In the Linux kernel, the following vulnerability has been resolved: RISC-V: Make port I/O string accessors actually work Fix port I/O string accessors such as `insb', `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access fault: Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc : parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000 status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8 [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>] ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2 ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the physical address requested in the respective wrapper macros only, observing that the raw accessors such as `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long' that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in separate changes given that current code is gravely broken and does not ever work.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-013786 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    RISC-V: Make port I/O string accessors actually work

    Fix port I/O string accessors such as `insb', `outsb', etc. which use     the physical PCI port I/O address rather than the corresponding memory     mapping to get at the requested location, which in turn breaks at least     accesses made by our parport driver to a PCIe parallel port such as:

    PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20     parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

    causing a memory access fault:

    Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008     Oops [#1]     Modules linked in:
    CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23     Hardware name: SiFive HiFive Unmatched A00 (DT)     epc : parport_pc_fifo_write_block_pio+0x266/0x416      ra : parport_pc_fifo_write_block_pio+0xb4/0x416     epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60      gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000      t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0      s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000      a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb      a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000      s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50      s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000      s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000      s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930      t5 : 0000000000001000 t6 : 0000000000040000     status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f     [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200     [<ffffffff8053bbc0>] parport_write+0x46/0xf8     [<ffffffff8050530e>] lp_write+0x158/0x2d2     [<ffffffff80185716>] vfs_write+0x8e/0x2c2     [<ffffffff80185a74>] ksys_write+0x52/0xc2     [<ffffffff80185af2>] sys_write+0xe/0x16     [<ffffffff80003770>] ret_from_syscall+0x0/0x2
    ---[ end trace 0000000000000000 ]---

    For simplicity address the problem by adding PCI_IOBASE to the physical     address requested in the respective wrapper macros only, observing that     the raw accessors such as `__insb', `__outsb', etc. are not supposed to     be used other than by said macros.  Remove the cast to `long' that is no     longer needed on `addr' now that it is used as an offset from PCI_IOBASE     and add parentheses around `addr' needed for predictable evaluation in     macro expansion.  No need to make said adjustments in separate changes     given that current code is gravely broken and does not ever work.

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-011166 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    RISC-V: Make port I/O string accessors actually work

    Fix port I/O string accessors such as `insb', `outsb', etc. which use     the physical PCI port I/O address rather than the corresponding memory     mapping to get at the requested location, which in turn breaks at least     accesses made by our parport driver to a PCIe parallel port such as:

    PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20     parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

    causing a memory access fault:

    Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008     Oops [#1]     Modules linked in:
    CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23     Hardware name: SiFive HiFive Unmatched A00 (DT)     epc : parport_pc_fifo_write_block_pio+0x266/0x416      ra : parport_pc_fifo_write_block_pio+0xb4/0x416     epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60      gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000      t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0      s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000      a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb      a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000      s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50      s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000      s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000      s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930      t5 : 0000000000001000 t6 : 0000000000040000     status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f     [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200     [<ffffffff8053bbc0>] parport_write+0x46/0xf8     [<ffffffff8050530e>] lp_write+0x158/0x2d2     [<ffffffff80185716>] vfs_write+0x8e/0x2c2     [<ffffffff80185a74>] ksys_write+0x52/0xc2     [<ffffffff80185af2>] sys_write+0xe/0x16     [<ffffffff80003770>] ret_from_syscall+0x0/0x2
    ---[ end trace 0000000000000000 ]---

    For simplicity address the problem by adding PCI_IOBASE to the physical     address requested in the respective wrapper macros only, observing that     the raw accessors such as `__insb', `__outsb', etc. are not supposed to     be used other than by said macros.  Remove the cast to `long' that is no     longer needed on `addr' now that it is used as an offset from PCI_IOBASE     and add parentheses around `addr' needed for predictable evaluation in     macro expansion.  No need to make said adjustments in separate changes     given that current code is gravely broken and does not ever work.

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2026-007480 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    RISC-V: Make port I/O string accessors actually work

    Fix port I/O string accessors such as `insb', `outsb', etc. which use     the physical PCI port I/O address rather than the corresponding memory     mapping to get at the requested location, which in turn breaks at least     accesses made by our parport driver to a PCIe parallel port such as:

    PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20     parport0: PC-style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]

    causing a memory access fault:

    Unable to handle kernel access to user memory without uaccess routines at virtual address 0000000000001008     Oops [#1]     Modules linked in:
    CPU: 1 PID: 350 Comm: cat Not tainted 6.0.0-rc2-00283-g10d4879f9ef0-dirty #23     Hardware name: SiFive HiFive Unmatched A00 (DT)     epc : parport_pc_fifo_write_block_pio+0x266/0x416      ra : parport_pc_fifo_write_block_pio+0xb4/0x416     epc : ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60      gp : ffffffff80fa2700 tp : ffffffd882b1e900 t0 : ffffffd883d0b000      t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0      s1 : 0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000      a2 : ffffffd883d0a010 a3 : 0000000000000023 a4 : 00000000ffff8fbb      a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000      s2 : ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50      s5 : 0000000000001008 s6 : 0000000000000008 s7 : ffffffd883d0a000      s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000      s11: 0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930      t5 : 0000000000001000 t6 : 0000000000040000     status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f     [<ffffffff80543212>] parport_pc_compat_write_block_pio+0xfe/0x200     [<ffffffff8053bbc0>] parport_write+0x46/0xf8     [<ffffffff8050530e>] lp_write+0x158/0x2d2     [<ffffffff80185716>] vfs_write+0x8e/0x2c2     [<ffffffff80185a74>] ksys_write+0x52/0xc2     [<ffffffff80185af2>] sys_write+0xe/0x16     [<ffffffff80003770>] ret_from_syscall+0x0/0x2
    ---[ end trace 0000000000000000 ]---

    For simplicity address the problem by adding PCI_IOBASE to the physical     address requested in the respective wrapper macros only, observing that     the raw accessors such as `__insb', `__outsb', etc. are not supposed to     be used other than by said macros.  Remove the cast to `long' that is no     longer needed on `addr' now that it is used as an offset from PCI_IOBASE     and add parentheses around `addr' needed for predictable evaluation in     macro expansion.  No need to make said adjustments in separate changes     given that current code is gravely broken and does not ever work.

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - RISC-V: Make port I/O string accessors actually work Fix port I/O string accessors such as `insb',     `outsb', etc. which use the physical PCI port I/O address rather than the corresponding memory mapping to     get at the requested location, which in turn breaks at least accesses made by our parport driver to a PCIe     parallel port such as: PCI parallel port detected: 1415:c118, I/O at 0x1000(0x1008), IRQ 20 parport0: PC-     style at 0x1000 (0x1008), irq 20, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] causing a memory access     fault: Unable to handle kernel access to user memory without uaccess routines at virtual address     0000000000001008 Oops [#1] Modules linked in: CPU: 1 PID: 350 Comm: cat Not tainted     6.0.0-rc2-00283-g10d4879f9ef0-dirty #23 Hardware name: SiFive HiFive Unmatched A00 (DT) epc :
    parport_pc_fifo_write_block_pio+0x266/0x416 ra : parport_pc_fifo_write_block_pio+0xb4/0x416 epc :
    ffffffff80542c3e ra : ffffffff80542a8c sp : ffffffd88899fc60 gp : ffffffff80fa2700 tp : ffffffd882b1e900     t0 : ffffffd883d0b000 t1 : ffffffffff000002 t2 : 4646393043330a38 s0 : ffffffd88899fcf0 s1 :
    0000000000001000 a0 : 0000000000000010 a1 : 0000000000000000 a2 : ffffffd883d0a010 a3 : 0000000000000023     a4 : 00000000ffff8fbb a5 : ffffffd883d0a001 a6 : 0000000100000000 a7 : ffffffc800000000 s2 :
    ffffffffff000002 s3 : ffffffff80d28880 s4 : ffffffff80fa1f50 s5 : 0000000000001008 s6 : 0000000000000008     s7 : ffffffd883d0a000 s8 : 0004000000000000 s9 : ffffffff80dc1d80 s10: ffffffd8807e4000 s11:
    0000000000000000 t3 : 00000000000000ff t4 : 393044410a303930 t5 : 0000000000001000 t6 : 0000000000040000     status: 0000000200000120 badaddr: 0000000000001008 cause: 000000000000000f [<ffffffff80543212>]     parport_pc_compat_write_block_pio+0xfe/0x200 [<ffffffff8053bbc0>] parport_write+0x46/0xf8     [<ffffffff8050530e>] lp_write+0x158/0x2d2 [<ffffffff80185716>] vfs_write+0x8e/0x2c2 [<ffffffff80185a74>]     ksys_write+0x52/0xc2 [<ffffffff80185af2>] sys_write+0xe/0x16 [<ffffffff80003770>] ret_from_syscall+0x0/0x2
    ---[ end trace 0000000000000000 ]--- For simplicity address the problem by adding PCI_IOBASE to the     physical address requested in the respective wrapper macros only, observing that the raw accessors such as     `__insb', `__outsb', etc. are not supposed to be used other than by said macros. Remove the cast to `long'     that is no longer needed on `addr' now that it is used as an offset from PCI_IOBASE and add parentheses     around `addr' needed for predictable evaluation in macro expansion. No need to make said adjustments in     separate changes given that current code is gravely broken and does not ever work. (CVE-2022-50647)

Note that Nessus relies on the presence of the package as reported by the vendor.

An update of the linux package has been released.

ID	Name	Product	Family	Severity
309226	Unity Linux 20.1070a Security Update: kernel (UTSA-2026-013786)	Nessus	Unity Linux Local Security Checks	medium
308807	Unity Linux 20.1050e / 20.1060e / 20.1070e Security Update: kernel (UTSA-2026-011166)	Nessus	Unity Linux Local Security Checks	medium
307069	Unity Linux 20.1050e / 20.1060e / 20.1070e Security Update: kernel (UTSA-2026-007480)	Nessus	Unity Linux Local Security Checks	medium
278322	Linux Distros Unpatched Vulnerability : CVE-2022-50647	Nessus	Misc.	medium
151965	Photon OS 4.0: Linux PHSA-2021-4.0-0065	Nessus	PhotonOS Local Security Checks	high

Detections

Analytics

CVE-2022-50647

medium

Tenable Plugins

medium

medium

medium

medium

high