In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2025:1241-1 advisory.

    The SUSE Linux Enterprise 15 SP5 kernel was updated to receive various security bugfixes.

    The following security bugs were fixed:

    - CVE-2022-49053: scsi: target: tcmu: Fix possible page UAF (bsc#1237918).
    - CVE-2022-49465: blk-throttle: Set BIO_THROTTLED when bio has been throttled (bsc#1238919).
    - CVE-2022-49739: gfs2: Always check inode size of inline inodes (bsc#1240207).
    - CVE-2023-52935: mm/khugepaged: fix ->anon_vma race (bsc#1240276).
    - CVE-2024-53124: net: fix data-races around sk->sk_forward_alloc (bsc#1234074).
    - CVE-2024-53176: smb: During unmount, ensure all cached dir instances drop their dentry (bsc#1234894).
    - CVE-2024-53178: smb: Do not leak cfid when reconnect races with open_cached_dir (bsc#1234895).
    - CVE-2024-56651: can: hi311x: hi3110_can_ist(): fix potential use-after-free (bsc#1235528).
    - CVE-2024-57996: net_sched: sch_sfq: do not allow 1 packet limit (bsc#1239076).
    - CVE-2024-58013: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync     (bsc#1239095).
    - CVE-2024-58014: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() (bsc#1239109).
    - CVE-2025-21693: mm: zswap: properly synchronize freeing resources during CPU hotunplug (bsc#1237029).
    - CVE-2025-21718: net: rose: fix timer races against user threads (bsc#1239073).
    - CVE-2025-21772: partitions: mac: fix handling of bogus partition table (bsc#1238911).
    - CVE-2025-21780: drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table() (bsc#1239115).


Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote SUSE Linux SLES15 / SLES_SAP15 host has packages installed that are affected by multiple vulnerabilities as referenced in the SUSE-SU-2025:1027-1 advisory.

    The SUSE Linux Enterprise 15 SP4 kernel was updated to receive various security bugfixes.


    The following security bugs were fixed:

    - CVE-2024-2201: Fixed information leak in x86/BHI (bsc#1217339).
    - CVE-2024-41092: drm/i915/gt: Fix potential UAF by revoke of fence registers (bsc#1228483).
    - CVE-2024-42098: crypto: ecdh - explicitly zeroize private_key (bsc#1228779).
    - CVE-2024-42229: crypto: aead,cipher - zeroize key buffer after use (bsc#1228708).
    - CVE-2024-57996: net_sched: sch_sfq: do not allow 1 packet limit (bsc#1239076).
    - CVE-2024-58014: wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() (bsc#1239109).
    - CVE-2025-21718: net: rose: fix timer races against user threads (bsc#1239073).
    - CVE-2025-21780: drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table() (bsc#1239115).


Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 (powerpc/mm: Show if a bad page     fault on data is read or write.) we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to     determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults,     aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value.
    All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR to an     undefined value. As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content     either. This manifests as accesses that should be a read being incorrectly reported as writes, for     example, using the xmon dump command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6]     BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting     instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc:
    c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di     c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the     data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value     we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page     fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the     cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [     721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6]     Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at     [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at     0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data     SLB Access) at [c00000000ffbf390] (CVE-2022-49214)

Note that Nessus relies on the presence of the package as reported by the vendor.

The remote Redhat Enterprise Linux 9 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2023:2458 advisory.

    The kernel packages contain the Linux kernel, the core of any Linux operating system.

    Security Fix(es):

    * use-after-free in l2cap_connect and l2cap_le_connect_req in net/bluetooth/l2cap_core.c (CVE-2022-42896)

    * net/ulp: use-after-free in listening ULP sockets (CVE-2023-0461)

    * cpu: AMD CPUs may transiently execute beyond unconditional direct branch (CVE-2021-26341)

    * malicious data for FBIOPUT_VSCREENINFO ioctl may cause OOB write memory (CVE-2021-33655)

    * possible race condition in drivers/tty/tty_buffers.c (CVE-2022-1462)

    * KVM: NULL pointer dereference in kvm_mmu_invpcid_gva (CVE-2022-1789)

    * use-after-free in free_pipe_info() could lead to privilege escalation (CVE-2022-1882)

    * KVM: nVMX: missing IBPB when exiting from nested guest can lead to Spectre v2 attacks (CVE-2022-2196)

    * netfilter: nf_conntrack_irc message handling issue (CVE-2022-2663)

    * race condition in xfrm_probe_algs can lead to OOB read/write (CVE-2022-3028)

    * out-of-bounds read in fib_nh_match of the file net/ipv4/fib_semantics.c (CVE-2022-3435)

    * race condition in hugetlb_no_page() in mm/hugetlb.c (CVE-2022-3522)

    * memory leak in ipv6_renew_options() (CVE-2022-3524)

    * data races around icsk->icsk_af_ops in do_ipv6_setsockopt (CVE-2022-3566)

    * data races around sk->sk_prot (CVE-2022-3567)

    * memory leak in l2cap_recv_acldata of the file net/bluetooth/l2cap_core.c (CVE-2022-3619)

    * denial of service in follow_page_pte in mm/gup.c due to poisoned pte entry (CVE-2022-3623)

    * use-after-free after failed devlink reload in devlink_param_get (CVE-2022-3625)

    * USB-accessible buffer overflow in brcmfmac (CVE-2022-3628)

    * use after free flaw in l2cap_conn_del in net/bluetooth/l2cap_core.c (CVE-2022-3640)

    * Double-free in split_2MB_gtt_entry when function intel_gvt_dma_map_guest_page failed (CVE-2022-3707)

    * mptcp: NULL pointer dereference in subflow traversal at disconnect time (CVE-2022-4128)

    * l2tp: missing lock when clearing sk_user_data can lead to NULL pointer dereference (CVE-2022-4129)

    * igmp: use-after-free in ip_check_mc_rcu when opening and closing inet sockets (CVE-2022-20141)

    * lockdown bypass using IMA (CVE-2022-21505)

    * double free in usb_8dev_start_xmit in drivers/net/can/usb/usb_8dev.c (CVE-2022-28388)

    * network backend may cause Linux netfront to use freed SKBs (XSA-405) (CVE-2022-33743)

    * unmap_mapping_range() race with munmap() on VM_PFNMAP mappings leads to stale TLB entry (CVE-2022-39188)

    * TLB flush operations are mishandled in certain KVM_VCPU_PREEMPTED leading to guest malfunctioning     (CVE-2022-39189)

    * u8 overflow problem in cfg80211_update_notlisted_nontrans() (CVE-2022-41674)

    * use-after-free related to leaf anon_vma double reuse (CVE-2022-42703)

    * use-after-free in bss_ref_get in net/wireless/scan.c (CVE-2022-42720)

    * BSS list corruption in cfg80211_add_nontrans_list in net/wireless/scan.c (CVE-2022-42721)

    * Denial of service in beacon protection for P2P-device (CVE-2022-42722)

    * memory corruption in usbmon driver (CVE-2022-43750)

    * NULL pointer dereference in traffic control subsystem (CVE-2022-47929)

    * NULL pointer dereference in rawv6_push_pending_frames (CVE-2023-0394)

    * use-after-free due to race condition in qdisc_graft() (CVE-2023-0590)

    * use-after-free caused by invalid pointer hostname in fs/cifs/connect.c (CVE-2023-1195)

    * denial of service in tipc_conn_close (CVE-2023-1382)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

    Additional Changes:

    For detailed information on changes in this release, see the Red Hat Enterprise Linux 9.2 Release Notes     linked from the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
234407	SUSE SLES15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2025:1241-1)	Nessus	SuSE Local Security Checks	high
233410	SUSE SLES15: cluster-md-kmp-default / dlm-kmp-default / gfs2-kmp-default / etc (SUSE-SU-2025:1027-1)	Nessus	SuSE Local Security Checks	high
225145	Linux Distros Unpatched Vulnerability : CVE-2022-49214	Nessus	Misc.	medium
175477	RHEL 9 : kernel (RHSA-2023:2458)	Nessus	Red Hat Local Security Checks	high

Detections

Analytics

CVE-2022-49214

medium

Tenable Plugins

high

high

medium

high