Detections
Analytics
TencentOS Server 4: kernel (TSSA-2025:0113)
high Nessus Plugin ID 239178
Synopsis
The remote TencentOS Server 4 host is missing one or more security updates.Description
The version of Tencent Linux installed on the remote TencentOS Server 4 host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the TSSA-2025:0113 advisory.Package updates are available for TencentOS Server 4 that fix the following vulnerabilities:
CVE-2024-46772:
In the Linux kernel, the following vulnerability has been resolved:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts.
Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request.
No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page.
Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence.
CVE-2024-50017:
In the Linux kernel, the following vulnerability has been resolved:
net: napi: Prevent overflow of napi_defer_hard_irqs
In commit 6f8b12d661d0 (net: napi: add hard irqs deferral feature) napi_defer_irqs was added to net_device and napi_defer_irqs_count was added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a signed int. Change the type for both from int to u32, and add an overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this patch was S32_MAX (anything larger was an overflow) and thus there are no behavioral changes introduced. If the extra bit is needed in the future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' $ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs' bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len) return -ERANGE;
CVE-2024-50018:
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check denominator crb_pipes before used
[WHAT & HOW] A denominator cannot be 0, and is checked before used.
This fixes 2 DIVIDE_BY_ZERO issues reported by Coverity.
CVE-2024-57882:
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix TCP options overflow.
Syzbot reported the following splat:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace:
<TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline]
__skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline]
__kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314
__netif_receive_skb_one_core net/core/dev.c:5672 [inline]
__netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117
__napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561
__do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline]
__irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK>
Eric noted a probable shinfo->nr_frags corruption, which indeed occurs.
The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit.
Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if
---truncated---
CVE-2024-57876:
In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix resetting msg rx state after topology removal
If the MST topology is removed during the reception of an MST down reply or MST up request sideband message, the drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with the reading/parsing of the message from another thread via drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is possible since the reader/parser doesn't hold any lock while accessing the reception state. This in turn can lead to a memory corruption in the reader/parser as described by commit bd2fccac61b4 (drm/dp_mst: Fix MST sideband message body length check).
Fix the above by resetting the message reception state if needed before reading/parsing a message. Another solution would be to hold the drm_dp_mst_topology_mgr::lock for the whole duration of the message reception/parsing in drm_dp_mst_handle_down_rep() and drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution in this patch.
CVE-2024-57874:
In the Linux kernel, the following vulnerability has been resolved:
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism.
As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited.
Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained.
The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case.
CVE-2024-57850:
In the Linux kernel, the following vulnerability has been resolved:
jffs2: Prevent rtime decompress memory corruption
The rtime decompression routine does not fully check bounds during the entirety of the decompression pass and can corrupt memory outside the decompression buffer if the compressed data is corrupted. This adds the required check to prevent this failure mode.
CVE-2024-57849:
In the Linux kernel, the following vulnerability has been resolved:
s390/cpum_sf: Handle CPU hotplug remove during sampling
CPU hotplug remove handling triggers the following function call sequence:
CPUHP_AP_PERF_S390_SF_ONLINE --> s390_pmu_sf_offline_cpu() ...
CPUHP_AP_PERF_ONLINE --> perf_event_exit_cpu()
The s390 CPUMF sampling CPU hotplug handler invokes:
s390_pmu_sf_offline_cpu() +--> cpusf_pmu_setup() +--> setup_pmc_cpu() +--> deallocate_buffers()
This function de-allocates all sampling data buffers (SDBs) allocated for that CPU at event initialization. It also clears the PMU_F_RESERVED bit. The CPU is gone and can not be sampled.
With the event still being active on the removed CPU, the CPU event hotplug support in kernel performance subsystem triggers the following function calls on the removed CPU:
perf_event_exit_cpu() +--> perf_event_exit_cpu_context() +--> __perf_event_exit_context() +--> __perf_remove_from_context() +--> event_sched_out() +--> cpumsf_pmu_del() +--> cpumsf_pmu_stop() +--> hw_perf_event_update()
to stop and remove the event. During removal of the event, the sampling device driver tries to read out the remaining samples from the sample data buffers (SDBs). But they have already been freed (and may have been re-assigned). This may lead to a use after free situation in which case the samples are most likely invalid. In the best case the memory has not been reassigned and still contains valid data.
Remedy this situation and check if the CPU is still in reserved state (bit PMU_F_RESERVED set). In this case the SDBs have not been released an contain valid data. This is always the case when the event is removed (and no CPU hotplug off occured).
If the PMU_F_RESERVED bit is not set, the SDB buffers are gone.
CVE-2024-57843:
In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix overflow inside virtnet_rq_alloc
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1, then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning of a new frag. When the frag size is larger than PAGE_SIZE, everything is fine. However, if the frag is only one page and the total size of the buffer and virtnet_rq_dma is larger than one page, an overflow may occur.
The commit f9dac92ba908 (virtio_ring: enable premapped mode whatever use_dma_api) introduced this problem. And we reverted some commits to fix this in last linux version. Now we try to enable it and fix this bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix this problem.
CVE-2024-57841:
In the Linux kernel, the following vulnerability has been resolved:
net: fix memory leak in tcp_conn_request()
If inet_csk_reqsk_queue_hash_add() return false, tcp_conn_request() will return without free the dst memory, which allocated in af_ops->route_req.
Here is the kmemleak stack:
unreferenced object 0xffff8881198631c0 (size 240):
comm softirq, pid 0, jiffies 4299266571 (age 1802.392s) hex dump (first 32 bytes):
00 10 9b 03 81 88 ff ff 80 98 da bc ff ff ff ff ................
81 55 18 bb ff ff ff ff 00 00 00 00 00 00 00 00 .U..............
backtrace:
[<ffffffffb93e8d4c>] kmem_cache_alloc+0x60c/0xa80 [<ffffffffba11b4c5>] dst_alloc+0x55/0x250 [<ffffffffba227bf6>] rt_dst_alloc+0x46/0x1d0 [<ffffffffba23050a>] __mkroute_output+0x29a/0xa50 [<ffffffffba23456b>] ip_route_output_key_hash+0x10b/0x240 [<ffffffffba2346bd>] ip_route_output_flow+0x1d/0x90 [<ffffffffba254855>] inet_csk_route_req+0x2c5/0x500 [<ffffffffba26b331>] tcp_conn_request+0x691/0x12c0 [<ffffffffba27bd08>] tcp_rcv_state_process+0x3c8/0x11b0 [<ffffffffba2965c6>] tcp_v4_do_rcv+0x156/0x3b0 [<ffffffffba299c98>] tcp_v4_rcv+0x1cf8/0x1d80 [<ffffffffba239656>] ip_protocol_deliver_rcu+0xf6/0x360 [<ffffffffba2399a6>] ip_local_deliver_finish+0xe6/0x1e0 [<ffffffffba239b8e>] ip_local_deliver+0xee/0x360 [<ffffffffba239ead>] ip_rcv+0xad/0x2f0 [<ffffffffba110943>] __netif_receive_skb_one_core+0x123/0x140
Call dst_release() to free the dst memory when inet_csk_reqsk_queue_hash_add() return false in tcp_conn_request().
CVE-2024-57838:
In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Mark IRQ entries to fix stack depot warnings
The stack depot filters out everything outside of the top interrupt context as an uninteresting or irrelevant part of the stack traces. This helps with stack trace de-duplication, avoiding an explosion of saved stack traces that share the same IRQ context code path but originate from different randomly interrupted points, eventually exhausting the stack depot.
Filtering uses in_irqentry_text() to identify functions within the .irqentry.text and .softirqentry.text sections, which then become the last stack trace entries being saved.
While __do_softirq() is placed into the .softirqentry.text section by common code, populating .irqentry.text is architecture-specific.
Currently, the .irqentry.text section on s390 is empty, which prevents stack depot filtering and de-duplication and could result in warnings like:
Stack depot reached limit capacity WARNING: CPU: 0 PID: 286113 at lib/stackdepot.c:252 depot_alloc_stack+0x39a/0x3c8
with PREEMPT and KASAN enabled.
Fix this by moving the IO/EXT interrupt handlers from .kprobes.text into the .irqentry.text section and updating the kprobes blacklist to include the .irqentry.text section.
This is done only for asynchronous interrupts and explicitly not for program checks, which are synchronous and where the context beyond the program check is important to preserve. Despite machine checks being somewhat in between, they are extremely rare, and preserving context when possible is also of value.
SVCs and Restart Interrupts are not relevant, one being always at the boundary to user space and the other being a one-time thing.
IRQ entries filtering is also optionally used in ftrace function graph, where the same logic applies.
CVE-2024-57807:
In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Fix for a potential deadlock
This fixes a 'possible circular locking dependency detected' warning CPU0 CPU1
---- ---- lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
lock(&instance->reset_mutex);
lock(&shost->scan_mutex);
Fix this by temporarily releasing the reset_mutex.
CVE-2024-57802:
In the Linux kernel, the following vulnerability has been resolved:
netrom: check buffer length before accessing it
Syzkaller reports an uninit value read from ax25cmp when sending raw message through ieee802154 implementation.
===================================================== BUG: KMSAN: uninit-value in ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 ax25cmp+0x3a5/0x460 net/ax25/ax25_addr.c:119 nr_dev_get+0x20e/0x450 net/netrom/nr_route.c:601 nr_route_frame+0x1a2/0xfc0 net/netrom/nr_route.c:774 nr_xmit+0x5a/0x1c0 net/netrom/nr_dev.c:144
__netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564
__dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] raw_sendmsg+0x654/0xc10 net/ieee802154/socket.c:299 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 sock_alloc_send_skb include/net/sock.h:1884 [inline] raw_sendmsg+0x36d/0xc10 net/ieee802154/socket.c:282 ieee802154_sock_sendmsg+0x91/0xc0 net/ieee802154/socket.c:96 sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5037 Comm: syz-executor166 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 =====================================================
This issue occurs because the skb buffer is too small, and it's actual allocation is aligned. This hides an actual issue, which is that nr_route_frame does not validate the buffer size before using it.
Fix this issue by checking skb->len before accessing any fields in skb->data.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
CVE-2024-57801:
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Skip restore TC rules for vport rep without loaded flag
During driver unload, unregister_netdev is called after unloading vport rep. So, the mlx5e_rep_priv is already freed while trying to get rpriv->netdev, or walk rpriv->tc_ht, which results in use-after-free.
So add the checking to make sure access the data of vport rep which is still loaded.
CVE-2024-57798:
In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
CVE-2024-57791:
In the Linux kernel, the following vulnerability has been resolved:
net/smc: check return value of sock_recvmsg when draining clc data
When receiving clc msg, the field length in smc_clc_msg_hdr indicates the length of msg should be received from network and the value should not be fully trusted as it is from the network. Once the value of length exceeds the value of buflen in function smc_clc_wait_msg it may run into deadloop when trying to drain the remaining data exceeding buflen.
This patch checks the return value of sock_recvmsg when draining data in case of deadloop in draining.
CVE-2024-56787:
In the Linux kernel, the following vulnerability has been resolved:
soc: imx8m: Probe the SoC driver as platform driver
With driver_async_probe=* on kernel command line, the following trace is produced because on i.MX8M Plus hardware because the soc-imx8m.c driver calls of_clk_get_by_name() which returns -EPROBE_DEFER because the clock driver is not yet probed. This was not detected during regular testing without driver_async_probe.
Convert the SoC code to platform driver and instantiate a platform device in its current device_initcall() to probe the platform driver. Rework .soc_revision callback to always return valid error code and return SoC revision via parameter. This way, if anything in the .soc_revision callback return -EPROBE_DEFER, it gets propagated to .probe and the .probe will get retried later.
------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at drivers/soc/imx/soc-imx8m.c:115 imx8mm_soc_revision+0xdc/0x180 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-next-20240924-00002-g2062bb554dea #603 Hardware name: DH electronics i.MX8M Plus DHCOM Premium Developer Kit (3) (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : imx8mm_soc_revision+0xdc/0x180 lr : imx8mm_soc_revision+0xd0/0x180 sp : ffff8000821fbcc0 x29: ffff8000821fbce0 x28: 0000000000000000 x27: ffff800081810120 x26: ffff8000818a9970 x25: 0000000000000006 x24: 0000000000824311 x23: ffff8000817f42c8 x22: ffff0000df8be210 x21: fffffffffffffdfb x20: ffff800082780000 x19: 0000000000000001 x18: ffffffffffffffff x17: ffff800081fff418 x16: ffff8000823e1000 x15: ffff0000c03b65e8 x14: ffff0000c00051b0 x13: ffff800082790000 x12: 0000000000000801 x11: ffff80008278ffff x10: ffff80008209d3a6 x9 : ffff80008062e95c x8 : ffff8000821fb9a0 x7 : 0000000000000000 x6 : 00000000000080e3 x5 : ffff0000df8c03d8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : fffffffffffffdfb x0 : fffffffffffffdfb Call trace:
imx8mm_soc_revision+0xdc/0x180 imx8_soc_init+0xb0/0x1e0 do_one_initcall+0x94/0x1a8 kernel_init_freeable+0x240/0x2a8 kernel_init+0x28/0x140 ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]--- SoC: i.MX8MP revision 1.1
CVE-2024-56786:
In the Linux kernel, the following vulnerability has been resolved:
bpf: put bpf_link's program when link is safe to be deallocated
In general, BPF link's underlying BPF program should be considered to be reachable through attach hook -> link -> prog chain, and, pessimistically, we have to assume that as long as link's memory is not safe to free, attach hook's code might hold a pointer to BPF program and use it.
As such, it's not (generally) correct to put link's program early before waiting for RCU GPs to go through. More eager bpf_prog_put() that we currently do is mostly correct due to BPF program's release code doing similar RCU GP waiting, but as will be shown in the following patches, BPF program can be non-sleepable (and, thus, reliant on only classic RCU GP), while BPF link's attach hook can have sleepable semantics and needs to be protected by RCU Tasks Trace, and for such cases BPF link has to go through RCU Tasks Trace + classic RCU GPs before being deallocated. And so, if we put BPF program early, we might free BPF program before we free BPF link, leading to use-after-free situation.
So, this patch defers bpf_prog_put() until we are ready to perform bpf_link's deallocation. At worst, this delays BPF program freeing by one extra RCU GP, but that seems completely acceptable. Alternatively, we'd need more elaborate ways to determine BPF hook, BPF link, and BPF program lifetimes, and how they relate to each other, which seems like an unnecessary complication.
Note, for most BPF links we still will perform eager bpf_prog_put() and link dealloc, so for those BPF links there are no observable changes whatsoever. Only BPF links that use deferred dealloc might notice slightly delayed freeing of BPF programs.
Also, to reduce code and logic duplication, extract program put + link dealloc logic into bpf_link_dealloc() helper.
CVE-2024-56783:
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
cgroup maximum depth is INT_MAX by default, there is a cgroup toggle to restrict this maximum depth to a more reasonable value not to harm performance. Remove unnecessary WARN_ON_ONCE which is reachable from userspace.
CVE-2024-56780:
In the Linux kernel, the following vulnerability has been resolved:
quota: flush quota_release_work upon quota writeback
One of the paths quota writeback is called from is:
freeze_super() sync_filesystem() ext4_sync_fs() dquot_writeback_dquots()
Since we currently don't always flush the quota_release_work queue in this path, we can end up with the following race:
1. dquot are added to releasing_dquots list during regular operations.
2. FS Freeze starts, however, this does not flush the quota_release_work queue.
3. Freeze completes.
4. Kernel eventually tries to flush the workqueue while FS is frozen which hits a WARN_ON since transaction gets started during frozen state:
ext4_journal_check_start+0x28/0x110 [ext4] (unreliable)
__ext4_journal_start_sb+0x64/0x1c0 [ext4] ext4_release_dquot+0x90/0x1d0 [ext4] quota_release_workfn+0x43c/0x4d0
Which is the following line:
WARN_ON(sb->s_writers.frozen == SB_FREEZE_COMPLETE);
Which ultimately results in generic/390 failing due to dmesg noise. This was detected on powerpc machine 15 cores.
To avoid this, make sure to flush the workqueue during dquot_writeback_dquots() so we dont have any pending workitems after freeze.
CVE-2024-56778:
In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_hqvdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.
CVE-2024-56777:
In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers in sti_gdp_atomic_check
The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.
CVE-2024-56776:
In the Linux kernel, the following vulnerability has been resolved:
drm/sti: avoid potential dereference of error pointers
The return value of drm_atomic_get_crtc_state() needs to be checked. To avoid use of error pointer 'crtc_state' in case of the failure.
CVE-2024-56774:
In the Linux kernel, the following vulnerability has been resolved:
btrfs: add a sanity check for btrfs root in btrfs_search_slot()
Syzbot reports a null-ptr-deref in btrfs_search_slot().
The reproducer is using rescue=ibadroots, and the extent tree root is corrupted thus the extent tree is NULL.
When scrub tries to search the extent tree to gather the needed extent info, btrfs_search_slot() doesn't check if the target root is NULL or not, resulting the null-ptr-deref.
Add sanity check for btrfs root before using it in btrfs_search_slot().
CVE-2024-56770:
In the Linux kernel, the following vulnerability has been resolved:
net/sched: netem: account for backlog updates from child qdisc
In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds.
In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc.
'qlen' then indicates the wrong number of packets in the tfifo.
If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated.
If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full.
Reproduce the bug:
Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows:
$ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms
Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics:
$ tc -s qdisc show dev <oif>
Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets):
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0
Statistics after the fix:
qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0
tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'.
The interface fully stops transferring packets and locks. In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted.
This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics.
CVE-2024-56769:
In the Linux kernel, the following vulnerability has been resolved:
media: dvb-frontends: dib3000mb: fix uninit-value in dib3000_write_reg
Syzbot reports [1] an uninitialized value issue found by KMSAN in dib3000_read_reg().
Local u8 rb[2] is used in i2c_transfer() as a read buffer; in case that call fails, the buffer may end up with some undefined values.
Since no elaborate error handling is expected in dib3000_write_reg(), simply zero out rb buffer to mitigate the problem.
[1] Syzkaller report dvb-usb: bulk message failed: -22 (6/0) ===================================================== BUG: KMSAN: uninit-value in dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dib3000mb_attach+0x2d8/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 dibusb_dib3000mb_frontend_attach+0x155/0x2f0 drivers/media/usb/dvb-usb/dibusb-mb.c:31 dvb_usb_adapter_frontend_init+0xed/0x9a0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:90 [inline] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:186 [inline] dvb_usb_device_init+0x25a8/0x3760 drivers/media/usb/dvb-usb/dvb-usb-init.c:310 dibusb_probe+0x46/0x250 drivers/media/usb/dvb-usb/dibusb-mb.c:110 ...
Local variable rb created at:
dib3000_read_reg+0x86/0x4e0 drivers/media/dvb-frontends/dib3000mb.c:54 dib3000mb_attach+0x123/0x3c0 drivers/media/dvb-frontends/dib3000mb.c:758 ...
CVE-2024-56763:
In the Linux kernel, the following vulnerability has been resolved:
tracing: Prevent bad count for tracing_cpumask_write
If a large count is provided, it will trigger a warning in bitmap_parse_user.
Also check zero for it.
CVE-2024-56760:
In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596 pci_msi_setup_msi_irqs+0x2c/0x32 pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent domain is associated with the device or not. There is a check for MSI-X, which has a legacy assumption. But that legacy fallback assumption is only valid when legacy support is enabled, but otherwise the check should simply return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support without implementing the legacy fallbacks. There are weak implementations which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add the missing supported check into the MSI enable path to complete it.
CVE-2024-56756:
In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix freeing of the HMB descriptor table
The HMB descriptor table is sized to the maximum number of descriptors that could be used for a given device, but __nvme_alloc_host_mem could break out of the loop earlier on memory allocation failure and end up using less descriptors than planned for, which leads to an incorrect size passed to dma_free_coherent.
In practice this was not showing up because the number of descriptors tends to be low and the dma coherent allocator always allocates and frees at least a page.
CVE-2024-56755:
In the Linux kernel, the following vulnerability has been resolved:
netfs/fscache: Add a memory barrier for FSCACHE_VOLUME_CREATING
In fscache_create_volume(), there is a missing memory barrier between the bit-clearing operation and the wake-up operation. This may cause a situation where, after a wake-up, the bit-clearing operation hasn't been detected yet, leading to an indefinite wait. The triggering process is as follows:
[cookie1] [cookie2] [volume_work] fscache_perform_lookup fscache_create_volume fscache_perform_lookup fscache_create_volume fscache_create_volume_work cachefiles_acquire_volume clear_and_wake_up_bit test_and_set_bit test_and_set_bit goto maybe_wait goto no_wait
In the above process, cookie1 and cookie2 has the same volume. When cookie1 enters the -no_wait- process, it will clear the bit and wake up the waiting process. If a barrier is missing, it may cause cookie2 to remain in the
-wait- process indefinitely.
In commit 3288666c7256 (fscache: Use clear_and_wake_up_bit() in fscache_create_volume_work()), barriers were added to similar operations in fscache_create_volume_work(), but fscache_create_volume() was missed.
By combining the clear and wake operations into clear_and_wake_up_bit() to fix this issue.
CVE-2024-56752:
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'.
CVE-2024-56751:
In the Linux kernel, the following vulnerability has been resolved:
ipv6: release nexthop on device removal
The CI is hitting some aperiodic hangup at device removal time in the pmtu.sh self-test:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 6 ref_tracker: veth_A-R1@ffff888013df15d8 has 1/5 users at dst_init+0x84/0x4a0 dst_alloc+0x97/0x150 ip6_dst_alloc+0x23/0x90 ip6_rt_pcpu_alloc+0x1e6/0x520 ip6_pol_route+0x56f/0x840 fib6_rule_lookup+0x334/0x630 ip6_route_output_flags+0x259/0x480 ip6_dst_lookup_tail.constprop.0+0x5c2/0x940 ip6_dst_lookup_flow+0x88/0x190 udp_tunnel6_dst_lookup+0x2a7/0x4c0 vxlan_xmit_one+0xbde/0x4a50 [vxlan] vxlan_xmit+0x9ad/0xf20 [vxlan] dev_hard_start_xmit+0x10e/0x360
__dev_queue_xmit+0xf95/0x18c0 arp_solicit+0x4a2/0xe00 neigh_probe+0xaa/0xf0
While the first suspect is the dst_cache, explicitly tracking the dst owing the last device reference via probes proved such dst is held by the nexthop in the originating fib6_info.
Similar to commit f5b51fe804ec (ipv6: route: purge exception on removal), we need to explicitly release the originating fib info when disconnecting a to-be-removed device from a live ipv6 dst: move the fib6_info cleanup into ip6_dst_ifdown().
Tested running:
./pmtu.sh cleanup_ipv6_exception
in a tight loop for more than 400 iterations with no spat, running an unpatched kernel I observed a splat every ~10 iterations.
CVE-2024-56748:
In the Linux kernel, the following vulnerability has been resolved:
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
Hook qed_ops->common->sb_init = qed_sb_init does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
CVE-2024-56747:
In the Linux kernel, the following vulnerability has been resolved:
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
Hook qedi_ops->common->sb_init = qed_sb_init does not release the DMA memory sb_virt when it fails. Add dma_free_coherent() to free it. This is the same way as qedr_alloc_mem_sb() and qede_alloc_mem_sb().
CVE-2024-56745:
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix reset_method_store() memory leak
In reset_method_store(), a string is allocated via kstrndup() and assigned to the local options. options is then used in with strsep() to find spaces:
while ((name = strsep(&options, )) != NULL) {
If there are no remaining spaces, then options is set to NULL by strsep(), so the subsequent kfree(options) doesn't free the memory allocated via kstrndup().
Fix by using a separate tmp_options to iterate with strsep() so options is preserved.
CVE-2024-56744:
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid potential deadlock in f2fs_record_stop_reason()
syzbot reports deadlock issue of f2fs as below:
====================================================== WARNING: possible circular locking dependency detected 6.12.0-rc3-syzkaller-00087-gc964ced77262 #0 Not tainted
------------------------------------------------------ kswapd0/79 is trying to acquire lock:
ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_down_write fs/f2fs/f2fs.h:2199 [inline] ffff888011824088 (&sbi->sb_lock){++++}-{3:3}, at: f2fs_record_stop_reason+0x52/0x1d0 fs/f2fs/super.c:4068
but task is already holding lock:
ffff88804bd92610 (sb_internal#2){.+.+}-{0:0}, at: f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (sb_internal#2){.+.+}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825 percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1716 [inline] sb_start_intwrite+0x4d/0x1c0 include/linux/fs.h:1899 f2fs_evict_inode+0x662/0x15c0 fs/f2fs/inode.c:842 evict+0x4e8/0x9b0 fs/inode.c:725 f2fs_evict_inode+0x1a4/0x15c0 fs/f2fs/inode.c:807 evict+0x4e8/0x9b0 fs/inode.c:725 dispose_list fs/inode.c:774 [inline] prune_icache_sb+0x239/0x2f0 fs/inode.c:963 super_cache_scan+0x38c/0x4b0 fs/super.c:223 do_shrink_slab+0x701/0x1160 mm/shrinker.c:435 shrink_slab+0x1093/0x14d0 mm/shrinker.c:662 shrink_one+0x43b/0x850 mm/vmscan.c:4818 shrink_many mm/vmscan.c:4879 [inline] lru_gen_shrink_node mm/vmscan.c:4957 [inline] shrink_node+0x3799/0x3de0 mm/vmscan.c:5937 kswapd_shrink_node mm/vmscan.c:6765 [inline] balance_pgdat mm/vmscan.c:6957 [inline] kswapd+0x1ca3/0x3700 mm/vmscan.c:7226 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #1 (fs_reclaim){+.+.}-{0:0}:
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__fs_reclaim_acquire mm/page_alloc.c:3834 [inline] fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3848 might_alloc include/linux/sched/mm.h:318 [inline] prepare_alloc_pages+0x147/0x5b0 mm/page_alloc.c:4493
__alloc_pages_noprof+0x16f/0x710 mm/page_alloc.c:4722 alloc_pages_mpol_noprof+0x3e8/0x680 mm/mempolicy.c:2265 alloc_pages_noprof mm/mempolicy.c:2345 [inline] folio_alloc_noprof+0x128/0x180 mm/mempolicy.c:2352 filemap_alloc_folio_noprof+0xdf/0x500 mm/filemap.c:1010 do_read_cache_folio+0x2eb/0x850 mm/filemap.c:3787 read_mapping_folio include/linux/pagemap.h:1011 [inline] f2fs_commit_super+0x3c0/0x7d0 fs/f2fs/super.c:4032 f2fs_record_stop_reason+0x13b/0x1d0 fs/f2fs/super.c:4079 f2fs_handle_critical_error+0x2ac/0x5c0 fs/f2fs/super.c:4174 f2fs_write_inode+0x35f/0x4d0 fs/f2fs/inode.c:785 write_inode fs/fs-writeback.c:1503 [inline]
__writeback_single_inode+0x711/0x10d0 fs/fs-writeback.c:1723 writeback_single_inode+0x1f3/0x660 fs/fs-writeback.c:1779 sync_inode_metadata+0xc4/0x120 fs/fs-writeback.c:2849 f2fs_release_file+0xa8/0x100 fs/f2fs/file.c:1941
__fput+0x23f/0x880 fs/file_table.c:431 task_work_run+0x24f/0x310 kernel/task_work.c:228 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218 do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f
---truncated---
CVE-2024-56741:
In the Linux kernel, the following vulnerability has been resolved:
apparmor: test: Fix memory leak for aa_unpack_strdup()
The string allocated by kmemdup() in aa_unpack_strdup() is not freed and cause following memory leaks, free them to fix it.
unreferenced object 0xffffff80c6af8a50 (size 8):
comm kunit_try_catch, pid 225, jiffies 4294894407 hex dump (first 8 bytes):
74 65 73 74 69 6e 67 00 testing.
backtrace (crc 5eab668b):
[<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<000000008ecde918>] policy_unpack_test_unpack_strdup_with_null_name+0xf8/0x3ec [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20 unreferenced object 0xffffff80c2a29090 (size 8):
comm kunit_try_catch, pid 227, jiffies 4294894409 hex dump (first 8 bytes):
74 65 73 74 69 6e 67 00 testing.
backtrace (crc 5eab668b):
[<0000000001e3714d>] kmemleak_alloc+0x34/0x40 [<000000006e6c7776>] __kmalloc_node_track_caller_noprof+0x300/0x3e0 [<000000006870467c>] kmemdup_noprof+0x34/0x60 [<000000001176bb03>] aa_unpack_strdup+0xd0/0x18c [<0000000046a45c1a>] policy_unpack_test_unpack_strdup_with_name+0xd0/0x3c4 [<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac [<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec [<00000000adf936cf>] kthread+0x2e8/0x374 [<0000000041bb1628>] ret_from_fork+0x10/0x20
CVE-2024-56739:
In the Linux kernel, the following vulnerability has been resolved:
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value (possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue, they will continually expire, may causing kernel softlockup.
CVE-2024-56729:
In the Linux kernel, the following vulnerability has been resolved:
smb: Initialize cfid->tcon before performing network ops
Avoid leaking a tcon ref when a lease break races with opening the cached directory. Processing the leak break might take a reference to the tcon in cached_dir_lease_break() and then fail to release the ref in cached_dir_offload_close, since cfid->tcon is still NULL.
CVE-2024-56724:
In the Linux kernel, the following vulnerability has been resolved:
mfd: intel_soc_pmic_bxtwc: Use IRQ domain for TMU device
While design wise the idea of converting the driver to use the hierarchy of the IRQ chips is correct, the implementation has (inherited) flaws. This was unveiled when platform_get_irq() had started WARN() on IRQ 0 that is supposed to be a Linux IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD device separately, as the domain is not the same for all of them.
CVE-2024-56722:
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix cpu stuck caused by printings during reset
During reset, cmd to destroy resources such as qp, cq, and mr may fail, and error logs will be printed. When a large number of resources are destroyed, there will be lots of printings, and it may lead to a cpu stuck.
Delete some unnecessary printings and replace other printing functions in these paths with the ratelimited version.
CVE-2024-56720:
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Several fixes to bpf_msg_pop_data
Several fixes to bpf_msg_pop_data, 1. In sk_msg_shift_left, we should put_page 2. if (len == 0), return early is better 3. pop the entire sk_msg (last == msg->sg.size) should be supported 4. Fix for the value of variable a 5. In sk_msg_shift_left, after shifting, i has already pointed to the next element. Addtional sk_msg_iter_var_next may result in BUG.
CVE-2024-56719:
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO DMA API usage causing oops
Commit 66600fac7a98 (net: stmmac: TSO: Fix unbalanced DMA map/unmap for non-paged SKB data) moved the assignment of tx_skbuff_dma[]'s members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that the dma cookie passed to dma_unmap_single() is the same as the value returned from dma_map_single(). However, by moving the assignment later, this is not the case when priv->dma_cap.addr64 > 32 as des is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining des as the original DMA cookie, and use tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/
CVE-2024-56718:
In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect link down work from execute after lgr freed
link down work may be scheduled before lgr freed but execute after lgr freed, which may result in crash. So it is need to hold a reference before shedule link down work, and put the reference after work executed or canceled.
The relevant crash call stack as follows:
list_del corruption. prev->next should be ffffb638c9c0fe20, but was 0000000000000000
------------[ cut here ]------------ kernel BUG at lib/list_debug.c:51! invalid opcode: 0000 [#1] SMP NOPTI CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014 Workqueue: events smc_link_down_work [smc] RIP: 0010:__list_del_entry_valid.cold+0x31/0x47 RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086 RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000 RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38 R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002 R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0 FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace:
rwsem_down_write_slowpath+0x17e/0x470 smc_link_down_work+0x3c/0x60 [smc] process_one_work+0x1ac/0x350 worker_thread+0x49/0x2f0 ? rescuer_thread+0x360/0x360 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30
CVE-2024-56716:
In the Linux kernel, the following vulnerability has been resolved:
netdevsim: prevent bad user input in nsim_dev_health_break_write()
If either a zero count or a large one is provided, kernel can crash.
CVE-2024-56715:
In the Linux kernel, the following vulnerability has been resolved:
ionic: Fix netdev notifier unregister on failure
If register_netdev() fails, then the driver leaks the netdev notifier.
Fix this by calling ionic_lif_unregister() on register_netdev() failure. This will also call ionic_lif_unregister_phc() if it has already been registered.
CVE-2024-56710:
In the Linux kernel, the following vulnerability has been resolved:
ceph: fix memory leak in ceph_direct_read_write()
The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked and pages remain pinned if ceph_alloc_sparse_ext_map() fails.
There is no need to delay the allocation of sparse_ext map until after the bvecs array is set up, so fix this by moving sparse_ext allocation a bit earlier. Also, make a similar adjustment in __ceph_sync_read() for consistency (a leak of the same kind in __ceph_sync_read() has been addressed differently).
CVE-2024-56709:
In the Linux kernel, the following vulnerability has been resolved:
io_uring: check if iowq is killed before queuing
task work can be executed after the task has gone through io_uring termination, whether it's the final task_work run or the fallback path.
In this case, task work will find ->io_wq being already killed and null'ed, which is a problem if it then tries to forward the request to io_queue_iowq(). Make io_queue_iowq() fail requests in this case.
Note that it also checks PF_KTHREAD, because the user can first close a DEFER_TASKRUN ring and shortly after kill the task, in which case
->iowq check would race.
CVE-2024-56708:
In the Linux kernel, the following vulnerability has been resolved:
EDAC/igen6: Avoid segmentation fault on module unload
The segmentation fault happens because:
During modprobe:
1. In igen6_probe(), igen6_pvt will be allocated with kzalloc() 2. In igen6_register_mci(), mci->pvt_info will point to &igen6_pvt->imc[mc]
During rmmod:
1. In mci_release() in edac_mc.c, it will kfree(mci->pvt_info) 2. In igen6_remove(), it will kfree(igen6_pvt);
Fix this issue by setting mci->pvt_info to NULL to avoid the double kfree.
CVE-2024-56705:
In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: Add check for rgby_data memory allocation failure
In ia_css_3a_statistics_allocate(), there is no check on the allocation result of the rgby_data memory. If rgby_data is not successfully allocated, it may trigger the assert(host_stats->rgby_data) assertion in ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue.
CVE-2024-56701:
In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore
The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because the code calls kmalloc() while holding it, which can sleep:
# echo 1 > /proc/powerpc/vcpudispatch_stats BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh preempt_count: 1, expected: 0 3 locks held by sh/199:
#0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438 #1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4 #2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4 CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries Call Trace:
dump_stack_lvl+0x130/0x148 (unreliable)
__might_resched+0x174/0x410 kmem_cache_alloc_noprof+0x340/0x3d0 alloc_dtl_buffers+0x124/0x1ac vcpudispatch_stats_write+0x2a8/0x5f4 proc_reg_write+0xf4/0x150 vfs_write+0xfc/0x438 ksys_write+0x88/0x148 system_call_exception+0x1c4/0x5a0 system_call_common+0xf4/0x258
CVE-2024-56693:
In the Linux kernel, the following vulnerability has been resolved:
brd: defer automatic disk creation until module initialization succeeds
My colleague Wupeng found the following problems during fault injection:
BUG: unable to handle page fault for address: fffffbfff809d073 PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:__asan_load8+0x4c/0xa0 ...
Call Trace:
<TASK> blkdev_put_whole+0x41/0x70 bdev_release+0x1a3/0x250 blkdev_release+0x11/0x20
__fput+0x1d7/0x4a0 task_work_run+0xfc/0x180 syscall_exit_to_user_mode+0x1de/0x1f0 do_syscall_64+0x6b/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e
loop_init() is calling loop_add() after __register_blkdev() succeeds and is ignoring disk_add() failure from loop_add(), for loop_add() failure is not fatal and successfully created disks are already visible to bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev() succeeds and is releasing successfully created disks when brd_init() returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd brd_init brd_alloc(0) // success add_disk disk_scan_partitions bdev_file_open_by_dev // alloc file fput // won't free until back to userspace brd_alloc(1) // failed since mem alloc error inject // error path for modprobe will release code segment // back to userspace
__fput blkdev_release bdev_release blkdev_put_whole bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd brd_init brd_alloc(0) // success open(/dev/ram0) brd_alloc(1) // fail // error path for modprobe
close(/dev/ram0) ...
/* UAF! */ bdev->bd_disk->fops->release
Fix this problem by following what loop_init() does. Besides, reintroduce brd_devices_mutex to help serialize modifications to brd_list.
CVE-2024-56692:
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2534! RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534 Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909 f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288 f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856 evict+0x4e8/0x9b0 fs/inode.c:723 f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986 f2fs_create+0x357/0x530 fs/f2fs/namei.c:394 lookup_open fs/namei.c:3595 [inline] open_last_lookups fs/namei.c:3694 [inline] path_openat+0x1c03/0x3590 fs/namei.c:3930 do_filp_open+0x235/0x490 fs/namei.c:3960 do_sys_openat2+0x13e/0x1d0 fs/open.c:1415 do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be corrupted, then it will cause system panic when using it in f2fs_invalidate_blocks(), to avoid this, let's add sanity check on nat blkaddr in truncate_node().
CVE-2024-56690:
In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
Since commit 8f4f68e788c3 (crypto: pcrypt - Fix hungtask for PADATA_RESET), the pcrypt encryption and decryption operations return
-EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns
-EAGAIN, the unnecessary panic will occur when panic_on_warn set 1.
Fix this issue by calling crypto layer directly without parallelization in that case.
CVE-2024-56688:
In the Linux kernel, the following vulnerability has been resolved:
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
Since transport->sock has been set to NULL during reset transport, XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request() to dereference the transport->sock that has been set to NULL.
CVE-2024-56687:
In the Linux kernel, the following vulnerability has been resolved:
usb: musb: Fix hardware lockup on first Rx endpoint request
There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls):
req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300)
According to the docstring of usb_ep_queue(), this should not happen:
Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations.
In fact, a hardware lockup might occur in the following sequence:
1. The gadget is initialized using musb_gadget_enable().
2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt.
3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by the glue layer handler, but the RXPKTRDY flag remains set.
4. The first request is enqueued using usb_ep_queue(), leading to the call of req->complete(), as shown in the call trace above.
5. If the callback enables IRQs and another packet is waiting, step (3) repeats. The request queue is empty because usb_g_giveback() removes the request before invoking the callback.
6. The endpoint remains locked up, as the interrupt triggered by hardware setting the RXPKTRDY flag has been handled, but the flag itself remains set.
For this scenario to occur, it is only necessary for IRQs to be enabled at some point during the complete callback. This happens with the USB Ethernet gadget, whose rx_complete() callback calls netif_rx(). If called in the task context, netif_rx() disables the bottom halves (BHs). When the BHs are re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The gadget itself is initialized at module load (or at boot if built-in), but the first request is enqueued when the network interface is brought up, triggering rx_complete() in the task context via ioctl(). If a packet arrives while the interface is down, it can prevent the interface from receiving any further packets from the USB host.
The situation is quite complicated with many parties involved. This particular issue can be resolved in several possible ways:
1. Ensure that callbacks never enable IRQs. This would be difficult to enforce, as discovering how netif_rx() interacts with interrupts was already quite challenging and u_ether is not the only function driver.
Similar bugs could be hidden in other drivers as well.
2. Disable MUSB interrupts in musb_g_giveback() before calling the callback and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(), for example). This would ensure that MUSB interrupts are not handled during the callback, even if IRQs are enabled. In fact, it would allow IRQs to be enabled when releasing the lock. However, this feels like an inelegant hack.
3. Modify the interrupt handler to clear the RXPKTRDY flag if the request queue is empty. While this approach also feels like a hack, it wastes CPU time by attempting to handle incoming packets when the software is not ready to process them.
4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart().
This ensures that the hardware can receive packets when there is at least one request in the queue. Once I
---truncated---
CVE-2024-56678:
In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm/fault: Fix kfence page fault reporting
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via copy_from_kernel_nofault() can cause page faults. Since *_nofault() functions define their own fixup table for handling fault, use that instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the fault. If there is an entry then we let the fixup table handler handle the page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
=============================== BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0 Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0 Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0 0xc00000000665f950 read_kcore_iter+0x57c/0xa04 proc_reg_read_iter+0xe4/0x16c vfs_read+0x320/0x3ec ksys_read+0x90/0x154 system_call_exception+0x120/0x310 system_call_vectored_common+0x15c/0x2ec
CVE-2024-56677:
In the Linux kernel, the following vulnerability has been resolved:
powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE, since pageblock_order is still zero and it gets initialized later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is - early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in cma_init_reserved_mem(). Then later cma_activate_area() can hit a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(), where other such cma reservations also gets called.
<stack trace> ============== page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010 flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable) free_pcppages_bulk+0x1a8/0x2c8 free_unref_page_commit+0x3d4/0x4e4 free_unref_page+0x458/0x6d0 init_cma_reserved_pageblock+0x114/0x198 cma_init_reserved_areas+0x270/0x3e0 do_one_initcall+0x80/0x2f8 kernel_init_freeable+0x33c/0x530 kernel_init+0x34/0x26c ret_from_kernel_user_thread+0x14/0x1c
CVE-2024-56675:
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU protection. But it is possible to attach a non-sleepable BPF program to a uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after removing the attachment of a bpf_prog to a perf_event.
CVE-2024-56672:
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix UAF in blkcg_unpin_online()
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To walk up, it uses blkcg_parent(blkcg) but it was calling that after blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the following UAF:
================================================================== BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270 Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 Workqueue: cgwb_release cgwb_release_workfn Call Trace:
<TASK> dump_stack_lvl+0x27/0x80 print_report+0x151/0x710 kasan_report+0xc0/0x100 blkcg_unpin_online+0x15a/0x270 cgwb_release_workfn+0x194/0x480 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30 </TASK> ...
Freed by task 1944:
kasan_save_track+0x2b/0x70 kasan_save_free_info+0x3c/0x50
__kasan_slab_free+0x33/0x50 kfree+0x10c/0x330 css_free_rwork_fn+0xe6/0xb30 process_scheduled_works+0x71b/0xe20 worker_thread+0x82a/0xbd0 kthread+0x242/0x2c0 ret_from_fork+0x33/0x70 ret_from_fork_asm+0x1a/0x30
Note that the UAF is not easy to trigger as the free path is indirected behind a couple RCU grace periods and a work item execution. I could only trigger it with artifical msleep() injected in blkcg_unpin_online().
Fix it by reading the parent pointer before destroying the blkcg's blkg's.
CVE-2024-56667:
In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix NULL pointer dereference in capture_engine
When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info().
(cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d)
CVE-2024-56665:
In the Linux kernel, the following vulnerability has been resolved:
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event (hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array and second perf_event_detach_bpf_prog will crash, because tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad
CVE-2024-56664:
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix race between element replace and close()
Element replace (with a socket different from the one stored) may race with socket's close() link popping & unlinking. __sock_map_delete() unconditionally unrefs the (wrong) element:
// set map[0] = s0 map_update_elem(map, 0, s0)
// drop fd of s0 close(s0) sock_map_close() lock_sock(sk) (s0!) sock_map_remove_links(sk) link = sk_psock_link_pop() sock_map_unlink(sk, link) sock_map_delete_from_link // replace map[0] with s1 map_update_elem(map, 0, s1) sock_map_update_elem (s1!) lock_sock(sk) sock_map_update_common psock = sk_psock(sk) spin_lock(&stab->lock) osk = stab->sks[idx] sock_map_add_link(..., &stab->sks[idx]) sock_map_unref(osk, &stab->sks[idx]) psock = sk_psock(osk) sk_psock_put(sk, psock) if (refcount_dec_and_test(&psock)) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) unlock_sock(sk)
__sock_map_delete spin_lock(&stab->lock) sk = *psk // s1 replaced s0; sk == s1 if (!sk_test || sk_test == sk) // sk_test (s0) != sk (s1); no branch sk = xchg(psk, NULL) if (sk) sock_map_unref(sk, psk) // unref s1; sks[idx] will dangle psock = sk_psock(sk) sk_psock_put(sk, psock) if (refcount_dec_and_test()) sk_psock_drop(sk, psock) spin_unlock(&stab->lock) release_sock(sk)
Then close(map) enqueues bpf_map_free_deferred, which finally calls sock_map_free(). This results in some refcount_t warnings along with a KASAN splat [1].
Fix __sock_map_delete(), do not allow sock_map_unref() on elements that may have been replaced.
[1]:
BUG: KASAN: slab-use-after-free in sock_map_free+0x10e/0x330 Write of size 4 at addr ffff88811f5b9100 by task kworker/u64:12/1063
CPU: 14 UID: 0 PID: 1063 Comm: kworker/u64:12 Not tainted 6.12.0+ #125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Workqueue: events_unbound bpf_map_free_deferred Call Trace:
<TASK> dump_stack_lvl+0x68/0x90 print_report+0x174/0x4f6 kasan_report+0xb9/0x190 kasan_check_range+0x10f/0x1e0 sock_map_free+0x10e/0x330 bpf_map_free_deferred+0x173/0x320 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 </TASK>
Allocated by task 1202:
kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90 kmem_cache_alloc_noprof+0x131/0x450 sk_prot_alloc+0x5b/0x220 sk_alloc+0x2c/0x870 unix_create1+0x88/0x8a0 unix_create+0xc5/0x180
__sock_create+0x241/0x650
__sys_socketpair+0x1ce/0x420
__x64_sys_socketpair+0x92/0x100 do_syscall_64+0x93/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 46:
kasan_save_stack+0x1e/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70 kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0 sk_psock_destroy+0x73e/0xa50 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x29e/0x360 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30
The bu
---truncated---
CVE-2024-56663:
In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
Since the netlink attribute range validation provides inclusive checking, the *max* of attribute NL80211_ATTR_MLO_LINK_ID should be IEEE80211_MLD_MAX_NUM_LINKS - 1 otherwise causing an off-by-one.
One crash stack for demonstration:
================================================================== BUG: KASAN: wild-memory-access in ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 Read of size 6 at addr 001102080000000c by task fuzzer.386/9508
CPU: 1 PID: 9508 Comm: syz.1.386 Not tainted 6.1.70 #2 Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_report+0xe0/0x750 mm/kasan/report.c:398 kasan_report+0x139/0x170 mm/kasan/report.c:495 kasan_check_range+0x287/0x290 mm/kasan/generic.c:189 memcpy+0x25/0x60 mm/kasan/shadow.c:65 ieee80211_tx_control_port+0x3b6/0xca0 net/mac80211/tx.c:5939 rdev_tx_control_port net/wireless/rdev-ops.h:761 [inline] nl80211_tx_control_port+0x7b3/0xc40 net/wireless/nl80211.c:15453 genl_family_rcv_msg_doit+0x22e/0x320 net/netlink/genetlink.c:756 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x539/0x740 net/netlink/genetlink.c:850 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd
Update the policy to ensure correct validation.
CVE-2024-56662:
In the Linux kernel, the following vulnerability has been resolved:
acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl
Fix an issue detected by syzbot with KASAN:
BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459
The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space.
To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array.
CVE-2024-56661:
In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in cleanup_bearer()
syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() :
atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count);
Fix this by caching the tipc_net pointer.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
CVE-2024-56660:
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: DR, prevent potential error pointer dereference
The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that ret can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag().
CVE-2024-56659:
In the Linux kernel, the following vulnerability has been resolved:
net: lapb: increase LAPB_HEADER_LEN
It is unclear if net/lapb code is supposed to be ready for 8021q.
We can at least avoid crashes like the following :
skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2
------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace:
<TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
__dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
CVE-2024-56658:
In the Linux kernel, the following vulnerability has been resolved:
net: defer final 'struct net' free in netns dismantle
Ilya reported a slab-use-after-free in dst_destroy [1]
Issue is in xfrm6_net_init() and xfrm4_net_init() :
They copy xfrm[46]_dst_ops_template into net->xfrm.xfrm[46]_dst_ops.
But net structure might be freed before all the dst callbacks are called. So when dst_destroy() calls later :
if (dst->ops->destroy) dst->ops->destroy(dst);
dst->ops points to the old net->xfrm.xfrm[46]_dst_ops, which has been freed.
See a relevant issue fixed in :
ac888d58869b (net: do not delay dst_entries_add() in dst_release())
A fix is to queue the 'struct net' to be freed after one another cleanup_net() round (and existing rcu_barrier())
[1]
BUG: KASAN: slab-use-after-free in dst_destroy (net/core/dst.c:112) Read of size 8 at addr ffff8882137ccab0 by task swapper/37/0 Dec 03 05:46:18 kernel:
CPU: 37 UID: 0 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 6.12.0 #67 Hardware name: Red Hat KVM/RHEL, BIOS 1.16.1-1.el9 04/01/2014 Call Trace:
<IRQ> dump_stack_lvl (lib/dump_stack.c:124) print_address_description.constprop.0 (mm/kasan/report.c:378) ? dst_destroy (net/core/dst.c:112) print_report (mm/kasan/report.c:489) ? dst_destroy (net/core/dst.c:112) ? kasan_addr_to_slab (mm/kasan/common.c:37) kasan_report (mm/kasan/report.c:603) ? dst_destroy (net/core/dst.c:112) ? rcu_do_batch (kernel/rcu/tree.c:2567) dst_destroy (net/core/dst.c:112) rcu_do_batch (kernel/rcu/tree.c:2567) ? __pfx_rcu_do_batch (kernel/rcu/tree.c:2491) ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4339 kernel/locking/lockdep.c:4406) rcu_core (kernel/rcu/tree.c:2825) handle_softirqs (kernel/softirq.c:554)
__irq_exit_rcu (kernel/softirq.c:589 kernel/softirq.c:428 kernel/softirq.c:637) irq_exit_rcu (kernel/softirq.c:651) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1049 arch/x86/kernel/apic/apic.c:1049) </IRQ> <TASK> asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:702) RIP: 0010:default_idle (./arch/x86/include/asm/irqflags.h:37 ./arch/x86/include/asm/irqflags.h:92 arch/x86/kernel/process.c:743) Code: 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 6e ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 0f 00 2d c7 c9 27 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 RSP: 0018:ffff888100d2fe00 EFLAGS: 00000246 RAX: 00000000001870ed RBX: 1ffff110201a5fc2 RCX: ffffffffb61a3e46 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffb3d4d123 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed11c7e1835d R10: ffff888e3f0c1aeb R11: 0000000000000000 R12: 0000000000000000 R13: ffff888100d20000 R14: dffffc0000000000 R15: 0000000000000000 ? ct_kernel_exit.constprop.0 (kernel/context_tracking.c:148) ? cpuidle_idle_call (kernel/sched/idle.c:186) default_idle_call (./include/linux/cpuidle.h:143 kernel/sched/idle.c:118) cpuidle_idle_call (kernel/sched/idle.c:186) ? __pfx_cpuidle_idle_call (kernel/sched/idle.c:168) ? lock_release (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5848) ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4347 kernel/locking/lockdep.c:4406) ? tsc_verify_tsc_adjust (arch/x86/kernel/tsc_sync.c:59) do_idle (kernel/sched/idle.c:326) cpu_startup_entry (kernel/sched/idle.c:423 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:202 arch/x86/kernel/smpboot.c:282) ? __pfx_start_secondary (arch/x86/kernel/smpboot.c:232) ? soft_restart_cpu (arch/x86/kernel/head_64.S:452) common_startup_64 (arch/x86/kernel/head_64.S:414) </TASK> Dec 03 05:46:18 kernel:
Allocated by task 12184:
kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (./arch/x86/include/asm/current.h:49 mm/kasan/common.c:60 mm/kasan/common.c:69)
__kasan_slab_alloc (mm/kasan/common.c:319 mm/kasan/common.c:345) kmem_cache_alloc_noprof (mm/slub.c:4085 mm/slub.c:4134 mm/slub.c:4141) copy_net_ns (net/core/net_namespace.c:421 net/core/net_namespace.c:480) create_new_namespaces
---truncated---
CVE-2024-56657:
In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Avoid WARN() for symlink errors
Using WARN() for showing the error of symlink creations don't give more information than telling that something goes wrong, since the usual code path is a lregister callback from each control element creation. More badly, the use of WARN() rather confuses fuzzer as if it were serious issues.
This patch downgrades the warning messages to use the normal dev_err() instead of WARN(). For making it clearer, add the function name to the prefix, too.
CVE-2024-56655:
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not defer rule destruction via call_rcu
nf_tables_chain_destroy can sleep, it can't be used from call_rcu callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding, while transaction mutex is held and the to-be-desroyed rule was not exposed to either dataplane or dumps, as it deactives+frees without the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters of other chains/sets, see e.g. nft_lookup .deactivate callback, these must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard and way more intrusive. As-is, we can get:
WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x..
Workqueue: events nf_tables_trans_destroy_work RIP: 0010:nft_set_destroy+0x3fe/0x5c0 Call Trace:
<TASK> nf_tables_trans_destroy_work+0x6b7/0xad0 process_one_work+0x64a/0xce0 worker_thread+0x613/0x10d0
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain object, deactivate the rules + the chain and then defer the freeing to the nft destroy workqueue. We'd still need to keep the synchronize_rcu path as a fallback to handle -ENOMEM corner cases though.
CVE-2024-56654:
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating
The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference:
Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_.
For example, the following is **not** legal::
rcu_read_lock();
p = rcu_dereference(head.next);
rcu_read_unlock();
x = p->address; /* BUG!!! */ rcu_read_lock();
y = p->data; /* BUG!!! */ rcu_read_unlock();
CVE-2024-56653:
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: avoid UAF in btmtk_process_coredump
hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called.
================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82
CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace:
<TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK>
Allocated by task 82:
stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80
__kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30
Freed by task 1733:
stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0
____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30
The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28)
The buggy address belongs to the physical page:
page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ==================================================================
Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds.
CVE-2024-56651:
In the Linux kernel, the following vulnerability has been resolved:
can: hi311x: hi3110_can_ist(): fix potential use-after-free
The commit a22bd630cfff (can: hi311x: do not report txerr and rxerr during bus-off) removed the reporting of rxerr and txerr even in case of correct operation (i. e. not bus-off).
The error count information added to the CAN frame after netif_rx() is a potential use after free, since there is no guarantee that the skb is in the same state. It might be freed or reused.
Fix the issue by postponing the netif_rx() call in case of txerr and rxerr reporting.
CVE-2024-56650:
In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: fix LED ID check in led_tg_check()
Syzbot has reported the following BUG detected by KASAN:
BUG: KASAN: slab-out-of-bounds in strlen+0x58/0x70 Read of size 1 at addr ffff8881022da0c8 by task repro/5879 ...
Call Trace:
<TASK> dump_stack_lvl+0x241/0x360 ? __pfx_dump_stack_lvl+0x10/0x10 ? __pfx__printk+0x10/0x10 ? _printk+0xd5/0x120 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 print_report+0x169/0x550 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x183/0x530 ? __virt_addr_valid+0x45f/0x530 ? __phys_addr+0xba/0x170 ? strlen+0x58/0x70 kasan_report+0x143/0x180 ? strlen+0x58/0x70 strlen+0x58/0x70 kstrdup+0x20/0x80 led_tg_check+0x18b/0x3c0 xt_check_target+0x3bb/0xa40 ? __pfx_xt_check_target+0x10/0x10 ? stack_depot_save_flags+0x6e4/0x830 ? nft_target_init+0x174/0xc30 nft_target_init+0x82d/0xc30 ? __pfx_nft_target_init+0x10/0x10 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? rcu_is_watching+0x15/0xb0 ? nf_tables_newrule+0x1609/0x2980 ? nf_tables_newrule+0x1609/0x2980 ? __kmalloc_noprof+0x21a/0x400 nf_tables_newrule+0x1860/0x2980 ? __pfx_nf_tables_newrule+0x10/0x10 ? __nla_parse+0x40/0x60 nfnetlink_rcv+0x14e5/0x2ab0 ? __pfx_validate_chain+0x10/0x10 ? __pfx_nfnetlink_rcv+0x10/0x10 ? __lock_acquire+0x1384/0x2050 ? netlink_deliver_tap+0x2e/0x1b0 ? __pfx_lock_release+0x10/0x10 ? netlink_deliver_tap+0x2e/0x1b0 netlink_unicast+0x7f8/0x990 ? __pfx_netlink_unicast+0x10/0x10 ? __virt_addr_valid+0x183/0x530 ? __check_object_size+0x48e/0x900 netlink_sendmsg+0x8e4/0xcb0 ? __pfx_netlink_sendmsg+0x10/0x10 ? aa_sock_msg_perm+0x91/0x160 ? __pfx_netlink_sendmsg+0x10/0x10
__sock_sendmsg+0x223/0x270
____sys_sendmsg+0x52a/0x7e0 ? __pfx_____sys_sendmsg+0x10/0x10
__sys_sendmsg+0x292/0x380 ? __pfx___sys_sendmsg+0x10/0x10 ? lockdep_hardirqs_on_prepare+0x43d/0x780 ? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10 ? exc_page_fault+0x590/0x8c0 ? do_syscall_64+0xb6/0x230 do_syscall_64+0xf3/0x230 entry_SYSCALL_64_after_hwframe+0x77/0x7f ...
</TASK>
Since an invalid (without '\0' byte at all) byte sequence may be passed from userspace, add an extra check to ensure that such a sequence is rejected as possible ID and so never passed to 'kstrdup()' and further.
CVE-2024-56648:
In the Linux kernel, the following vulnerability has been resolved:
net: hsr: avoid potential out-of-bound access in fill_frame_info()
syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one.
Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case.
BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235
__netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606
__dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
__sys_sendto+0x594/0x750 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:726
__sys_sendto+0x594/0x750 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f
CVE-2024-56645:
In the Linux kernel, the following vulnerability has been resolved:
can: j1939: j1939_session_new(): fix skb reference counting
Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow.
[mkl: clean up commit message]
CVE-2024-56644:
In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: release expired exception dst cached in socket
Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur:
* an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created
* a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions
* after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst
When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object.
As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a (ipv6: give an IPv6 dev to blackhole_netdev):
unregister_netdevice: waiting for lo to become free. Usage count = 2
Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 (net: fix __dst_negative_advice() race). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f (ipv6: Don't drop cache route entry unless timer actually expired.) where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced.
The IPv4 version - ipv4_negative_advice() - is not affected by this bug.
When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst.
CVE-2024-56643:
In the Linux kernel, the following vulnerability has been resolved:
dccp: Fix memory leak in dccp_feat_change_recv
If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed.
Here is the kmemleak stack for this:
unreferenced object 0xffff88801d4ab488 (size 8):
comm syz-executor310, pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes):
01 b4 4a 1d 80 88 ff ff ..J.....
backtrace:
[<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1
Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
CVE-2024-56642:
In the Linux kernel, the following vulnerability has been resolved:
tipc: Fix use-after-free of kernel socket in cleanup_bearer().
syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1]
When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer().
tipc_net_stop() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free.
Let's move the decrement after releasing the socket in cleanup_bearer().
[0]:
ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0
__sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848
__tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898
____sys_sendmsg+0x500/0x830
[1]:
BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489
__sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
Uninit was created at:
slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244
CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer
CVE-2024-56641:
In the Linux kernel, the following vulnerability has been resolved:
net/smc: initialize close_work early to avoid warning
We encountered a warning that close_work was canceled before initialization.
WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0 Workqueue: events smc_lgr_terminate_work [smc] RIP: 0010:__flush_work+0x19e/0x1b0 Call Trace:
? __wake_up_common+0x7a/0x190 ? work_busy+0x80/0x80
__cancel_work_timer+0xe3/0x160 smc_close_cancel_work+0x1a/0x70 [smc] smc_close_active_abort+0x207/0x360 [smc]
__smc_lgr_terminate.part.38+0xc8/0x180 [smc] process_one_work+0x19e/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x117/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x22/0x30
This is because when smc_close_cancel_work is triggered, e.g. the RDMA driver is rmmod and the LGR is terminated, the conn->close_work is flushed before initialization, resulting in WARN_ON(!work->func).
__smc_lgr_terminate | smc_connect_{rdma|ism}
------------------------------------------------------------- | smc_conn_create | \- smc_lgr_register_conn for conn in lgr->conns_all | \- smc_conn_kill | \- smc_close_active_abort | \- smc_close_cancel_work | \- cancel_work_sync | \- __flush_work | (close_work) | | smc_close_init | \- INIT_WORK(&close_work)
So fix this by initializing close_work before establishing the connection.
CVE-2024-56640:
In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix LGR and link use-after-free issue
We encountered a LGR/link use-after-free issue, which manifested as the LGR/link refcnt reaching 0 early and entering the clear process, making resource access unsafe.
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 14 PID: 107447 at lib/refcount.c:25 refcount_warn_saturate+0x9c/0x140 Workqueue: events smc_lgr_terminate_work [smc] Call trace:
refcount_warn_saturate+0x9c/0x140
__smc_lgr_terminate.part.45+0x2a8/0x370 [smc] smc_lgr_terminate_work+0x28/0x30 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118
or
refcount_t: underflow; use-after-free.
WARNING: CPU: 6 PID: 93140 at lib/refcount.c:28 refcount_warn_saturate+0xf0/0x140 Workqueue: smc_hs_wq smc_listen_work [smc] Call trace:
refcount_warn_saturate+0xf0/0x140 smcr_link_put+0x1cc/0x1d8 [smc] smc_conn_free+0x110/0x1b0 [smc] smc_conn_abort+0x50/0x60 [smc] smc_listen_find_device+0x75c/0x790 [smc] smc_listen_work+0x368/0x8a0 [smc] process_one_work+0x1b8/0x420 worker_thread+0x158/0x510 kthread+0x114/0x118
It is caused by repeated release of LGR/link refcnt. One suspect is that smc_conn_free() is called repeatedly because some smc_conn_free() from server listening path are not protected by sock lock.
e.g.
Calls under socklock | smc_listen_work
------------------------------------------------------- lock_sock(sk) | smc_conn_abort smc_conn_free | \- smc_conn_free \- smcr_link_put | \- smcr_link_put (duplicated) release_sock(sk)
So here add sock lock protection in smc_listen_work() path, making it exclusive with other connection operations.
CVE-2024-56638:
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: incorrect percpu area handling under softirq
Softirq can interrupt ongoing packet from process context that is walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner header offsets to validate that the percpu area is valid for this skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff has already been parsed before for inner header fetching to register.
2) Validate that the percpu area refers to this skbuff using the skbuff pointer as a cookie. If there is a cookie mismatch, then this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the percpu area.
CVE-2024-56637:
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Hold module reference while requesting a module
User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call.
CVE-2024-56636:
In the Linux kernel, the following vulnerability has been resolved:
geneve: do not assume mac header is set in geneve_xmit_skb()
We should not assume mac header is set in output path.
Use skb_eth_hdr() instead of eth_hdr() to fix the issue.
sysbot reported the following :
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in:
CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline]
__dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
__sys_sendto+0x488/0x4f0 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f
CVE-2024-56635:
In the Linux kernel, the following vulnerability has been resolved:
net: avoid potential UAF in default_operstate()
syzbot reported an UAF in default_operstate() [1]
Issue is a race between device and netns dismantles.
After calling __rtnl_unlock() from netdev_run_todo(), we can not assume the netns of each device is still alive.
Make sure the device is not in NETREG_UNREGISTERED state, and add an ASSERT_RTNL() before the call to
__dev_get_by_index().
We might move this ASSERT_RTNL() in __dev_get_by_index() in the future.
[1]
BUG: KASAN: slab-use-after-free in __dev_get_by_index+0x5d/0x110 net/core/dev.c:852 Read of size 8 at addr ffff888043eba1b0 by task syz.0.0/5339
CPU: 0 UID: 0 PID: 5339 Comm: syz.0.0 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602
__dev_get_by_index+0x5d/0x110 net/core/dev.c:852 default_operstate net/core/link_watch.c:51 [inline] rfc2863_policy+0x224/0x300 net/core/link_watch.c:67 linkwatch_do_dev+0x3e/0x170 net/core/link_watch.c:170 netdev_run_todo+0x461/0x1000 net/core/dev.c:10894 rtnl_unlock net/core/rtnetlink.c:152 [inline] rtnl_net_unlock include/linux/rtnetlink.h:133 [inline] rtnl_dellink+0x760/0x8d0 net/core/rtnetlink.c:3520 rtnetlink_rcv_msg+0x791/0xcf0 net/core/rtnetlink.c:6911 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8e4/0xcb0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:726
____sys_sendmsg+0x52a/0x7e0 net/socket.c:2583
___sys_sendmsg net/socket.c:2637 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2a3cb80809 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2a3d9cd058 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2a3cd45fa0 RCX: 00007f2a3cb80809 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000008 RBP: 00007f2a3cbf393e R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f2a3cd45fa0 R15: 00007ffd03bc65c8 </TASK>
Allocated by task 5339:
kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kmalloc_array_noprof include/linux/slab.h:945 [inline] netdev_create_hash net/core/dev.c:11870 [inline] netdev_init+0x10c/0x250 net/core/dev.c:11890 ops_init+0x31e/0x590 net/core/net_namespace.c:138 setup_net+0x287/0x9e0 net/core/net_namespace.c:362 copy_net_ns+0x33f/0x570 net/core/net_namespace.c:500 create_new_namespaces+0x425/0x7b0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0x124/0x180 kernel/nsproxy.c:228 ksys_unshare+0x57d/0xa70 kernel/fork.c:3314
__do_sys_unshare kernel/fork.c:3385 [inline]
__se_sys_unshare kernel/fork.c:3383 [inline]
__x64_sys_unshare+0x38/0x40 kernel/fork.c:3383 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x8
---truncated---
CVE-2024-56633:
In the Linux kernel, the following vulnerability has been resolved:
tcp_bpf: Fix the sk_mem_uncharge logic in tcp_bpf_sendmsg
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging tosend bytes, which is either msg->sg.size or a smaller value apply_bytes.
Potential problems with this strategy are as follows:
- If the actual sent bytes are smaller than tosend, we need to charge some bytes back, as in line 487, which is okay but seems not clean.
- When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may miss uncharging (msg->sg.size - apply_bytes) bytes.
[...] 415 tosend = msg->sg.size;
416 if (psock->apply_bytes && psock->apply_bytes < tosend) 417 tosend = psock->apply_bytes;
[...] 443 sk_msg_return(sk, msg, tosend);
444 release_sock(sk);
446 origsize = msg->sg.size;
447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress, 448 msg, tosend, flags);
449 sent = origsize - msg->sg.size;
[...] 454 lock_sock(sk);
455 if (unlikely(ret < 0)) { 456 int free = sk_msg_free_nocharge(sk, msg);
458 if (!cork) 459 *copied -= free;
460 } [...] 487 if (eval == __SK_REDIRECT) 488 sk_mem_charge(sk, tosend - sent);
[...]
When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply, the following warning will be reported:
------------[ cut here ]------------ WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0 Modules linked in:
CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events sk_psock_destroy RIP: 0010:inet_sock_destruct+0x190/0x1a0 RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206 RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800 RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900 RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0 R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400 R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100 FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace:
<TASK> ? __warn+0x89/0x130 ? inet_sock_destruct+0x190/0x1a0 ? report_bug+0xfc/0x1e0 ? handle_bug+0x5c/0xa0 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x190/0x1a0
__sk_destruct+0x25/0x220 sk_psock_destroy+0x2b2/0x310 process_scheduled_works+0xa3/0x3e0 worker_thread+0x117/0x240 ? __pfx_worker_thread+0x10/0x10 kthread+0xcf/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK>
---[ end trace 0000000000000000 ]---
In __SK_REDIRECT, a more concise way is delaying the uncharging after sent bytes are finalized, and uncharge this value. When (ret < 0), we shall invoke sk_msg_free.
Same thing happens in case __SK_DROP, when tosend is set to apply_bytes, we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same warning will be reported in selftest.
[...] 468 case __SK_DROP:
469 default:
470 sk_msg_free_partial(sk, msg, tosend);
471 sk_msg_apply_bytes(psock, tosend);
472 *copied -= (tosend + delta);
473 return -EACCES;
[...]
So instead of sk_msg_free_partial we can do sk_msg_free here.
CVE-2024-56631:
In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Fix slab-use-after-free read in sg_release()
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN:
BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838
__mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407
In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp.
After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error.
Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures:
- No references to sfp or sdp occur after the reference count is decremented.
- Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release().
The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release().
CVE-2024-56629:
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix when get product name maybe null pointer
Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes.
This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard.
Kernel logs:
[ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]:
[ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0
---truncated---
CVE-2024-56628:
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Add architecture specific huge_pte_clear()
When executing mm selftests run_vmtests.sh, there is such an error:
BUG: Bad page state in process uffd-unit-tests pfn:00000 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 flags: 0xffff0000002000(reserved|node=0|zone=0|lastcpupid=0xffff) raw: 00ffff0000002000 ffffbf0000000008 ffffbf0000000008 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set Modules linked in: snd_seq_dummy snd_seq snd_seq_device rfkill vfat fat virtio_balloon efi_pstore virtio_net pstore net_failover failover fuse nfnetlink virtio_scsi virtio_gpu virtio_dma_buf dm_multipath efivarfs CPU: 2 UID: 0 PID: 1913 Comm: uffd-unit-tests Not tainted 6.12.0 #184 Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 Stack : 900000047c8ac000 0000000000000000 9000000000223a7c 900000047c8ac000 900000047c8af690 900000047c8af698 0000000000000000 900000047c8af7d8 900000047c8af7d0 900000047c8af7d0 900000047c8af5b0 0000000000000001 0000000000000001 900000047c8af698 10b3c7d53da40d26 0000010000000000 0000000000000022 0000000fffffffff fffffffffe000000 ffff800000000000 000000000000002f 0000800000000000 000000017a6d4000 90000000028f8940 0000000000000000 0000000000000000 90000000025aa5e0 9000000002905000 0000000000000000 90000000028f8940 ffff800000000000 0000000000000000 0000000000000000 0000000000000000 9000000000223a94 000000012001839c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ...
Call Trace:
[<9000000000223a94>] show_stack+0x5c/0x180 [<9000000001c3fd64>] dump_stack_lvl+0x6c/0xa0 [<900000000056aa08>] bad_page+0x1a0/0x1f0 [<9000000000574978>] free_unref_folios+0xbf0/0xd20 [<90000000004e65cc>] folios_put_refs+0x1a4/0x2b8 [<9000000000599a0c>] free_pages_and_swap_cache+0x164/0x260 [<9000000000547698>] tlb_batch_pages_flush+0xa8/0x1c0 [<9000000000547f30>] tlb_finish_mmu+0xa8/0x218 [<9000000000543cb8>] exit_mmap+0x1a0/0x360 [<9000000000247658>] __mmput+0x78/0x200 [<900000000025583c>] do_exit+0x43c/0xde8 [<9000000000256490>] do_group_exit+0x68/0x110 [<9000000000256554>] sys_exit_group+0x1c/0x20 [<9000000001c413b4>] do_syscall+0x94/0x130 [<90000000002216d8>] handle_syscall+0xb8/0x158 Disabling lock debugging due to kernel taint BUG: non-zero pgtables_bytes on freeing mm: -16384
On LoongArch system, invalid huge pte entry should be invalid_pte_table or a single _PAGE_HUGE bit rather than a zero value. And it should be the same with invalid pmd entry, since pmd_none() is called by function free_pgd_range() and pmd_none() return 0 by huge_pte_clear(). So single
_PAGE_HUGE bit is also treated as a valid pte table and free_pte_range() will be called in free_pmd_range().
free_pmd_range() pmd = pmd_offset(pud, addr);
do { next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd)) continue;
free_pte_range(tlb, pmd, addr);
} while (pmd++, addr = next, addr != end);
Here invalid_pte_table is used for both invalid huge pte entry and pmd entry.
CVE-2024-56627:
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix Out-of-Bounds Read in ksmbd_vfs_stream_read
An offset from client could be a negative value, It could lead to an out-of-bounds read from the stream_buf.
Note that this issue is coming when setting 'vfs objects = streams_xattr parameter' in ksmbd.conf.
CVE-2024-56625:
In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_set_termination(): allow sleeping GPIOs
In commit 6e86a1543c37 (can: dev: provide optional GPIO based termination support) GPIO based termination support was added.
For no particular reason that patch uses gpiod_set_value() to set the GPIO. This leads to the following warning, if the systems uses a sleeping GPIO, i.e. behind an I2C port expander:
| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c
Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the use of sleeping GPIOs.
CVE-2024-56623:
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use after free on unload
System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop).
On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free.
Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread.
[596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360
...
[596663.813008] Call Trace:
[596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]
CVE-2024-56622:
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: sysfs: Prevent div by zero
Prevent a division by 0 when monitoring is not enabled.
CVE-2024-56619:
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
Syzbot reported that when searching for records in a directory where the inode's i_size is corrupted and has a large value, memory access outside the folio/page range may occur, or a use-after-free bug may be detected if KASAN is enabled.
This is because nilfs_last_byte(), which is called by nilfs_find_entry() and others to calculate the number of valid bytes of directory data in a page from i_size and the page index, loses the upper 32 bits of the 64-bit size information due to an inappropriate type of local variable to which the i_size value is assigned.
This caused a large byte offset value due to underflow in the end address calculation in the calling nilfs_find_entry(), resulting in memory access that exceeds the folio/page size.
Fix this issue by changing the type of the local variable causing the bit loss from unsigned int to u64. The return value of nilfs_last_byte() is also of type unsigned int, but it is truncated so as not to exceed PAGE_SIZE and no bit loss occurs, so no change is required.
CVE-2024-56617:
In the Linux kernel, the following vulnerability has been resolved:
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
Commit
5944ce092b97 (arch_topology: Build cacheinfo from primary CPU)
adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit
6539cffa9495 (cacheinfo: Add arch specific early level initializer)
lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed.
If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier.
Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
CVE-2024-56616:
In the Linux kernel, the following vulnerability has been resolved:
drm/dp_mst: Fix MST sideband message body length check
Fix the MST sideband message body length check, which must be at least 1 byte accounting for the message body CRC (aka message data CRC) at the end of the message.
This fixes a case where an MST branch device returns a header with a correct header CRC (indicating a correctly received body length), with the body length being incorrectly set to 0. This will later lead to a memory corruption in drm_dp_sideband_append_payload() and the following errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25 index -1 is out of range for type 'u8 [48]' Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field &msg->msg[msg->curlen] at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256) Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper] drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper] drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
CVE-2024-56615:
In the Linux kernel, the following vulnerability has been resolved:
bpf: fix OOB devmap writes when deleting elements
Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed.
When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32.
Example splat below:
[ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ #487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace:
[ 160.879338] <TASK> [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482] </TASK>
CVE-2024-56614:
In the Linux kernel, the following vulnerability has been resolved:
xsk: fix OOB map writes when deleting elements
Jordy says:
In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check:
if (k >= map->max_entries) return -EINVAL;
This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access.
spin_lock_bh(&m->lock);
map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry);
spin_unlock_bh(&m->lock);
The xchg operation can then be used to cause an out-of-bounds write.
Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption.
It indeed results in following splat:
[76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace:
[76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00
---truncated---
CVE-2024-56613:
In the Linux kernel, the following vulnerability has been resolved:
sched/numa: fix memory leak due to the overwritten vma->numab_state
[Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak.
# /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks.
# dmesg | grep kmemleak ...
kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64):
comm hackbench, pid 17142, jiffies 4299780315 hex dump (first 32 bytes):
ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc bff18fd4):
[<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0 [<ffffffff8113f715>] task_numa_work+0x725/0xa00 [<ffffffff8110f878>] task_work_run+0x58/0x90 [<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0 [<ffffffff81dd78d5>] do_syscall_64+0x85/0x150 [<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e ...
This issue can be consistently reproduced on three different servers:
* a 448-core server
* a 256-core server
* a 192-core server
[Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten.
Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1].
Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs.
[Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment.
[1] https://lore.kernel.org/lkml/[email protected]/
Tenable has extracted the preceding description block directly from the Tencent Linux security advisory.
Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.
Solution
Update the affected packages.See Also
https://mirrors.tencent.com/tlinux/errata/tssa-20250113.xml
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-46772
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-50017
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-50018
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57882
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57876
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57874
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57850
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57849
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57843
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57841
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57838
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57807
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57802
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57801
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57798
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-57791
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56787
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56786
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56783
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56780
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56778
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56777
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56776
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56774
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56770
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56769
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56763
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56760
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56756
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56755
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56752
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56751
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56748
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56747
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56745
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56744
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56741
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56739
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56729
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56724
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56722
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56720
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56719
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56718
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56716
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56715
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56710
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56709
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56708
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56705
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56701
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56693
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56692
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56690
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56688
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56687
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56678
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56677
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56675
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56672
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56667
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56665
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56664
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56663
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56662
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56661
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56660
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56659
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56658
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56657
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56655
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56654
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56653
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56651
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56650
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56648
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56645
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56644
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56643
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56642
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56641
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56640
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56638
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56637
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56636
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56635
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56633
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56631
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56629
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56628
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56627
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56625
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56623
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56622
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56619
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56617
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56616
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56615
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56614
https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2024-56613
Plugin Details
Severity: High
ID: 239178
File Name: tencentos_TSSA_2025_0113.nasl
Version: 1.1
Type: local
Family: Tencent Local Security Checks
Published: 6/16/2025
Updated: 6/16/2025
Supported Sensors: Nessus
Vulnerability Information
CPE: p-cpe:/a:tencent:tencentos_server:kernel, cpe:/o:tencent:tencentos_server:4
Required KB Items: Host/local_checks_enabled, Host/cpu, Host/etc/os-release, Host/TencentOS/rpm-list
Exploit Ease: No known exploits are available
Patch Publication Date: 3/12/2025
Vulnerability Publication Date: 3/12/2025