| CVE-2025-38376 | In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability. | medium |
| CVE-2025-38375 | In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check. | high |
| CVE-2025-38374 | In the Linux kernel, the following vulnerability has been resolved: optee: ffa: fix sleep in atomic context The OP-TEE driver registers the function notif_callback() for FF-A notifications. However, this function is called in an atomic context leading to errors like this when processing asynchronous notifications: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:258 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 9, name: kworker/0:0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.14.0-00019-g657536ebe0aa #13 | Hardware name: linux,dummy-virt (DT) | Workqueue: ffa_pcpu_irq_notification notif_pcpu_irq_work_fn | Call trace: | show_stack+0x18/0x24 (C) | dump_stack_lvl+0x78/0x90 | dump_stack+0x18/0x24 | __might_resched+0x114/0x170 | __might_sleep+0x48/0x98 | mutex_lock+0x24/0x80 | optee_get_msg_arg+0x7c/0x21c | simple_call_with_arg+0x50/0xc0 | optee_do_bottom_half+0x14/0x20 | notif_callback+0x3c/0x48 | handle_notif_callbacks+0x9c/0xe0 | notif_get_and_handle+0x40/0x88 | generic_exec_single+0x80/0xc0 | smp_call_function_single+0xfc/0x1a0 | notif_pcpu_irq_work_fn+0x2c/0x38 | process_one_work+0x14c/0x2b4 | worker_thread+0x2e4/0x3e0 | kthread+0x13c/0x210 | ret_from_fork+0x10/0x20 Fix this by adding work queue to process the notification in a non-atomic context. | medium |
| CVE-2025-38373 | In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix potential deadlock in MR deregistration The issue arises when kzalloc() is invoked while holding umem_mutex or any other lock acquired under umem_mutex. This is problematic because kzalloc() can trigger fs_reclaim_aqcuire(), which may, in turn, invoke mmu_notifier_invalidate_range_start(). This function can lead to mlx5_ib_invalidate_range(), which attempts to acquire umem_mutex again, resulting in a deadlock. The problematic flow: CPU0 | CPU1 ---------------------------------------|------------------------------------------------ mlx5_ib_dereg_mr() | → revoke_mr() | → mutex_lock(&umem_odp->umem_mutex) | | mlx5_mkey_cache_init() | → mutex_lock(&dev->cache.rb_lock) | → mlx5r_cache_create_ent_locked() | → kzalloc(GFP_KERNEL) | → fs_reclaim() | → mmu_notifier_invalidate_range_start() | → mlx5_ib_invalidate_range() | → mutex_lock(&umem_odp->umem_mutex) → cache_ent_find_and_store() | → mutex_lock(&dev->cache.rb_lock) | Additionally, when kzalloc() is called from within cache_ent_find_and_store(), we encounter the same deadlock due to re-acquisition of umem_mutex. Solve by releasing umem_mutex in dereg_mr() after umr_revoke_mr() and before acquiring rb_lock. This ensures that we don't hold umem_mutex while performing memory allocations that could trigger the reclaim path. This change prevents the deadlock by ensuring proper lock ordering and avoiding holding locks during memory allocation operations that could trigger the reclaim path. The following lockdep warning demonstrates the deadlock: python3/20557 is trying to acquire lock: ffff888387542128 (&umem_odp->umem_mutex){+.+.}-{4:4}, at: mlx5_ib_invalidate_range+0x5b/0x550 [mlx5_ib] but task is already holding lock: ffffffff82f6b840 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}, at: unmap_vmas+0x7b/0x1a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (mmu_notifier_invalidate_range_start){+.+.}-{0:0}: fs_reclaim_acquire+0x60/0xd0 mem_cgroup_css_alloc+0x6f/0x9b0 cgroup_init_subsys+0xa4/0x240 cgroup_init+0x1c8/0x510 start_kernel+0x747/0x760 x86_64_start_reservations+0x25/0x30 x86_64_start_kernel+0x73/0x80 common_startup_64+0x129/0x138 -> #2 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0x91/0xd0 __kmalloc_cache_noprof+0x4d/0x4c0 mlx5r_cache_create_ent_locked+0x75/0x620 [mlx5_ib] mlx5_mkey_cache_init+0x186/0x360 [mlx5_ib] mlx5_ib_stage_post_ib_reg_umr_init+0x3c/0x60 [mlx5_ib] __mlx5_ib_add+0x4b/0x190 [mlx5_ib] mlx5r_probe+0xd9/0x320 [mlx5_ib] auxiliary_bus_probe+0x42/0x70 really_probe+0xdb/0x360 __driver_probe_device+0x8f/0x130 driver_probe_device+0x1f/0xb0 __driver_attach+0xd4/0x1f0 bus_for_each_dev+0x79/0xd0 bus_add_driver+0xf0/0x200 driver_register+0x6e/0xc0 __auxiliary_driver_register+0x6a/0xc0 do_one_initcall+0x5e/0x390 do_init_module+0x88/0x240 init_module_from_file+0x85/0xc0 idempotent_init_module+0x104/0x300 __x64_sys_finit_module+0x68/0xc0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #1 (&dev->cache.rb_lock){+.+.}-{4:4}: __mutex_lock+0x98/0xf10 __mlx5_ib_dereg_mr+0x6f2/0x890 [mlx5_ib] mlx5_ib_dereg_mr+0x21/0x110 [mlx5_ib] ib_dereg_mr_user+0x85/0x1f0 [ib_core] ---truncated--- | medium |
| CVE-2025-38372 | In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling __xa_store() and __xa_erase() were used without holding the proper lock, which led to a lockdep warning due to unsafe RCU usage. This patch replaces them with xa_store() and xa_erase(), which perform the necessary locking internally. ============================= WARNING: suspicious RCPU usage 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted ----------------------------- ./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by kworker/u136:0/219: at: process_one_work+0xbe4/0x15f0 process_one_work+0x75c/0x15f0 pagefault_mr+0x9a5/0x1390 [mlx5_ib] stack backtrace: CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted 6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib] Call Trace: dump_stack_lvl+0xa8/0xc0 lockdep_rcu_suspicious+0x1e6/0x260 xas_create+0xb8a/0xee0 xas_store+0x73/0x14c0 __xa_store+0x13c/0x220 ? xa_store_range+0x390/0x390 ? spin_bug+0x1d0/0x1d0 pagefault_mr+0xcb5/0x1390 [mlx5_ib] ? _raw_spin_unlock+0x1f/0x30 mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib] process_one_work+0x7db/0x15f0 ? pwq_dec_nr_in_flight+0xda0/0xda0 ? assign_work+0x168/0x240 worker_thread+0x57d/0xcd0 ? rescuer_thread+0xc40/0xc40 kthread+0x3b3/0x800 ? kthread_is_per_cpu+0xb0/0xb0 ? lock_downgrade+0x680/0x680 ? do_raw_spin_lock+0x12d/0x270 ? spin_bug+0x1d0/0x1d0 ? finish_task_switch.isra.0+0x284/0x9e0 ? lockdep_hardirqs_on_prepare+0x284/0x400 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork+0x2d/0x70 ? kthread_is_per_cpu+0xb0/0xb0 ret_from_fork_asm+0x11/0x20 | high |
| CVE-2025-38371 | In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Disable interrupts before resetting the GPU Currently, an interrupt can be triggered during a GPU reset, which can lead to GPU hangs and NULL pointer dereference in an interrupt context as shown in the following trace: [ 314.035040] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 314.043822] Mem abort info: [ 314.046606] ESR = 0x0000000096000005 [ 314.050347] EC = 0x25: DABT (current EL), IL = 32 bits [ 314.055651] SET = 0, FnV = 0 [ 314.058695] EA = 0, S1PTW = 0 [ 314.061826] FSC = 0x05: level 1 translation fault [ 314.066694] Data abort info: [ 314.069564] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 314.075039] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 314.080080] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 314.085382] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000102728000 [ 314.091814] [00000000000000c0] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 314.100511] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 314.106770] Modules linked in: v3d i2c_brcmstb vc4 snd_soc_hdmi_codec gpu_sched drm_shmem_helper drm_display_helper cec drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 314.129654] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.25+rpt-rpi-v8 #1 Debian 1:6.12.25-1+rpt1 [ 314.139388] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 314.145211] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 314.152165] pc : v3d_irq+0xec/0x2e0 [v3d] [ 314.156187] lr : v3d_irq+0xe0/0x2e0 [v3d] [ 314.160198] sp : ffffffc080003ea0 [ 314.163502] x29: ffffffc080003ea0 x28: ffffffec1f184980 x27: 021202b000000000 [ 314.170633] x26: ffffffec1f17f630 x25: ffffff8101372000 x24: ffffffec1f17d9f0 [ 314.177764] x23: 000000000000002a x22: 000000000000002a x21: ffffff8103252000 [ 314.184895] x20: 0000000000000001 x19: 00000000deadbeef x18: 0000000000000000 [ 314.192026] x17: ffffff94e51d2000 x16: ffffffec1dac3cb0 x15: c306000000000000 [ 314.199156] x14: 0000000000000000 x13: b2fc982e03cc5168 x12: 0000000000000001 [ 314.206286] x11: ffffff8103f8bcc0 x10: ffffffec1f196868 x9 : ffffffec1dac3874 [ 314.213416] x8 : 0000000000000000 x7 : 0000000000042a3a x6 : ffffff810017a180 [ 314.220547] x5 : ffffffec1ebad400 x4 : ffffffec1ebad320 x3 : 00000000000bebeb [ 314.227677] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 314.234807] Call trace: [ 314.237243] v3d_irq+0xec/0x2e0 [v3d] [ 314.240906] __handle_irq_event_percpu+0x58/0x218 [ 314.245609] handle_irq_event+0x54/0xb8 [ 314.249439] handle_fasteoi_irq+0xac/0x240 [ 314.253527] handle_irq_desc+0x48/0x68 [ 314.257269] generic_handle_domain_irq+0x24/0x38 [ 314.261879] gic_handle_irq+0x48/0xd8 [ 314.265533] call_on_irq_stack+0x24/0x58 [ 314.269448] do_interrupt_handler+0x88/0x98 [ 314.273624] el1_interrupt+0x34/0x68 [ 314.277193] el1h_64_irq_handler+0x18/0x28 [ 314.281281] el1h_64_irq+0x64/0x68 [ 314.284673] default_idle_call+0x3c/0x168 [ 314.288675] do_idle+0x1fc/0x230 [ 314.291895] cpu_startup_entry+0x3c/0x50 [ 314.295810] rest_init+0xe4/0xf0 [ 314.299030] start_kernel+0x5e8/0x790 [ 314.302684] __primary_switched+0x80/0x90 [ 314.306691] Code: 940029eb 360ffc13 f9442ea0 52800001 (f9406017) [ 314.312775] ---[ end trace 0000000000000000 ]--- [ 314.317384] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 314.324249] SMP: stopping secondary CPUs [ 314.328167] Kernel Offset: 0x2b9da00000 from 0xffffffc080000000 [ 314.334076] PHYS_OFFSET: 0x0 [ 314.336946] CPU features: 0x08,00002013,c0200000,0200421b [ 314.342337] Memory Limit: none [ 314.345382] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Before resetting the G ---truncated--- | medium |
| CVE-2025-38370 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix failure to rebuild free space tree using multiple transactions If we are rebuilding a free space tree, while modifying the free space tree we may need to allocate a new metadata block group. If we end up using multiple transactions for the rebuild, when we call btrfs_end_transaction() we enter btrfs_create_pending_block_groups() which calls add_block_group_free_space() to add items to the free space tree for the block group. Then later during the free space tree rebuild, at btrfs_rebuild_free_space_tree(), we may find such new block groups and call populate_free_space_tree() for them, which fails with -EEXIST because there are already items in the free space tree. Then we abort the transaction with -EEXIST at btrfs_rebuild_free_space_tree(). Notice that we say "may find" the new block groups because a new block group may be inserted in the block groups rbtree, which is being iterated by the rebuild process, before or after the current node where the rebuild process is currently at. Syzbot recently reported such case which produces a trace like the following: ------------[ cut here ]------------ BTRFS: Transaction aborted (error -17) WARNING: CPU: 1 PID: 7626 at fs/btrfs/free-space-tree.c:1341 btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 Modules linked in: CPU: 1 UID: 0 PID: 7626 Comm: syz.2.25 Not tainted 6.15.0-rc7-syzkaller-00085-gd7fa1af5b33e-dirty #0 PREEMPT Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 lr : btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 sp : ffff80009c4f7740 x29: ffff80009c4f77b0 x28: ffff0000d4c3f400 x27: 0000000000000000 x26: dfff800000000000 x25: ffff70001389eee8 x24: 0000000000000003 x23: 1fffe000182b6e7b x22: 0000000000000000 x21: ffff0000c15b73d8 x20: 00000000ffffffef x19: ffff0000c15b7378 x18: 1fffe0003386f276 x17: ffff80008f31e000 x16: ffff80008adbe98c x15: 0000000000000001 x14: 1fffe0001b281550 x13: 0000000000000000 x12: 0000000000000000 x11: ffff60001b281551 x10: 0000000000000003 x9 : 1c8922000a902c00 x8 : 1c8922000a902c00 x7 : ffff800080485878 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : ffff80008047843c x2 : 0000000000000001 x1 : ffff80008b3ebc40 x0 : 0000000000000001 Call trace: btrfs_rebuild_free_space_tree+0x470/0x54c fs/btrfs/free-space-tree.c:1341 (P) btrfs_start_pre_rw_mount+0xa78/0xe10 fs/btrfs/disk-io.c:3074 btrfs_remount_rw fs/btrfs/super.c:1319 [inline] btrfs_reconfigure+0x828/0x2418 fs/btrfs/super.c:1543 reconfigure_super+0x1d4/0x6f0 fs/super.c:1083 do_remount fs/namespace.c:3365 [inline] path_mount+0xb34/0xde0 fs/namespace.c:4200 do_mount fs/namespace.c:4221 [inline] __do_sys_mount fs/namespace.c:4432 [inline] __se_sys_mount fs/namespace.c:4409 [inline] __arm64_sys_mount+0x3e8/0x468 fs/namespace.c:4409 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151 el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767 el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600 irq event stamp: 330 hardirqs last enabled at (329): [<ffff80008048590c>] raw_spin_rq_unlock_irq kernel/sched/sched.h:1525 [inline] hardirqs last enabled at (329): [<ffff80008048590c>] finish_lock_switch+0xb0/0x1c0 kernel/sched/core.c:5130 hardirqs last disabled at (330): [<ffff80008adb9e60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:511 softirqs last enabled at (10): [<ffff8000801fbf10>] local_bh_enable+0 ---truncated--- | high |
| CVE-2025-38369 | In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using Running IDXD workloads in a container with the /dev directory mounted can trigger a call trace or even a kernel panic when the parent process of the container is terminated. This issue occurs because, under certain configurations, Docker does not properly propagate the mount replica back to the original mount point. In this case, when the user driver detaches, the WQ is destroyed but it still calls destroy_workqueue() attempting to completes all pending work. It's necessary to check wq->wq and skip the drain if it no longer exists. | medium |
| CVE-2025-38368 | In the Linux kernel, the following vulnerability has been resolved: misc: tps6594-pfsm: Add NULL pointer check in tps6594_pfsm_probe() The returned value, pfsm->miscdev.name, from devm_kasprintf() could be NULL. A pointer check is added to prevent potential NULL pointer dereference. This is similar to the fix in commit 3027e7b15b02 ("ice: Fix some null pointer dereference issues in ice_ptp.c"). This issue is found by our static analysis tool. | medium |
| CVE-2025-38367 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Avoid overflow with array index The variable index is modified and reused as array index when modify register EIOINTC_ENABLE. There will be array index overflow problem. | high |
| CVE-2025-38366 | In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Check validity of "num_cpu" from user space The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about irqchip EIOINTC, here add validation about cpu number to avoid array pointer overflow. | high |
| CVE-2025-38365 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix a race between renames and directory logging We have a race between a rename and directory inode logging that if it happens and we crash/power fail before the rename completes, the next time the filesystem is mounted, the log replay code will end up deleting the file that was being renamed. This is best explained following a step by step analysis of an interleaving of steps that lead into this situation. Consider the initial conditions: 1) We are at transaction N; 2) We have directories A and B created in a past transaction (< N); 3) We have inode X corresponding to a file that has 2 hardlinks, one in directory A and the other in directory B, so we'll name them as "A/foo_link1" and "B/foo_link2". Both hard links were persisted in a past transaction (< N); 4) We have inode Y corresponding to a file that as a single hard link and is located in directory A, we'll name it as "A/bar". This file was also persisted in a past transaction (< N). The steps leading to a file loss are the following and for all of them we are under transaction N: 1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir(); 2) Task A starts a rename for inode Y, with the goal of renaming from "A/bar" to "A/baz", so we enter btrfs_rename(); 3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling btrfs_insert_inode_ref(); 4) Because the rename happens in the same directory, we don't set the last_unlink_trans field of directoty A's inode to the current transaction id, that is, we don't cal btrfs_record_unlink_dir(); 5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode() (actually the dir index item is added as a delayed item, but the effect is the same); 6) Now before task A adds the new entry "A/baz" to directory A by calling btrfs_add_link(), another task, task B is logging inode X; 7) Task B starts a fsync of inode X and after logging inode X, at btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since inode X has a last_unlink_trans value of N, set at in step 1; 8) At btrfs_log_all_parents() we search for all parent directories of inode X using the commit root, so we find directories A and B and log them. Bu when logging direct A, we don't have a dir index item for inode Y anymore, neither the old name "A/bar" nor for the new name "A/baz" since the rename has deleted the old name but has not yet inserted the new name - task A hasn't called yet btrfs_add_link() to do that. Note that logging directory A doesn't fallback to a transaction commit because its last_unlink_trans has a lower value than the current transaction's id (see step 4); 9) Task B finishes logging directories A and B and gets back to btrfs_sync_file() where it calls btrfs_sync_log() to persist the log tree; 10) Task B successfully persisted the log tree, btrfs_sync_log() completed with success, and a power failure happened. We have a log tree without any directory entry for inode Y, so the log replay code deletes the entry for inode Y, name "A/bar", from the subvolume tree since it doesn't exist in the log tree and the log tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY item that covers the index range for the dentry that corresponds to "A/bar"). Since there's no other hard link for inode Y and the log replay code deletes the name "A/bar", the file is lost. The issue wouldn't happen if task B synced the log only after task A called btrfs_log_new_name(), which would update the log with the new name for inode Y ("A/bar"). Fix this by pinning the log root during renames before removing the old directory entry, and unpinning af ---truncated--- | medium |
| CVE-2025-38364 | In the Linux kernel, the following vulnerability has been resolved: maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate() Temporarily clear the preallocation flag when explicitly requesting allocations. Pre-existing allocations are already counted against the request through mas_node_count_gfp(), but the allocations will not happen if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid re-allocating in bulk allocation mode, and to detect issues with preallocation calculations. The MA_STATE_PREALLOC flag should also always be set on zero allocations so that detection of underflow allocations will print a WARN_ON() during consumption. User visible effect of this flaw is a WARN_ON() followed by a null pointer dereference when subsequent requests for larger number of nodes is ignored, such as the vma merge retry in mmap_region() caused by drivers altering the vma flags (which happens in v6.6, at least) | medium |
| CVE-2025-38363 | In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix a possible null pointer dereference In tegra_crtc_reset(), new memory is allocated with kzalloc(), but no check is performed. Before calling __drm_atomic_helper_crtc_reset, state should be checked to prevent possible null pointer dereference. | medium |
| CVE-2025-38362 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null pointer check for get_first_active_display() The function mod_hdcp_hdcp1_enable_encryption() calls the function get_first_active_display(), but does not check its return value. The return value is a null pointer if the display list is empty. This will lead to a null pointer dereference in mod_hdcp_hdcp2_enable_encryption(). Add a null pointer check for get_first_active_display() and return MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null. | medium |
| CVE-2025-38361 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) | medium |
| CVE-2025-38360 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add more checks for DSC / HUBP ONO guarantees [WHY] For non-zero DSC instances it's possible that the HUBP domain required to drive it for sequential ONO ASICs isn't met, potentially causing the logic to the tile to enter an undefined state leading to a system hang. [HOW] Add more checks to ensure that the HUBP domain matching the DSC instance is appropriately powered. (cherry picked from commit da63df07112e5a9857a8d2aaa04255c4206754ec) | high |
| CVE-2025-38359 | In the Linux kernel, the following vulnerability has been resolved: s390/mm: Fix in_atomic() handling in do_secure_storage_access() Kernel user spaces accesses to not exported pages in atomic context incorrectly try to resolve the page fault. With debug options enabled call traces like this can be seen: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1523 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 419074, name: qemu-system-s39 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. Preemption disabled at: [<00000383ea47cfa2>] copy_page_from_iter_atomic+0xa2/0x8a0 CPU: 12 UID: 0 PID: 419074 Comm: qemu-system-s39 Tainted: G W 6.16.0-20250531.rc0.git0.69b3a602feac.63.fc42.s390x+debug #1 PREEMPT Tainted: [W]=WARN Hardware name: IBM 3931 A01 703 (LPAR) Call Trace: [<00000383e990d282>] dump_stack_lvl+0xa2/0xe8 [<00000383e99bf152>] __might_resched+0x292/0x2d0 [<00000383eaa7c374>] down_read+0x34/0x2d0 [<00000383e99432f8>] do_secure_storage_access+0x108/0x360 [<00000383eaa724b0>] __do_pgm_check+0x130/0x220 [<00000383eaa842e4>] pgm_check_handler+0x114/0x160 [<00000383ea47d028>] copy_page_from_iter_atomic+0x128/0x8a0 ([<00000383ea47d016>] copy_page_from_iter_atomic+0x116/0x8a0) [<00000383e9c45eae>] generic_perform_write+0x16e/0x310 [<00000383e9eb87f4>] ext4_buffered_write_iter+0x84/0x160 [<00000383e9da0de4>] vfs_write+0x1c4/0x460 [<00000383e9da123c>] ksys_write+0x7c/0x100 [<00000383eaa7284e>] __do_syscall+0x15e/0x280 [<00000383eaa8417e>] system_call+0x6e/0x90 INFO: lockdep is turned off. It is not allowed to take the mmap_lock while in atomic context. Therefore handle such a secure storage access fault as if the accessed page is not mapped: the uaccess function will return -EFAULT, and the caller has to deal with this. Usually this means that the access is retried in process context, which allows to resolve the page fault (or in this case export the page). | medium |
| CVE-2025-38358 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between async reclaim worker and close_ctree() Syzbot reported an assertion failure due to an attempt to add a delayed iput after we have set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state: WARNING: CPU: 0 PID: 65 at fs/btrfs/inode.c:3420 btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Modules linked in: CPU: 0 UID: 0 PID: 65 Comm: kworker/u8:4 Not tainted 6.15.0-next-20250530-syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Workqueue: btrfs-endio-write btrfs_work_helper RIP: 0010:btrfs_add_delayed_iput+0x2f8/0x370 fs/btrfs/inode.c:3420 Code: 4e ad 5d (...) RSP: 0018:ffffc9000213f780 EFLAGS: 00010293 RAX: ffffffff83c635b7 RBX: ffff888058920000 RCX: ffff88801c769e00 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000000 RBP: 0000000000000001 R08: ffff888058921b67 R09: 1ffff1100b12436c R10: dffffc0000000000 R11: ffffed100b12436d R12: 0000000000000001 R13: dffffc0000000000 R14: ffff88807d748000 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff888125c53000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002000000bd038 CR3: 000000006a142000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_put_ordered_extent+0x19f/0x470 fs/btrfs/ordered-data.c:635 btrfs_finish_one_ordered+0x11d8/0x1b10 fs/btrfs/inode.c:3312 btrfs_work_helper+0x399/0xc20 fs/btrfs/async-thread.c:312 process_one_work kernel/workqueue.c:3238 [inline] process_scheduled_works+0xae1/0x17b0 kernel/workqueue.c:3321 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3402 kthread+0x70e/0x8a0 kernel/kthread.c:464 ret_from_fork+0x3fc/0x770 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> This can happen due to a race with the async reclaim worker like this: 1) The async metadata reclaim worker enters shrink_delalloc(), which calls btrfs_start_delalloc_roots() with an nr_pages argument that has a value less than LONG_MAX, and that in turn enters start_delalloc_inodes(), which sets the local variable 'full_flush' to false because wbc->nr_to_write is less than LONG_MAX; 2) There it finds inode X in a root's delalloc list, grabs a reference for inode X (with igrab()), and triggers writeback for it with filemap_fdatawrite_wbc(), which creates an ordered extent for inode X; 3) The unmount sequence starts from another task, we enter close_ctree() and we flush the workqueue fs_info->endio_write_workers, which waits for the ordered extent for inode X to complete and when dropping the last reference of the ordered extent, with btrfs_put_ordered_extent(), when we call btrfs_add_delayed_iput() we don't add the inode to the list of delayed iputs because it has a refcount of 2, so we decrement it to 1 and return; 4) Shortly after at close_ctree() we call btrfs_run_delayed_iputs() which runs all delayed iputs, and then we set BTRFS_FS_STATE_NO_DELAYED_IPUT in the fs_info state; 5) The async reclaim worker, after calling filemap_fdatawrite_wbc(), now calls btrfs_add_delayed_iput() for inode X and there we trigger an assertion failure since the fs_info state has the flag BTRFS_FS_STATE_NO_DELAYED_IPUT set. Fix this by setting BTRFS_FS_STATE_NO_DELAYED_IPUT only after we wait for the async reclaim workers to finish, after we call cancel_work_sync() for them at close_ctree(), and by running delayed iputs after wait for the reclaim workers to finish and before setting the bit. This race was recently introduced by commit 19e60b2a95f5 ("btrfs: add extra warning if delayed iput is added when it's not allowed"). Without the new validation at btrfs_add_delayed_iput(), ---truncated--- | medium |
| CVE-2025-38357 | In the Linux kernel, the following vulnerability has been resolved: fuse: fix runtime warning on truncate_folio_batch_exceptionals() The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80afcfa6 ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]--- | medium |
| CVE-2025-38356 | In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Explicitly exit CT safe mode on unwind During driver probe we might be briefly using CT safe mode, which is based on a delayed work, but usually we are able to stop this once we have IRQ fully operational. However, if we abort the probe quite early then during unwind we might try to destroy the workqueue while there is still a pending delayed work that attempts to restart itself which triggers a WARN. This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] ------------[ cut here ]------------ [ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq [ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710 [ ] RIP: 0010:__queue_work+0x287/0x710 [ ] Call Trace: [ ] delayed_work_timer_fn+0x19/0x30 [ ] call_timer_fn+0xa1/0x2a0 Exit the CT safe mode on unwind to avoid that warning. (cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec) | medium |
| CVE-2025-38355 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Process deferred GGTT node removals on device unwind While we are indirectly draining our dedicated workqueue ggtt->wq that we use to complete asynchronous removal of some GGTT nodes, this happends as part of the managed-drm unwinding (ggtt_fini_early), which could be later then manage-device unwinding, where we could already unmap our MMIO/GMS mapping (mmio_fini). This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes) and this was leading to: [ ] BUG: unable to handle page fault for address: ffffc900058162a0 [ ] #PF: supervisor write access in kernel mode [ ] #PF: error_code(0x0002) - not-present page [ ] Oops: Oops: 0002 [#1] SMP NOPTI [ ] Tainted: [W]=WARN [ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe] [ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe] [ ] Call Trace: [ ] <TASK> [ ] xe_ggtt_clear+0xb0/0x270 [xe] [ ] ggtt_node_remove+0xbb/0x120 [xe] [ ] ggtt_node_remove_work_func+0x30/0x50 [xe] [ ] process_one_work+0x22b/0x6f0 [ ] worker_thread+0x1e8/0x3d Add managed-device action that will explicitly drain the workqueue with all pending node removals prior to releasing MMIO/GSM mapping. (cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391) | high |
| CVE-2025-38354 | In the Linux kernel, the following vulnerability has been resolved: drm/msm/gpu: Fix crash when throttling GPU immediately during boot There is a small chance that the GPU is already hot during boot. In that case, the call to of_devfreq_cooling_register() will immediately try to apply devfreq cooling, as seen in the following crash: Unable to handle kernel paging request at virtual address 0000000000014110 pc : a6xx_gpu_busy+0x1c/0x58 [msm] lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm] Call trace: a6xx_gpu_busy+0x1c/0x58 [msm] (P) devfreq_simple_ondemand_func+0x3c/0x150 devfreq_update_target+0x44/0xd8 qos_max_notifier_call+0x30/0x84 blocking_notifier_call_chain+0x6c/0xa0 pm_qos_update_target+0xd0/0x110 freq_qos_apply+0x3c/0x74 apply_constraint+0x88/0x148 __dev_pm_qos_update_request+0x7c/0xcc dev_pm_qos_update_request+0x38/0x5c devfreq_cooling_set_cur_state+0x98/0xf0 __thermal_cdev_update+0x64/0xb4 thermal_cdev_update+0x4c/0x58 step_wise_manage+0x1f0/0x318 __thermal_zone_device_update+0x278/0x424 __thermal_cooling_device_register+0x2bc/0x308 thermal_of_cooling_device_register+0x10/0x1c of_devfreq_cooling_register_power+0x240/0x2bc of_devfreq_cooling_register+0x14/0x20 msm_devfreq_init+0xc4/0x1a0 [msm] msm_gpu_init+0x304/0x574 [msm] adreno_gpu_init+0x1c4/0x2e0 [msm] a6xx_gpu_init+0x5c8/0x9c8 [msm] adreno_bind+0x2a8/0x33c [msm] ... At this point we haven't initialized the GMU at all yet, so we cannot read the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag accordingly. This means the df->suspended flag does not match the actual devfreq state after initialization and msm_devfreq_get_dev_status() will end up accessing GMU registers, causing the crash. Fix this by setting df->suspended correctly during initialization. Patchwork: https://patchwork.freedesktop.org/patch/650772/ | medium |
| CVE-2025-38353 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix taking invalid lock on wedge If device wedges on e.g. GuC upload, the submission is not yet enabled and the state is not even initialized. Protect the wedge call so it does nothing in this case. It fixes the following splat: [] xe 0000:bf:00.0: [drm] device wedged, needs recovery [] ------------[ cut here ]------------ [] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60 ... [] RIP: 0010:__mutex_lock+0x8a1/0xe60 [] mutex_lock_nested+0x1b/0x30 [] xe_guc_submit_wedge+0x80/0x2b0 [xe] | medium |
| CVE-2025-8155 | A vulnerability has been found in D-Link DCS-6010L 1.15.03 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /vb.htm of the component Management Application. The manipulation of the argument paratest leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. | low |
| CVE-2025-5254 | Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Kron Technologies Kron PAM allows Stored XSS.This issue affects Kron PAM: before 3.7. | medium |
| CVE-2025-5253 | Allocation of Resources Without Limits or Throttling vulnerability in Kron Technologies Kron PAM allows HTTP DoS.This issue affects Kron PAM: before 3.7. | medium |
| CVE-2025-8183 | NULL Pointer Dereference in µD3TN via non-singleton destination Endpoint Identifier allows remote attacker to reliably cause DoS | high |
| CVE-2025-8140 | A vulnerability was found in TOTOLINK A702R 4.0.0-B20230721.1521. It has been declared as critical. This vulnerability affects unknown code of the file /boafrm/formWlanMultipleAP of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2025-8139 | A vulnerability was found in TOTOLINK A702R 4.0.0-B20230721.1521. It has been classified as critical. This affects an unknown part of the file /boafrm/formPortFw of the component HTTP POST Request Handler. The manipulation of the argument service_type leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2023-7306 | The Frontend File Manager Plugin plugin for WordPress is vulnerable to unauthorized loss of data due to a missing capability check on the wpfm_delete_multiple_files() function in all versions up to, and including, 21.5. This makes it possible for unauthenticated attackers to delete arbitrary posts. | high |
| CVE-2025-52914 | An SQL vulnerability has been identified in the Suite Applications Services component of Mitel MiCollab, which if successfully exploited could allow an authenticated attacker to conduct an SQL Injection attack due to insufficient validation of user input.
A successful exploit could allow an attacker to access user provisioning information and execute arbitrary SQL database commands with potential impacts on the confidentiality, integrity, and availability of the system.
The vulnerability severity is rated as high.
Mitel is recommending customers with affected product versions update to the latest release. | No Score |
| CVE-2025-8138 | A vulnerability was found in TOTOLINK A702R 4.0.0-B20230721.1521 and classified as critical. Affected by this issue is some unknown functionality of the file /boafrm/formOneKeyAccessButton of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2025-8137 | A vulnerability has been found in TOTOLINK A702R 4.0.0-B20230721.1521 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /boafrm/formIpQoS of the component HTTP POST Request Handler. The manipulation of the argument mac leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2025-8136 | A vulnerability, which was classified as critical, was found in TOTOLINK A702R 4.0.0-B20230721.1521. Affected is an unknown function of the file /boafrm/formFilter of the component HTTP POST Request Handler. The manipulation of the argument ip6addr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2025-8135 | A vulnerability, which was classified as critical, has been found in itsourcecode Insurance Management System 1.0. This issue affects some unknown processing of the file /updateAgent.php. The manipulation of the argument agent_id leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | low |
| CVE-2025-5835 | The Droip plugin for WordPress is vulnerable to unauthorized modification and access of data due to a missing capability check on the droip_post_apis() function in all versions up to, and including, 2.2.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to perform many actions as the AJAX hooks to several functions. Some potential impacts include arbitrary post deletion, arbitrary post creation, post duplication, settings update, user manipulation, and much more. | high |
| CVE-2025-5831 | The Droip plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the make_google_font_offline() function in all versions up to, and including, 2.2.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. | high |
| CVE-2025-8134 | A vulnerability classified as critical was found in PHPGurukul BP Monitoring Management System 1.0. This vulnerability affects unknown code of the file /bwdates-report-result.php. The manipulation of the argument fromdate/todate leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | low |
| CVE-2025-8133 | A vulnerability classified as critical has been found in yanyutao0402 ChanCMS up to 3.1.2. This affects the function getArticle of the file app/modules/api/service/gather.js. The manipulation of the argument targetUrl leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.3 is able to address this issue. The identifier of the patch is 3ef58a50e8b3c427b03c8cf3c9e19a79aa809be6. It is recommended to upgrade the affected component. | low |
| CVE-2025-7022 | The My Reservation System WordPress plugin through 2.3 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin. | medium |
| CVE-2025-8132 | A vulnerability was found in yanyutao0402 ChanCMS up to 3.1.2. It has been rated as critical. Affected by this issue is the function delfile of the file app/extend/utils.js. The manipulation leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.1.3 is able to address this issue. The name of the patch is c8a282bf02a62b59ec60b4699e91c51aff2ee9cd. It is recommended to upgrade the affected component. | low |
| CVE-2025-8131 | A vulnerability was found in Tenda AC20 16.03.08.05. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | high |
| CVE-2025-8129 | A vulnerability, which was classified as problematic, was found in KoaJS Koa up to 3.0.0. Affected is the function back in the library lib/response.js of the component HTTP Header Handler. The manipulation of the argument Referrer leads to open redirect. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | low |
| CVE-2025-8128 | A vulnerability, which was classified as critical, has been found in zhousg letao up to 7d8df0386a65228476290949e0413de48f7fbe98. This issue affects some unknown processing of the file routes\bf\product.js. The manipulation of the argument pictrdtz leads to unrestricted upload. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. | low |
| CVE-2025-8127 | A vulnerability classified as critical was found in deerwms deer-wms-2 up to 3.3. This vulnerability affects unknown code of the file /system/user/list. The manipulation of the argument params[dataScope] leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | low |
| CVE-2025-54568 | Akamai Rate Control alpha before 2025 allows attackers to send requests above the stipulated thresholds because the rate is measured separately for each edge node. | low |
| CVE-2025-8126 | A vulnerability classified as critical has been found in deerwms deer-wms-2 up to 3.3. This affects an unknown part of the file /system/user/export. The manipulation of the argument params[dataScope] leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. | low |
| CVE-2025-54567 | hw/pci/pcie_sriov.c in QEMU through 10.0.3 mishandles the VF Enable bit write mask, a related issue to CVE-2024-26327. | medium |
| CVE-2025-54566 | hw/pci/pcie_sriov.c in QEMU through 10.0.3 has a migration state inconsistency, a related issue to CVE-2024-26327. | medium |
