In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1793333110 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call
    __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk ->     serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a     reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab     free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock     scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The     existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}:
    _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8     dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc     qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54     handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40     generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0     el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8
    ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80     qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0     vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90     register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424     platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114     driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8
    __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0     device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8     of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac     geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}:
    __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454     console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc
    _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4     dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm]     msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c     drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key -->     free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock);
    lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace:
    dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24     print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c     lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated--- (CVE-2023-52516)

  - In the Linux kernel, the following vulnerability has been resolved: USB: sisusbvga: Add endpoint checks     The syzbot fuzzer was able to provoke a WARNING from the sisusbvga driver: ------------[ cut here     ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 1 PID: 26 at     drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU:
    1 PID: 26 Comm: kworker/1:1 Not tainted 6.2.0-rc5-syzkaller-00199-g5af6ce704936 #0 Hardware name: Google     Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Workqueue: usb_hub_wq hub_event RIP:
    0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Code: 7c 24 18 e8 6c 50 80 fb 48 8b 7c 24 18     e8 62 1a 01 ff 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 60 b1 fa 8a e8 84 b0 be 03 <0f> 0b e9 58 f8 ff     ff e8 3e 50 80 fb 48 81 c5 c0 05 00 00 e9 84 f7 RSP: 0018:ffffc90000a1ed18 EFLAGS: 00010282 RAX:
    0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff888012783a80 RSI: ffffffff816680ec     RDI: fffff52000143d95 RBP: ffff888079020000 R08: 0000000000000005 R09: 0000000000000000 R10:
    0000000080000000 R11: 0000000000000000 R12: 0000000000000003 R13: ffff888017d33370 R14: 0000000000000003     R15: ffff888021213600 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010     DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005592753a60b0 CR3: 0000000022899000 CR4: 00000000003506e0     DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6:
    00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sisusb_bulkout_msg     drivers/usb/misc/sisusbvga/sisusbvga.c:224 [inline] sisusb_send_bulk_msg.constprop.0+0x904/0x1230     drivers/usb/misc/sisusbvga/sisusbvga.c:379 sisusb_send_bridge_packet     drivers/usb/misc/sisusbvga/sisusbvga.c:567 [inline] sisusb_do_init_gfxdevice     drivers/usb/misc/sisusbvga/sisusbvga.c:2077 [inline] sisusb_init_gfxdevice+0x87b/0x4000     drivers/usb/misc/sisusbvga/sisusbvga.c:2177 sisusb_probe+0x9cd/0xbe2     drivers/usb/misc/sisusbvga/sisusbvga.c:2869 ... The problem was caused by the fact that the driver does     not check whether the endpoints it uses are actually present and have the appropriate types. This can be     fixed by adding a simple check of the endpoints. (CVE-2023-54213)

  - In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: use the backlog     for mirred ingress The test Davide added in commit ca22da2fbd69 (act_mirred: use the backlog for nested     calls to mirred ingress) hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv ->     tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that     if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which     generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks     is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress ->     ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the     backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround     does not seem to address the issue. (CVE-2024-26740)

  - In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: fix a bug calling     wakeup_kswapd() with a wrong zone index With numa balancing on, when a numa system is running where a numa     node doesn't have its local memory so it has no managed zones, the following oops has been observed. It's     because wakeup_kswapd() is called with a wrong zone index, -1. Fixed it by checking the index before     calling wakeup_kswapd(). > BUG: unable to handle page fault for address: 00000000000033f3 > #PF:
    supervisor read access in kernel mode > #PF: error_code(0x0000) - not-present page > PGD 0 P4D 0 > Oops:
    0000 [#1] PREEMPT SMP NOPTI > CPU: 2 PID: 895 Comm: masim Not tainted 6.6.0-dirty #255 > Hardware name:
    QEMU Standard PC (i440FX + PIIX, 1996), BIOS > rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 >     RIP: 0010:wakeup_kswapd (./linux/mm/vmscan.c:7812) > Code: (omitted) > RSP: 0000:ffffc90004257d58 EFLAGS:
    00010286 > RAX: ffffffffffffffff RBX: ffff88883fff0480 RCX: 0000000000000003 > RDX: 0000000000000000 RSI:
    0000000000000000 RDI: ffff88883fff0480 > RBP: ffffffffffffffff R08: ff0003ffffffffff R09: ffffffffffffffff     > R10: ffff888106c95540 R11: 0000000055555554 R12: 0000000000000003 > R13: 0000000000000000 R14:
    0000000000000000 R15: ffff88883fff0940 > FS: 00007fc4b8124740(0000) GS:ffff888827c00000(0000)     knlGS:0000000000000000 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 00000000000033f3 CR3:
    000000026cc08004 CR4: 0000000000770ee0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000     > DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > PKRU: 55555554 > Call Trace: >     <TASK> > ? __die > ? page_fault_oops > ? __pte_offset_map_lock > ? exc_page_fault > ? asm_exc_page_fault >     ? wakeup_kswapd > migrate_misplaced_page > __handle_mm_fault > handle_mm_fault > do_user_addr_fault >     exc_page_fault > asm_exc_page_fault > RIP: 0033:0x55b897ba0808 > Code: (omitted) > RSP:
    002b:00007ffeefa821a0 EFLAGS: 00010287 > RAX: 000055b89983acd0 RBX: 00007ffeefa823f8 RCX: 000055b89983acd0     > RDX: 00007fc2f8122010 RSI: 0000000000020000 RDI: 000055b89983acd0 > RBP: 00007ffeefa821a0 R08:
    0000000000000037 R09: 0000000000000075 > R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000     > R13: 00007ffeefa82410 R14: 000055b897ba5dd8 R15: 00007fc4b8340000 > </TASK> (CVE-2024-26783)

  - In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode     lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable     inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try     getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by     function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode     lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru     traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode     lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting     context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is     added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 >     /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg     prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state     inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink =     0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode     ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(i_ea) ---- AA deadlock dispose_list // cannot be executed by prune_icache_sb     wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file     deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode     reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting     function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a     xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added     into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 >     /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia     prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state     inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm     file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia)     make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast
    __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode |     ubifs_jnl_delete_inode(ib)  ubifs_jnl_write_inode ABBA deadlock -----make_reservation(BASEHD)     dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock     by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate(
    ---truncated--- (CVE-2024-45003)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1792976962 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid uninit memory read     in ath9k_htc_rx_msg() syzbot is reporting uninit value at ath9k_htc_rx_msg() [1], for     ioctl(USB_RAW_IOCTL_EP_WRITE) can call ath9k_hif_usb_rx_stream() with pkt_len = 0 but     ath9k_hif_usb_rx_stream() uses __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC) based on an assumption that     pkt_len is valid. As a result, ath9k_hif_usb_rx_stream() allocates skb with uninitialized memory and     ath9k_htc_rx_msg() is reading from uninitialized memory. Since bytes accessed by ath9k_htc_rx_msg() is not     known until ath9k_htc_rx_msg() is called, it would be difficult to check minimal valid pkt_len at if     (pkt_len > 2 * MAX_RX_BUF_SIZE) { line in ath9k_hif_usb_rx_stream(). We have two choices. One is to     workaround by adding __GFP_ZERO so that ath9k_htc_rx_msg() sees 0 if pkt_len is invalid. The other is to     let ath9k_htc_rx_msg() validate pkt_len before accessing. This patch chose the latter. Note that I'm not     sure threshold condition is correct, for I can't find details on possible packet length used by this     protocol. (CVE-2022-50709)

  - In the Linux kernel, the following vulnerability has been resolved: configfs: fix possible memory leak in     configfs_create_dir() kmemleak reported memory leaks in configfs_create_dir(): unreferenced object     0xffff888009f6af00 (size 192): comm modprobe, pid 3777, jiffies 4295537735 (age 233.784s) backtrace:
    kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) new_fragment     (./include/linux/slab.h:600 fs/configfs/dir.c:163) configfs_register_subsystem (fs/configfs/dir.c:1857)     basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic do_one_initcall (init/main.c:1296)     do_init_module (kernel/module/main.c:2455) ... unreferenced object 0xffff888003ba7180 (size 96): comm     modprobe, pid 3777, jiffies 4295537735 (age 233.784s) backtrace: kmem_cache_alloc (mm/slub.c:3250     mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) configfs_new_dirent (./include/linux/slab.h:723     fs/configfs/dir.c:194) configfs_make_dirent (fs/configfs/dir.c:248) configfs_create_dir     (fs/configfs/dir.c:296) configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852)     configfs_register_subsystem (fs/configfs/dir.c:1881) basic_write (drivers/hwtracing/stm/p_basic.c:14)     stm_p_basic do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... This is     because the refcount is not correct in configfs_make_dirent(). For normal stage, the refcount is changing     as: configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() configfs_new_dirent() # set     s_count = 1 dentry->d_fsdata = configfs_get(sd); # s_count = 2 ... configfs_unregister_subsystem()     configfs_remove_dir() remove_dir() configfs_remove_dirent() # s_count = 1 dput() ...
    *dentry_unlink_inode()* configfs_d_iput() # s_count = 0, release However, if we failed in     configfs_create(): configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() # s_count =     2 ... configfs_create() # fail ->out_remove: configfs_remove_dirent(dentry) configfs_put(sd) # s_count = 1     return PTR_ERR(inode); There is no inode in the error path, so the configfs_d_iput() is lost and makes sd     and fragment memory leaked. To fix this, when we failed in configfs_create(), manually call     configfs_put(sd) to keep the refcount correct. (CVE-2022-50751)

  - In the Linux kernel, the following vulnerability has been resolved: pstore: Avoid kcore oops by vmap()ing     with VM_IOREMAP An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore     with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va(). Unable to     handle kernel paging request at virtual address ffffff807ff2b000 Mem abort info: ESR = 0x96000006 EC =     0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation     fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs,     pgdp=0000000081d87000 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003,     pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: dm_integrity CPU:
    7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1     baa443fb8e8477896a370b31a821eb2009f9bfba Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a0400009     (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x110/0x260 lr : vread+0x194/0x294 sp :
    ffffffc013ee39d0 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000 x26: 0000000000001000     x25: ffffffc0085a2000 x24: ffffff802d4b3000 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21:
    ffffffc0085a2000 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000 x17: 0000000000000000     x16: 0000000000000000 x15: ffffffd3073f2e60 x14: ffffffffad588000 x13: 0000000000000000 x12:
    0000000000000001 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b x8 : 0000000000000001     x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 :
    ffffffc013ee3a78 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000 Call trace:
    __memcpy+0x110/0x260 read_kcore+0x584/0x778 proc_reg_read+0xb4/0xe4 During early boot, memblock reserves     the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem     mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-     cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details)     with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual     address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to     vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed     to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be     directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem     mapping was never made, so accessing them via the lowmem virtual address oopses like above. Let's side-     step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops     region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap()     about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there     isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is     taken for now. (CVE-2022-50849)

  - In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount     leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it     will increase the reference count for the returned pci_dev and also decrease the reference count for the     input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to     call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error     path. (CVE-2022-50868)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: Do not call scsi_done() from     srp_abort() After scmd_eh_abort_handler() has called the SCSI LLD eh_abort_handler callback, it performs     one of the following actions: * Call scsi_queue_insert(). * Call scsi_finish_command(). * Call     scsi_eh_scmd_add(). Hence, SCSI abort handlers must not call scsi_done(). Otherwise all the above actions     would trigger a use-after-free. Hence remove the scsi_done() call from srp_abort(). Keep the     srp_free_req() call before returning SUCCESS because we may not see the command again if SUCCESS is     returned. (CVE-2023-52515)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Debian 12 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-4788 advisory.

    -------------------------------------------------------------------------     Debian LTS Advisory DLA-4788-1                debian-lts@lists.debian.org     https://www.debian.org/lts/security/                        Ben Hutchings     September 19, 2026                            https://wiki.debian.org/LTS
    -------------------------------------------------------------------------

    Package        : linux-6.12     Version        : 6.12.107-1~deb12u1     CVE ID         : CVE-2025-38525 CVE-2025-40054 CVE-2025-40074 CVE-2026-43197                      CVE-2026-53092 CVE-2026-64017 CVE-2026-64216 CVE-2026-64581                      CVE-2026-64586 CVE-2026-68082 CVE-2026-68118 CVE-2026-68132                      CVE-2026-68138 CVE-2026-68159 CVE-2026-68166 CVE-2026-68169                      CVE-2026-68198 CVE-2026-68253 CVE-2026-68254 CVE-2026-68264                      CVE-2026-68266 CVE-2026-68267 CVE-2026-68273 CVE-2026-68276                      CVE-2026-68322 CVE-2026-68367 CVE-2026-68431 CVE-2026-68451                      CVE-2026-68452 CVE-2026-68480 CVE-2026-72111 CVE-2026-74440                      CVE-2026-74441 CVE-2026-74442 CVE-2026-74443 CVE-2026-74444                      CVE-2026-74445 CVE-2026-74446 CVE-2026-74447 CVE-2026-74448                      CVE-2026-74450 CVE-2026-74451 CVE-2026-74452 CVE-2026-74453                      CVE-2026-74454 CVE-2026-74455 CVE-2026-74456 CVE-2026-74457                      CVE-2026-74458 CVE-2026-74459 CVE-2026-74460 CVE-2026-74461                      CVE-2026-74463 CVE-2026-74464 CVE-2026-74465 CVE-2026-74467                      CVE-2026-74468 CVE-2026-74469 CVE-2026-74470 CVE-2026-74471                      CVE-2026-74472 CVE-2026-74473 CVE-2026-74474 CVE-2026-74475                      CVE-2026-74476 CVE-2026-74478 CVE-2026-74479 CVE-2026-74480                      CVE-2026-74481 CVE-2026-74482 CVE-2026-74483 CVE-2026-74484                      CVE-2026-74485 CVE-2026-74487 CVE-2026-74488 CVE-2026-74490                      CVE-2026-74492 CVE-2026-74493 CVE-2026-74494 CVE-2026-74495                      CVE-2026-74497 CVE-2026-74498 CVE-2026-74499 CVE-2026-74500                      CVE-2026-74501 CVE-2026-74502 CVE-2026-74503 CVE-2026-74504                      CVE-2026-74505 CVE-2026-74507 CVE-2026-74508 CVE-2026-74509                      CVE-2026-74510 CVE-2026-74512 CVE-2026-74514 CVE-2026-74515                      CVE-2026-74516 CVE-2026-74517 CVE-2026-74518 CVE-2026-74519                      CVE-2026-74522 CVE-2026-74523 CVE-2026-74524 CVE-2026-74525                      CVE-2026-74531 CVE-2026-74532 CVE-2026-74535 CVE-2026-74536                      CVE-2026-74540 CVE-2026-74541 CVE-2026-74543 CVE-2026-74545                      CVE-2026-74546 CVE-2026-74547 CVE-2026-74548 CVE-2026-74549                      CVE-2026-74550 CVE-2026-74551 CVE-2026-74552 CVE-2026-74553                      CVE-2026-74555 CVE-2026-74556 CVE-2026-74557 CVE-2026-74563                      CVE-2026-74564 CVE-2026-74565 CVE-2026-74566 CVE-2026-74567                      CVE-2026-74569 CVE-2026-74572 CVE-2026-74574 CVE-2026-74575                      CVE-2026-74576 CVE-2026-74577 CVE-2026-74579 CVE-2026-74580                      CVE-2026-74581 CVE-2026-74582 CVE-2026-74583 CVE-2026-74585                      CVE-2026-74586 CVE-2026-74587 CVE-2026-74588 CVE-2026-74589                      CVE-2026-74590 CVE-2026-74592 CVE-2026-74594 CVE-2026-74595                      CVE-2026-74597 CVE-2026-74598 CVE-2026-74599 CVE-2026-74601                      CVE-2026-74602 CVE-2026-74603 CVE-2026-74604 CVE-2026-74606                      CVE-2026-74607 CVE-2026-74608 CVE-2026-74609 CVE-2026-74610                      CVE-2026-74612 CVE-2026-74613 CVE-2026-74614 CVE-2026-74615                      CVE-2026-74616 CVE-2026-74618 CVE-2026-74619 CVE-2026-74620                      CVE-2026-74621 CVE-2026-74622 CVE-2026-74623 CVE-2026-74624                      CVE-2026-74625 CVE-2026-74626 CVE-2026-74628 CVE-2026-74630                      CVE-2026-74631 CVE-2026-74632 CVE-2026-74634 CVE-2026-74635                      CVE-2026-74636 CVE-2026-74637 CVE-2026-74641 CVE-2026-74644                      CVE-2026-74646 CVE-2026-74647 CVE-2026-74648 CVE-2026-74649                      CVE-2026-74650 CVE-2026-74651 CVE-2026-74653 CVE-2026-74654                      CVE-2026-74655 CVE-2026-74656 CVE-2026-74657 CVE-2026-74658                      CVE-2026-74659 CVE-2026-74660 CVE-2026-74661 CVE-2026-74662                      CVE-2026-74663 CVE-2026-74664 CVE-2026-74665 CVE-2026-74666                      CVE-2026-74667 CVE-2026-74668 CVE-2026-74669 CVE-2026-74670                      CVE-2026-74671 CVE-2026-74672 CVE-2026-74673 CVE-2026-74675                      CVE-2026-74676 CVE-2026-74677 CVE-2026-74678 CVE-2026-74679                      CVE-2026-74680 CVE-2026-74682 CVE-2026-74683 CVE-2026-74684                      CVE-2026-74685 CVE-2026-74688 CVE-2026-74689 CVE-2026-74691                      CVE-2026-74692 CVE-2026-74693 CVE-2026-74694 CVE-2026-74696                      CVE-2026-74700 CVE-2026-74701 CVE-2026-74704 CVE-2026-74705                      CVE-2026-74710 CVE-2026-74712 CVE-2026-74714 CVE-2026-74717                      CVE-2026-74718 CVE-2026-74719 CVE-2026-74720 CVE-2026-74722                      CVE-2026-74724 CVE-2026-74725 CVE-2026-74726 CVE-2026-74730                      CVE-2026-74732 CVE-2026-74736 CVE-2026-74737 CVE-2026-74739                      CVE-2026-74740 CVE-2026-74742 CVE-2026-74743 CVE-2026-74744                      CVE-2026-74746 CVE-2026-74748 CVE-2026-80522 CVE-2026-80525                      CVE-2026-80526 CVE-2026-80527 CVE-2026-80528 CVE-2026-80529                      CVE-2026-80530 CVE-2026-80531 CVE-2026-80532 CVE-2026-80533                      CVE-2026-80534 CVE-2026-80535 CVE-2026-80536 CVE-2026-80539                      CVE-2026-80540 CVE-2026-80541 CVE-2026-80547 CVE-2026-80548                      CVE-2026-80549 CVE-2026-80550 CVE-2026-80551 CVE-2026-80552                      CVE-2026-80553 CVE-2026-80554 CVE-2026-80555 CVE-2026-80556                      CVE-2026-80557 CVE-2026-80558 CVE-2026-80559 CVE-2026-80560                      CVE-2026-80561 CVE-2026-80562 CVE-2026-80563 CVE-2026-80565                      CVE-2026-80566 CVE-2026-80567 CVE-2026-80568 CVE-2026-80569                      CVE-2026-80570 CVE-2026-80572 CVE-2026-80573 CVE-2026-80574                      CVE-2026-80575 CVE-2026-80576 CVE-2026-80577 CVE-2026-80578                      CVE-2026-80583 CVE-2026-80584 CVE-2026-80585 CVE-2026-80586                      CVE-2026-80587 CVE-2026-80589 CVE-2026-80590 CVE-2026-80678                      CVE-2026-80679 CVE-2026-80680 CVE-2026-80681 CVE-2026-80684                      CVE-2026-80686 CVE-2026-80689 CVE-2026-80691 CVE-2026-80694                      CVE-2026-80695 CVE-2026-80696 CVE-2026-80700 CVE-2026-80702                      CVE-2026-80703 CVE-2026-80704 CVE-2026-80706 CVE-2026-80707                      CVE-2026-80708 CVE-2026-80709 CVE-2026-80710 CVE-2026-80711                      CVE-2026-80714 CVE-2026-80715 CVE-2026-80716 CVE-2026-80717                      CVE-2026-80718 CVE-2026-80722 CVE-2026-80723 CVE-2026-80725                      CVE-2026-80726 CVE-2026-80727 CVE-2026-80728 CVE-2026-80730                      CVE-2026-80731 CVE-2026-80732 CVE-2026-80733 CVE-2026-80736                      CVE-2026-80737 CVE-2026-80739 CVE-2026-80742 CVE-2026-80743                      CVE-2026-80744 CVE-2026-80749 CVE-2026-80752 CVE-2026-80754                      CVE-2026-80756 CVE-2026-80757 CVE-2026-80759 CVE-2026-80763                      CVE-2026-80764 CVE-2026-80765 CVE-2026-80767 CVE-2026-80770                      CVE-2026-80771 CVE-2026-80772 CVE-2026-80779 CVE-2026-80781                      CVE-2026-80782 CVE-2026-80784 CVE-2026-80788 CVE-2026-80789                      CVE-2026-80790 CVE-2026-80791 CVE-2026-80792 CVE-2026-80793                      CVE-2026-80794 CVE-2026-80795 CVE-2026-80797 CVE-2026-80798                      CVE-2026-80799 CVE-2026-80800 CVE-2026-80801 CVE-2026-80802                      CVE-2026-80803 CVE-2026-80805 CVE-2026-80808 CVE-2026-80809                      CVE-2026-80812 CVE-2026-80814 CVE-2026-80815 CVE-2026-80819                      CVE-2026-80820 CVE-2026-80823 CVE-2026-80887 CVE-2026-80888                      CVE-2026-80889 CVE-2026-80890 CVE-2026-80891 CVE-2026-80892                      CVE-2026-80893 CVE-2026-80894 CVE-2026-80901 CVE-2026-80902                      CVE-2026-80903 CVE-2026-80904 CVE-2026-80906 CVE-2026-80907                      CVE-2026-80908 CVE-2026-80909 CVE-2026-80910 CVE-2026-80911                      CVE-2026-80912 CVE-2026-80913 CVE-2026-80915 CVE-2026-80916                      CVE-2026-80917 CVE-2026-80918     Debian Bug     : 1142912 1143545

    Several vulnerabilities have been discovered in the Linux kernel that     may lead to a privilege escalation, denial of service or information     leaks.

    For Debian 12 bookworm, these problems have been fixed in version     6.12.107-1~deb12u1.  This update additionally includes many more bug     fixes from stable updates 6.12.102-6.12.107, and adds drivers for     Alcor card readers.

    We recommend that you upgrade your linux-6.12 packages.

    For the detailed security status of linux-6.12 please refer to     its security tracker page at:
    https://security-tracker.debian.org/tracker/linux-6.12

    Further information about Debian LTS security advisories, how to apply     these updates to your system and frequently asked questions can be     found at: https://wiki.debian.org/LTS     Attachment:
    signature.asc     Description: PGP signature

Tenable has extracted the preceding description block directly from the Debian security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and     mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and
    __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before     initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer     dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of
    __trace_mmiotrace_rw() and __trace_mmiotrace_map(). (CVE-2026-80689)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Type	Severity
374135	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1793333110)	Nessus	Alma Linux Local Security Checks	Local	high
374124	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1792976962)	Nessus	CentOS Local Security Checks	Local	high
366919	Debian dla-4841 : ata-modules-6.1.0-53-armmp-di - security update	Nessus	Debian Local Security Checks	Local	high
348574	Debian dla-4788 : ata-modules-6.12.100+deb12-armmp-di - security update	Nessus	Debian Local Security Checks	Local	medium
341899	Amazon Linux 2023 : bpftool6.12, kernel6.12, kernel6.12-devel (ALAS2023-2026-2110)	Nessus	Amazon Linux Local Security Checks	Local	medium
341888	Amazon Linux 2023 : bpftool6.18, kernel6.18, kernel6.18-devel (ALAS2023-2026-2106)	Nessus	Amazon Linux Local Security Checks	Local	high
341297	Linux Distros Unpatched Vulnerability : CVE-2026-80689	Nessus	Misc.	Local	medium

Detections

Analytics

CVE-2026-80689

medium

Tenable Plugins

high

high

high

medium

medium

high

medium