| 1.1.5 Set 'login authentication for 'line tty' | CIS Cisco IOS 15 L1 v4.1.1 | Cisco | ACCESS CONTROL |
| 1.1.6 Set 'login authentication for 'line vty' | CIS Cisco IOS 15 L1 v4.1.1 | Cisco | ACCESS CONTROL |
| 1.4 CISC-RT-000070 | CIS Cisco IOS XR Router RTR STIG v1.0.0 CAT III | Cisco | CONFIGURATION MANAGEMENT |
| 1.8 CISC-RT-000170 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| 1.12 CISC-RT-000210 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | AUDIT AND ACCOUNTABILITY |
| 1.23 CISC-RT-000290 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT I | Cisco | ACCESS CONTROL |
| 1.31 CISC-RT-000391 | CIS Cisco IOS XE Switch RTR STIG v1.1.0 CAT II | Cisco | CONFIGURATION MANAGEMENT |
| 1.33 CISC-RT-000380 | CIS Cisco IOS XE Router RTR STIG v1.1.0 CAT II | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000070 - The Cisco router must be configured to have all non-essential capabilities disabled. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000210 - The Cisco router must be configured to produce audit records containing information to establish where the events occurred. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | AUDIT AND ACCOUNTABILITY |
| CISC-RT-000230 - The Cisco router must be configured to disable the auxiliary port unless it is connected to a secured modem providing encryption and authentication. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000236 - The Cisco router must be configured to advertise a hop limit of at least 32 in Router Advertisement messages for IPv6 stateless auto-configuration deployments. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000240 - The Cisco perimeter router must be configured to deny network traffic by default and allow network traffic by exception. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000260 - The Cisco perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000260 - The Cisco perimeter router must be configured to only allow incoming communications from authorized sources to be routed to authorized destinations. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000290 - The Cisco perimeter router must be configured to not be a Border Gateway Protocol (BGP) peer to an alternate gateway service provider. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000310 - The Cisco perimeter router must be configured to restrict it from accepting outbound IP packets that contain an illegitimate address in the source address field via egress filter or by enabling Unicast Reverse Path Forwarding (uRPF). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000320 - The Cisco perimeter router must be configured to filter traffic destined to the enclave in accordance with the guidelines contained in DoD Instruction 8551.1. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000340 - The Cisco perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000350 - The Cisco perimeter router must be configured to block all packets with any IP options. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000360 - The Cisco perimeter router must be configured to have Link Layer Discovery Protocol (LLDP) disabled on all external interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000370 - The Cisco perimeter router must be configured to have Cisco Discovery Protocol (CDP) disabled on all external interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000391 - The Cisco perimeter router must be configured to suppress Router Advertisements on all external IPv6-enabled interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000393 - The Cisco perimeter router must be configured drop IPv6 packets with a Routing Header type 0, 1, or 3-255. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000396 - The Cisco perimeter router must be configured to drop IPv6 packets containing an extension header with the Endpoint Identification option. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000400 - The Cisco out-of-band management (OOBM) gateway router must be configured to transport management traffic to the Network Operations Center (NOC) via dedicated circuit, MPLS/VPN service, or IPsec tunnel. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000440 - The Cisco out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the Network Operations Center (NOC). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000530 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000570 - The Cisco BGP router must be configured to limit the prefix size on any inbound route advertisement to /24, or the least significant prefixes issued to the customer. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000600 - The Cisco MPLS router must be configured to synchronize Interior Gateway Protocol (IGP) and LDP to minimize packet loss when an IGP adjacency is established prior to LDP peers completing label exchange. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000610 - The MPLS router with RSVP-TE enabled must be configured with message pacing to adjust maximum burst and maximum number of RSVP messages to an output queue based on the link speed and input queue size of adjacent core routers. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000650 - The Cisco PE router must be configured to have each VRF with the appropriate Route Distinguisher (RD). | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000660 - The Cisco PE router providing MPLS Layer 2 Virtual Private Network (L2VPN) services must be configured to authenticate targeted Label Distribution Protocol (LDP) sessions used to exchange virtual circuit (VC) information using a FIPS-approved message authentication code algorithm. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000690 - The Cisco PE router must be configured to enforce the split-horizon rule for all pseudowires within a Virtual Private LAN Services (VPLS) bridge domain. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000790 - The Cisco multicast router must be configured to disable Protocol Independent Multicast (PIM) on all interfaces that are not required to support multicast routing. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000850 - The Cisco multicast Rendezvous Point (RP) must be configured to rate limit the number of Protocol Independent Multicast (PIM) Register messages. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000860 - The Cisco multicast Designated Router (DR) must be configured to filter the Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Report messages to allow hosts to join only multicast groups that have been approved by the organization. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000890 - The Cisco multicast Designated Router (DR) must be configured to set the shortest-path tree (SPT) threshold to infinity to minimalize source-group (S, G) state within the multicast topology where Any Source Multicast (ASM) is deployed. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000950 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to use a loopback address as the source address when originating MSDP traffic. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| DISA_STIG_Microsoft_Edge_v2r3.audit from DISA Microsoft Edge v2r3 STIG | DISA STIG Edge v2r3 | Windows | |
| DISA_STIG_Microsoft_OneDrive_v2r4.audit from DISA Microsoft OneDrive v2r4 STIG | DISA STIG Microsoft OneDrive v2r4 | Windows | |
| DISA_STIG_Oracle_Database_11.2g_v2r5_OS_Windows.audit from DISA Oracle Database 11.2g v2r5 STIG | DISA STIG Oracle 11.2g v2r5 Windows | Windows | |
| DISA_STIG_Oracle_Database_12c_v3r5_OS_Windows.audit from DISA Oracle Database 12c v3r5 STIG | DISA Oracle Database 12c STIG v3r5 Windows | Windows | |
| DISA_STIG_Oracle_Database_19c_v1r3_Unix.audit from DISA Oracle Database 19c STIG v1r3 | DISA Oracle Database 19c STIG v1r3 Unix | Unix | |
| DISA_STIG_Oracle_Database_19c_v1r3_Windows.audit from DISA Oracle Database 19c STIG v1r3 | DISA Oracle Database 19c STIG v1r3 Windows | Windows | |
| DISA_STIG_Oracle_Database_19c_v1r5_Windows.audit from DISA Oracle Database 19c STIG v1r5 | DISA Oracle Database 19c STIG v1r5 Windows | Windows | |
| DISA_STIG_Oracle_MySQL_8.0_v2r2_OS_Linux.audit from DISA Oracle MySQL 8.0 v2r2 STIG | DISA Oracle MySQL 8.0 v2r2 OS Linux | Unix | |
| OS10-NDM-000510 - The Dell OS10 Switch must use FIPS 140-2 approved algorithms for authentication to a cryptographic module. | DISA Dell OS10 Switch NDM STIG v1r1 | Dell_OS10 | IDENTIFICATION AND AUTHENTICATION |
