The Rocky Linux 9.6 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.6:CLSA-2026:1792762308 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Synchronous access b/w     reset and tm thread for reply queue When the task management thread processes reply queues while the reset     thread resets them, the task management thread accesses an invalid queue ID (0xFFFF), set by the reset     thread, which points to unallocated memory, causing a crash. Add flag 'io_admin_reset_sync' to synchronize     access between the reset, I/O, and admin threads. Before a reset, the reset handler sets this flag to     block I/O and admin processing threads. If any thread bypasses the initial check, the reset thread waits     up to 10 seconds for processing to finish. If the wait exceeds 10 seconds, the controller is marked as     unrecoverable. (CVE-2025-37861)

  - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send     timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if     the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT     timers. Should fix the BUG: sporadically seen by BlueZ test bot (in Mesh - Send cancel - 1 test). Log:
    ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36:
    kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60
    __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0     vhci_release+0x18b/0x240 ------ (CVE-2025-40284)

  - In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-     elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream     while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two     operations shall be synchronized to avoid slab-use-after-free or worse errors. (CVE-2025-40344)

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: icmp: clear skb2->cb[] in     ip6_err_gen_icmpv6_unreach() Sashiko AI-review observed: In ip6_err_gen_icmpv6_unreach(), the skb is an     outer IPv4 ICMP error packet where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2 and     passed to icmp6_send(), it uses IP6CB(skb2). IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm.
    The cipso offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm at offset 18. If an     attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao would be a non-zero offset. Inside     icmp6_send(), mip6_addr_swap() is called and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO). This     would scan the inner, attacker-controlled IPv6 packet starting at that offset, potentially returning a     fake TLV without checking if the remaining packet length can hold the full 18-byte struct     ipv6_destopt_hao. Could mip6_addr_swap() then perform a 16-byte swap that extends past the end of the     packet data into skb_shared_info? Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and     ip6ip6_err() to prevent this? This patch implements the first suggestion. I am not sure if ip6ip6_err()     needs to be changed. A separate patch would be better anyway. (CVE-2026-43038)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix double free in     rxe_srq_from_init In rxe_srq_from_init(), the queue pointer 'q' is assigned to 'srq->rq.queue' before     copying the SRQ number to user space. If copy_to_user() fails, the function calls rxe_queue_cleanup() to     free the queue, but leaves the now-invalid pointer in 'srq->rq.queue'. The caller of rxe_srq_from_init()     (rxe_create_srq) eventually calls rxe_srq_cleanup() upon receiving the error, which triggers a second     rxe_queue_cleanup() on the same memory, leading to a double free. The call trace looks like this:
    kmem_cache_free+0x.../0x... rxe_queue_cleanup+0x1a/0x30 [rdma_rxe] rxe_srq_cleanup+0x42/0x60 [rdma_rxe]     rxe_elem_release+0x31/0x70 [rdma_rxe] rxe_create_srq+0x12b/0x1a0 [rdma_rxe] ib_create_srq_user+0x9a/0x150     [ib_core] Fix this by moving 'srq->rq.queue = q' after copy_to_user. (CVE-2026-45852)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The AlmaLinux 9.2 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare ALMALINUX9.2:CLSA-2026:1792751700 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in     l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we     can follow what udpv6 does and subtract the transhdrlen from the max. (CVE-2022-49727)

  - In the Linux kernel, the following vulnerability has been resolved: bpf: Fix accesses to uninit stack     slots Privileged programs are supposed to be able to read uninitialized stack memory (ever since     6715df8d5) but, before this patch, these accesses were permitted inconsistently. In particular, accesses     were permitted above state->allocated_stack, but not below it. In other words, if the stack was already     large enough, the access was permitted, but otherwise the access was rejected instead of being allowed     to grow the stack. This undesired rejection was happening in two places: - in     check_stack_slot_within_bounds() - in check_stack_range_initialized() This patch arranges for these     accesses to be permitted. A bunch of tests that were relying on the old rejection had to change; all of     them were changed to add also run unprivileged, in which case the old behavior persists. One tests     couldn't be updated - global_func16 - because it can't run unprivileged for other reasons. This patch also     fixes the tracking of the stack size for variable-offset reads. This second fix is bundled in the same     commit as the first one because they're inter-related. Before this patch, writes to the stack using     registers containing a variable offset (as opposed to registers with fixed, known values) were not     properly contributing to the function's needed stack size. As a result, it was possible for a program to     verify, but then to attempt to read out-of-bounds data at runtime because a too small stack had been     allocated for it. Each function tracks the size of the stack it needs in bpf_subprog_info.stack_depth,     which is maintained by update_stack_depth(). For regular memory accesses, check_mem_access() was calling     update_state_depth() but it was passing in only the fixed part of the offset register, ignoring the     variable offset. This was incorrect; the minimum possible value of that register should be used instead.
    This tracking is now fixed by centralizing the tracking of stack size in grow_stack_state(), and by     lifting the calls to grow_stack_state() to check_stack_access_within_bounds() as suggested by Andrii. The     code is now simpler and more convincingly tracks the correct maximum stack size.
    check_stack_range_initialized() can now rely on enough stack having been allocated for the access; this     helps with the fix for the first issue. A few tests were changed to also check the stack depth     computation. The one that fails without this patch is verifier_var_off:stack_write_priv_vs_unpriv.
    (CVE-2023-52452)

  - In the Linux kernel, the following vulnerability has been resolved: qed/qed_sriov: guard against NULL     derefs from qed_iov_get_vf_info We have to make sure that the info returned by the helper is valid before     using it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool.
    (CVE-2023-53066)

  - In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix a server shutdown leak Fix     a race where kthread_stop() may prevent the threadfn from ever getting called. If that happens the     svc_rqst will not be cleaned up. (CVE-2023-53131)

  - In the Linux kernel, the following vulnerability has been resolved: pstore/ram: Add check for kstrdup Add     check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer     dereference. (CVE-2023-54189)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS-STREAM8:CLSA-2026:1792759740 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

  - In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before     using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any     validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a     user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to     user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an     out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to     userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory     allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which     properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same     validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).
    (CVE-2026-45856)

  - In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in     qd_put Commit a475c5dd16e5 (gfs2: Free quota data objects synchronously) started freeing quota data     objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove     these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker     (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd     objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey     <kartikey406@gmail.com>. (CVE-2026-45861)

  - In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix use-after-free in iomap     inline data write path The inline data buffer head (dibh) is being released prematurely in     gfs2_iomap_begin() via release_metapath() while iomap->inline_data still points to dibh->b_data. This     causes a use-after-free when iomap_write_end_inline() later attempts to write to the inline data area. The     bug sequence: 1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode metadata into dibh 2.
    Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode) 3. Calls release_metapath() which     calls brelse(dibh), dropping refcount to 0 4. kswapd reclaims the page (~39ms later in the syzbot report)     5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data 6. KASAN detects use-after-free write     to freed memory Fix by storing dibh in iomap->private and incrementing its refcount with get_bh() in     gfs2_iomap_begin(). The buffer is then properly released in gfs2_iomap_end() after the inline write     completes, ensuring the page stays alive for the entire iomap operation. Note: A C reproducer is not     available for this issue. The fix is based on analysis of the KASAN report and code review showing the     buffer head is freed before use. [agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid     leaks in gfs2_iomap_get() and gfs2_iomap_alloc().] (CVE-2026-45984)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 8.4 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.4:CLSA-2026:1792979607 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up     for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free     detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct     ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one     HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set     muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in     ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k,     and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean     up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [     306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0     peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt     peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0     peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer     b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from     b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac     vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci     0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0:
    htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap     vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from     d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0:
    failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta     peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed     [21713.799968] ================================================================== [21713.799991] BUG:
    KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997]     Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a     [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059]
    __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211]     [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110]     ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211]     [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be     [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176]     netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187]     sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1     [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210]     entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69:
    0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated     by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core]     [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265]     ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277]     ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283]     ath10k_pci_process_rx_cb+0x195/0x1d ---truncated--- (CVE-2022-50880)

  - In the Linux kernel, the following vulnerability has been resolved: ubi: Fix use-after-free when volume     resizing failed There is an use-after-free problem reported by KASAN:
    ================================================================== BUG: KASAN: use-after-free in     ubi_eba_copy_table+0x11f/0x1c0 [ubi] Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735 CPU: 2     PID: 4735 Comm: ubirsvol Not tainted 6.1.0-rc1-00003-g84fa3304a7fc-dirty #14 Hardware name: QEMU Standard     PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44     print_report+0x171/0x472 kasan_report+0xad/0x130 ubi_eba_copy_table+0x11f/0x1c0 [ubi]     ubi_resize_volume+0x4f9/0xbc0 [ubi] ubi_cdev_ioctl+0x701/0x1850 [ubi] __x64_sys_ioctl+0x11d/0x170     do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> When ubi_change_vtbl_record()     returns an error in ubi_resize_volume(), new_eba_tbl will be freed on error handing path, but it is     holded by vol->eba_tbl in ubi_eba_replace_table(). It means that the liftcycle of vol->eba_tbl and     vol are different, so when resizing volume in next time, it causing an use-after-free fault. Fix it by     not freeing new_eba_tbl after it replaced in ubi_eba_replace_table(), while will be freed in next volume     resizing. (CVE-2023-53800)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: essiv - Handle EBUSY correctly     As it is essiv only handles the special return value of EINPROGERSS, which means that in all other cases     it will free data related to the request. However, as the caller of essiv may specify MAY_BACKLOG, we also     need to expect EBUSY and treat it in the same way. Otherwise backlogged requests will trigger a use-after-     free. (CVE-2023-54046)

  - In the Linux kernel, the following vulnerability has been resolved: net: avoid potential underflow in     qdisc_pkt_len_init() with UFO After commit 7c6d2ecbda83 (net: be more gentle about silly gso requests     coming from user) virtio_net_hdr_to_skb() had sanity check to detect malicious attempts from user space     to cook a bad GSO packet. Then commit cf9acc90c80ec (net: virtio_net_hdr_to_skb: count transport header     in UFO) while fixing one issue, allowed user space to cook a GSO packet with the following characteristic     : IPv4 SKB_GSO_UDP, gso_size=3, skb->len = 28. When this packet arrives in qdisc_pkt_len_init(), we end up     with hdr_len = 28 (IPv4 header + UDP header), matching skb->len Then the following sets gso_segs to 0 :
    gso_segs = DIV_ROUND_UP(skb->len - hdr_len, shinfo->gso_size); Then later we set     qdisc_skb_cb(skb)->pkt_len to back to zero :/ qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len; This     leads to the following crash in fq_codel [1] qdisc_pkt_len_init() is best effort, we only want an     estimation of the bytes sent on the wire, not crashing the kernel. This patch is fixing this particular     issue, a following one adds more sanity checks for another potential bug. [1] [ 70.724101] BUG: kernel     NULL pointer dereference, address: 0000000000000000 [ 70.724561] #PF: supervisor read access in kernel     mode [ 70.724561] #PF: error_code(0x0000) - not-present page [ 70.724561] PGD 10ac61067 P4D 10ac61067 PUD     107ee2067 PMD 0 [ 70.724561] Oops: Oops: 0000 [#1] SMP NOPTI [ 70.724561] CPU: 11 UID: 0 PID: 2163 Comm:
    b358537762 Not tainted 6.11.0-virtme #991 [ 70.724561] Hardware name: QEMU Standard PC (i440FX + PIIX,     1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 70.724561] RIP: 0010:fq_codel_enqueue     (net/sched/sch_fq_codel.c:120 net/sched/sch_fq_codel.c:168 net/sched/sch_fq_codel.c:230) sch_fq_codel [     70.724561] Code: 24 08 49 c1 e1 06 44 89 7c 24 18 45 31 ed 45 31 c0 31 ff 89 44 24 14 4c 03 8b 90 01 00 00     eb 04 39 ca 73 37 4d 8b 39 83 c7 01 <49> 8b 17 49 89 11 41 8b 57 28 45 8b 5f 34 49 c7 07 00 00 00 00 49     All code ======== 0: 24 08 and $0x8,%al 2: 49 c1 e1 06 shl $0x6,%r9 6: 44 89 7c 24 18 mov %r15d,0x18(%rsp)     b: 45 31 ed xor %r13d,%r13d e: 45 31 c0 xor %r8d,%r8d 11: 31 ff xor %edi,%edi 13: 89 44 24 14 mov     %eax,0x14(%rsp) 17: 4c 03 8b 90 01 00 00 add 0x190(%rbx),%r9 1e: eb 04 jmp 0x24 20: 39 ca cmp %ecx,%edx     22: 73 37 jae 0x5b 24: 4d 8b 39 mov (%r9),%r15 27: 83 c7 01 add $0x1,%edi 2a:* 49 8b 17 mov (%r15),%rdx     <-- trapping instruction 2d: 49 89 11 mov %rdx,(%r9) 30: 41 8b 57 28 mov 0x28(%r15),%edx 34: 45 8b 5f 34     mov 0x34(%r15),%r11d 38: 49 c7 07 00 00 00 00 movq $0x0,(%r15) 3f: 49 rex.WB Code starting with the     faulting instruction =========================================== 0: 49 8b 17 mov (%r15),%rdx 3: 49 89 11     mov %rdx,(%r9) 6: 41 8b 57 28 mov 0x28(%r15),%edx a: 45 8b 5f 34 mov 0x34(%r15),%r11d e: 49 c7 07 00 00 00     00 movq $0x0,(%r15) 15: 49 rex.WB [ 70.724561] RSP: 0018:ffff95ae85e6fb90 EFLAGS: 00000202 [ 70.724561]     RAX: 0000000002000000 RBX: ffff95ae841de000 RCX: 0000000000000000 [ 70.724561] RDX: 0000000000000000 RSI:
    0000000000000001 RDI: 0000000000000001 [ 70.724561] RBP: ffff95ae85e6fbf8 R08: 0000000000000000 R09:
    ffff95b710a30000 [ 70.724561] R10: 0000000000000000 R11: bdf289445ce31881 R12: ffff95ae85e6fc58 [     70.724561] R13: 0000000000000000 R14: 0000000000000040 R15: 0000000000000000 [ 70.724561] FS:
    000000002c5c1380(0000) GS:ffff95bd7fcc0000(0000) knlGS:0000000000000000 [ 70.724561] CS: 0010 DS: 0000 ES:
    0000 C ---truncated--- (CVE-2024-49949)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The CentOS Linux 7 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS7:CLSA-2026:1793321383 advisory.

  - In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix premature hw access     after PCI error After a recoverable PCI error has been detected and recovered, qla driver needs to check     to see if the error condition still persist and/or wait for the OS to give the resume signal. Sep 8     22:26:03 localhost kernel: WARNING: CPU: 9 PID: 124606 at qla_tmpl.c:440 qla27xx_fwdt_entry_t266+0x55/0x60     [qla2xxx] Sep 8 22:26:03 localhost kernel: RIP: 0010:qla27xx_fwdt_entry_t266+0x55/0x60 [qla2xxx] Sep 8     22:26:03 localhost kernel: Call Trace: Sep 8 22:26:03 localhost kernel: ? qla27xx_walk_template+0xb1/0x1b0     [qla2xxx] Sep 8 22:26:03 localhost kernel: ? qla27xx_execute_fwdt_template+0x12a/0x160 [qla2xxx] Sep 8     22:26:03 localhost kernel: ? qla27xx_fwdump+0xa0/0x1c0 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     qla2xxx_pci_mmio_enabled+0xfb/0x120 [qla2xxx] Sep 8 22:26:03 localhost kernel: ?     report_mmio_enabled+0x44/0x80 Sep 8 22:26:03 localhost kernel: ? report_slot_reset+0x80/0x80 Sep 8     22:26:03 localhost kernel: ? pci_walk_bus+0x70/0x90 Sep 8 22:26:03 localhost kernel: ?     aer_dev_correctable_show+0xc0/0xc0 Sep 8 22:26:03 localhost kernel: ? pcie_do_recovery+0x1bb/0x240 Sep 8     22:26:03 localhost kernel: ? aer_recover_work_func+0xaa/0xd0 Sep 8 22:26:03 localhost kernel: ?     process_one_work+0x1a7/0x360 .. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-8041:22: detected     PCI disconnect. Sep 8 22:26:03 localhost kernel: qla2xxx [0000:42:00.2]-107ff:22: qla27xx_fwdt_entry_t262:
    dump ram MB failed. Area 5h start 198013h end 198013h Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-107ff:22: Unable to capture FW dump Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-1015:22: cmd=0x0, waited 5221 msecs Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-680d:22: mmio enabled returning. Sep 8 22:26:03 localhost kernel: qla2xxx     [0000:42:00.2]-d04c:22: MBX Command timeout for cmd 0, iocontrol=ffffffff jiffies=10140f2e5     mb[0-3]=[0xffff 0xffff 0xffff 0xffff] (CVE-2022-49157)

  - In the Linux kernel, the following vulnerability has been resolved: mrp: introduce active flags to prevent     UAF when applicant uninit The caller of del_timer_sync must prevent restarting of the timer, If we have no     this synchronization, there is a small probability that the cancellation will not be successful. And     syzbot report the fellowing crash: ================================================================== BUG:
    KASAN: use-after-free in hlist_add_head include/linux/list.h:929 [inline] BUG: KASAN: use-after-free in     enqueue_timer+0x18/0xa4 kernel/time/timer.c:605 Write at addr f9ff000024df6058 by task syz-fuzzer/2256     Pointer tag: [f9], memory tag: [fe] CPU: 1 PID: 2256 Comm: syz-fuzzer Not tainted     6.1.0-rc5-syzkaller-00008- ge01d50cbd6ee #0 Hardware name: linux,dummy-virt (DT) Call trace:
    dump_backtrace.part.0+0xe0/0xf0 arch/arm64/kernel/stacktrace.c:156 dump_backtrace     arch/arm64/kernel/stacktrace.c:162 [inline] show_stack+0x18/0x40 arch/arm64/kernel/stacktrace.c:163
    __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x68/0x84 lib/dump_stack.c:106     print_address_description mm/kasan/report.c:284 [inline] print_report+0x1a8/0x4a0 mm/kasan/report.c:395     kasan_report+0x94/0xb4 mm/kasan/report.c:495 __do_kernel_fault+0x164/0x1e0 arch/arm64/mm/fault.c:320     do_bad_area arch/arm64/mm/fault.c:473 [inline] do_tag_check_fault+0x78/0x8c arch/arm64/mm/fault.c:749     do_mem_abort+0x44/0x94 arch/arm64/mm/fault.c:825 el1_abort+0x40/0x60 arch/arm64/kernel/entry-common.c:367     el1h_64_sync_handler+0xd8/0xe4 arch/arm64/kernel/entry-common.c:427 el1h_64_sync+0x64/0x68     arch/arm64/kernel/entry.S:576 hlist_add_head include/linux/list.h:929 [inline] enqueue_timer+0x18/0xa4     kernel/time/timer.c:605 mod_timer+0x14/0x20 kernel/time/timer.c:1161 mrp_periodic_timer_arm     net/802/mrp.c:614 [inline] mrp_periodic_timer+0xa0/0xc0 net/802/mrp.c:627     call_timer_fn.constprop.0+0x24/0x80 kernel/time/timer.c:1474 expire_timers+0x98/0xc4     kernel/time/timer.c:1519 To fix it, we can introduce a new active flags to make sure the timer will not     restart. (CVE-2022-50697)

  - In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix DMA transfer     direction When CONFIG_DMA_API_DEBUG is selected, while running the crypto self test on the QAT crypto     algorithms, the function add_dma_entry() reports a warning similar to the one below, saying that     overlapping mappings are not supported. This occurs in tests where the input and the output scatter list     point to the same buffers (i.e. two different scatter lists which point to the same chunks of memory). The     logic that implements the mapping uses the flag DMA_BIDIRECTIONAL for both the input and the output     scatter lists which leads to overlapped write mappings. These are not supported by the DMA layer. Fix by     specifying the correct DMA transfer directions when mapping buffers. For in-place operations where the     input scatter list matches the output scatter list, buffers are mapped once with DMA_BIDIRECTIONAL,     otherwise input buffers are mapped using the flag DMA_TO_DEVICE and output buffers are mapped with     DMA_FROM_DEVICE. Overlapping a read mapping with a write mapping is a valid case in dma-coherent devices     like QAT. The function that frees and unmaps the buffers, qat_alg_free_bufl() has been changed accordingly     to the changes to the mapping function. DMA-API: 4xxx 0000:06:00.0: cacheline tracking EEXIST, overlapping     mappings aren't supported WARNING: CPU: 53 PID: 4362 at kernel/dma/debug.c:570 add_dma_entry+0x1e9/0x270     ... Call Trace: dma_map_page_attrs+0x82/0x2d0 ? preempt_count_add+0x6a/0xa0     qat_alg_sgl_to_bufl+0x45b/0x990 [intel_qat] qat_alg_aead_dec+0x71/0x250 [intel_qat]     crypto_aead_decrypt+0x3d/0x70 test_aead_vec_cfg+0x649/0x810 ? number+0x310/0x3a0 ? vsnprintf+0x2a3/0x550 ?     scnprintf+0x42/0x70 ? valid_sg_divisions.constprop.0+0x86/0xa0 ? test_aead_vec+0xdf/0x120     test_aead_vec+0xdf/0x120 alg_test_aead+0x185/0x400 alg_test+0x3d8/0x500 ?     crypto_acomp_scomp_free_ctx+0x30/0x30 ? __schedule+0x32a/0x12a0 ? ttwu_queue_wakelist+0xbf/0x110 ?
    _raw_spin_unlock_irqrestore+0x23/0x40 ? try_to_wake_up+0x83/0x570 ? _raw_spin_unlock_irqrestore+0x23/0x40     ? __set_cpus_allowed_ptr_locked+0xea/0x1b0 ? crypto_acomp_scomp_free_ctx+0x30/0x30     cryptomgr_test+0x27/0x50 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30     (CVE-2022-50774)

  - In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK     in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware     (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid     the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all     chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to     the device. (CVE-2023-53715)

  - In the Linux kernel, the following vulnerability has been resolved: posix-timers: Ensure timer ID search-     loop limit is valid posix_timer_add() tries to allocate a posix timer ID by starting from the cached ID     which was stored by the last successful allocation. This is done in a loop searching the ID space for a     free slot one by one. The loop has to terminate when the search wrapped around to the starting point. But     that's racy vs. establishing the starting point. That is read out lockless, which leads to the following     problem: CPU0 CPU1 posix_timer_add() start = sig->posix_timer_id; lock(hash_lock); ... posix_timer_add()     if (++sig->posix_timer_id < 0) start = sig->posix_timer_id; sig->posix_timer_id = 0; So CPU1 can observe a     negative start value, i.e. -1, and the loop break never happens because the condition can never be true:
    if (sig->posix_timer_id == start) break; While this is unlikely to ever turn into an endless loop as the     ID space is huge (INT_MAX), the racy read of the start value caught the attention of KCSAN and Dmitry     unearthed that incorrectness. Rewrite it so that all id operations are under the hash lock.
    (CVE-2023-53728)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Published	Updated	Severity
371428	Rocky Linux 9.6 [TuxCare] Security Update: kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.6:CLSA-2026:1792762308)	Nessus	Rocky Linux Local Security Checks	10/23/2026	10/23/2026	high
371223	AlmaLinux 9.2 [TuxCare] Security Update: bpftool / kernel / kernel-64k / kernel-64k-core / kernel-64k-debug / etc Multiple Vulnerabilities (ALMALINUX9.2:CLSA-2026:1792751700)	Nessus	Alma Linux Local Security Checks	10/23/2026	10/23/2026	high
371420	CentOS Linux 8 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS-STREAM8:CLSA-2026:1792759740)	Nessus	CentOS Local Security Checks	10/23/2026	10/27/2026	high
372044	CentOS Linux 8.4 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.4:CLSA-2026:1792979607)	Nessus	CentOS Local Security Checks	10/26/2026	11/2/2026	high
375672	CentOS Linux 7 [TuxCare] Security Update: bpftool / kernel / kernel-debug / kernel-debug-devel / kernel-devel / etc Multiple Vulnerabilities (CENTOS7:CLSA-2026:1793321383)	Nessus	CentOS Local Security Checks	11/3/2026	11/3/2026	high

Detections

Analytics

Plugins Search

high

high

high

high

high