Spring Security, versions 5.7 prior to 5.7.5 and 5.6 prior to 5.6.9 could be susceptible to authorization rules bypass via forward or include dispatcher types. Specifically, an application is vulnerable when all of the following are true: The application expects that Spring Security applies security to forward and include dispatcher types. The application uses the AuthorizationFilter either manually or via the authorizeHttpRequests() method. The application configures the FilterChainProxy to apply to forward and/or include requests (e.g. spring.security.filter.dispatcher-types = request, error, async, forward, include). The application may forward or include the request to a higher privilege-secured endpoint.The application configures Spring Security to apply to every dispatcher type via authorizeHttpRequests().shouldFilterAllDispatcherTypes(true)

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - Spring Security, versions 5.7 prior to 5.7.5 and 5.6 prior to 5.6.9 could be susceptible to authorization     rules bypass via forward or include dispatcher types. Specifically, an application is vulnerable when all     of the following are true: The application expects that Spring Security applies security to forward and     include dispatcher types. The application uses the AuthorizationFilter either manually or via the     authorizeHttpRequests() method. The application configures the FilterChainProxy to apply to forward and/or     include requests (e.g. spring.security.filter.dispatcher-types = request, error, async, forward, include).
    The application may forward or include the request to a higher privilege-secured endpoint.The application     configures Spring Security to apply to every dispatcher type via     authorizeHttpRequests().shouldFilterAllDispatcherTypes(true) (CVE-2022-31692)

Note that Nessus relies on the presence of the package as reported by the vendor.

The version of AOS installed on the remote host is prior to 6.8.1. It is, therefore, affected by multiple vulnerabilities as referenced in the NXSA-AOS-6.8.1 advisory.

  - There is a carry propagation bug in the MIPS32 and MIPS64 squaring procedure. Many EC algorithms are     affected, including some of the TLS 1.3 default curves. Impact was not analyzed in detail, because the     pre-requisites for attack are considered unlikely and include reusing private keys. Analysis suggests that     attacks against RSA and DSA as a result of this defect would be very difficult to perform and are not     believed likely. Attacks against DH are considered just feasible (although very difficult) because most of     the work necessary to deduce information about a private key may be performed offline. The amount of     resources required for such an attack would be significant. However, for an attack on TLS to be     meaningful, the server would have to share the DH private key among multiple clients, which is no longer     an option since CVE-2016-0701. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0.0. It was     addressed in the releases of 1.1.1m and 3.0.1 on the 15th of December 2021. For the 1.0.2 release it is     addressed in git commit 6fc1aaaf3 that is available to premium support customers only. It will be made     available in 1.0.2zc when it is released. The issue only affects OpenSSL on MIPS platforms. Fixed in     OpenSSL 3.0.1 (Affected 3.0.0). Fixed in OpenSSL 1.1.1m (Affected 1.1.1-1.1.1l). Fixed in OpenSSL 1.0.2zc-     dev (Affected 1.0.2-1.0.2zb). (CVE-2021-4160)

  - CVE-2023-38545 is a heap-based buffer overflow vulnerability in the SOCKS5 proxy handshake in libcurl and     curl.  When curl is given a hostname to pass along to a SOCKS5 proxy that is greater than 255 bytes in     length, it will switch to local name resolution in order to resolve the address before passing it on to     the SOCKS5 proxy. However, due to a bug introduced in 2020, this local name resolution could fail due to a     slow SOCKS5 handshake, causing curl to pass on the hostname greater than 255 bytes in length into the     target buffer, leading to a heap overflow.  The advisory for CVE-2023-38545 gives an example exploitation     scenario of a malicious HTTPS server redirecting to a specially crafted URL. While it might seem that an     attacker would need to influence the slowness of the SOCKS5 handshake, the advisory states that server     latency is likely slow enough to trigger this bug. (CVE-2023-38545)

  - This flaw makes curl overflow a heap based buffer in the SOCKS5 proxy handshake. When curl is asked to     pass along the host name to the SOCKS5 proxy to allow that to resolve the address instead of it getting     done by curl itself, the maximum length that host name can be is 255 bytes. If the host name is detected     to be longer, curl switches to local name resolving and instead passes on the resolved address only. Due     to this bug, the local variable that means let the host resolve the name could get the wrong value     during a slow SOCKS5 handshake, and contrary to the intention, copy the too long host name to the target     buffer instead of copying just the resolved address there. The target buffer being a heap based buffer,     and the host name coming from the URL that curl has been told to operate with. (CVE-2023-38545)

  - An information disclosure vulnerability exists in curl <v8.1.0 when doing HTTP(S) transfers, libcurl might     erroneously use the read callback (`CURLOPT_READFUNCTION`) to ask for data to send, even when the     `CURLOPT_POSTFIELDS` option has been set, if the same handle previously wasused to issue a `PUT` request     which used that callback. This flaw may surprise the application and cause it to misbehave and either send     off the wrong data or use memory after free or similar in the second transfer. The problem exists in the     logic for a reused handle when it is (expected to be) changed from a PUT to a POST. (CVE-2023-28322)

  - This flaw allows an attacker to insert cookies at will into a running program using libcurl, if the     specific series of conditions are met. libcurl performs transfers. In its API, an application creates     easy handles that are the individual handles for single transfers. libcurl provides a function call that     duplicates en easy handle called     [curl_easy_duphandle](https://curl.se/libcurl/c/curl_easy_duphandle.html). If a transfer has cookies     enabled when the handle is duplicated, the cookie-enable state is also cloned - but without cloning the     actual cookies. If the source handle did not read any cookies from a specific file on disk, the cloned     version of the handle would instead store the file name as `none` (using the four ASCII letters, no     quotes). Subsequent use of the cloned handle that does not explicitly set a source to load cookies from     would then inadvertently load cookies from a file named `none` - if such a file exists and is readable in     the current directory of the program using libcurl. And if using the correct file format of course.
    (CVE-2023-38546)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Redhat Enterprise Linux 7 / 8 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2023:1655 advisory.

    Red Hat OpenShift Container Platform is Red Hat's cloud computing Kubernetes application platform solution     designed for on-premise or private cloud deployments.

    This advisory contains the RPM packages for Red Hat OpenShift Container Platform 4.10.56. See the     following advisory for the container images for this release:

    https://access.redhat.com/errata/RHSA-2023:1656

    Security Fix(es):

    * apache-commons-text: variable interpolation RCE (CVE-2022-42889)

    * spring-security-oauth2-client: Privilege Escalation in spring-security-oauth2-client (CVE-2022-31690)

    * spring-security: Authorization rules can be bypassed via forward or include dispatcher types in Spring     Security (CVE-2022-31692)

    * jenkins-2-plugins/script-security: Sandbox bypass vulnerability in Script Security Plugin     (CVE-2023-24422)

    * Jenkins: XSS vulnerability in plugin manager (CVE-2023-27898)

    * Jenkins: Temporary plugin file created with insecure permissions (CVE-2023-27899)

    * kube-apiserver: Aggregated API server can cause clients to be redirected (SSRF) (CVE-2022-3172)

    * Jenkins: Temporary file parameter created with insecure permissions (CVE-2023-27903)

    * Jenkins: Information disclosure through error stack traces related to agents (CVE-2023-27904)

    For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and     other related information, refer to the CVE page(s) listed in the References section.

Tenable has extracted the preceding description block directly from the Red Hat Enterprise Linux security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote Red Hat Enterprise Linux CoreOS 4 host has packages installed that are affected by multiple vulnerabilities as referenced in the RHSA-2023:1655 advisory.

  - Spring Security, versions 5.7 prior to 5.7.5, and 5.6 prior to 5.6.9, and older unsupported versions could     be susceptible to a privilege escalation under certain conditions. A malicious user or attacker can modify     a request initiated by the Client (via the browser) to the Authorization Server which can lead to a     privilege escalation on the subsequent approval. This scenario can happen if the Authorization Server     responds with an OAuth2 Access Token Response containing an empty scope list (per RFC 6749, Section 5.1)     on the subsequent request to the token endpoint to obtain the access token. (CVE-2022-31690)

  - Spring Security, versions 5.7 prior to 5.7.5 and 5.6 prior to 5.6.9 could be susceptible to authorization     rules bypass via forward or include dispatcher types. Specifically, an application is vulnerable when all     of the following are true: The application expects that Spring Security applies security to forward and     include dispatcher types. The application uses the AuthorizationFilter either manually or via the     authorizeHttpRequests() method. The application configures the FilterChainProxy to apply to forward and/or     include requests (e.g. spring.security.filter.dispatcher-types = request, error, async, forward, include).
    The application may forward or include the request to a higher privilege-secured endpoint.The application     configures Spring Security to apply to every dispatcher type via     authorizeHttpRequests().shouldFilterAllDispatcherTypes(true) (CVE-2022-31692)

  - A security issue was discovered in kube-apiserver that allows an aggregated API server to redirect client     traffic to any URL. This could lead to the client performing unexpected actions as well as forwarding the     client's API server credentials to third parties. (CVE-2022-3172)

  - Apache Commons Text performs variable interpolation, allowing properties to be dynamically evaluated and     expanded. The standard format for interpolation is ${prefix:name}, where prefix is used to locate an     instance of org.apache.commons.text.lookup.StringLookup that performs the interpolation. Starting with     version 1.5 and continuing through 1.9, the set of default Lookup instances included interpolators that     could result in arbitrary code execution or contact with remote servers. These lookups are: - script -     execute expressions using the JVM script execution engine (javax.script) - dns - resolve dns records -     url - load values from urls, including from remote servers Applications using the interpolation defaults     in the affected versions may be vulnerable to remote code execution or unintentional contact with remote     servers if untrusted configuration values are used. Users are recommended to upgrade to Apache Commons     Text 1.10.0, which disables the problematic interpolators by default. (CVE-2022-42889)

  - A sandbox bypass vulnerability involving map constructors in Jenkins Script Security Plugin     1228.vd93135a_2fb_25 and earlier allows attackers with permission to define and run sandboxed scripts,     including Pipelines, to bypass the sandbox protection and execute arbitrary code in the context of the     Jenkins controller JVM. (CVE-2023-24422)

  - HAProxy before 2.7.3 may allow a bypass of access control because HTTP/1 headers are inadvertently lost in     some situations, aka request smuggling. The HTTP header parsers in HAProxy may accept empty header field     names, which could be used to truncate the list of HTTP headers and thus make some headers disappear after     being parsed and processed for HTTP/1.0 and HTTP/1.1. For HTTP/2 and HTTP/3, the impact is limited because     the headers disappear before being parsed and processed, as if they had not been sent by the client. The     fixed versions are 2.7.3, 2.6.9, 2.5.12, 2.4.22, 2.2.29, and 2.0.31. (CVE-2023-25725)

  - Jenkins 2.270 through 2.393 (both inclusive), LTS 2.277.1 through 2.375.3 (both inclusive) does not escape     the Jenkins version a plugin depends on when rendering the error message stating its incompatibility with     the current version of Jenkins, resulting in a stored cross-site scripting (XSS) vulnerability exploitable     by attackers able to provide plugins to the configured update sites and have this message shown by Jenkins     instances. (CVE-2023-27898)

  - Jenkins 2.393 and earlier, LTS 2.375.3 and earlier creates a temporary file in the default temporary     directory with the default permissions for newly created files when uploading a plugin for installation,     potentially allowing attackers with access to the Jenkins controller file system to read and write the     file before it is used, potentially resulting in arbitrary code execution. (CVE-2023-27899)

  - Jenkins 2.393 and earlier, LTS 2.375.3 and earlier creates a temporary file in the default temporary     directory with the default permissions for newly created files when uploading a file parameter through the     CLI, potentially allowing attackers with access to the Jenkins controller file system to read and write     the file before it is used. (CVE-2023-27903)

  - Jenkins 2.393 and earlier, LTS 2.375.3 and earlier prints an error stack trace on agent-related pages when     agent connections are broken, potentially revealing information about Jenkins configuration that is     otherwise inaccessible to attackers. (CVE-2023-27904)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The remote host contains a Spring Security version that is 5.7.x prior to 5.7.5 or 5.6.x prior to 5.6.9. It may, therefore, be affected by an authorization bypass vulnerability.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The versions of MySQL Enterprise Monitor installed on the remote host are affected by multiple vulnerabilities as referenced in the January 2023 CPU advisory.

  - Vulnerability in the MySQL Enterprise Monitor product of Oracle MySQL (component: Monitoring: General     (Spring Security)). Supported versions that are affected are 8.0.32 and prior. Easily exploitable     vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise     MySQL Enterprise Monitor. Successful attacks of this vulnerability can result in takeover of MySQL     Enterprise Monitor. (CVE-2022-31692)

  - Vulnerability in the MySQL Enterprise Monitor product of Oracle MySQL (component: Monitoring: General     (Apache Tomcat)). Supported versions that are affected are 8.0.32 and prior. Easily exploitable     vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise     MySQL Enterprise Monitor. Successful attacks of this vulnerability can result in unauthorized creation,     deletion or modification access to critical data or all MySQL Enterprise Monitor accessible data.
    (CVE-2022-42252)

  - Vulnerability in the MySQL Enterprise Monitor product of Oracle MySQL (component: Monitoring: General     (Spring Framework)). Supported versions that are affected are 8.0.32 and prior. Easily exploitable     vulnerability allows low privileged attacker with network access via multiple protocols to compromise     MySQL Enterprise Monitor. Successful attacks of this vulnerability can result in unauthorized ability to     cause a hang or frequently repeatable crash (complete DOS) of MySQL Enterprise Monitor. (CVE-2022-22971)

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Severity
251688	Linux Distros Unpatched Vulnerability : CVE-2022-31692	Nessus	Misc.	critical
202829	Nutanix AOS : Multiple Vulnerabilities (NXSA-AOS-6.8.1)	Nessus	Misc.	medium
194304	RHEL 7 / 8 : OpenShift Container Platform 4.10.56 (RHSA-2023:1655)	Nessus	Red Hat Local Security Checks	critical
189435	RHCOS 4 : OpenShift Container Platform 4.10.56 (RHSA-2023:1655)	Nessus	Red Hat Local Security Checks	critical
171061	Spring Security 5.6.x < 5.6.9 / 5.7.x < 5.7.5 Authorization Bypass	Nessus	Misc.	critical
170195	Oracle MySQL Enterprise Monitor (Jan 2023 CPU)	Nessus	CGI abuses	critical

Detections

Analytics

CVE-2022-31692

critical

Tenable Plugins

critical

medium

critical

critical

critical

critical