In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2026:0317-1 advisory.

    The SUSE Linux Enterprise 15 SP5 kernel was updated to fix various security issues

    The following security issues were fixed:

    - CVE-2022-50630: mm: hugetlb: fix UAF in hugetlb_handle_userfault (bsc#1254785).
    - CVE-2022-50700: wifi: ath10k: Delay the unmapping of the buffer (bsc#1255576).
    - CVE-2023-53254: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels (bsc#1249871).
    - CVE-2023-53781: smc: Fix use-after-free in tcp_write_timer_handler() (bsc#1254751).
    - CVE-2024-56590: Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packet (bsc#1235038).
    - CVE-2025-39977: futex: Prevent use-after-free during requeue-PI (bsc#1252046).
    - CVE-2025-40019: crypto: essiv - Check ssize for decryption and in-place encryption (bsc#1252678).
    - CVE-2025-40139: smc: Use __sk_dst_get() and dst_dev_rcu() in in smc_clc_prfx_set() (bsc#1253409).
    - CVE-2025-40215: kABI: xfrm: delete x->tunnel as we delete x (bsc#1254959).
    - CVE-2025-40220: fuse: fix livelock in synchronous file put from fuseblk workers (bsc#1254520).
    - CVE-2025-40233: ocfs2: clear extent cache after moving/defragmenting extents (bsc#1254813).
    - CVE-2025-40258: mptcp: fix race condition in mptcp_schedule_work() (bsc#1254843).
    - CVE-2025-40277: drm/vmwgfx: Validate command header size against (bsc#1254894).
    - CVE-2025-40280: tipc: Fix use-after-free in tipc_mon_reinit_self() (bsc#1254847).
    - CVE-2025-40331: sctp: Prevent TOCTOU out-of-bounds write (bsc#1254615).
    - CVE-2025-68732: gpu: host1x: Fix race in syncpt alloc/free (bsc#1255688).

    The following non security issues were fixed:

    - ACPI/IORT: Fix memory leak in iort_rmr_alloc_sids() (git-fixes).
    - ACPI: PRM: Remove unnecessary strict handler address checks (git-fixes).
    - ACPI: property: Do not pass NULL handles to acpi_attach_data() (git-fixes).
    - ACPI: property: Fix buffer properties extraction for subnodes (git-fixes).
    - KVM: SVM: Fix TSC_AUX virtualization setup (git-fixes).
    - RDMA/cm: Rate limit destroy CM ID timeout error message (git-fixes).
    - RDMA/counter: Check CAP_NET_RAW check in user namespace for RDMA counters (git-fixes).
    - RDMA/hns: Fix the modification of max_send_sge (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for anchor create (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for devx create (git-fixes).
    - RDMA/mlx5: Check CAP_NET_RAW in user namespace for flow create (git-fixes).
    - RDMA/mlx5: Fix compilation warning when USER_ACCESS isn't set (git-fixes).
    - RDMA/nldev: Check CAP_NET_RAW in user namespace for QP modify (git-fixes).
    - RDMA/uverbs: Add empty rdma_uattrs_has_raw_cap() declaration (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for QP create (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for RAW QP create (git-fixes).
    - RDMA/uverbs: Check CAP_NET_RAW in user namespace for flow create (git-fixes).
    - arch/idle: Change arch_cpu_idle() behavior: always exit with IRQs disabled (git-fixes).
    - cpuidle/poll: Ensure IRQs stay disabled after cpuidle_state::enter() calls (git-fixes).
    - cpuidle: Move IRQ state validation (git-fixes).
    - cpuidle: haltpoll: Do not enable interrupts when entering idle (git-fixes).
    - dm: free table mempools if not used in __bind (git-fixes).
    - padata: Honor the caller's alignment in case of chunk_size 0 (bsc#1237563).
    - platform/x86/intel-uncore-freq: Fail module load when plat_info is NULL (git-fixes).
    - x86/bugs: Fix RSB clearing in indirect_branch_prediction_barrier() (git-fixes).
    - x86/bugs: Use SBPB in write_ibpb() if applicable (git-fixes).
    - x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT (git-fixes).
    - x86/tdx: Drop flags from __tdx_hypercall() (git-fixes).
    - x86/tdx: Dynamically disable SEPT violations from causing #VEs (git-fixes).
    - x86/tdx: Emit warning if IRQs are enabled during HLT #VE handling (git-fixes).
    - x86/tdx: Extend TDX_MODULE_CALL to support more TDCALL/SEAMCALL leafs (git-fixes).
    - x86/tdx: Fix __noreturn build warning around __tdx_hypercall_failed() (git-fixes).
    - x86/tdx: Fix arch_safe_halt() execution for TDX VMs (git-fixes).
    - x86/tdx: Introduce wrappers to read and write TD metadata (git-fixes).
    - x86/tdx: Make TDX_HYPERCALL asm similar to TDX_MODULE_CALL (git-fixes).
    - x86/tdx: Make macros of TDCALLs consistent with the spec (git-fixes).
    - x86/tdx: Pass TDCALL/SEAMCALL input/output registers via a structure (git-fixes).
    - x86/tdx: Reimplement __tdx_hypercall() using TDX_MODULE_CALL asm (git-fixes).
    - x86/tdx: Remove 'struct tdx_hypercall_args' (git-fixes).
    - x86/tdx: Remove TDX_HCALL_ISSUE_STI (git-fixes).
    - x86/tdx: Rename __tdx_module_call() to __tdcall() (git-fixes).
    - x86/tdx: Rename tdx_parse_tdinfo() to tdx_setup() (git-fixes).
    - x86/tdx: Retry partially-completed page conversion hypercalls (git-fixes).
    - x86/tdx: Skip saving output regs when SEAMCALL fails with VMFailInvalid (git-fixes).
    - x86/tdx: Zero out the missing RSI in TDX_HYPERCALL macro (git-fixes).
    - x86/virt/tdx: Make TDX_MODULE_CALL handle SEAMCALL #UD and #GP (git-fixes).
    - x86/virt/tdx: Wire up basic SEAMCALL functions (git-fixes).
    - xfs: fix sparse inode limits on runt AG (bsc#1254392).

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is     ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set     ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, failed to find the peer with peer_id %d\n,     ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START     in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the     peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check if     (ppdu_info->peer_id == HAL_INVALID_PEERID in the loop, and then the log failed to find the peer with     peer_id 0 print after the check in the loop, it is below call stack when debug_mask is set     ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 (ath11k: decode HE status tlv) add     memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info)) in ath11k_dp_rx_process_mon_status(), but the     commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of     the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k]     [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7     80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8     fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX:
    ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
    ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000     [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13:
    ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000)     GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0:
    0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0     [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50     [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50     [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ?     ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681]     ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k]     [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860]     call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k]     [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ?     lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093]
    __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165]     sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225]     asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after     memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(),     then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI     WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 (CVE-2022-50665)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Severity
297191	SUSE SLES15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2026:0317-1)	Nessus	SuSE Local Security Checks	high
277969	Linux Distros Unpatched Vulnerability : CVE-2022-50665	Nessus	Misc.	medium

Detections

Analytics

CVE-2022-50665

medium

Tenable Plugins

high

medium