In the Linux kernel, the following vulnerability has been resolved: HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature() clamps its return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller supplies a small stack buffer, such as a single s32, causing an out-of-bounds write. HID core stores parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that require more than one slot per value, guard the total byte count calculation, and clamp each per-value copy to the remaining caller buffer.

The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792762308 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w     reset and tm thread for reply queue When the task management thread processes reply queues while the reset     thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset     thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize     access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to     block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits     up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as     unrecoverable. (CVE-2025-37861)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send     timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if     the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT     timers. Should fix the BUG: sporadically seen by BlueZ test bot (in Mesh - Send cancel - 1 test). Log:
    ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36:
    kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60
    __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0     vhci_release+0x18b/0x240 ------ (CVE-2025-40284)

  - In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-     elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream     while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two     operations shall be synchronized to avoid slab-use-after-free or worse errors. (CVE-2025-40344)

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in     ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an     outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and     passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm.
    The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an     attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside     icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This     would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a     fake TLV without checking if the remaining packet length can hold the full 18-byte struct     ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the     packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and     ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err()     needs to be changed. A separate patch would be better anyway. (CVE-2026-43038)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in     rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before     copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to     free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init()     (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second     rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this:
    kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe]     rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150     [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. (CVE-2026-45852)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792762308 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w     reset and tm thread for reply queue When the task management thread processes reply queues while the reset     thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset     thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize     access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to     block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits     up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as     unrecoverable. (CVE-2025-37861)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send     timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if     the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT     timers. Should fix the BUG: sporadically seen by BlueZ test bot (in Mesh - Send cancel - 1 test). Log:
    ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36:
    kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60
    __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0     vhci_release+0x18b/0x240 ------ (CVE-2025-40284)

  - In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-     elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream     while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two     operations shall be synchronized to avoid slab-use-after-free or worse errors. (CVE-2025-40344)

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in     ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an     outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and     passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm.
    The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an     attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside     icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This     would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a     fake TLV without checking if the remaining packet length can hold the full 18-byte struct     ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the     packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and     ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err()     needs to be changed. A separate patch would be better anyway. (CVE-2026-43038)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in     rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before     copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to     free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init()     (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second     rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this:
    kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe]     rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150     [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. (CVE-2026-45852)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS-STREAM8:CLSA-2026:1792759740 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before     using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any     validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a     user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to     user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an     out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to     userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory     allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which     properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same     validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
    (CVE-2026-45856)

  - In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in     qd_put Commit a475c5dd16e5 (gfs2: Free quota data objects synchronously) started freeing quota data     objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove     these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker     (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd     objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey     <kartikey406@gmail.com>. (CVE-2026-45861)

  - In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap     inline data write path The inline data buffer head (dibh) is being released prematurely in     gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This     causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The     bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2.
    Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which     calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report)     5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write     to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in     gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write     completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not     available for this issue. The fix is based on analysis of the KASAN report and code review showing the     buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid     leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] (CVE-2026-45984)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.5 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.5:CLSA-2026:1792750763 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: RDMA: Fix use-after-free in     rxe_queue_cleanup On error handling path in rxe_qp_from_init() qp->sq.queue is freed and then     rxe_create_qp() will drop last reference to this object. qp clean up function will try to free this queue     one time and it causes UAF bug. Fix it by zeroing queue pointer after freeing queue in rxe_qp_from_init().
    (CVE-2021-47616)

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If     an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table     traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an     anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove     page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached,     but does this check before holding the mmap lock (as the comment above the check explains). If we racily     merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap     traversals on pages belonging to the child will be able to see the page tables that we are concurrently     removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the     mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a     lockdep warning in collapse_and_free_pmd(), in the line     lockdep_assert_held_write(&vma->anon_vma->root->rwsem). It can also lead to use-after-free access.
    (CVE-2023-52935)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: make sure cache entry active     before cache_show The function `c_show` was called with protection from RCU. This only ensures that `cp`     will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount     use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure     that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free.
    WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822     Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS     1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380     [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530     ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e (CVE-2024-53174)

  - In the Linux kernel, the following vulnerability has been resolved: net: skbuff: propagate shared-frag     marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail     to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to     destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after     copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches     skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result,     the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while     reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses     skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is     one such writer (esp4.c, esp6.c), and a single nft 'dup to <local>' rule -- or any other nf_dup_ipv4() /     xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an     unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray     writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the     source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into     freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on     its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list().
    The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a     direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's     frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each     sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in     tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue     into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for     consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but     a future consumer depending on the marker would regress silently. The same omission exists in     skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds     frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold     frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker.
    (CVE-2026-43503)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792751700 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in     l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we     can follow what udpv6 does and subtract the transhdrlen from the max. (CVE-2022-49727)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack     slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since     6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses     were permitted above state->allocated_stack, but not below it. In other words, if the stack was already     large enough, the access was permitted, but otherwise the access was rejected instead of being allowed     to grow the stack. This undesired rejection was happening in two places: - in     check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these     accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of     them were changed to add also run unprivileged, in which case the old behavior persists. One tests     couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also     fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same     commit as the first one because they're inter-related. Before this patch, writes to the stack using     registers containing a variable offset (as opposed to registers with fixed, known values) were not     properly contributing to the function's needed stack size. As a result, it was possible for a program to     verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been     allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth,     which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling     update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the     variable offset. This was incorrect; the minimum possible value of that register should be used instead.
    This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by     lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The     code is now simpler and more convincingly tracks the correct maximum stack size.
    check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this     helps with the fix for the first issue. A few tests were changed to also check the stack depth     computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
    (CVE-2023-52452)

  - In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL     derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before     using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
    (CVE-2023-53066)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix     a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the     svc_rqst will not be cleaned up. (CVE-2023-53131)

  - In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Add check for kstrdup Add     check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer     dereference. (CVE-2023-54189)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature() clamps its     return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for     each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller     supplies a small stack buffer, such as a single s32, causing an out-of-bounds write. HID core stores     parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that     require more than one slot per value, guard the total byte count calculation, and clamp each per-value     copy to the remaining caller buffer. (CVE-2026-89729)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
371428	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792762308)	Nessus	Rocky Linux Local Security Checks	Local	high
371426	AlmaLinux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792762308)	Nessus	Alma Linux Local Security Checks	Local	high
371420	CentOS Linux 8 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS-STREAM8:CLSA-2026:1792759740)	Nessus	CentOS Local Security Checks	Local	high
371224	CentOS Linux 8.5 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.5:CLSA-2026:1792750763)	Nessus	CentOS Local Security Checks	Local	high
371223	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792751700)	Nessus	Alma Linux Local Security Checks	Local	high
366919	Debian dla-4841 : ata-modules-6.1.0-53-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
366741	Amazon Linux 2 : kernel (ALASKERNEL-5.10-2026-135)	Nessus	Amazon Linux Local Security Checks	Local	medium
364137	Oracle Linux 10 / 9 : Unbreakable Enterprise kernel (ELSA-2026-500374)	Nessus	Oracle Linux Local Security Checks	Local	high
362907	Debian dla-4817 : ata-modules-6.12.107+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
351155	Debian dsa-6528 : ata-modules-6.12.111+deb13-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
345359	Linux Distros Unpatched Vulnerability : CVE-2026-89729	Nessus	Misc.	Local	high

Detections

Analytics

CVE-2026-89729

high

Tenable Plugins

high

high

high

high

high

high

medium

high

high

high

high