| CVE-2022-50269 | In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix memory leak in vkms_init() A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened. | medium |
| CVE-2022-50268 | In the Linux kernel, the following vulnerability has been resolved: mmc: moxart: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(). | medium |
| CVE-2022-50267 | In the Linux kernel, the following vulnerability has been resolved: mmc: rtsx_pci: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path, beside, runtime PM also needs be disabled. | medium |
| CVE-2022-50266 | In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix check for probe enabled in kill_kprobe() In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be called always fails. This is because before that we set the KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always false. The disarm_kprobe_ftrace() call introduced by commit: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") to fix the NULL pointer reference problem. When the probe is enabled, if we do not disarm it, this problem still exists. Fix it by putting the probe enabled check before setting the KPROBE_FLAG_GONE flag. | medium |
| CVE-2022-50265 | In the Linux kernel, the following vulnerability has been resolved: kcm: annotate data-races around kcm->rx_wait kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. syzbot reported: BUG: KCSAN: data-race in kcm_rcv_strparser / kcm_rfree write to 0xffff88810784e3d0 of 1 bytes by task 1823 on cpu 1: reserve_rx_kcm net/kcm/kcmsock.c:283 [inline] kcm_rcv_strparser+0x250/0x3a0 net/kcm/kcmsock.c:363 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff88810784e3d0 of 1 bytes by task 17869 on cpu 0: kcm_rfree+0x121/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x01 -> 0x00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 17869 Comm: syz-executor.2 Not tainted 6.1.0-rc1-syzkaller-00010-gbb1a1146467a-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 | medium |
| CVE-2022-50264 | In the Linux kernel, the following vulnerability has been resolved: clk: socfpga: Fix memory leak in socfpga_gate_init() Free @socfpga_clk and @ops on the error path to avoid memory leak issue. | medium |
| CVE-2022-50263 | In the Linux kernel, the following vulnerability has been resolved: vdpasim: fix memory leak when freeing IOTLBs After commit bda324fd037a ("vdpasim: control virtqueue support"), vdpasim->iommu became an array of IOTLB, so we should clean the mappings of each free one by one instead of just deleting the ranges in the first IOTLB which may leak maps. | medium |
| CVE-2022-50262 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Validate BOOT record_size When the NTFS BOOT record_size field < 0, it represents a shift value. However, there is no sanity check on the shift result and the sbi->record_bits calculation through blksize_bits() assumes the size always > 256, which could lead to NPD while mounting a malformed NTFS image. [ 318.675159] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 318.675682] #PF: supervisor read access in kernel mode [ 318.675869] #PF: error_code(0x0000) - not-present page [ 318.676246] PGD 0 P4D 0 [ 318.676502] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 318.676934] CPU: 0 PID: 259 Comm: mount Not tainted 5.19.0 #5 [ 318.677289] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 318.678136] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.678656] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.679848] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.680104] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.680790] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.681679] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.682577] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.683015] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.683618] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ 318.684280] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 318.684651] CR2: 0000000000000158 CR3: 0000000002e1a000 CR4: 00000000000006f0 [ 318.685623] Call Trace: [ 318.686607] <TASK> [ 318.686872] ? ntfs_alloc_inode+0x1a/0x60 [ 318.687235] attr_load_runs_vcn+0x2b/0xa0 [ 318.687468] mi_read+0xbb/0x250 [ 318.687576] ntfs_iget5+0x114/0xd90 [ 318.687750] ntfs_fill_super+0x588/0x11b0 [ 318.687953] ? put_ntfs+0x130/0x130 [ 318.688065] ? snprintf+0x49/0x70 [ 318.688164] ? put_ntfs+0x130/0x130 [ 318.688256] get_tree_bdev+0x16a/0x260 [ 318.688407] vfs_get_tree+0x20/0xb0 [ 318.688519] path_mount+0x2dc/0x9b0 [ 318.688877] do_mount+0x74/0x90 [ 318.689142] __x64_sys_mount+0x89/0xd0 [ 318.689636] do_syscall_64+0x3b/0x90 [ 318.689998] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 318.690318] RIP: 0033:0x7fd9e133c48a [ 318.690687] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 318.691357] RSP: 002b:00007ffd374406c8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 [ 318.691632] RAX: ffffffffffffffda RBX: 0000564d0b051080 RCX: 00007fd9e133c48a [ 318.691920] RDX: 0000564d0b051280 RSI: 0000564d0b051300 RDI: 0000564d0b0596a0 [ 318.692123] RBP: 0000000000000000 R08: 0000564d0b0512a0 R09: 0000000000000020 [ 318.692349] R10: 00000000c0ed0000 R11: 0000000000000202 R12: 0000564d0b0596a0 [ 318.692673] R13: 0000564d0b051280 R14: 0000000000000000 R15: 00000000ffffffff [ 318.693007] </TASK> [ 318.693271] Modules linked in: [ 318.693614] CR2: 0000000000000158 [ 318.694446] ---[ end trace 0000000000000000 ]--- [ 318.694779] RIP: 0010:ni_find_attr+0x2d/0x1c0 [ 318.694952] Code: 89 ca 4d 89 c7 41 56 41 55 41 54 41 89 cc 55 48 89 fd 53 48 89 d3 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 44 24 180 [ 318.696042] RSP: 0018:ffffa6c8c0297bd8 EFLAGS: 00000246 [ 318.696531] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000080 [ 318.698114] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 318.699286] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 318.699795] R10: 0000000000000000 R11: 0000000000000005 R12: 0000000000000080 [ 318.700236] R13: ffff8d5582e68400 R14: 0000000000000100 R15: 0000000000000000 [ 318.700973] FS: 00007fd9e1c81e40(0000) GS:ffff8d55fdc00000(0000) knlGS:0000000000000000 [ ---truncated--- | high |
| CVE-2025-59377 | feiskyer mcp-kubernetes-server through 0.1.11 allows OS command injection, even in read-only mode, via /mcp/kubectl because shell=True is used. NOTE: this is unrelated to mcp-server-kubernetes and CVE-2025-53355. | critical |
| CVE-2025-59376 | feiskyer mcp-kubernetes-server through 0.1.11 does not consider chained commands in the implementation of --disable-write and --disable-delete, e.g., it allows a "kubectl version; kubectl delete pod" command because the first word (i.e., "version") is not a write or delete operation. | medium |
| CVE-2025-56710 | A Cross-Site Request Forgery (CSRF) vulnerability was identified in the Profile Page of the PHPGurukul Student-Result-Management-System-Using-PHP-V2.0. This flaw allows an attacker to trick authenticated users into unintentionally modifying their account details. By crafting a malicious HTML page, an attacker can submit unauthorized requests to the vulnerable endpoint: /create-class.php. | high |
| CVE-2025-50944 | An issue was discovered in the method push.lite.avtech.com.MySSLSocketFactoryNew.checkServerTrusted in AVTECH EagleEyes 2.0.0. The custom X509TrustManager used in checkServerTrusted only checks the certificate's expiration date, skipping proper TLS chain validation. | high |
| CVE-2025-50110 | An issue was discovered in the method push.lite.avtech.com.AvtechLib.GetHttpsResponse in AVTECH EagleEyes Lite 2.0.0, the GetHttpsResponse method transmits sensitive information - including internal server URLs, account IDs, passwords, and device tokens - as plaintext query parameters over HTTPS | high |
| CVE-2025-46408 | An issue was discovered in the methods push.lite.avtech.com.AvtechLib.GetHttpsResponse and push.lite.avtech.com.Push_HttpService.getNewHttpClient in AVTECH EagleEyes 2.0.0. The methods set ALLOW_ALL_HOSTNAME_VERIFIER, bypassing domain validation. | critical |
| CVE-2025-10448 | A flaw has been found in Campcodes Online Job Finder System 1.0. This affects an unknown function of the file /index.php?q=result&searchfor=bycompany. This manipulation of the argument Search causes sql injection. The attack can be initiated remotely. The exploit has been published and may be used. | medium |
| CVE-2025-10447 | A vulnerability was detected in Campcodes Online Job Finder System 1.0. The impacted element is an unknown function of the file /eris/applicationform.php. The manipulation of the argument picture results in unrestricted upload. It is possible to launch the attack remotely. The exploit is now public and may be used. | medium |
| CVE-2023-53198 | In the Linux kernel, the following vulnerability has been resolved: raw: Fix NULL deref in raw_get_next(). Dae R. Jeong reported a NULL deref in raw_get_next() [0]. It seems that the repro was running these sequences in parallel so that one thread was iterating on a socket that was being freed in another netns. unshare(0x40060200) r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00') socket$inet_icmp_raw(0x2, 0x3, 0x1) pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f) After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW sockets. However, we should use spinlock for slow paths to avoid the NULL deref. Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object is not reused during iteration in the grace period. In fact, the lockless readers do not check the nulls marker with get_nulls_value(). So, SOCK_RAW should use hlist instead of hlist_nulls. Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(), let's convert hlist_nulls to hlist and use sk_for_each_rcu() for fast paths and sk_for_each() and spinlock for /proc/net/raw. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225 seq_read+0x224/0x320 fs/seq_file.c:162 pde_read fs/proc/inode.c:316 [inline] proc_reg_read+0x23f/0x330 fs/proc/inode.c:328 vfs_read+0x31e/0xd30 fs/read_write.c:468 ksys_pread64 fs/read_write.c:665 [inline] __do_sys_pread64 fs/read_write.c:675 [inline] __se_sys_pread64 fs/read_write.c:672 [inline] __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x478d29 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29 RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000 R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740 R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010 ---truncated--- | high |
| CVE-2023-53197 | In the Linux kernel, the following vulnerability has been resolved: USB: uhci: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | medium |
| CVE-2023-53196 | In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: qcom: Fix potential memory leak Function dwc3_qcom_probe() allocates memory for resource structure which is pointed by parent_res pointer. This memory is not freed. This leads to memory leak. Use stack memory to prevent memory leak. Found by Linux Verification Center (linuxtesting.org) with SVACE. | medium |
| CVE-2023-53195 | In the Linux kernel, the following vulnerability has been resolved: mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init The line cards array is not freed in the error path of mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by freeing the array in the error path, thereby making the error path identical to mlxsw_m_linecards_fini(). | medium |
| CVE-2023-53194 | In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add length check in indx_get_root This adds a length check to guarantee the retrieved index root is legit. [ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320 [ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243 [ 162.460851] [ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42 [ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 162.462609] Call Trace: [ 162.462954] <TASK> [ 162.463276] dump_stack_lvl+0x49/0x63 [ 162.463822] print_report.cold+0xf5/0x689 [ 162.464608] ? unwind_get_return_address+0x3a/0x60 [ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.466975] kasan_report+0xa7/0x130 [ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0 [ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.468536] __asan_load2+0x68/0x90 [ 162.468923] hdr_find_e.isra.0+0x10c/0x320 [ 162.469282] ? cmp_uints+0xe0/0xe0 [ 162.469557] ? cmp_sdh+0x90/0x90 [ 162.469864] ? ni_find_attr+0x214/0x300 [ 162.470217] ? ni_load_mi+0x80/0x80 [ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.470931] ? ntfs_bread_run+0x190/0x190 [ 162.471307] ? indx_get_root+0xe4/0x190 [ 162.471556] ? indx_get_root+0x140/0x190 [ 162.471833] ? indx_init+0x1e0/0x1e0 [ 162.472069] ? fnd_clear+0x115/0x140 [ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100 [ 162.472731] indx_find+0x184/0x470 [ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 162.474429] ? indx_find_buffer+0x2d0/0x2d0 [ 162.474704] ? do_syscall_64+0x3b/0x90 [ 162.474962] dir_search_u+0x196/0x2f0 [ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450 [ 162.475661] ? ntfs_security_init+0x3d6/0x440 [ 162.475906] ? is_sd_valid+0x180/0x180 [ 162.476191] ntfs_extend_init+0x13f/0x2c0 [ 162.476496] ? ntfs_fix_post_read+0x130/0x130 [ 162.476861] ? iput.part.0+0x286/0x320 [ 162.477325] ntfs_fill_super+0x11e0/0x1b50 [ 162.477709] ? put_ntfs+0x1d0/0x1d0 [ 162.477970] ? vsprintf+0x20/0x20 [ 162.478258] ? set_blocksize+0x95/0x150 [ 162.478538] get_tree_bdev+0x232/0x370 [ 162.478789] ? put_ntfs+0x1d0/0x1d0 [ 162.479038] ntfs_fs_get_tree+0x15/0x20 [ 162.479374] vfs_get_tree+0x4c/0x130 [ 162.479729] path_mount+0x654/0xfe0 [ 162.480124] ? putname+0x80/0xa0 [ 162.480484] ? finish_automount+0x2e0/0x2e0 [ 162.480894] ? putname+0x80/0xa0 [ 162.481467] ? kmem_cache_free+0x1c4/0x440 [ 162.482280] ? putname+0x80/0xa0 [ 162.482714] do_mount+0xd6/0xf0 [ 162.483264] ? path_mount+0xfe0/0xfe0 [ 162.484782] ? __kasan_check_write+0x14/0x20 [ 162.485593] __x64_sys_mount+0xca/0x110 [ 162.486024] do_syscall_64+0x3b/0x90 [ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.487141] RIP: 0033:0x7f9d374e948a [ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a [ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0 [ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020 [ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0 [ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff [ 162.493644] </TASK> [ 162.493908] [ 162.494214] The buggy address belongs to the physical page: [ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc [ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000 [ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 162.500542] page dumped becau ---truncated--- | high |
| CVE-2023-53193 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 | high |
| CVE-2023-53192 | In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated--- | medium |
| CVE-2023-53191 | In the Linux kernel, the following vulnerability has been resolved: irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | high |
| CVE-2023-53190 | In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix memory leaks in error path The memory allocated by vxlan_vnigroup_init() is not freed in the error path, leading to memory leaks [1]. Fix by calling vxlan_vnigroup_uninit() in the error path. The leaks can be reproduced by annotating gro_cells_init() with ALLOW_ERROR_INJECTION() and then running: # echo "100" > /sys/kernel/debug/fail_function/probability # echo "1" > /sys/kernel/debug/fail_function/times # echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject # printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval # ip link add name vxlan0 type vxlan dstport 4789 external vnifilter RTNETLINK answers: Cannot allocate memory [1] unreferenced object 0xffff88810db84a00 (size 512): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v............. 03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H........... backtrace: [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60 [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff8424da78>] do_syscall_64+0x38/0x80 unreferenced object 0xffff88810e76d5f8 (size 192): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O..... 08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v..... backtrace: [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90 [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0 [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0 [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 | medium |
| CVE-2023-53189 | In the Linux kernel, the following vulnerability has been resolved: ipv6/addrconf: fix a potential refcount underflow for idev Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0. | high |
| CVE-2023-53188 | In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix race on port output assume the following setup on a single machine: 1. An openvswitch instance with one bridge and default flows 2. two network namespaces "server" and "client" 3. two ovs interfaces "server" and "client" on the bridge 4. for each ovs interface a veth pair with a matching name and 32 rx and tx queues 5. move the ends of the veth pairs to the respective network namespaces 6. assign ip addresses to each of the veth ends in the namespaces (needs to be the same subnet) 7. start some http server on the server network namespace 8. test if a client in the client namespace can reach the http server when following the actions below the host has a chance of getting a cpu stuck in a infinite loop: 1. send a large amount of parallel requests to the http server (around 3000 curls should work) 2. in parallel delete the network namespace (do not delete interfaces or stop the server, just kill the namespace) there is a low chance that this will cause the below kernel cpu stuck message. If this does not happen just retry. Below there is also the output of bpftrace for the functions mentioned in the output. The series of events happening here is: 1. the network namespace is deleted calling `unregister_netdevice_many_notify` somewhere in the process 2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and then runs `synchronize_net` 3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER` 4. this is then handled by `dp_device_event` which calls `ovs_netdev_detach_dev` (if a vport is found, which is the case for the veth interface attached to ovs) 5. this removes the rx_handlers of the device but does not prevent packages to be sent to the device 6. `dp_device_event` then queues the vport deletion to work in background as a ovs_lock is needed that we do not hold in the unregistration path 7. `unregister_netdevice_many_notify` continues to call `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0 8. port deletion continues (but details are not relevant for this issue) 9. at some future point the background task deletes the vport If after 7. but before 9. a packet is send to the ovs vport (which is not deleted at this point in time) which forwards it to the `dev_queue_xmit` flow even though the device is unregistering. In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is a while loop (if the packet has a rx_queue recorded) that is infinite if `dev->real_num_tx_queues` is zero. To prevent this from happening we update `do_output` to handle devices without carrier the same as if the device is not found (which would be the code path after 9. is done). Additionally we now produce a warning in `skb_tx_hash` if we will hit the infinite loop. bpftrace (first word is function name): __dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2 ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2 netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 dp_ ---truncated--- | medium |
| CVE-2023-53187 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked ---truncated--- | medium |
| CVE-2023-53186 | In the Linux kernel, the following vulnerability has been resolved: skbuff: Fix a race between coalescing and releasing SKBs Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment recycling") allowed coalescing to proceed with non page pool page and page pool page when @from is cloned, i.e. to->pp_recycle --> false from->pp_recycle --> true skb_cloned(from) --> true However, it actually requires skb_cloned(@from) to hold true until coalescing finishes in this situation. If the other cloned SKB is released while the merging is in process, from_shinfo->nr_frags will be set to 0 toward the end of the function, causing the increment of frag page _refcount to be unexpectedly skipped resulting in inconsistent reference counts. Later when SKB(@to) is released, it frees the page directly even though the page pool page is still in use, leading to use-after-free or double-free errors. So it should be prohibited. The double-free error message below prompted us to investigate: BUG: Bad page state in process swapper/1 pfn:0e0d1 page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x2 pfn:0xe0d1 flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000 raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000 page dumped because: nonzero _refcount CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+ Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 bad_page+0x69/0xf0 free_pcp_prepare+0x260/0x2f0 free_unref_page+0x20/0x1c0 skb_release_data+0x10b/0x1a0 napi_consume_skb+0x56/0x150 net_rx_action+0xf0/0x350 ? __napi_schedule+0x79/0x90 __do_softirq+0xc8/0x2b1 __irq_exit_rcu+0xb9/0xf0 common_interrupt+0x82/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0xb/0x20 | high |
| CVE-2023-53185 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes A bad USB device is able to construct a service connection response message with target endpoint being ENDPOINT0 which is reserved for HTC_CTRL_RSVD_SVC and should not be modified to be used for any other services. Reject such service connection responses. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | high |
| CVE-2023-53184 | In the Linux kernel, the following vulnerability has been resolved: arm64/sme: Set new vector length before reallocating As part of fixing the allocation of the buffer for SVE state when changing SME vector length we introduced an immediate reallocation of the SVE state, this is also done when changing the SVE vector length for consistency. Unfortunately this reallocation is done prior to writing the new vector length to the task struct, meaning the allocation is done with the old vector length and can lead to memory corruption due to an undersized buffer being used. Move the update of the vector length before the allocation to ensure that the new vector length is taken into account. For some reason this isn't triggering any problems when running tests on the arm64 fixes branch (even after repeated tries) but is triggering issues very often after merge into mainline. | high |
| CVE-2023-53183 | In the Linux kernel, the following vulnerability has been resolved: btrfs: exit gracefully if reloc roots don't match [BUG] Syzbot reported a crash that an ASSERT() got triggered inside prepare_to_merge(). [CAUSE] The root cause of the triggered ASSERT() is we can have a race between quota tree creation and relocation. This leads us to create a duplicated quota tree in the btrfs_read_fs_root() path, and since it's treated as fs tree, it would have ROOT_SHAREABLE flag, causing us to create a reloc tree for it. The bug itself is fixed by a dedicated patch for it, but this already taught us the ASSERT() is not something straightforward for developers. [ENHANCEMENT] Instead of using an ASSERT(), let's handle it gracefully and output extra info about the mismatch reloc roots to help debug. Also with the above ASSERT() removed, we can trigger ASSERT(0)s inside merge_reloc_roots() later. Also replace those ASSERT(0)s with WARN_ON()s. | medium |
| CVE-2023-53182 | In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. | high |
| CVE-2023-53181 | In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-resv: Stop leaking on krealloc() failure Currently dma_resv_get_fences() will leak the previously allocated array if the fence iteration got restarted and the krealloc_array() fails. Free the old array by hand, and make sure we still clear the returned *fences so the caller won't end up accessing freed memory. Some (but not all) of the callers of dma_resv_get_fences() seem to still trawl through the array even when dma_resv_get_fences() failed. And let's zero out *num_fences as well for good measure. | high |
| CVE-2023-53180 | In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Currently 'ar' reference is not added in skb_cb. Though this is generally not used during transmit completion callbacks, on interface removal the remaining idr cleanup callback uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them during transmit call for proper usage to avoid NULL pointer dereference. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | medium |
| CVE-2023-53179 | In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue. | high |
| CVE-2023-53178 | In the Linux kernel, the following vulnerability has been resolved: mm: fix zswap writeback race condition The zswap writeback mechanism can cause a race condition resulting in memory corruption, where a swapped out page gets swapped in with data that was written to a different page. The race unfolds like this: 1. a page with data A and swap offset X is stored in zswap 2. page A is removed off the LRU by zpool driver for writeback in zswap-shrink work, data for A is mapped by zpool driver 3. user space program faults and invalidates page entry A, offset X is considered free 4. kswapd stores page B at offset X in zswap (zswap could also be full, if so, page B would then be IOed to X, then skip step 5.) 5. entry A is replaced by B in tree->rbroot, this doesn't affect the local reference held by zswap-shrink work 6. zswap-shrink work writes back A at X, and frees zswap entry A 7. swapin of slot X brings A in memory instead of B The fix: Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW), zswap-shrink work just checks that the local zswap_entry reference is still the same as the one in the tree. If it's not the same it means that it's either been invalidated or replaced, in both cases the writeback is aborted because the local entry contains stale data. Reproducer: I originally found this by running `stress` overnight to validate my work on the zswap writeback mechanism, it manifested after hours on my test machine. The key to make it happen is having zswap writebacks, so whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do the trick. In order to reproduce this faster on a vm, I setup a system with ~100M of available memory and a 500M swap file, then running `stress --vm 1 --vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens of minutes. One can speed things up even more by swinging /sys/module/zswap/parameters/max_pool_percent up and down between, say, 20 and 1; this makes it reproduce in tens of seconds. It's crucial to set `--vm-stride` to something other than 4096 otherwise `stress` won't realize that memory has been corrupted because all pages would have the same data. | medium |
| CVE-2023-53177 | In the Linux kernel, the following vulnerability has been resolved: media: hi846: fix usage of pm_runtime_get_if_in_use() pm_runtime_get_if_in_use() does not only return nonzero values when the device is in use, it can return a negative errno too. And especially during resuming from system suspend, when runtime pm is not yet up again, -EAGAIN is being returned, so the subsequent pm_runtime_put() call results in a refcount underflow. Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use(). | medium |
| CVE-2023-53176 | In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Reinit port->pm on port specific driver unbind When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. | high |
| CVE-2023-53175 | In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. | medium |
| CVE-2023-53174 | In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to decrease the reference count in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp(). | medium |
| CVE-2023-53173 | In the Linux kernel, the following vulnerability has been resolved: tty: pcn_uart: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | medium |
| CVE-2023-53172 | In the Linux kernel, the following vulnerability has been resolved: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds Commit 56124d6c87fd ("fsverity: support enabling with tree block size < PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read the file's data, instead of direct pagecache accesses. An unintended consequence of this is that the 'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called on a fd opened with access mode 3, which means "ioctl access only". Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But ioctl-only fds are a weird Linux extension that is rarely used and that few people even know about. (The documentation for FS_IOC_ENABLE_VERITY even specifically says it requires O_RDONLY.) It's probably not worthwhile to make the ioctl internally open a new fd just to handle this case. Thus, just reject the ioctl on such fds for now. | medium |
| CVE-2023-53171 | In the Linux kernel, the following vulnerability has been resolved: vfio/type1: prevent underflow of locked_vm via exec() When a vfio container is preserved across exec, the task does not change, but it gets a new mm with locked_vm=0, and loses the count from existing dma mappings. If the user later unmaps a dma mapping, locked_vm underflows to a large unsigned value, and a subsequent dma map request fails with ENOMEM in __account_locked_vm. To avoid underflow, grab and save the mm at the time a dma is mapped. Use that mm when adjusting locked_vm, rather than re-acquiring the saved task's mm, which may have changed. If the saved mm is dead, do nothing. locked_vm is incremented for existing mappings in a subsequent patch. | high |
| CVE-2023-53170 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: Removed unneeded of_node_put in felix_parse_ports_node Remove unnecessary of_node_put from the continue path to prevent child node from being released twice, which could avoid resource leak or other unexpected issues. | medium |
| CVE-2023-53169 | In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags] | medium |
| CVE-2023-53168 | In the Linux kernel, the following vulnerability has been resolved: usb: ucsi_acpi: Increase the command completion timeout Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases. | medium |
| CVE-2023-53167 | In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception | medium |
| CVE-2023-53166 | In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power_changed() may get called while bq->charger has not been set yet leading to a NULL pointer dereference. This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting the connected charger-type which happens to exactly hit the small window: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0 <snip> Call Trace: <TASK> __power_supply_get_supplier_property+0x19/0x50 class_for_each_device+0xb1/0xe0 power_supply_get_property_from_supplier+0x2e/0x50 bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger] __power_supply_changed_work+0x30/0x40 class_for_each_device+0xb1/0xe0 power_supply_changed_work+0x5f/0xe0 <snip> Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in bq->charger, so bq25890_charger_external_power_changed() can simply directly use the passed in psy argument which is always valid. | medium |
| CVE-2023-53165 | In the Linux kernel, the following vulnerability has been resolved: udf: Fix uninitialized array access for some pathnames For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this. | high |
