| 1.6.4 Configure NTP Authentication | CIS Cisco NX-OS v1.2.0 L2 | Cisco | ACCESS CONTROL, AUDIT AND ACCOUNTABILITY |
| ARST-ND-000110 - The Arista network device must enforce approved authorizations for controlling the flow of management information within the network device based on information flow control policies. | DISA Arista MLS EOS 4.X NDM STIG v2r2 | Arista | ACCESS CONTROL |
| ARST-ND-000660 - The Arista network device must be configured to authenticate SNMP messages using a FIPS-validated Keyed-Hash Message Authentication Code (HMAC). | DISA STIG Arista MLS EOS 4.2x NDM v2r1 | Arista | IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000050 - The Cisco router must be configured to enable routing protocol authentication using FIPS 198-1 algorithms with keys not exceeding 180 days of lifetime. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL, IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000160 - The Cisco router must be configured to have IP directed broadcast disabled on all interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000170 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) unreachable messages disabled on all external interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000200 - The Cisco router must be configured to log all packets that have been dropped at interfaces via ACL. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000220 - The Cisco router must be configured to produce audit records containing information to establish the source of the events. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000235 - The Cisco router must be configured to have Cisco Express Forwarding enabled. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000236 - The Cisco router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000237 - The Cisco router must not be configured to use IPv6 Site Local Unicast addresses. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000250 - The Cisco perimeter router must be configured to enforce approved authorizations for controlling the flow of information between interconnected networks in accordance with applicable policy. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000270 - The Cisco perimeter router must be configured to block inbound packets with source Bogon IP address prefixes. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000280 - The Cisco perimeter router must be configured to protect an enclave connected to an alternate gateway by using an inbound filter that only permits packets with destination addresses within the sites address space. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an alternate gateway service provider into BGP or an IGP peering with the NIPRNet or to other autonomous systems. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000300 - The Cisco perimeter router must be configured to not redistribute static routes to an alternate gateway service provider into BGP or an Interior Gateway Protocol (IGP) peering with the NIPRNet or to other autonomous systems. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000330 - The Cisco perimeter router must be configured to filter ingress traffic at the external interface on an inbound direction. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000350 - The Cisco perimeter router must be configured to block all packets with any IP options. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000360 - The Cisco perimeter router must be configured to have Link Layer Discovery Protocol (LLDP) disabled on all external interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000390 - The Cisco perimeter router must be configured to block all outbound management traffic. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000391 - The Cisco perimeter router must be configured to suppress Router Advertisements on all external IPv6-enabled interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000393 - The Cisco perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000400 - The Cisco out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000410 - The Cisco out-of-band management (OOBM) gateway router must be configured to forward only authorized management traffic to the Network Operations Center (NOC). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000420 - The Cisco out-of-band management (OOBM) gateway router must be configured to have separate IGP instances for the managed network and management network. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000430 - The Cisco out-of-band management (OOBM) gateway router must be configured to not redistribute routes between the management network routing domain and the managed network routing domain. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000450 - The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000450 - The Cisco router must be configured to only permit management traffic that ingresses and egresses the out-of-band management (OOBM) interface. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000490 - The Cisco BGP router must be configured to reject inbound route advertisements for any Bogon prefixes. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000510 - The Cisco BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000620 - The Cisco MPLS router must be configured to have TTL Propagation disabled. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000630 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000640 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance with the appropriate Route Target (RT). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000680 - The Cisco PE router providing Virtual Private LAN Services (VPLS) must be configured to have all attachment circuits defined to the virtual forwarding instance (VFI) with the globally unique VPN ID assigned for each customer VLAN. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000720 - The Cisco PE router must be configured to limit the number of MAC addresses it can learn for each Virtual Private LAN Services (VPLS) bridge domain. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000780 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to limit the effects of packet flooding denial of service (DoS) attacks. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000820 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000820 - The Cisco multicast Rendezvous Point (RP) router must be configured to limit the multicast forwarding cache so that its resources are not saturated by managing an overwhelming number of Protocol Independent Multicast (PIM) and Multicast Source Discovery Protocol (MSDP) source-active entries. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000830 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Register messages received from the Designated Router (DR) for any undesirable multicast groups and sources. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000840 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000910 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to authenticate all received MSDP packets. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000930 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter source-active multicast advertisements to external MSDP peers to avoid global visibility of local-only multicast sources and groups. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000940 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to limit the amount of source-active messages it accepts on a per-peer basis. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
