CentOS Linux 8.4 [TuxCare] Security Update: bpftool / kernel / kernel-core / kernel-cross-headers / etc Multiple Vulnerabilities (CENTOS8.4:CLSA-2026:1794980888)

high Nessus Plugin ID 382531

Synopsis

The CentOS Linux host is missing one or more security updates.

Description

The CentOS Linux 8.4 host has packages installed that are affected by multiple vulnerabilities as referenced in the TuxCare CENTOS8.4:CLSA-2026:1794980888 advisory.

- In the Linux kernel, the following vulnerability has been resolved: ALSA: line6: reject oversized playback packets Each playback URB is handed a slice of out.buffer that is exactly LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT endpoint, but the number of bytes written into that slice is never compared against it. submit_audio_out_urb() takes the frame count from prev_fsize, which audio_in_callback() derived from the *IN* endpoint's received packet length, and rescales it with the playback frame size; when prev_fsize is still zero it synthesizes a length from the sample rate instead.
On a device declaring a large IN wMaxPacketSize and a small OUT wMaxPacketSize, the resulting memcpy(), or the memset() when the playback stream is idle, runs past its slice and, as the reproducer below shows, beyond the allocation. usb_submit_urb() is not a backstop. max_packet_size_out comes from usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize, while USB core validates a high-speed isochronous length against that base scaled by usb_endpoint_maxp_mult(). A length of up to three times the allocated slice is therefore accepted, and even a rejected URB is only rejected after the write. Reject a packet that does not fit the slice the driver allocated for it. Clamping it instead would silently shorten the capture-derived rate feedback and desynchronize the two streams. BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229) Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002 Workqueue: events line6_startup_work Call Trace: __asan_memcpy (mm/kasan/shadow.c:106) submit_audio_out_urb (sound/usb/line6/playback.c:229) line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291) line6_stream_start (sound/usb/line6/pcm.c:194) line6_pcm_acquire (sound/usb/line6/pcm.c:337) line6_startup_work (sound/usb/line6/driver.c:728) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) The buggy address belongs to the object at ffff888100bbd400 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes inside of allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) (CVE-2026-98836)

- In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e.
pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to do nothing on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid(). Deliberately don't bother saving/restoring the old tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the ASID on emulated INIT, means that a guest can already trigger a flush of all ASIDs at roughly the same rate. And once KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID to each vCPU, this flaw goes away.
(CVE-2026-98715)

- In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on while (len). len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does len -= TKS4_MSGBLOCK_SIZE. As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. (CVE-2026-64487)

- In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages.
Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit.
A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting.
(CVE-2026-63830)

- In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc3-control: Fix TOCTOU in bytes_put and bytes_get In sof_ipc3_bytes_put(), the size used for the memcpy is derived from the old data->size already in the buffer, not the incoming new data's size field. If the new data has a different size, the copy length is wrong: it may truncate valid data or copy stale bytes. Similarly, sof_ipc3_bytes_get() checks data->size against max_size without accounting for the sizeof(struct sof_ipc_ctrl_data) offset of the flex array within the allocation. Fix bytes_put to validate and use the incoming data's sof_abi_hdr.size from ucontrol before copying. Fix bytes_get to subtract sizeof(*cdata) from the bounds check to match the actual available space. (CVE-2026-72301)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

Solution

Update the affected packages based on the guidance in TuxCare advisory CENTOS8.4:CLSA-2026:1794980888.

See Also

https://cve.tuxcare.com/els/releases/CLSA-2026:1794980888

http://www.nessus.org/u?ec3ab8f5

Plugin Details

Severity: High

ID: 382531

File Name: tuxcare_centos_8.4_CLSA-2026-1794980888.nasl

Version: 1.1

Type: Local

Agent: unix

Published: 11/18/2026

Updated: 11/18/2026

Supported Sensors: Continuous Assessment, Nessus Agent, Nessus

Risk Information

VPR

Risk Factor: High

Score: 7.7

Percentile: 98.98

Vendor

Vendor Severity: Important

CVSS v2

Risk Factor: Medium

Base Score: 6.8

Temporal Score: 5.3

Vector: CVSS2#AV:L/AC:L/Au:S/C:C/I:C/A:C

CVSS Score Source: CVE-2022-50071

CVSS v3

Risk Factor: High

Base Score: 7.8

Temporal Score: 7

Vector: CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Temporal Vector: CVSS:3.0/E:P/RL:O/RC:C

Vulnerability Information

Required KB Items: Host/OS/extended-third-party, Host/local_checks_enabled, Host/CentOS/release, Host/CentOS/rpm-list

Exploit Available: true

Exploit Ease: Exploits are available

Patch Publication Date: 11/18/2026

Vulnerability Publication Date: 6/18/2025

Reference Information

CVE: CVE-2022-50071, CVE-2026-63830, CVE-2026-64375, CVE-2026-64487, CVE-2026-64549, CVE-2026-64562, CVE-2026-68093, CVE-2026-68131, CVE-2026-68338, CVE-2026-72066, CVE-2026-72099, CVE-2026-72243, CVE-2026-72284, CVE-2026-72301, CVE-2026-72338, CVE-2026-74443, CVE-2026-74488, CVE-2026-74512, CVE-2026-74743, CVE-2026-80536, CVE-2026-89643, CVE-2026-89846, CVE-2026-90207, CVE-2026-97493, CVE-2026-98176, CVE-2026-98186, CVE-2026-98197, CVE-2026-98204, CVE-2026-98205, CVE-2026-98252, CVE-2026-98262, CVE-2026-98314, CVE-2026-98347, CVE-2026-98358, CVE-2026-98428, CVE-2026-98590, CVE-2026-98715, CVE-2026-98716, CVE-2026-98742, CVE-2026-98836, CVE-2026-99136, CVE-2026-99233, CVE-2026-99281, CVE-2026-99288

CLSA: 2026:1794980888