Unity Linux 20.1070e Security Update: kernel (UTSA-2026-167077)

medium Nessus Plugin ID 383131

Synopsis

The Unity Linux host is missing one or more security updates.

Description

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-167077 advisory.

In the Linux kernel, the following vulnerability has been resolved:

ibmvnic: fix race between xmit and reset

There is a race between reset and the transmit paths that can lead to ibmvnic_xmit() accessing an scrq after it has been freed in the reset path. It can result in a crash like:

Kernel attempted to read user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc0080000016189f8 Oops: Kernel access of bad area, sig: 11 [#1] ...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic] LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable) [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c9cfcc] sch_direct_xmit+0xec/0x330 [c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0 [c000000000c00ad4] __dev_queue_xmit+0x394/0x730 [c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding] [c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding] [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280 [c000000000c00ca4] __dev_queue_xmit+0x564/0x730 [c000000000cf97e0] neigh_hh_output+0xd0/0x180 [c000000000cfa69c] ip_finish_output2+0x31c/0x5c0 [c000000000cfd244] __ip_queue_xmit+0x194/0x4f0 [c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0 [c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0 [c000000000d2d984] tcp_retransmit_skb+0x34/0x130 [c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0 [c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330 [c000000000d317bc] tcp_write_timer+0x5c/0x200 [c000000000243270] call_timer_fn+0x50/0x1c0 [c000000000243704] __run_timers.part.0+0x324/0x460 [c000000000243894] run_timer_softirq+0x54/0xa0 [c000000000ea713c] __do_softirq+0x15c/0x3e0 [c000000000166258] __irq_exit_rcu+0x158/0x190 [c000000000166420] irq_exit+0x20/0x40 [c00000000002853c] timer_interrupt+0x14c/0x2b0 [c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c

The immediate cause of the crash is the access of tx_scrq in the following snippet during a reset, where the tx_scrq can be either NULL or an address that will soon be invalid:

ibmvnic_xmit() { ...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;

if (test_bit(0, &adapter->resetting)) { ...
}

But beyond that, the call to ibmvnic_xmit() itself is not safe during a reset and the reset path attempts to avoid this by stopping the queue in ibmvnic_cleanup(). However just after the queue was stopped, an in-flight ibmvnic_complete_tx() could have restarted the queue even as the reset is progressing.

Since the queue was restarted we could get a call to ibmvnic_xmit() which can then access the bad tx_scrq (or other fields).

We cannot however simply have ibmvnic_complete_tx() check the ->resetting bit and skip starting the queue. This can race at the back-end of a good reset which just restarted the queue but has not cleared the ->resetting bit yet. If we skip restarting the queue due to ->resetting being true, the queue would remain stopped indefinitely potentially leading to transmit timeouts.

IOW ->resetting is too broad for this purpose. Instead use a new flag that indicates whether or not the queues are active. Only the open/ reset paths control when the queues are active. ibmvnic_complete_tx() and others wake up the queue only if the queue is marked active.

So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()

->resetting = true
->tx_queues_active = false disable tx queues ...
->tx_queues_active = true start tx queues

B. Tx interrupt in ibmvnic_complete_tx():

if (->tx_queues_active) netif_wake_subqueue();

To ensure that ->tx_queues_active and state of the queues are consistent, we need a lock which:

- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple
---truncated---

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

Solution

Update the affected kernel package.

See Also

https://atomgit.com/src-openeuler/kernel/issues/403

https://nvd.nist.gov/vuln/detail/CVE-2022-49201

http://www.nessus.org/u?0ae46150

http://www.nessus.org/u?8943ab0e

Plugin Details

Severity: Medium

ID: 383131

File Name: unity_linux_UTSA-2026-167077.nasl

Version: 1.1

Type: Local

Published: 11/19/2026

Updated: 11/19/2026

Supported Sensors: Nessus

Risk Information

VPR

Risk Factor: Low

Score: 3

Percentile: 23.18

CVSS v2

Risk Factor: Low

Base Score: 3.8

Temporal Score: 2.8

Vector: CVSS2#AV:L/AC:H/Au:S/C:N/I:N/A:C

CVSS Score Source: CVE-2022-49201

CVSS v3

Risk Factor: Medium

Base Score: 4.7

Temporal Score: 4.1

Vector: CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

Temporal Vector: CVSS:3.0/E:U/RL:O/RC:C

Vulnerability Information

Required KB Items: Host/local_checks_enabled, Host/cpu, Host/UOS-Server/release, Host/UOS-Server/rpm-list

Exploit Ease: No known exploits are available

Patch Publication Date: 11/18/2026

Vulnerability Publication Date: 2/26/2025

Reference Information

CVE: CVE-2022-49201