| CVE-2026-31456 | In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix race between concurrent split and refault The splitting of a PUD entry in walk_pud_range() can race with a concurrent thread refaulting the PUD leaf entry causing it to try walking a PMD range that has disappeared. An example and reproduction of this is to try reading numa_maps of a process while VFIO-PCI is setting up DMA (specifically the vfio_pin_pages_remote call) on a large BAR for that process. This will trigger a kernel BUG: vfio-pci 0000:03:00.0: enabling device (0000 -> 0002) BUG: unable to handle page fault for address: ffffa23980000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI ... RIP: 0010:walk_pgd_range+0x3b5/0x7a0 Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24 28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06 9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74 RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287 RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0 RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000 R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000 R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000 FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __walk_page_range+0x195/0x1b0 walk_page_vma+0x62/0xc0 show_numa_map+0x12b/0x3b0 seq_read_iter+0x297/0x440 seq_read+0x11d/0x140 vfs_read+0xc2/0x340 ksys_read+0x5f/0xe0 do_syscall_64+0x68/0x130 ? get_page_from_freelist+0x5c2/0x17e0 ? mas_store_prealloc+0x17e/0x360 ? vma_set_page_prot+0x4c/0xa0 ? __alloc_pages_noprof+0x14e/0x2d0 ? __mod_memcg_lruvec_state+0x8d/0x140 ? __lruvec_stat_mod_folio+0x76/0xb0 ? __folio_mod_stat+0x26/0x80 ? do_anonymous_page+0x705/0x900 ? __handle_mm_fault+0xa8d/0x1000 ? __count_memcg_events+0x53/0xf0 ? handle_mm_fault+0xa5/0x360 ? do_user_addr_fault+0x342/0x640 ? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0 ? irqentry_exit_to_user_mode+0x24/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fe88464f47e Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f 84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28 RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003 RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000 R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 </TASK> Fix this by validating the PUD entry in walk_pmd_range() using a stable snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the walk via ACTION_AGAIN instead of descending further. This mirrors the retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the PTE is not being got by pte_offset_map_lock(). | medium | 2026-04-23 |
| CVE-2026-31455 | In the Linux kernel, the following vulnerability has been resolved: xfs: stop reclaim before pushing AIL during unmount The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while background reclaim and inodegc are still running. This is broken independently of any use-after-free issues - background reclaim and inodegc should not be running while the AIL is being pushed during unmount, as inodegc can dirty and insert inodes into the AIL during the flush, and background reclaim can race to abort and free dirty inodes. Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background reclaim before pushing the AIL. Stop inodegc before cancelling m_reclaim_work because the inodegc worker can re-queue m_reclaim_work via xfs_inodegc_set_reclaimable. | high | 2026-04-23 |
| CVE-2026-31454 | In the Linux kernel, the following vulnerability has been resolved: xfs: save ailp before dropping the AIL lock in push callbacks In xfs_inode_item_push() and xfs_qm_dquot_logitem_push(), the AIL lock is dropped to perform buffer IO. Once the cluster buffer no longer protects the log item from reclaim, the log item may be freed by background reclaim or the dquot shrinker. The subsequent spin_lock() call dereferences lip->li_ailp, which is a use-after-free. Fix this by saving the ailp pointer in a local variable while the AIL lock is held and the log item is guaranteed to be valid. | high | 2026-04-27 |
| CVE-2026-31453 | In the Linux kernel, the following vulnerability has been resolved: xfs: avoid dereferencing log items after push callbacks After xfsaild_push_item() calls iop_push(), the log item may have been freed if the AIL lock was dropped during the push. Background inode reclaim or the dquot shrinker can free the log item while the AIL lock is not held, and the tracepoints in the switch statement dereference the log item after iop_push() returns. Fix this by capturing the log item type, flags, and LSN before calling xfsaild_push_item(), and introducing a new xfs_ail_push_class trace event class that takes these pre-captured values and the ailp pointer instead of the log item pointer. | high | 2026-04-27 |
| CVE-2026-31452 | In the Linux kernel, the following vulnerability has been resolved: ext4: convert inline data to extents when truncate exceeds inline size Add a check in ext4_setattr() to convert files from inline data storage to extent-based storage when truncate() grows the file size beyond the inline capacity. This prevents the filesystem from entering an inconsistent state where the inline data flag is set but the file size exceeds what can be stored inline. Without this fix, the following sequence causes a kernel BUG_ON(): 1. Mount filesystem with inode that has inline flag set and small size 2. truncate(file, 50MB) - grows size but inline flag remains set 3. sendfile() attempts to write data 4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity) The crash occurs because ext4_write_inline_data() expects inline storage to accommodate the write, but the actual inline capacity (~60 bytes for i_block + ~96 bytes for xattrs) is far smaller than the file size and write request. The fix checks if the new size from setattr exceeds the inode's actual inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to extent-based storage before proceeding with the size change. This addresses the root cause by ensuring the inline data flag and file size remain consistent during truncate operations. | high | 2026-04-23 |
| CVE-2026-31451 | In the Linux kernel, the following vulnerability has been resolved: ext4: replace BUG_ON with proper error handling in ext4_read_inline_folio Replace BUG_ON() with proper error handling when inline data size exceeds PAGE_SIZE. This prevents kernel panic and allows the system to continue running while properly reporting the filesystem corruption. The error is logged via ext4_error_inode(), the buffer head is released to prevent memory leak, and -EFSCORRUPTED is returned to indicate filesystem corruption. | medium | 2026-04-23 |
| CVE-2026-31450 | In the Linux kernel, the following vulnerability has been resolved: ext4: publish jinode after initialization ext4_inode_attach_jinode() publishes ei->jinode to concurrent users. It used to set ei->jinode before jbd2_journal_init_jbd_inode(), allowing a reader to observe a non-NULL jinode with i_vfs_inode still unset. The fast commit flush path can then pass this jinode to jbd2_wait_inode_data(), which dereferences i_vfs_inode->i_mapping and may crash. Below is the crash I observe: ``` BUG: unable to handle page fault for address: 000000010beb47f4 PGD 110e51067 P4D 110e51067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 4850 Comm: fc_fsync_bench_ Not tainted 6.18.0-00764-g795a690c06a5 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 RIP: 0010:xas_find_marked+0x3d/0x2e0 Code: e0 03 48 83 f8 02 0f 84 f0 01 00 00 48 8b 47 08 48 89 c3 48 39 c6 0f 82 fd 01 00 00 48 85 c9 74 3d 48 83 f9 03 77 63 4c 8b 0f <49> 8b 71 08 48 c7 47 18 00 00 00 00 48 89 f1 83 e1 03 48 83 f9 02 RSP: 0018:ffffbbee806e7bf0 EFLAGS: 00010246 RAX: 000000000010beb4 RBX: 000000000010beb4 RCX: 0000000000000003 RDX: 0000000000000001 RSI: 0000002000300000 RDI: ffffbbee806e7c10 RBP: 0000000000000001 R08: 0000002000300000 R09: 000000010beb47ec R10: ffff9ea494590090 R11: 0000000000000000 R12: 0000002000300000 R13: ffffbbee806e7c90 R14: ffff9ea494513788 R15: ffffbbee806e7c88 FS: 00007fc2f9e3e6c0(0000) GS:ffff9ea6b1444000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000010beb47f4 CR3: 0000000119ac5000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> filemap_get_folios_tag+0x87/0x2a0 __filemap_fdatawait_range+0x5f/0xd0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __schedule+0x3e7/0x10c0 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? cap_safe_nice+0x37/0x70 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 filemap_fdatawait_range_keep_errors+0x12/0x40 ext4_fc_commit+0x697/0x8b0 ? ext4_file_write_iter+0x64b/0x950 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ? srso_alias_return_thunk+0x5/0xfbef5 ? vfs_write+0x356/0x480 ? srso_alias_return_thunk+0x5/0xfbef5 ? preempt_count_sub+0x5f/0x80 ext4_sync_file+0xf7/0x370 do_fsync+0x3b/0x80 ? syscall_trace_enter+0x108/0x1d0 __x64_sys_fdatasync+0x16/0x20 do_syscall_64+0x62/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... ``` Fix this by initializing the jbd2_inode first. Use smp_wmb() and WRITE_ONCE() to publish ei->jinode after initialization. Readers use READ_ONCE() to fetch the pointer. | high | 2026-04-27 |
| CVE-2026-31449 | In the Linux kernel, the following vulnerability has been resolved: ext4: validate p_idx bounds in ext4_ext_correct_indexes ext4_ext_correct_indexes() walks up the extent tree correcting index entries when the first extent in a leaf is modified. Before accessing path[k].p_idx->ei_block, there is no validation that p_idx falls within the valid range of index entries for that level. If the on-disk extent header contains a corrupted or crafted eh_entries value, p_idx can point past the end of the allocated buffer, causing a slab-out-of-bounds read. Fix this by validating path[k].p_idx against EXT_LAST_INDEX() at both access sites: before the while loop and inside it. Return -EFSCORRUPTED if the index pointer is out of range, consistent with how other bounds violations are handled in the ext4 extent tree code. | high | 2026-04-27 |
| CVE-2026-31448 | In the Linux kernel, the following vulnerability has been resolved: ext4: avoid infinite loops caused by residual data On the mkdir/mknod path, when mapping logical blocks to physical blocks, if inserting a new extent into the extent tree fails (in this example, because the file system disabled the huge file feature when marking the inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to reclaim the physical block without deleting the corresponding data in the extent tree. This causes subsequent mkdir operations to reference the previously reclaimed physical block number again, even though this physical block is already being used by the xattr block. Therefore, a situation arises where both the directory and xattr are using the same buffer head block in memory simultaneously. The above causes ext4_xattr_block_set() to enter an infinite loop about "inserted" and cannot release the inode lock, ultimately leading to the 143s blocking problem mentioned in [1]. If the metadata is corrupted, then trying to remove some extent space can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE was passed, remove space wrongly update quota information. Jan Kara suggests distinguishing between two cases: 1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully consistent and we must maintain its consistency including all the accounting. However these errors can happen only early before we've inserted the extent into the extent tree. So current code works correctly for this case. 2) Some other error - this means metadata is corrupted. We should strive to do as few modifications as possible to limit damage. So I'd just skip freeing of allocated blocks. [1] INFO: task syz.0.17:5995 blocked for more than 143 seconds. Call Trace: inode_lock_nested include/linux/fs.h:1073 [inline] __start_dirop fs/namei.c:2923 [inline] start_dirop fs/namei.c:2934 [inline] | critical | 2026-04-27 |
| CVE-2026-31447 | In the Linux kernel, the following vulnerability has been resolved: ext4: reject mount if bigalloc with s_first_data_block != 0 bigalloc with s_first_data_block != 0 is not supported, reject mounting it. | high | 2026-04-27 |
| CVE-2026-31446 | In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in update_super_work when racing with umount Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups reads during unmount. However, this introduced a use-after-free because update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which accesses the kobject's kernfs_node after it has been freed by kobject_del() in ext4_unregister_sysfs(): update_super_work ext4_put_super ----------------- -------------- ext4_unregister_sysfs(sb) kobject_del(&sbi->s_kobj) __kobject_del() sysfs_remove_dir() kobj->sd = NULL sysfs_put(sd) kernfs_put() // RCU free ext4_notify_error_sysfs(sbi) sysfs_notify(&sbi->s_kobj) kn = kobj->sd // stale pointer kernfs_get(kn) // UAF on freed kernfs_node ext4_journal_destroy() flush_work(&sbi->s_sb_upd_work) Instead of reordering the teardown sequence, fix this by making ext4_notify_error_sysfs() detect that sysfs has already been torn down by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call in that case. A dedicated mutex (s_error_notify_mutex) serializes ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs() to prevent TOCTOU races where the kobject could be deleted between the state_in_sysfs check and the sysfs_notify() call. | high | 2026-04-27 |
| CVE-2026-31445 | In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid use of half-online-committed context One major usage of damon_call() is online DAMON parameters update. It is done by calling damon_commit_ctx() inside the damon_call() callback function. damon_commit_ctx() can fail for two reasons: 1) invalid parameters and 2) internal memory allocation failures. In case of failures, the damon_ctx that attempted to be updated (commit destination) can be partially updated (or, corrupted from a perspective), and therefore shouldn't be used anymore. The function only ensures the damon_ctx object can safely deallocated using damon_destroy_ctx(). The API callers are, however, calling damon_commit_ctx() only after asserting the parameters are valid, to avoid damon_commit_ctx() fails due to invalid input parameters. But it can still theoretically fail if the internal memory allocation fails. In the case, DAMON may run with the partially updated damon_ctx. This can result in unexpected behaviors including even NULL pointer dereference in case of damos_commit_dests() failure [1]. Such allocation failure is arguably too small to fail, so the real world impact would be rare. But, given the bad consequence, this needs to be fixed. Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving the damon_commit_ctx() failure on the damon_ctx object. For this, introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it when it is failed. kdamond_call() checks if the field is set after each damon_call_control->fn() is executed. If it is set, ignore remaining callback requests and return. All kdamond_call() callers including kdamond_fn() also check the maybe_corrupted field right after kdamond_call() invocations. If the field is set, break the kdamond_fn() main loop so that DAMON sill doesn't use the context that might be corrupted. [[email protected]: let kdamond_call() with cancel regardless of maybe_corrupted] | medium | 2026-04-23 |
| CVE-2026-31444 | In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free and NULL deref in smb_grant_oplock() smb_grant_oplock() has two issues in the oplock publication sequence: 1) opinfo is linked into ci->m_op_list (via opinfo_add) before add_lease_global_list() is called. If add_lease_global_list() fails (kmalloc returns NULL), the error path frees the opinfo via __free_opinfo() while it is still linked in ci->m_op_list. Concurrent m_op_list readers (opinfo_get_list, or direct iteration in smb_break_all_levII_oplock) dereference the freed node. 2) opinfo->o_fp is assigned after add_lease_global_list() publishes the opinfo on the global lease list. A concurrent find_same_lease_key() can walk the lease list and dereference opinfo->o_fp->f_ci while o_fp is still NULL. Fix by restructuring the publication sequence to eliminate post-publish failure: - Set opinfo->o_fp before any list publication (fixes NULL deref). - Preallocate lease_table via alloc_lease_table() before opinfo_add() so add_lease_global_list() becomes infallible after publication. - Keep the original m_op_list publication order (opinfo_add before lease list) so concurrent opens via same_client_has_lease() and opinfo_get_list() still see the in-flight grant. - Use opinfo_put() instead of __free_opinfo() on err_out so that the RCU-deferred free path is used. This also requires splitting add_lease_global_list() to take a preallocated lease_table and changing its return type from int to void, since it can no longer fail. | critical | 2026-04-27 |
| CVE-2026-31443 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix crash when the event log is disabled If reporting errors to the event log is not supported by the hardware, and an error that causes Function Level Reset (FLR) is received, the driver will try to restore the event log even if it was not allocated. Also, only try to free the event log if it was properly allocated. | medium | 2026-04-23 |
| CVE-2026-31442 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix possible invalid memory access after FLR In the case that the first Function Level Reset (FLR) concludes correctly, but in the second FLR the scratch area for the saved configuration cannot be allocated, it's possible for a invalid memory access to happen. Always set the deallocated scratch area to NULL after FLR completes. | high | 2026-04-27 |
| CVE-2026-31441 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix memory leak when a wq is reset idxd_wq_disable_cleanup() which is called from the reset path for a workqueue, sets the wq type to NONE, which for other parts of the driver mean that the wq is empty (all its resources were released). Only set the wq type to NONE after its resources are released. | medium | 2026-04-23 |
| CVE-2026-31440 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix leaking event log memory During the device remove process, the device is reset, causing the configuration registers to go back to their default state, which is zero. As the driver is checking if the event log support was enabled before deallocating, it will fail if a reset happened before. Do not check if the support was enabled, the check for 'idxd->evl' being valid (only allocated if the HW capability is available) is enough. | medium | 2026-04-23 |
| CVE-2026-31439 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap init error handling devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL. Fix the error check and also fix the error message. Use the error code from ERR_PTR() instead of the wrong value in ret. | medium | 2026-04-23 |
| CVE-2026-31438 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators When a process crashes and the kernel writes a core dump to a 9P filesystem, __kernel_write() creates an ITER_KVEC iterator. This iterator reaches netfs_limit_iter() via netfs_unbuffered_write(), which only handles ITER_FOLIOQ, ITER_BVEC and ITER_XARRAY iterator types, hitting the BUG() for any other type. Fix this by adding netfs_limit_kvec() following the same pattern as netfs_limit_bvec(), since both kvec and bvec are simple segment arrays with pointer and length fields. Dispatch it from netfs_limit_iter() when the iterator type is ITER_KVEC. | medium | 2026-04-23 |
| CVE-2026-31437 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry When a write subrequest is marked NETFS_SREQ_NEED_RETRY, the retry path in netfs_unbuffered_write() unconditionally calls stream->prepare_write() without checking if it is NULL. Filesystems such as 9P do not set the prepare_write operation, so stream->prepare_write remains NULL. When get_user_pages() fails with -EFAULT and the subrequest is flagged for retry, this results in a NULL pointer dereference at fs/netfs/direct_write.c:189. Fix this by mirroring the pattern already used in write_retry.c: if stream->prepare_write is NULL, skip renegotiation and directly reissue the subrequest via netfs_reissue_write(), which handles iterator reset, IN_PROGRESS flag, stats update and reissue internally. | medium | 2026-04-23 |
| CVE-2026-31436 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix possible wrong descriptor completion in llist_abort_desc() At the end of this function, d is the traversal cursor of flist, but the code completes found instead. This can lead to issues such as NULL pointer dereferences, double completion, or descriptor leaks. Fix this by completing d instead of found in the final list_for_each_entry_safe() loop. | critical | 2026-04-27 |
| CVE-2026-31435 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix read abandonment during retry Under certain circumstances, all the remaining subrequests from a read request will get abandoned during retry. The abandonment process expects the 'subreq' variable to be set to the place to start abandonment from, but it doesn't always have a useful value (it will be uninitialised on the first pass through the loop and it may point to a deleted subrequest on later passes). Fix the first jump to "abandon:" to set subreq to the start of the first subrequest expected to need retry (which, in this abandonment case, turned out unexpectedly to no longer have NEED_RETRY set). Also clear the subreq pointer after discarding superfluous retryable subrequests to cause an oops if we do try to access it. | high | 2026-04-27 |
| CVE-2026-31434 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix leak of kobject name for sub-group space_info When create_space_info_sub_group() allocates elements of space_info->sub_group[], kobject_init_and_add() is called for each element via btrfs_sysfs_add_space_info_type(). However, when check_removing_space_info() frees these elements, it does not call btrfs_sysfs_remove_space_info() on them. As a result, kobject_put() is not called and the associated kobj->name objects are leaked. This memory leak is reproduced by running the blktests test case zbd/009 on kernels built with CONFIG_DEBUG_KMEMLEAK. The kmemleak feature reports the following error: unreferenced object 0xffff888112877d40 (size 16): comm "mount", pid 1244, jiffies 4294996972 hex dump (first 16 bytes): 64 61 74 61 2d 72 65 6c 6f 63 00 c4 c6 a7 cb 7f data-reloc...... backtrace (crc 53ffde4d): __kmalloc_node_track_caller_noprof+0x619/0x870 kstrdup+0x42/0xc0 kobject_set_name_vargs+0x44/0x110 kobject_init_and_add+0xcf/0x150 btrfs_sysfs_add_space_info_type+0xfc/0x210 [btrfs] create_space_info_sub_group.constprop.0+0xfb/0x1b0 [btrfs] create_space_info+0x211/0x320 [btrfs] btrfs_init_space_info+0x15a/0x1b0 [btrfs] open_ctree+0x33c7/0x4a50 [btrfs] btrfs_get_tree.cold+0x9f/0x1ee [btrfs] vfs_get_tree+0x87/0x2f0 vfs_cmd_create+0xbd/0x280 __do_sys_fsconfig+0x3df/0x990 do_syscall_64+0x136/0x1540 entry_SYSCALL_64_after_hwframe+0x76/0x7e To avoid the leak, call btrfs_sysfs_remove_space_info() instead of kfree() for the elements. | high | 2026-04-23 |
| CVE-2026-31192 | Insufficient validation of Chrome extension identifiers in Raindrop.io Bookmark Manager Web App 5.6.76.0 allows attackers to obtain sensitive user data via a crafted request. | medium | 2026-04-22 |
| CVE-2026-0539 | Incorrect Default Permissions in pcvisit service binary on Windows allows a low-privileged local attacker to escalate their privileges by overwriting the service binary with arbitrary contents. This service binary is automatically launched with NT\SYSTEM privileges on boot. This issue affects all versions after 22.6.22.1329 and was fixed in 25.12.3.1745. | high | 2026-04-22 |
| CVE-2014-125120 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2013-10056 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2013-10045 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2013-10041 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2011-10031 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2010-20124 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2010-20118 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2010-20117 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2010-20116 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2010-20110 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2009-20012 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2008-20003 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2008-20002 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2005-20001 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2000-5001 | Rejected reason: This CVE has the been REJECTED and will not be published by the CNA. | No Score | 2026-04-22 |
| CVE-2026-6857 | A flaw was found in camel-infinispan. This vulnerability involves unsafe deserialization in the ProtoStream remote aggregation repository. A remote attacker with low privileges could exploit this by sending specially crafted data, leading to arbitrary code execution. This allows the attacker to gain full control over the affected system, impacting its confidentiality, integrity, and availability. | high | 2026-04-22 |
| CVE-2026-6855 | A flaw was found in InstructLab. A local attacker could exploit a path traversal vulnerability in the chat session handler by manipulating the `logs_dir` parameter. This allows the attacker to create new directories and write files to arbitrary locations on the system, potentially leading to unauthorized data modification or disclosure. | high | 2026-04-22 |
| CVE-2026-6848 | A flaw was found in Red Hat Quay. When Red Hat Quay requests password re-verification for sensitive operations, such as token generation or robot account creation, the re-authentication prompt can be bypassed. This allows a user with a timed-out session, or an attacker with access to an idle authenticated browser session, to perform privileged actions without providing valid credentials. The vulnerability enables unauthorized execution of sensitive operations despite the user interface displaying an error for invalid credentials. | medium | 2026-04-22 |
| CVE-2026-33601 | If you use the zoneToCache function with a malicious authoritative server, an attacker can send a zone that result in a null pointer dereference, caused by a missing consistency check and leading to a denial of service. | medium | 2026-04-27 |
| CVE-2026-33600 | An RPZ sent by a malicious authoritative server can result in a null pointer dereference, caused by a missing consistency check and leading to a denial of service. | medium | 2026-04-27 |
| CVE-2026-33262 | An attacker can send replies that result in a null pointer dereference, caused by a missing consistency check and leading to a denial of service. Cookies are disabled by default. | medium | 2026-04-27 |
| CVE-2026-33261 | A zone transition from NSEC to NSEC3 might trigger an internal inconsistency and cause a denial of service. | medium | 2026-04-27 |
| CVE-2026-33260 | An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default. | high | 2026-04-27 |
| CVE-2026-33259 | Having many concurrent transfers of the same RPZ can lead to inconsistent RPZ data, use after free and/or a crash of the recursor. Normally concurrent transfers of the same RPZ zone can only occur with a malfunctioning RPZ provider. | medium | 2026-04-27 |
| CVE-2026-33258 | By publishing and querying a crafted zone an attacker can cause allocation of large entries in the negative and aggressive NSEC(3) caches. | high | 2026-04-27 |
