The remoteDispatchStoragePoolListAllVolumes function in the storage pool manager in libvirt 1.0.5 allows remote attackers to cause a denial of service (file descriptor consumption) via a large number of requests "to list all volumes for the particular pool."

The remote MiracleLinux 4 host has packages installed that are affected by a vulnerability as referenced in the AXSA:2013-450:06 advisory.

    Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and     other OSes). The main package includes the libvirtd server exporting the virtualization support.
    Security issues fixed with this release:
    CVE-2013-1962     No information available at the time of writing, please refer to the CVE link below.
    Fixed bugs:
     Previously, libvirt made cgroup requests on some files that should have not received such requests and     the newer kernels would log warnings and failure messages to the libvirtd and audit logs. This has been     fixed.
     Previously, because libvirt used the wrong variable when constructing audit messages, ausearch formatted     tcertain entries as having path=(null) instead of the correct path. This has been fixed.
     Previously IPv6 was not handled properly during migration. This has been fixed.
     Previously, a race condition in the libvirt client library could make applications using libvirt crash     with a segmentation fault. This was due to one thread trying to free the connection to an object when     another thread executed the connection close callback. This has been fixed.
     Fixed the client crashing when the server drops connection.
     Previously, using the virsh vol-create-from command to clone a storage volume not in RAW format from a     directory, systemor NFS pool failed with an unknown file format error message. This has been fixed.
     Previously, guests set to be automatically destroyed when a connection was closed failed to be destroyed     and the libvirtd daemon would crash. This has been fixed.
     Previously, on machines under heavy load, the libvirt test suite, run during RPM build, sometimes ended     up in a deadlock and the build never finished. This has been fixed.

Tenable has extracted the preceding description block directly from the MiracleLinux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

This update of libvirt fixes two problems :

  - fix leak after listing all volumes - CVE-2013-1962     ca697e90-CVE-2013-1962.patch bnc#820397

  - Fix parsing of bond interface XML     5ba077dc-iface-bond.patch bnc#810893

The remote host is affected by the vulnerability described in GLSA-201309-18 (libvirt: Multiple vulnerabilities)

    An error in the virNetMessageFree() function in rpc/virnetserverclient.c       can lead to a use-after-free. Additionally, a socket leak in the       remoteDispatchStoragePoolListAllVolumes command can lead to file       descriptor exhaustion.
  Impact :

    A remote attacker could cause certain errors during an RPC connection to       cause a message to be freed without being removed from the message queue,       possibly resulting in execution of arbitrary code or a Denial of Service       condition. Additionally, a remote attacker could repeatedly issue the       command to list all pool volumes, causing a Denial of Service condition.
  Workaround :

    There is no known workaround at this time.

The remote Oracle Linux 6 host has packages installed that are affected by a vulnerability as referenced in the ELSA-2013-0831 advisory.

    - daemon: Fix leak after listing volumes (CVE-2013-1962)

Tenable has extracted the preceding description block directly from the Oracle Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

It was discovered that libvirt incorrectly handled certain storage pool requests. A remote attacker could use this issue to cause libvirt to consume resources, resulting in a denial of service.

Note that Tenable Network Security has extracted the preceding description block directly from the Ubuntu security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

- Rebased to version 0.10.2.5

    - Fix creating snapshot on lvm pool (bz #955371)

    - Properly escape audit paths (bz #922186)

    - Follow updated packaging guidelines for user alloc (bz       #924501)

    - CVE-2013-1962 Open files DoS (bz #963789, bz #953107)

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

- Rebased to version 1.0.5.1

    - Follow updated packaging guidelines for user alloc (bz       #924501)

    - CVE-2013-1962 Open files DoS (bz #963789, bz #953107)

    - Fix stream operations like screenshot (bz #960879)

Note that Tenable Network Security has extracted the preceding description block directly from the Fedora security advisory. Tenable has attempted to automatically clean and format it as much as possible without introducing additional issues.

It was found that libvirtd leaked file descriptors when listing all volumes for a particular pool. A remote attacker able to establish a read- only connection to libvirtd could use this flaw to cause libvirtd to consume all available file descriptors, preventing other users from using libvirtd services (such as starting a new guest) until libvirtd is restarted. (CVE-2013-1962)

This update also fixes the following bugs :

  - Previously, libvirt made control group (cgroup) requests     on files that it should not have. With older kernels,     such nonsensical cgroup requests were ignored; however,     newer kernels are stricter, resulting in libvirt logging     spurious warnings and failures to the libvirtd and audit     logs. The audit log failures displayed by the ausearch     tool were similar to the following :

root [date] - failed cgroup allow path rw /dev/kqemu

With this update, libvirt no longer attempts the nonsensical cgroup actions, leaving only valid attempts in the libvirtd and audit logs (making it easier to search for real cases of failure).

  - Previously, libvirt used the wrong variable when     constructing audit messages. This led to invalid audit     messages, causing ausearch to format certain entries as     having 'path=(null)' instead of the correct path. This     could prevent ausearch from locating events related to     cgroup device ACL modifications for guests managed by     libvirt. With this update, the audit messages are     generated correctly, preventing loss of audit coverage.

After installing the updated packages, libvirtd will be restarted automatically.

Updated libvirt packages that fix one security issue and two bugs are now available for Red Hat Enterprise Linux 6.

The Red Hat Security Response Team has rated this update as having moderate security impact. A Common Vulnerability Scoring System (CVSS) base score, which gives a detailed severity rating, is available from the CVE link in the References section.

The libvirt library is a C API for managing and interacting with the virtualization capabilities of Linux and other operating systems. In addition, libvirt provides tools for remote management of virtualized systems.

It was found that libvirtd leaked file descriptors when listing all volumes for a particular pool. A remote attacker able to establish a read-only connection to libvirtd could use this flaw to cause libvirtd to consume all available file descriptors, preventing other users from using libvirtd services (such as starting a new guest) until libvirtd is restarted. (CVE-2013-1962)

Red Hat would like to thank Edoardo Comar of IBM for reporting this issue.

This update also fixes the following bugs :

* Previously, libvirt made control group (cgroup) requests on files that it should not have. With older kernels, such nonsensical cgroup requests were ignored; however, newer kernels are stricter, resulting in libvirt logging spurious warnings and failures to the libvirtd and audit logs. The audit log failures displayed by the ausearch tool were similar to the following :

root [date] - failed cgroup allow path rw /dev/kqemu

With this update, libvirt no longer attempts the nonsensical cgroup actions, leaving only valid attempts in the libvirtd and audit logs (making it easier to search for real cases of failure). (BZ#958837)

* Previously, libvirt used the wrong variable when constructing audit messages. This led to invalid audit messages, causing ausearch to format certain entries as having 'path=(null)' instead of the correct path. This could prevent ausearch from locating events related to cgroup device ACL modifications for guests managed by libvirt. With this update, the audit messages are generated correctly, preventing loss of audit coverage. (BZ#958839)

All users of libvirt are advised to upgrade to these updated packages, which contain backported patches to correct these issues. After installing the updated packages, libvirtd will be restarted automatically.

ID	Name	Product	Family	Severity
289739	MiracleLinux 4 : libvirt-0.10.2-18.5.0.1.AXS4 (AXSA:2013-450:06)	Nessus	Miracle Linux Local Security Checks	high
75021	openSUSE Security Update : libvirt (openSUSE-SU-2013:0885-1)	Nessus	SuSE Local Security Checks	medium
70130	GLSA-201309-18 : libvirt: Multiple vulnerabilities	Nessus	Gentoo Local Security Checks	high
68824	Oracle Linux 6 : libvirt (ELSA-2013-0831)	Nessus	Oracle Linux Local Security Checks	high
67139	Ubuntu 13.04 : libvirt vulnerability (USN-1895-1)	Nessus	Ubuntu Local Security Checks	medium
66648	Fedora 18 : libvirt-0.10.2.5-1.fc18 (2013-8681)	Nessus	Fedora Local Security Checks	medium
66619	Fedora 19 : libvirt-1.0.5.1-1.fc19 (2013-8635)	Nessus	Fedora Local Security Checks	medium
66491	Scientific Linux Security Update : libvirt on SL6.x i386/x86_64 (20130516)	Nessus	Scientific Linux Local Security Checks	medium
66489	RHEL 6 : libvirt (RHSA-2013:0831)	Nessus	Red Hat Local Security Checks	medium
66485	CentOS 6 : libvirt (CESA-2013:0831)	Nessus	CentOS Local Security Checks	medium

Detections

Analytics

CVE-2013-1962

high

Tenable Plugins

high

medium

high

high

medium

medium

medium

medium

medium

medium