libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an SGI buffer overflow.

The remote Alibaba Cloud Linux 3 host has packages installed that are affected by multiple vulnerabilities as referenced in the ALINUX3-SA-2022:0012 advisory.

    Package updates are available for Alibaba Cloud Linux 3 that fix the following vulnerabilities:

    CVE-2019-16865:
    An issue was discovered in Pillow before 6.2.0. When reading specially crafted invalid image files, the     library can either allocate very large amounts of memory or take an extremely long period of time to     process the image.

    CVE-2020-11538:
    In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a number of out-of-bounds reads exist in the parsing     of SGI image files, a different issue than CVE-2020-5311.

    CVE-2020-35655:
    In Pillow before 8.1.0, SGIRleDecode has a 4-byte buffer over-read when decoding crafted SGI RLE image     files because offsets and length tables are mishandled.

    CVE-2020-5311:
    libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an SGI buffer overflow.

    CVE-2020-5313:
    libImaging/FliDecode.c in Pillow before 6.2.2 has an FLI buffer overflow.

    CVE-2021-27921:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for a BLP container, and thus an attempted     memory allocation can be very large.

    CVE-2021-27923:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICO container, and thus an attempted     memory allocation can be very large.

    CVE-2021-28676:
    An issue was discovered in Pillow before 8.2.0. For FLI data, FliDecode did not properly check that the     block advance was non-zero, potentially leading to an infinite loop on load.

    CVE-2021-28678:
    An issue was discovered in Pillow before 8.2.0. For BLP data, BlpImagePlugin did not properly check that     reads (after jumping to file offsets) returned data. This could lead to a DoS where the decoder could be     run a large number of times on empty data.

    CVE-2021-34552:
    Pillow through 8.2.0 and PIL (aka Python Imaging Library) through 1.1.7 allow an attacker to pass     controlled parameters directly into a convert function to trigger a buffer overflow in Convert.c.

    CVE-2022-22816:
    path_getbbox in path.c in Pillow before 9.0.0 has a buffer over-read during initialization of     ImagePath.Path.

    CVE-2020-35653:
    In Pillow before 8.1.0, PcxDecode has a buffer over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer calculations. A flaw was found in python-pillow. The     PcxDecode in Pillow has a buffer over-read when decoding a crafted PCX file due to the user-supplied     stride value trusted for buffer calculations. The highest threat from this vulnerability is to system     availability.

    CVE-2021-25287:
    An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_graya_la. There is an out-of-bounds read in J2kDecode in j2ku_graya_la. For J2k images with multiple     bands, its legal to have different widths for each band, e.g. 1 byte for L, 4 bytes for A.

    CVE-2021-25288:
    An issue was discovered in Pillow before 8.2.0. There is an out-of-bounds read in J2kDecode, in     j2ku_gray_i.There is an out-of-bounds read in J2kDecode in j2ku_gray_i. For J2k images with multiple     bands, its legal to have different widths for each band, e.g. 1 byte for L, 4 bytes for A.

    CVE-2021-25290:
    An issue was discovered in Pillow before 8.1.1. In TiffDecode.c, there is a negative-offset memcpy with an     invalid size. A flaw was found in python-pillow. In TiffDecode.c, there is a negative-offset memcpy with     an invalid size which could lead to a system crash.

    CVE-2021-25292:
    An issue was discovered in Pillow before 8.1.1. The PDF parser allows a regular expression DoS (ReDoS)     attack via a crafted PDF file because of a catastrophic backtracking regex. A flaw was found in python-     pillow. The PDF parser has a catastrophic backtracking regex that could be used as a DOS attack.

    CVE-2021-25293:
    An issue was discovered in Pillow before 8.1.1. There is an out-of-bounds read in SGIRleDecode.c. A flaw     was found in python-pillow. There is an Out of Bounds Read in SGIRleDecode.c.

    CVE-2021-27922:
    Pillow before 8.1.1 allows attackers to cause a denial of service (memory consumption) because the     reported size of a contained image is not properly checked for an ICNS container, and thus an attempted     memory allocation can be very large. A flaw was found in python-pillow. Attackers can cause a denial of     service (memory consumption) because the reported size of a contained image is not properly checked for an     ICNS container, and thus an attempted memory allocation can be very large.

    CVE-2021-28675:
    An issue was discovered in Pillow before 8.2.0. PSDImagePlugin.PsdImageFile lacked a sanity check on the     number of input layers relative to the size of the data block. This could lead to a DoS on Image.open     prior to Image.load. A flaw was found in python-pillow. PsdImagePlugin.PsdImageFile does not sanity check     the number of input layers with regard to the size of the data block which could lead to a denial-of-     service.

    CVE-2021-28677     An issue was discovered in Pillow before 8.2.0. For EPS data, the readline implementation used in     EPSImageFile has to deal with any combination of \r and \n as line endings. It used an accidentally     quadratic method of accumulating lines while looking for a line ending. A malicious EPS file could use     this to perform a DoS of Pillow in the open phase, before an image was accepted for opening. A flaw was     found in python-pillow. The readline used in EPS has to deal with any combination of \r and \n as line     endings. It accidentally used a quadratic method of accumulating lines while looking for a line ending. A     malicious EPS file could use this to perform a denial-of-service of Pillow in the open phase, before an     image was accepted for opening.

    CVE-2022-22817:
    PIL.ImageMath.eval in Pillow before 9.0.0 allows evaluation of arbitrary expressions, such as ones that     use the Python exec method.

Tenable has extracted the preceding description block directly from the Alibaba Cloud Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS Virtualization installation on the remote host is affected by the following vulnerabilities :

  - libImaging/FliDecode.c in Pillow before 6.2.2 has an     FLI buffer overflow.(CVE-2020-5313)

  - An out-of-bounds write flaw was discovered in     python-pillow in the way SGI RLE images are decoded. An     application that uses python-pillow to decode untrusted     images may be vulnerable to this flaw, which can allow     an attacker to crash the application or potentially     execute code on the system.(CVE-2020-5311)

  - libImaging/PcxDecode.c in Pillow before 6.2.2 has a PCX     P mode buffer overflow.(CVE-2020-5312)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

  - ** RESERVED ** This candidate has been reserved by an     organization or individual that will use it when     announcing a new security problem. When the candidate     has been publicized, the details for this candidate     will be provided.(CVE-2020-19911)

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - In Pillow before 8.1.0, PcxDecode has a buffer     over-read when decoding a crafted PCX file because the     user-supplied stride value is trusted for buffer     calculations.(CVE-2020-35653)

  - libImaging/FliDecode.c in Pillow before 6.2.2 has an     FLI buffer overflow.(CVE-2020-5313)

  - In libImaging/Jpeg2KDecode.c in Pillow before 7.1.0,     there are multiple out-of-bounds reads via a crafted     JP2 file.(CVE-2020-10994)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

  - libImaging/TiffDecode.c in Pillow before 6.2.2 has a     TIFF decoding integer overflow, related to     realloc.(CVE-2020-5310)

  - An out-of-bounds write flaw was discovered in     python-pillow in the way SGI RLE images are decoded. An     application that uses python-pillow to decode untrusted     images may be vulnerable to this flaw, which can allow     an attacker to crash the application or potentially     execute code on the system.(CVE-2020-5311)

  - libImaging/PcxDecode.c in Pillow before 6.2.2 has a PCX     P mode buffer overflow.(CVE-2020-5312)

  - In Pillow before 7.1.0, there are two Buffer Overflows     in libImaging/TiffDecode.c.(CVE-2020-10379)

  - An issue was discovered in Pillow before 6.2.0. When     reading specially crafted invalid image files, the     library can either allocate very large amounts of     memory or take an extremely long period of time to     process the image.(CVE-2019-16865)

  - In libImaging/PcxDecode.c in Pillow before 7.1.0, an     out-of-bounds read can occur when reading PCX files     where state->shuffle is instructed to read beyond     state->buffer.(CVE-2020-10378)

  - Pillow before 7.1.0 has multiple out-of-bounds reads in     libImaging/FliDecode.c.(CVE-2020-10177)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote CentOS Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the CESA-2020:0580 advisory.

  - python-pillow: reading specially crafted image files leads to allocation of large amounts of memory and     denial of service (CVE-2019-16865)

  - python-pillow: out-of-bounds write in expandrow in libImaging/SgiRleDecode.c (CVE-2020-5311)

  - python-pillow: improperly restricted operations on memory buffer in libImaging/PcxDecode.c (CVE-2020-5312)

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

According to the versions of the python-pillow package installed, the EulerOS Virtualization for ARM 64 installation on the remote host is affected by the following vulnerabilities :

  - libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an     SGI buffer overflow.(CVE-2020-5311)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

According to the versions of the python-pillow packages installed, the EulerOS installation on the remote host is affected by the following vulnerabilities :

  - There is a DoS vulnerability in Pillow before 6.2.2     caused by FpxImagePlugin.py calling the range function     on an unvalidated 32-bit integer if the number of bands     is large. On Windows running 32-bit Python, this     results in an OverflowError or MemoryError due to the 2     GB limit. However, on Linux running 64-bit Python this     results in the process being terminated by the OOM     killer.(CVE-2019-19911)

  - In libImaging/SgiRleDecode.c in Pillow through 7.0.0, a     number of out-of-bounds reads exist in the parsing of     SGI image files, a different issue than     CVE-2020-5311.(CVE-2020-11538)

  - libImaging/SgiRleDecode.c in Pillow before 6.2.2 has an     SGI buffer overflow.(CVE-2020-5311)

Note that Tenable Network Security has extracted the preceding description block directly from the EulerOS security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

The remote Oracle Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the ELSA-2020-0580 advisory.

    - Fix for CVE-2020-5311 - out-of-bounds write in expandrow     Resolves: rhbz#1789535

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the RHSA-2020:0580 advisory.

    The python-pillow packages contain a Python image processing library that provides extensive file format     support, an efficient internal representation, and powerful image-processing capabilities.

    Security Fix(es):

    * python-pillow: out-of-bounds write in expandrow in libImaging/SgiRleDecode.c (CVE-2020-5311)

    * python-pillow: improperly restricted operations on memory buffer in libImaging/PcxDecode.c     (CVE-2020-5312)

    * python-pillow: reading specially crafted image files leads to allocation of large amounts of memory and     denial of service (CVE-2019-16865)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 8 host has a package installed that is affected by multiple vulnerabilities as referenced in the RHSA-2020:0566 advisory.

    The python-pillow packages contain a Python image processing library that provides extensive file format     support, an efficient internal representation, and powerful image-processing capabilities.

    Security Fix(es):

    * python-pillow: out-of-bounds write in expandrow in libImaging/SgiRleDecode.c (CVE-2020-5311)

    * python-pillow: improperly restricted operations on memory buffer in libImaging/PcxDecode.c     (CVE-2020-5312)

    * python-pillow: reading specially crafted image files leads to allocation of large amounts of memory and     denial of service (CVE-2019-16865)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Backport patches for CVE-2020-5313, CVE-2020-5312, CVE-2020-5311, CVE-2020-5310, CVE-2019-19911

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.
Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Multiple security issues were discovered in Pillow, a Python imaging library, which could result in denial of service and potentially the execution of arbitrary code if malformed PCX, FLI, SGI or TIFF images are processed.

The remote Ubuntu 16.04 LTS / 18.04 LTS host has packages installed that are affected by multiple vulnerabilities as referenced in the USN-4272-1 advisory.

    It was discovered that Pillow incorrectly handled certain images. An attacker could possibly use this     issue to cause a denial of service. (CVE-2019-16865, CVE-2019-19911)

    It was discovered that Pillow incorrectly handled certain images. An attacker could possibly use this     issue to execute arbitrary code. (CVE-2020-5312)

    It was discovered that Pillow incorrectly handled certain TIFF images. An attacker could possibly use this     issue to cause a crash. This issue only affected Ubuntu 19.10. (CVE-2020-5310)

    It was discovered that Pillow incorrectly handled certain SGI images. An attacker could possibly use this     issue to execute arbitrary code or cause a crash. This issue only affected Ubuntu 18.04 and Ubuntu 19.10.
    (CVE-2020-5311)

    It was discovered that Pillow incorrectly handled certain PCX images. An attackter could possibly use this     issue to execute arbitrary code or cause a crash. (CVE-2020-5312)

    It was discovered that Pillow incorrectly handled certain Flip images. An attacker could possibly use this     issue to execute arbitrary code or cause a crash. (CVE-2020-5313)

Tenable has extracted the preceding description block directly from the Ubuntu security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Update to 6.2.2, fixes CVE-2020-5313, CVE-2020-5312, CVE-2020-5311, CVE-2020-5310.

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora update system website.
Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

Pillow developers report :

This release addresses several security problems, as well as addressing CVE-2019-19911.

CVE-2019-19911 is regarding FPX images. If an image reports that it has a large number of bands, a large amount of resources will be used when trying to process the image. This is fixed by limiting the number of bands to those usable by Pillow.

Buffer overruns were found when processing an SGI, PCX or FLI image.
Checks have been added to prevent this.

Overflow checks have been added when calculating the size of a memory block to be reallocated in the processing of a TIFF image.

ID	Name	Product	Family	Severity
236661	Alibaba Cloud Linux 3 : 0012: python-pillow (ALINUX3-SA-2022:0012)	Nessus	Alibaba Cloud Linux Local Security Checks	critical
148586	EulerOS Virtualization 2.9.0 : python-pillow (EulerOS-SA-2021-1743)	Nessus	Huawei Local Security Checks	critical
148585	EulerOS Virtualization 2.9.1 : python-pillow (EulerOS-SA-2021-1729)	Nessus	Huawei Local Security Checks	critical
146238	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-1273)	Nessus	Huawei Local Security Checks	critical
146225	EulerOS 2.0 SP9 : python-pillow (EulerOS-SA-2021-1254)	Nessus	Huawei Local Security Checks	critical
146010	CentOS 8 : python-pillow (CESA-2020:0580)	Nessus	CentOS Local Security Checks	critical
140972	EulerOS Virtualization for ARM 64 3.0.6.0 : python-pillow (EulerOS-SA-2020-2024)	Nessus	Huawei Local Security Checks	critical
139980	EulerOS 2.0 SP8 : python-pillow (EulerOS-SA-2020-1877)	Nessus	Huawei Local Security Checks	critical
134059	Oracle Linux 8 : python-pillow (ELSA-2020-0580)	Nessus	Oracle Linux Local Security Checks	critical
134034	RHEL 8 : python-pillow (RHSA-2020:0580)	Nessus	Red Hat Local Security Checks	critical
133944	RHEL 8 : python-pillow (RHSA-2020:0566)	Nessus	Red Hat Local Security Checks	critical
133887	Fedora 30 : python-pillow (2020-5cdbb19cca)	Nessus	Fedora Local Security Checks	critical
133879	Debian DSA-4631-1 : pillow - security update	Nessus	Debian Local Security Checks	critical
133550	Ubuntu 16.04 LTS / 18.04 LTS : Pillow vulnerabilities (USN-4272-1)	Nessus	Ubuntu Local Security Checks	critical
133376	Fedora 31 : python-pillow (2020-df444e464e)	Nessus	Fedora Local Security Checks	critical
133243	FreeBSD : Pillow -- Multiple vulnerabilities (0700e76c-3eb0-11ea-8478-3085a9a95629)	Nessus	FreeBSD Local Security Checks	critical

Detections

Analytics

CVE-2020-5311

critical

Tenable Plugins

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical

critical