1 – 12.2.11 12.4.1 – 12.4.11 12.6.1 – 12.6.8 12.7.1 – 12.7.5 13.2.1 – 13.2.5 13.3.1 – 13.3.3 13.4.1

ASN.1 strings are represented internally within OpenSSL as an ASN1_STRING structure which contains a buffer holding the string data and a field holding the buffer length. This contrasts with normal C strings which are repesented as a buffer for the string data which is terminated with a NUL (0) byte. Although not a strict requirement, ASN.1 strings that are parsed using OpenSSL's own d2i functions (and other similar parsing functions) as well as any string whose value has been set with the ASN1_STRING_set() function will additionally NUL terminate the byte array in the ASN1_STRING structure. However, it is possible for applications to directly construct valid ASN1_STRING structures which do not NUL terminate the byte array by directly setting the data and length fields in the ASN1_STRING array. This can also happen by using the ASN1_STRING_set0() function. Numerous OpenSSL functions that print ASN.1 data have been found to assume that the ASN1_STRING byte array will be NUL terminated, even though this is not guaranteed for strings that have been directly constructed. Where an application requests an ASN.1 structure to be printed, and where that ASN.1 structure contains ASN1_STRINGs that have been directly constructed by the application without NUL terminating the data field, then a read buffer overrun can occur. The same thing can also occur during name constraints processing of certificates (for example if a certificate has been directly constructed by the application instead of loading it via the OpenSSL parsing functions, and the certificate contains non NUL terminated ASN1_STRING structures). It can also occur in the X509_get1_email(), X509_REQ_get1_email() and X509_get1_ocsp() functions. If a malicious actor can cause an application to directly construct an ASN1_STRING and then process it through one of the affected OpenSSL functions then this issue could be hit. This might result in a crash (causing a Denial of Service attack). It could also result in the disclosure of private memory contents (such as private keys, or sensitive plaintext). Fixed in OpenSSL 1.1.1l (Affected 1.1.1-1.1.1k). Fixed in OpenSSL 1.0.2za (Affected 1.0.2-1.0.2y).

This plugin only works with Tenable.ot.
Please visit https://www.tenable.com/products/tenable-ot for more information.

ID	Name	Product	Family	Published	Updated	Severity
156707	Oracle Linux 7 : openssl (ELSA-2022-9017)	Nessus	Oracle Linux Local Security Checks	1/13/2022	11/1/2024	high
157967	EulerOS Virtualization 3.0.6.6 : openssl098e (EulerOS-SA-2022-1136)	Nessus	Huawei Local Security Checks	2/12/2022	11/1/2023	high
158298	EulerOS 2.0 SP3 : openssl098e (EulerOS-SA-2022-1180)	Nessus	Huawei Local Security Checks	2/23/2022	11/1/2023	high
166767	Juniper Junos OS Multiple Vulnerabilities (JSA69715)	Nessus	Junos Local Security Checks	11/1/2022	10/11/2024	high
167478	NewStart CGSL MAIN 6.02 : openssl Multiple Vulnerabilities (NS-SA-2022-0096)	Nessus	NewStart CGSL Local Security Checks	11/15/2022	10/4/2023	high
174068	NewStart CGSL CORE 5.05 / MAIN 5.05 : openssl Multiple Vulnerabilities (NS-SA-2023-0025)	Nessus	NewStart CGSL Local Security Checks	4/11/2023	4/19/2023	high
236517	Alibaba Cloud Linux 3 : 0025: openssl (ALINUX3-SA-2022:0025)	Nessus	Alibaba Cloud Linux Local Security Checks	5/14/2025	5/14/2025	high
155223	RHEL 7 / 8 : Red Hat JBoss Core Services Apache HTTP Server 2.4.37 SP10 (RHSA-2021:4614)	Nessus	Red Hat Local Security Checks	11/11/2021	11/7/2024	critical
175177	EulerOS Virtualization 3.0.2.0 : shim-signed (EulerOS-SA-2023-1748)	Nessus	Huawei Local Security Checks	5/7/2023	1/16/2024	high
206674	Nutanix AOS : Multiple Vulnerabilities (NXSA-AOS-6.5.6.6)	Nessus	Misc.	9/5/2024	2/17/2025	critical
501744	ABB RTU500 Series Out-of-bounds Read in embedded OpenSSL (CVE-2021-3712)	Tenable OT Security	Tenable.ot	9/29/2023	9/4/2024	high

Detections

Analytics

Plugins Search

high

high

high

high

high

high

high

critical

high

critical

high