| CVE-2026-98002 | In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do. | high | 2026-09-25 |
| CVE-2026-98001 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. ltc428_clk_provider_setup() does not fill in any parent clocks, and assumes that init.num_parents is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | medium | 2026-09-25 |
| CVE-2026-98000 | In the Linux kernel, the following vulnerability has been resolved: hwmon: Fix potential UAF in pec_store Sashiko reports: In pec_store(), a guard(mutex)(&hwdev->lock) is taken. If the chip write operation returns an error other than -EOPNOTSUPP, the code jumps to the put label, which calls put_device(hdev). If this drops the final reference, the device is freed. When the function then returns, the guard cleanup function runs and attempts to unlock the freed mutex. Use scoped_guard() instead of guard() to avoid the problem. | high | 2026-09-25 |
| CVE-2026-97998 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0 | medium | 2026-10-03 |
| CVE-2026-97997 | In the Linux kernel, the following vulnerability has been resolved: virtio_ring: fix stale descriptor flags after a failed packed add In a packed ring the AVAIL and USED bits sit in the descriptor itself, so writing them makes that descriptor available. Those bit combinations flip meaning on every round of the ring, tracked by a wrap counter, so invalidating or validating a descriptor means inverting both bits. Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has virtqueue_add_packed() make every descriptor of a chain available as it maps the chain, and write the head last. The device consumes the ring in order and stops at a head that is not available yet, so it never reaches the rest. When vring_map_one_sg() fails partway, unmap_release unmaps the segments and restores avail_used_flags, but the descriptors it wrote to in the ring stay marked with AVAIL and USED bits. The head is now the only entry that keeps the device from consuming these stale entries. For example, the ring would look like this now. Z - pre-previous command A - previous command B - aborted command C - current command [A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE] When the driver now attempts to issue the C command, the next add starts at the same head as B. If C spans less descriptors than B, there is no end marker because AVAIL and USED bits were still in place. And that means the device will start interpreting these stale entries (B2/B3) as another command entry, which then blocks the queue. This effect typically happens in swiotlb configurations under memory pressure, because vring_map_one_sg() can then fail with larger I/O requests which then leads to command abortions. There are broadly 2 ways to avoid leaving those flags behind: 1) Defer those flags too until the chain is complete. 2) Rewrite those flags for the previous wrap counter. Implement the second option in both packed add paths. The first option traverses the chain a second time on every successful add. The second option invalidates all added descriptors when any add fails. With this patch applied, a packed virtqueue keeps completing requests after a failed add. | high | 2026-09-25 |
| CVE-2026-97996 | In the Linux kernel, the following vulnerability has been resolved: virtio: fix use-after-free in unregister_virtio_device() device_unregister() is device_del() plus put_device(). When the caller holds no extra reference, that drops the last one and runs the release callback, which for several transports frees the memory the embedded struct virtio_device sits in. unregister_virtio_device() then calls virtio_debug_device_exit(), which reads dev->debugfs_dir out of the freed object. Affected transports are the ones whose release callback frees and whose remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml, mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because virtio_pci_remove() brackets the call with get_device() and put_device(). Remove the debugfs entries before the device can go away. They are only accessed through the protected debugfs interface, so debugfs_remove_recursive() waits for in-progress file operations before returning. Tearing them down while the device is still alive is therefore safe. Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG by unbinding a virtio-uml device: BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d Read of size 8 at addr 00000000616e0b10 by task init/1 __asan_report_load8_noabort virtio_debug_device_exit+0x36/0x4d unregister_virtio_device+0x48/0x75 virtio_uml_remove platform_remove device_release_driver_internal unbind_store Freed by task 1: kfree virtio_uml_release_dev device_release kobject_put put_device device_unregister With this applied, the report is gone and unbind is clean. | high | 2026-09-25 |
| CVE-2026-97995 | In the Linux kernel, the following vulnerability has been resolved: virtio_console: do not free control-out buffers on remove __send_control_msg() publishes &portdev->cpkt as the control-out virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover cookies to free_buf(), which treats them as struct port_buffer and reads sgpages. If a control message is still on c_ovq when the device is unbound, free_buf() reads past the ports_device object. KASAN reported slab-out-of-bounds in free_buf(): free_buf remove_vqs virtcons_remove unbind_store The object was the ports_device allocated in virtcons_probe(). Drain c_ovq without freeing. The packet lives in portdev and is released with it. | high | 2026-10-03 |
| CVE-2026-97994 | In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter Read of size 16 copy_from_iotlb copydesc_iotlb vringh_getdesc_iotlb vdpasim_net_work Cache get_vq_num_max() immediately after reset. Some backends derive it from writable queue-size state, so querying it after SET_NUM may return the current size instead of the device capability. Invalidate the cached value before reset so a failed reset leaves SET_NUM disabled. For VHOST_SET_VRING_NUM, copy the complete vring state once and use the same index and size for validation, vq->num, and set_vq_num(). This ensures that validation and use operate on the same copied values. | medium | 2026-10-03 |
| CVE-2026-97993 | In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: don't install the eventfd_ctx_fdget() error in config_ctx vhost_vdpa_set_config_call() swaps the eventfd_ctx_fdget() return value into v->config_ctx before checking it, so on failure the field briefly holds an ERR_PTR: ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd); swap(ctx, v->config_ctx); if (!IS_ERR_OR_NULL(ctx)) eventfd_ctx_put(ctx); if (IS_ERR(v->config_ctx)) { long ret = PTR_ERR(v->config_ctx); v->config_ctx = NULL; return ret; } Commit 0bde59c1723a ("vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails") added that clearing, and spelled out the invariant the rest of the file relies on: "we consider 'v->config_ctx' valid if it is not NULL". The window between the swap and the clearing still breaks it. vhost_vdpa_config_cb() only tests for NULL, so a config interrupt delivered inside the window hands the ERR_PTR to eventfd_signal(). Check the fd before installing it instead. That closes the window and matches how vhost_vring_ioctl() handles the same failure for the vq call fd. It also stops a rejected fd from tearing down a config interrupt that was working: until now the swap replaced the live context and put it, so after an EBADF the device silently stopped delivering config interrupts until userspace installed a new fd. | medium | 2026-10-03 |
| CVE-2026-97992 | In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation. | high | 2026-09-25 |
| CVE-2026-97991 | In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance. | high | 2026-10-03 |
| CVE-2026-97990 | In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance. | high | 2026-10-03 |
| CVE-2026-97989 | In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | medium | 2026-09-25 |
| CVE-2026-97988 | In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero. | medium | 2026-09-25 |
| CVE-2026-97987 | In the Linux kernel, the following vulnerability has been resolved: virtio_input: reset device if input_register_device() fails Probe marks the device DRIVER_OK with virtio_device_ready() before calling input_register_device(). If registration fails, the error path cleared vi->ready and called del_vqs() while the device was still live, so the device could keep DMA to queues that were already torn down. Match remove/freeze: call virtio_reset_device() on that path before tearing down the virtqueues. | medium | 2026-10-03 |
| CVE-2026-97986 | In the Linux kernel, the following vulnerability has been resolved: virtio_input: stop callbacks before unregistering input device virtinput_remove() unregisters the input device before resetting the virtio device. virtinput_recv_events() drops vi->lock around input_event(), so clearing vi->ready does not stop a callback that passed the entry check. It can still use vi->idev, requeue buffers and kick the queue. Reset first, as virtinput_freeze() already does. With the preceding core change, reset waits for callbacks before input_unregister_device() can free vi->idev. Recheck vi->ready after taking the lock again: keep draining completed events so an input packet is not truncated, but stop requeueing buffers and kicking the queue. With evdev attached, input_unregister_handle() currently waits for an RCU grace period, which also waits out IRQ callbacks. This masks the lifetime bug on PCI and MMIO, but does not protect sleepable callbacks on other transports. | medium | 2026-10-03 |
| CVE-2026-97985 | In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0], "a", 1, MSG_OOB); recv(sk[1], buf, 0, MSG_OOB); send(sk[0], "b", 1, MSG_OOB); recv(sk[1], buf, 1, MSG_PEEK); Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer, or non-OOB skb is not yet consumed), and unix_stream_data_wait() is called. However, it returns immediately because @last is not updated in unix_stream_read_generic(), and the thread busy-waits for a new skb. Let's update @last in manage_oob(). For MSG_PEEK, @last is updated with the skipped OOB, and for the non-peek case, @last matches the returned value (when !copied) because OOB is unlinked. Note that manage_oob() is inlined and no stack canary is added. | medium | 2026-09-25 |
| CVE-2026-97984 | In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip6_append_data, rather than to IP6_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of IPv6 header). Device MTU allows it (it's only one byte bigger than IP6_MAX_MTU, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit the change to UDP sockets only. The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to predate git history (verified reproduction on 2.6.21), was fixed later, and then reappeared in commit 427faee167bc ("net: ipv6: introduce ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). | critical | 2026-10-03 |
| CVE-2026-97983 | In the Linux kernel, the following vulnerability has been resolved: vduse: return compat ioctl results directly The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but then calls the native handler. Their different command sizes make native dispatch return -ENOIOCTLCMD. For GET_FD, this overwrites receive_fd()'s return value after the descriptor is installed, leaking one fd per call. Return handled compat results directly and use native dispatch only for other commands. | high | 2026-09-25 |
| CVE-2026-97982 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Fix budget accounting The gmac_rx() function returns the remaining NAPI budget, but its caller treats the return value as the number of packets received. An idle poll therefore reports a full budget and remains scheduled. Return the number of received packets instead. Preserve the existing free queue refill accounting by adding that count directly; continuing to subtract it from the budget would invert the refill behavior. | medium | 2026-10-03 |
| CVE-2026-97981 | In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Count dropped frames as NAPI work The RX loop only consumes budget when it successfully delivers a frame. Error paths keep consuming descriptors without reducing the budget, so a stream of bad frames can process the entire receive ring in one poll. Move the budget accounting to a common end-of-frame path. This counts each completed frame as NAPI work whether it was delivered or dropped, matching the behavior of the vendor driver. | medium | 2026-10-03 |
| CVE-2026-97980 | In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_set_level() Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter") incorrectly removed a null-id check from debug_set_level(), introducing a possible NULL pointer dereference for debug-API users that put debug_register() results unchecked into debug_set_level(). Fix this by moving the check from the internal _debug_set_level() variant back to the external debug_set_level() wrapper. | medium | 2026-09-25 |
| CVE-2026-97979 | In the Linux kernel, the following vulnerability has been resolved: ice: add missing xa_destroy for sched_node_ids Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node") added a sched_node_ids xarray to the port info structure, but never called xa_destroy on it. Since xarrays can allocate internal memory, this can result in a memory leak even if every element in the xarray has been removed. The xarray is currently embedded in the port_info structure. This appears to have been done because its use is within functions that take the port_info as a primary argument. However, this complicates managing the lifecycle of the field. The port_info structure is allocated in ice_init_hw() using devm, and it is not released until the devm cleanup when the driver is unloaded. The ice_init_hw() function is called in many places, including devlink reload, and possibly during DDP load after updating the Tx scheduler layout. Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise multiple concerns due to potential ordering issues and possible ways that port_info could be a dangling reference. To handle this, move the sched_node_ids out of port_info and into the hw structure. All users of the array already have a pointer to hw anyways, and there is only one sched_node_ids per adapter. While here, remove the overly verbose comment explaining the nature of the sched_node_ids xarray. Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(), ensuring that we properly release the xarray memory. This was caught by Sashiko during development of unrelated code. | medium | 2026-10-03 |
| CVE-2026-97978 | In the Linux kernel, the following vulnerability has been resolved: eth: ice: don't dereference pointers from TP_printk() After forwarding net-next during the v7.3 merge window we started seeing: TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b this is due to extra checks added in tracing subsystem in commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()"). Printing happens long after the event was recorded, by which point the pointers may be invalid (the ring or the dim instance). Copy the eight scalars into the event instead. | medium | 2026-09-25 |
| CVE-2026-97977 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has to happen after btusb_stop_traffic(), otherwise an URB completion racing with the cancel can requeue the work right after it has been waited for. | medium | 2026-10-03 |
| CVE-2026-97976 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate packet_len before skb_put_data btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without checking if it exceeds the RX buffer size. An oversized packet_len can lead to an out-of-bounds read in skb_put_data(). Validate packet_len to ensure it is non-zero and does not exceed BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when invalid. This issue was reported by Claude Mythos. It can be simulated either by using customized firmware configured to return an invalid packet_len or by modifying rfh_hdr->packet_len in the driver before calling btintel_pcie_submit_rx_work(). | medium | 2026-09-25 |
| CVE-2026-97975 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | medium | 2026-09-25 |
| CVE-2026-97974 | In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669 rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800 __sock_sendmsg net/socket.c:815 [inline] ____sys_sendmsg+0x565/0x870 net/socket.c:2713 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2767 __sys_sendmsg net/socket.c:2799 [inline] __do_sys_sendmsg net/socket.c:2804 [inline] __se_sys_sendmsg net/socket.c:2802 [inline] __x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899 | medium | 2026-09-25 |
| CVE-2026-97973 | In the Linux kernel, the following vulnerability has been resolved: net: macb: destroy the phylink instance on the probe error path macb_mii_init() creates a phylink instance on both of its success paths, but the probe unwind frees the netdev without destroying it, so a failing macb_alloc_tieoff() or register_netdev() leaks the instance. Destroy it at err_out_unregister_mdio, which is only reachable once macb_mii_init() has succeeded, so bp->phylink is valid there. | medium | 2026-10-03 |
| CVE-2026-97972 | In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the reference returned by of_get_child_by_name() for macb_mdiobus_register() and drops it only on the error paths, so every successful probe leaks a node reference. On a CM5, overlay removal after four bind cycles reports OF: ERROR: memory leak, expected refcount 1 instead of 5 Drop the reference after registration, where __mdiobus_register() has already taken its own for the lifetime of the bus. | medium | 2026-09-25 |
| CVE-2026-97971 | In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 exp_funnel_lock+0xb2/0x260 synchronize_rcu_expedited+0xe7/0x220 namespace_unlock+0x26a/0x320 put_mnt_ns+0xd3/0x120 mntns_put+0xe/0x20 do_listns+0x13e/0x560 __do_sys_listns+0x126/0x2d0 __x64_sys_listns+0x20/0x30 x64_sys_call+0x2366/0x2390 do_syscall_64+0x105/0x5a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> | high | 2026-09-25 |
| CVE-2026-97970 | In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | medium | 2026-10-03 |
| CVE-2026-97969 | In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`. | medium | 2026-10-03 |
| CVE-2026-97968 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | medium | 2026-09-25 |
| CVE-2026-97967 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns. | medium | 2026-09-25 |
| CVE-2026-97966 | In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one(). | high | 2026-10-03 |
| CVE-2026-97965 | In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | high | 2026-09-25 |
| CVE-2026-97964 | In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient headroom and a writable header. | high | 2026-10-03 |
| CVE-2026-97963 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs during __stmmac_open(). However, the lock is also used while the interface is down and has never been opened: tc_taprio_configure() invokes the PTP gettime64() callback to compute the EST base time when offloading a TAPRIO schedule, and stmmac_get_time() takes priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour. Move the rwlock_init() to __stmmac_dvr_probe(), together with the other private locks, so that ptp_lock is always valid regardless of the interface state. | high | 2026-10-03 |
| CVE-2026-97962 | In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are already serialized by the devlink instance lock, and store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the reporter priv since the diagnose callback only needs a device handle and a vport number, and mlx5_vport carries both and is initialized before any representor driver probes. | high | 2026-09-25 |
| CVE-2026-97961 | In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | high | 2026-09-25 |
| CVE-2026-97960 | In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_pebs_buffer() call, preventing reentry. Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is not disabled. | medium | 2026-09-25 |
| CVE-2026-97959 | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existing filter to a different top-level bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/ FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so for an existing filter the new handle may differ from the old one and land in a different bucket. When this happens, the filter is unlinked from the old bucket, but the bucket itself is never freed once it goes empty. The stale empty bucket remains in head->table[], causing route4_delete to report *last=false even after the last live filter is gone. That pins the empty tcf_proto and causes a leak. Fix this by refcounting the filters linked to a bucket and freeing the bucket when the count drops to zero. The existing scan in route4_delete goes away with it. The count is updated at all sites that link or unlink a filter during add, change and delete, and the bucket is dropped from head->table[] as soon as it reaches zero. Conditions to recreate the bug: CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y. tc qdisc replace dev lo clsact tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1 tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \ route from 1 to 2 tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \ route from 1 to 2 tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' | high | 2026-10-03 |
| CVE-2026-97958 | In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:615) ? skb_release_data (net/core/skbuff.c:1122) ? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232) ? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499) ? tc_chain_notify (net/sched/cls_api.c:3045) ? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041) ? netlink_unicast (net/netlink/af_netlink.c:1335) ? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985) ? tc_ctl_chain (net/sched/cls_api.c:3242) ? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146) ? netlink_unicast (net/netlink/af_netlink.c:1354) ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177) ? netlink_rcv_skb (net/netlink/af_netlink.c:2556) ? netlink_unicast (net/netlink/af_netlink.c:1319) ? netlink_sendmsg (net/netlink/af_netlink.c:1900) ? __sock_sendmsg (net/socket.c:800) ? __sys_sendto (net/socket.c:2281) ? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284) ? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) ? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> | medium | 2026-10-03 |
| CVE-2026-97957 | In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver. | high | 2026-10-03 |
| CVE-2026-97956 | In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling fix of commit b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register"). There is netdev_lock_ops() in the upper callers, so using netif_open() instead of dev_open(). Call Trace: __schedule+0x2bb/0x650 schedule+0x27/0xb0 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_open+0x3b/0xe0 net_failover_slave_name_change+0x22/0x40 failover_event+0xd4/0x1e0 notifier_call_chain+0x62/0xf0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x50/0x80 netif_change_name+0x200/0x330 do_setlink.isra.0+0xb12/0xdf0 ? security_capable+0x9a/0x1e0 ? ns_capable+0x31/0x60 rtnl_setlink+0x302/0x670 ? netlink_recvmsg+0x296/0x340 ? security_capable+0x9a/0x1e0 ? __pfx_rtnl_setlink+0x10/0x10 rtnetlink_rcv_msg+0x384/0x460 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x61/0x120 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x28f/0x3c0 netlink_sendmsg+0x216/0x450 __sys_sendto+0x222/0x230 __x64_sys_sendto+0x24/0x40 x64_sys_call+0x1d5d/0x2390 do_syscall_64+0x105/0x5a0 ? do_syscall_64+0x140/0x5a0 ? exc_page_fault+0x94/0x1e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | high | 2026-09-25 |
| CVE-2026-97955 | In the Linux kernel, the following vulnerability has been resolved: net: mana: restore the XDP program pointer when pre-allocation fails mana_xdp_set() publishes the new program into apc->bpf_prog before it allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers from it via mana_get_rxbuf_cfg(). When that allocation fails the function returns the error directly, skipping the err_dealloc_rxbuffs label which is the only place that restores the previous pointer. The attach is reported as failed, so the BPF core drops the reference it held for the caller and the program can be freed, while apc->bpf_prog still points at it. The next consumer of mana_xdp_get() - typically mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or after a TX timeout reset - then calls bpf_prog_add() on freed memory. This is reachable from an ordinary "ip link set dev ethX xdp obj ..." whenever the per-queue RX buffer pre-allocation cannot be satisfied. Restore the previous program on that error path. | medium | 2026-09-25 |
| CVE-2026-97954 | In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SIZE bytes to every scatterlist entry, even when total_len ends in a partial page. The RDS congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE greater than 8192 the scatterlist maps bytes beyond the end of the congestion map. RDS-TCP transmits the SG contents according to those lengths, so the extra bytes become part of the TCP RDS stream and are interpreted as subsequent RDS message headers, corrupting the stream. Limit the final scatterlist mapping to the number of bytes remaining. This has no effect on systems with a 4K page size and allows RDS-TCP to be used on systems with 16K and larger page sizes. The RDS selftest, which previously hung on 16K pages, now passes. | medium | 2026-10-03 |
| CVE-2026-97953 | In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check. | high | 2026-09-25 |
| CVE-2026-97952 | In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the request's pages into the LDC channel's map table (ldc_map_sg()), fills in the descriptor and marks it VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger(). When the trigger fails, the error path only prints a message: the descriptor stays READY and the cookies are never unmapped. The mapping is normally released in vdc_end_one() when the peer completes the descriptor - but a descriptor whose doorbell was never sent will never complete, and since dr->prod is not advanced on failure, the reset path (vdc_requeue_inflight(), which walks [cons, prod)) never visits it either. The map table entries are leaked permanently. Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") trigger failures occur in practice under load, so every resulting I/O error also leaks one request's worth of entries from the fixed-size (8192 entries per channel) map table. Because the allocator hands out contiguous ranges, fragmentation makes large multi-segment requests fail first as the table drains, until ldc_map_sg() fails permanently and the disk is dead until reboot. It also makes any retry-based recovery unusable: requeuing the request on -EAGAIN remaps the pages on every attempt, overwriting desc->cookies and orphaning the previous mapping, so the table drains at the retry rate. This is the memory exhaustion observed when the requeue approach was first tested in October 2025. Roll back on failure: unmap the cookies, mark the descriptor FREE again and clear the request entry. If the trigger failed with -ENOTCONN, __vdc_tx_trigger() has already reset the port, which tears down and reallocates both the dring and the LDC channel including its map table - nothing to roll back, and the stale descriptor must not be touched. | medium | 2026-10-03 |
