An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.

According to the versions of the qemu package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a     denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD)     list. (CVE-2015-8558)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for     CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and     other unexpected results. Affected QEMU version: 6.2.0. (CVE-2022-26353)

  - A flaw was found in the QEMU virtual crypto device while handling data encryption/decryption requests in     virtio_crypto_handle_sym_req. There is no check for the value of `src_len` and `dst_len` in     virtio_crypto_sym_op_helper, potentially leading to a heap buffer overflow when the two values differ.
    (CVE-2023-3180)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the qemu-kvm packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a     denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD)     list. (CVE-2015-8558)

  - Memory leak in the v9fs_xattrcreate function in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local     guest OS administrators to cause a denial of service (memory consumption and QEMU process crash) via a     large number of Txattrcreate messages with the same fid number. (CVE-2016-9102)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access by providing an     address near the end of the PCI configuration space. (CVE-2020-13791)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - A NULL pointer dereference flaw was found in the megasas-gen2 SCSI host bus adapter emulation of QEMU in     versions before and including 6.0. This issue occurs in the megasas_command_cancelled() callback function     while dropping a SCSI request. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. The highest threat from this vulnerability is to system     availability. (CVE-2020-35503)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator     of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw     allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a     denial of service. The highest threat from this vulnerability is to system availability. (CVE-2021-20255)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

  - A heap buffer overflow was found in the floppy disk emulator of QEMU up to 6.0.0 (including). It could     occur in fdctrl_transfer_handler() in hw/block/fdc.c while processing DMA read data transfers from the     floppy drive to the guest system. A privileged guest user could use this flaw to crash the QEMU process on     the host resulting in DoS scenario, or potential information leakage from the host memory. (CVE-2021-3507)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

  - A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the     Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be     written to the controller's registers and trigger undesirable actions (such as reset) while the device is     still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could     use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or     potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects     QEMU versions before 7.0.0. (CVE-2021-3750)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc()     function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer     overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or     potentially execute arbitrary code within the context of the QEMU process. (CVE-2021-4206)

  - A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for     CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and     other unexpected results. Affected QEMU version: 6.2.0. (CVE-2022-26353)

  - An out-of-bounds read flaw was found in the QXL display device emulation in QEMU. The qxl_phys2virt()     function does not check the size of the structure pointed to by the guest physical address, potentially     reading past the end of the bar space into adjacent pages. A malicious guest user could use this flaw to     crash the QEMU process on the host causing a denial of service condition. (CVE-2022-4144)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Debian 10 host has packages installed that are affected by multiple vulnerabilities as referenced in the dla-3099 advisory.

  - sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an unvalidated address, which leads to an out-of-bounds read     during sdhci_write() operations. A guest OS user can crash the QEMU process. (CVE-2020-13253)

  - In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer     dereference. (CVE-2020-15469)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host     controller driver. (CVE-2020-25624)

  - hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop. (CVE-2020-25625)

  - A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while     processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user     within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host,     resulting in a denial of service. (CVE-2020-25723)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.
    (CVE-2020-28916)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

  - A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI     I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req'     from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
    (CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A heap buffer overflow was found in the floppy disk emulator of QEMU up to 6.0.0 (including). It could     occur in fdctrl_transfer_handler() in hw/block/fdc.c while processing DMA read data transfers from the     floppy drive to the guest system. A privileged guest user could use this flaw to crash the QEMU process on     the host resulting in DoS scenario, or potential information leakage from the host memory. (CVE-2021-3507)

  - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a     single, large transfer request, to reduce the overhead and improve performance. The combined size of the     bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper     validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the     array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a     denial of service. (CVE-2021-3527)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while     handling a PVRDMA_CMD_CREATE_MR command due to improper memory remapping (mremap). This flaw allows a     malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to     system availability. (CVE-2021-3582)

  - An integer overflow was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions     prior to 6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest due to     improper input validation. This flaw allows a privileged guest user to make QEMU allocate a large amount     of memory, resulting in a denial of service. The highest threat from this vulnerability is to system     availability. (CVE-2021-3607)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to     6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest and may result in a     crash of QEMU or cause undefined behavior due to the access of an uninitialized pointer. The highest     threat from this vulnerability is to system availability. (CVE-2021-3608)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc()     function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer     overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or     potentially execute arbitrary code within the context of the QEMU process. (CVE-2021-4206)

  - A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values     `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object     followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw     to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU     process. (CVE-2021-4207)

  - A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached     from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results.
    Affected QEMU versions <= 6.2.0. (CVE-2022-26354)

  - softmmu/physmem.c in QEMU through 7.0.0 can perform an uninitialized read on the translate_fail path,     leading to an io_readx or io_writex crash. (CVE-2022-35414)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host is affected by the vulnerability described in GLSA-202208-27 (QEMU: Multiple Vulnerabilities)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - hw/net/xgmac.c in the XGMAC Ethernet controller in QEMU before 07-20-2020 has a buffer overflow. This     occurs during packet transmission and affects the highbank and midway emulated machines. A guest user or     process could use this flaw to crash the QEMU process on the host, resulting in a denial of service or     potential privileged code execution. This was fixed in commit 5519724a13664b43e225ca05351c60b4468e4555.
    (CVE-2020-15863)

  - In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects     the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the     QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in     hw/net/net_tx_pkt.c. (CVE-2020-16092)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A use-after-free vulnerability was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0 during the handling of the 'Information Transfer' command (CMD_TI). This flaw allows     a privileged guest user to crash the QEMU process on the host, resulting in a denial of service or     potential code execution with the privileges of the QEMU process. (CVE-2020-35506)

  - A flaw was found in qemu. A host privilege escalation issue was found in the virtio-fs shared file system     daemon where a privileged guest user is able to create a device special file in the shared directory and     use it to r/w access host devices. (CVE-2020-35517)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing     transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid     values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The     highest threat from this vulnerability is to system availability. (CVE-2021-20257)

  - A flaw was found in the virtio-fs shared file system daemon (virtiofsd) of QEMU. The new 'xattrmap' option     may cause the 'security.capability' xattr in the guest to not drop on file write, potentially leading to a     modified, privileged executable in the guest. In rare circumstances, this flaw could be used by a     malicious user to elevate their privileges within the guest. (CVE-2021-20263)

  - The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to     the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This     flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of     service or potential code execution. QEMU up to (including) 5.2.0 is affected by this. (CVE-2021-3409)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a     single, large transfer request, to reduce the overhead and improve performance. The combined size of the     bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper     validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the     array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a     denial of service. (CVE-2021-3527)

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while     handling a PVRDMA_CMD_CREATE_MR command due to improper memory remapping (mremap). This flaw allows a     malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to     system availability. (CVE-2021-3582)

  - An integer overflow was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions     prior to 6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest due to     improper input validation. This flaw allows a privileged guest user to make QEMU allocate a large amount     of memory, resulting in a denial of service. The highest threat from this vulnerability is to system     availability. (CVE-2021-3607)

  - A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device in versions prior to     6.1.0. The issue occurs while handling a PVRDMA_REG_DSRHIGH write from the guest and may result in a     crash of QEMU or cause undefined behavior due to the access of an uninitialized pointer. The highest     threat from this vulnerability is to system availability. (CVE-2021-3608)

  - A stack overflow vulnerability was found in the Intel HD Audio device (intel-hda) of QEMU. A malicious     guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service     condition. The highest threat from this vulnerability is to system availability. This flaw affects QEMU     versions prior to 7.0.0. (CVE-2021-3611)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

  - A DMA reentrancy issue was found in the USB EHCI controller emulation of QEMU. EHCI does not verify if the     Buffer Pointer overlaps with its MMIO region when it transfers the USB packets. Crafted content may be     written to the controller's registers and trigger undesirable actions (such as reset) while the device is     still transferring packets. This can ultimately lead to a use-after-free issue. A malicious guest could     use this flaw to crash the QEMU process on the host, resulting in a denial of service condition, or     potentially execute arbitrary code within the context of the QEMU process on the host. This flaw affects     QEMU versions before 7.0.0. (CVE-2021-3750)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A stack-buffer-overflow was found in QEMU in the NVME component. The flaw lies in nvme_changed_nslist()     where a malicious guest controlling certain input can read out of bounds memory. A malicious user could     use this flaw leading to disclosure of sensitive information. (CVE-2021-3947)

  - A NULL pointer dereference issue was found in the block mirror layer of QEMU in versions prior to 6.2.0.
    The `self` pointer is dereferenced in mirror_wait_on_conflicts() without ensuring that it's not NULL. A     malicious unprivileged user within the guest could use this flaw to crash the QEMU process on the host     when writing data reaches the threshold of mirroring node. (CVE-2021-4145)

  - A flaw was found in the QXL display device emulation in QEMU. An integer overflow in the cursor_alloc()     function can lead to the allocation of a small cursor object followed by a subsequent heap-based buffer     overflow. This flaw allows a malicious privileged guest user to crash the QEMU process on the host or     potentially execute arbitrary code within the context of the QEMU process. (CVE-2021-4206)

  - A flaw was found in the QXL display device emulation in QEMU. A double fetch of guest controlled values     `cursor->header.width` and `cursor->header.height` can lead to the allocation of a small cursor object     followed by a subsequent heap-based buffer overflow. A malicious privileged guest user could use this flaw     to crash the QEMU process on the host or potentially execute arbitrary code within the context of the QEMU     process. (CVE-2021-4207)

  - A flaw was found in the virtio-net device of QEMU. This flaw was inadvertently introduced with the fix for     CVE-2021-3748, which forgot to unmap the cached virtqueue elements on error, leading to memory leakage and     other unexpected results. Affected QEMU version: 6.2.0. (CVE-2022-26353)

  - A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached     from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results.
    Affected QEMU versions <= 6.2.0. (CVE-2022-26354)

  -  Please review the referenced CVE identifiers for details.  (CVE-2021-3929)

  - QEMU: NULL pointer dereference in pci_write() in hw/acpi/pcihp.c (CVE-2021-4158)

  - QEMU: virtiofsd: potential privilege escalation via CVE-2018-13405 (CVE-2022-0358)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the qemu packages installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL     dereference) when the command header 'ad->cur_cmd' is null. (CVE-2019-12067)

  - QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e     packet with the data's address set to the e1000e's MMIO address. (CVE-2020-15859)

  - QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not     checked. (CVE-2020-25084)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator     of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw     allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a     denial of service. The highest threat from this vulnerability is to system availability. (CVE-2021-20255)

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - A use-after-free vulnerability was found in the virtio-net device of QEMU. It could occur when the     descriptor's address belongs to the non direct access region, due to num_buffers being set after the     virtqueue elem has been unmapped. A malicious guest could use this flaw to crash QEMU, resulting in a     denial of service condition, or potentially execute code on the host with the privileges of the QEMU     process. (CVE-2021-3748)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Ubuntu 18.04 LTS / 20.04 LTS / 21.10 host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-5307-1 advisory.

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2022-9172 advisory.

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - slirp.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29130)

  - QEMU: net: e1000: infinite loop while processing transmit descriptors (CVE-2021-20257)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - A stack-buffer-overflow was found in QEMU in the NVME component. The flaw lies in nvme_changed_nslist()     where a malicious guest controlling certain input can read out of bounds memory. A malicious user could     use this flaw leading to disclosure of sensitive information. (CVE-2021-3947)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the udp_input() function and could occur while processing a udp packet that is smaller than the     size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3594)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the bootp_input() function and could occur while processing a udp packet that is smaller than     the size of the 'bootp_t' structure. A malicious guest could use this flaw to leak 10 bytes of     uninitialized heap memory from the host. The highest threat from this vulnerability is to data     confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3592)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the udp6_input() function and could occur while processing a udp packet that is smaller than the     size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3593)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the tftp_input() function and could occur while processing a udp packet that is smaller than the     size of the 'tftp_t' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3595)

  - An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE     SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious     guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.
    (CVE-2021-3930)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The remote Oracle Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the ELSA-2022-9123 advisory.

  - A stack-buffer-overflow was found in QEMU in the NVME component. The flaw lies in nvme_changed_nslist()     where a malicious guest controlling certain input can read out of bounds memory. A malicious user could     use this flaw leading to disclosure of sensitive information. (CVE-2021-3947)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A NULL pointer dereference issue was found in the ACPI code of QEMU. A malicious, privileged user within     the guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service     condition. (CVE-2021-4158)

  - A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while     processing read/write ioport commands if the selected floppy drive is not initialized with a block device.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2021-20196)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the qemu package installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - The ahci_commit_buf function in ide/ahci.c in QEMU allows attackers to cause a denial of service (NULL     dereference) when the command header 'ad->cur_cmd' is null. (CVE-2019-12067)

  - hw/pci/msix.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access via a crafted address     in an msi-x mmio operation. (CVE-2020-13754)

  - QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c     mishandles a write operation in the SDHC_BLKSIZE case. (CVE-2020-25085)

  - pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because     pci_get_bus() might not return a valid pointer. (CVE-2020-25742)

  - hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check     before an ide_cancel_dma_sync call. (CVE-2020-25743)

  - eth_get_gso_type in net/eth.c in QEMU 4.2.1 allows guest OS users to trigger an assertion failure. A guest     can crash the QEMU process via packet data that lacks a valid Layer 3 protocol. (CVE-2020-27617)

  - A flaw was found in the memory management API of QEMU during the initialization of a memory region cache.
    This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO     operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial     of service. This flaw affects QEMU versions prior to 5.2.0. (CVE-2020-27821)

  - ncsi.c in libslirp through 4.3.1 has a buffer over-read because it tries to read a certain amount of     header data even if that exceeds the total packet length. (CVE-2020-29129)

  - ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer     index is not validated. (CVE-2020-29443)

  - A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0.
    This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of     service. The highest threat from this vulnerability is to system availability. (CVE-2020-35504)

  - A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in     versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw     allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service.
    The highest threat from this vulnerability is to system availability. (CVE-2020-35505)

  - A race condition flaw was found in the 9pfs server implementation of QEMU up to and including 5.2.0. This     flaw allows a malicious 9p client to cause a use-after-free error, potentially escalating their privileges     on the system. The highest threat from this vulnerability is to confidentiality, integrity as well as     system availability. (CVE-2021-20181)

  - An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It     may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A     privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.
    (CVE-2021-20203)

  - An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of     QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an     interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said     issue while updating controller state fields and their subsequent processing. A privileged guest user may     use this flaw to crash the QEMU process on the host resulting in DoS scenario. (CVE-2021-20221)

  - A use-after-free flaw was found in the MegaRAID emulator of QEMU. This issue occurs while processing SCSI     I/O requests in the case of an error mptsas_free_request() that does not dequeue the request object 'req'     from a pending requests queue. This flaw allows a privileged guest user to crash the QEMU process on the     host, resulting in a denial of service. Versions between 2.10.0 and 5.2.0 are potentially affected.
    (CVE-2021-3392)

  - A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions     up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get     bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the     host resulting in DoS scenario. (CVE-2021-3416)

  - A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a     single, large transfer request, to reduce the overhead and improve performance. The combined size of the     bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper     validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the     array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a     denial of service. (CVE-2021-3527)

  - Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions     up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-     gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime. (CVE-2021-3544)

  - An information disclosure vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw exists in virgl_cmd_get_capset_info() in contrib/vhost-     user-gpu/virgl.c and could occur due to the read of uninitialized memory. A malicious guest could exploit     this issue to leak memory from the host. (CVE-2021-3545)

  - An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of     QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET'     command from the guest. It could allow a privileged guest user to crash the QEMU process on the host,     resulting in a denial of service condition, or potential code execution with the privileges of the QEMU     process. (CVE-2021-3546)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the bootp_input() function and could occur while processing a udp packet that is smaller than     the size of the 'bootp_t' structure. A malicious guest could use this flaw to leak 10 bytes of     uninitialized heap memory from the host. The highest threat from this vulnerability is to data     confidentiality. This flaw affects libslirp versions prior to 4.6.0. (CVE-2021-3592)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the udp6_input() function and could occur while processing a udp packet that is smaller than the     size of the 'udphdr' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3593)

  - An invalid pointer initialization issue was found in the SLiRP networking implementation of QEMU. The flaw     exists in the tftp_input() function and could occur while processing a udp packet that is smaller than the     size of the 'tftp_t' structure. This issue may lead to out-of-bounds read access or indirect host memory     disclosure to the guest. The highest threat from this vulnerability is to data confidentiality. This flaw     affects libslirp versions prior to 4.6.0. (CVE-2021-3595)

  - A flaw was found in the USB redirector device emulation of QEMU in versions prior to 6.1.0-rc2. It occurs     when dropping packets during a bulk transfer from a SPICE client due to the packet queue being full. A     malicious SPICE client could use this flaw to make QEMU call free() with faked heap chunk metadata,     resulting in a crash of QEMU or potential code execution with the privileges of the QEMU process on the     host. (CVE-2021-3682)

  - An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions     prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-     bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this     flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the     host. (CVE-2021-3713)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362, bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659, bsc#1172386)

Fix OOB access in iscsi (CVE-2020-11947, bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203, bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092, bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364, bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181, bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361, bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765, bsc#1172478)

Fix qemu-testsuite failure

Fix vm migration is failing with input/output error when nfs server is disconnected (bsc#1119115)

Fix OOB access in ARM interrupt handling (CVE-2021-20221, bsc#1181933)

Fix slowness in arm32 emulation (bsc#1112499)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP packet processing (CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863, bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Drop the 'ampersand 0x25 shift altgr' line in pt-br keymap file (bsc#1129962)

Fix migration failure with error message: 'error while loading state section id 3(ram) (bsc#1154790)

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb ehci packet handling (CVE-2020-25084, bsc#1176673)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix OOB access possibility in ES1370 audio device emulation (CVE-2020-13361 bsc#1172384)

Fix OOB access in ROM loading (CVE-2020-13765 bsc#1172478)

Fix OOB access while processing USB packets (CVE-2020-14364 bsc#1175441)

Fix DoS in packet processing of various emulated NICs (CVE-2020-16092 bsc#1174641)

Fix buffer overflow in the XGMAC device (CVE-2020-15863 bsc#1174386)

Use '%service_del_postun_without_restart' instead of '%service_del_postun' to avoid 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent.
(bsc#1178565)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

Fix OOB access in sm501 device emulation (CVE-2020-12829, bsc#1172385)

Fix OOB access possibility in MegaRAID SAS 8708EM2 emulation (CVE-2020-13362 bsc#1172383)

Fix use-after-free in usb xhci packet handling (CVE-2020-25723, bsc#1178934)

Fix use-after-free in usb iehci packet handling (CVE-2020-25084, bsc#1176673)

Fix infinite loop (DoS) in usb hcd-ohci emulation (CVE-2020-25625, bsc#1176684)

Fix OOB access in usb hcd-ohci emulation (CVE-2020-25624, bsc#1176682)

Fix guest triggerable assert in shared network handling code (CVE-2020-27617, bsc#1178174)

Fix infinite loop (DoS) in e1000e device emulation (CVE-2020-28916, bsc#1179468)

Fix OOB access in atapi emulation (CVE-2020-29443, bsc#1181108)

Fix heap overflow in MSIx emulation (CVE-2020-27821, bsc#1179686)

Fix NULL pointer deref. (DoS) in mmio ops (CVE-2020-15469, bsc#1173612)

Fix infinite loop (DoS) in e1000 device emulation (CVE-2021-20257, bsc#1182577)

Fix OOB access (stack overflow) in rtl8139 NIC emulation (CVE-2021-3416, bsc#1182968)

Fix OOB access (stack overflow) in other NIC emulations (CVE-2021-3416)

Fix OOB access in SLIRP ARP/NCSI packet processing (CVE-2020-29129, bsc#1179466, CVE-2020-29130, bsc#1179467)

Fix NULL pointer dereference possibility (DoS) in MegaRAID SAS 8708EM2 emulation (CVE-2020-13659 bsc#1172386)

Fix issue where s390 guest fails to find zipl boot menu index (bsc#1183979)

Fix OOB access in iscsi (CVE-2020-11947 bsc#1180523)

Fix OOB access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fix package scripts to not use hard-coded paths for temporary working directories and log files (bsc#1182425)

Fix potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. (bsc#1178049)

Fix OOB access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Make note that this patch previously included addresses (CVE-2020-13765 bsc#1172478)

Tweaks to spec file for better formatting, and remove not needed BuildRequires for e2fsprogs-devel and libpcap-devel

Fix vfio-pci device on s390 enters error state (bsc#1179725)

Fix PCI devices are unavailable after a subsystem reset. (bsc#1179726)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Several security vulnerabilities have been discovered in QEMU, a fast processor emulator.

CVE-2021-20257

net: e1000: infinite loop while processing transmit descriptors

CVE-2021-20255

A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a denial of service.

CVE-2021-20203

An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.

CVE-2021-3416

A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions up to and including 5.2.0.
The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the host resulting in DoS scenario.

CVE-2021-3416

The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution.

For Debian 9 stretch, these problems have been fixed in version 1:2.8+dfsg-6+deb9u14.

We recommend that you upgrade your qemu packages.

For the detailed security status of qemu please refer to its security tracker page at: https://security-tracker.debian.org/tracker/qemu

NOTE: Tenable Network Security has extracted the preceding description block directly from the DLA security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

This update for qemu fixes the following issues :

  - Fixed potential privilege escalation in virtfs     (CVE-2021-20181 bsc#1182137)

  - Fixed out-of-bound access in iscsi (CVE-2020-11947     bsc#1180523)

  - Fixed out-of-bound access in vmxnet3 emulation     (CVE-2021-20203 bsc#1181639)

  - Fixed out-of-bound access in ARM interrupt handling     (CVE-2021-20221 bsc#1181933)

  - Fixed vfio-pci device on s390 enters error state     (bsc#1179717 bsc#1179719)

  - Fixed 'Failed to try-restart qemu-ga@.service' error     while updating the qemu-guest-agent. (bsc#1178565)

  - Apply fixes to qemu scsi passthrough with respect to     timeout and error conditions, including using more     correct status codes. Add more qemu tracing which helped     track down these issues (bsc#1178049)

This update was imported from the SUSE:SLE-15-SP2:Update update project.

This update for qemu fixes the following issues :

Fixed potential privilege escalation in virtfs (CVE-2021-20181 bsc#1182137)

Fixed out-of-bound access in iscsi (CVE-2020-11947 bsc#1180523)

Fixed out-of-bound access in vmxnet3 emulation (CVE-2021-20203 bsc#1181639)

Fixed out-of-bound access in ARM interrupt handling (CVE-2021-20221 bsc#1181933)

Fixed vfio-pci device on s390 enters error state (bsc#1179717 bsc#1179719)

Fixed 'Failed to try-restart qemu-ga@.service' error while updating the qemu-guest-agent. (bsc#1178565)

Apply fixes to qemu scsi passthrough with respect to timeout and error conditions, including using more correct status codes. Add more qemu tracing which helped track down these issues (bsc#1178049)

Note that Tenable Network Security has extracted the preceding description block directly from the SUSE security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

ID	Name	Product	Family	Severity
188816	EulerOS Virtualization 3.0.6.0 : qemu (EulerOS-SA-2023-3460)	Nessus	Huawei Local Security Checks	high
175217	EulerOS Virtualization 3.0.2.0 : qemu-kvm (EulerOS-SA-2023-1688)	Nessus	Huawei Local Security Checks	high
164678	Debian DLA-3099-1 : qemu - LTS security update	Nessus	Debian Local Security Checks	high
164115	GLSA-202208-27 : QEMU: Multiple Vulnerabilities	Nessus	Gentoo Local Security Checks	high
159876	EulerOS Virtualization 2.10.0 : qemu (EulerOS-SA-2022-1418)	Nessus	Huawei Local Security Checks	high
159867	EulerOS Virtualization 2.10.1 : qemu (EulerOS-SA-2022-1392)	Nessus	Huawei Local Security Checks	high
158457	Ubuntu 18.04 LTS / 20.04 LTS : QEMU vulnerabilities (USN-5307-1)	Nessus	Ubuntu Local Security Checks	high
158359	Oracle Linux 8 : kvm_utils (ELSA-2022-9172)	Nessus	Oracle Linux Local Security Checks	high
157387	Oracle Linux 7 : qemu (ELSA-2022-9123)	Nessus	Oracle Linux Local Security Checks	medium
157200	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2022-1034)	Nessus	Huawei Local Security Checks	high
157171	EulerOS 2.0 SP9 : qemu (EulerOS-SA-2022-1014)	Nessus	Huawei Local Security Checks	high
148966	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1305-1)	Nessus	SuSE Local Security Checks	high
148761	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1241-1)	Nessus	SuSE Local Security Checks	high
148758	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1240-1)	Nessus	SuSE Local Security Checks	high
148757	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1244-1)	Nessus	SuSE Local Security Checks	high
148752	SUSE SLES15 Security Update : qemu (SUSE-SU-2021:1245-1)	Nessus	SuSE Local Security Checks	high
148751	SUSE SLES12 Security Update : qemu (SUSE-SU-2021:1242-1)	Nessus	SuSE Local Security Checks	high
148442	Debian DLA-2623-1 : qemu security update	Nessus	Debian Local Security Checks	medium
146938	openSUSE Security Update : qemu (openSUSE-2021-363)	Nessus	SuSE Local Security Checks	high
146643	SUSE SLED15 / SLES15 Security Update : qemu (SUSE-SU-2021:0521-1)	Nessus	SuSE Local Security Checks	high

Detections

Analytics

CVE-2021-20203

low

Tenable Plugins

high

high

high

high

high

high

high

high

medium

high

high

high

high

high

high

high

high

medium

high

high