| CISC-RT-000060 - The Cisco router must be configured to have all inactive interfaces disabled. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000120 - The Cisco router must be configured to protect against or limit the effects of denial-of-service (DoS) attacks by employing control plane protection. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000130 - The Cisco router must be configured to restrict traffic destined to itself. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000150 - The Cisco router must be configured to have Gratuitous ARP disabled on all external interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000180 - The Cisco router must be configured to have Internet Control Message Protocol (ICMP) mask reply messages disabled on all external interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000235 - The Cisco router must be configured to have Cisco Express Forwarding enabled. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000237 - The Cisco router must not be configured to use IPv6 Site Local Unicast addresses. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000270 - The Cisco perimeter router must be configured to block inbound packets with source Bogon IP address prefixes. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000280 - The Cisco perimeter router must be configured to protect an enclave connected to an alternate gateway by using an inbound filter that only permits packets with destination addresses within the sites address space. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000340 - The Cisco perimeter router must be configured to filter egress traffic at the internal interface on an inbound direction. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000380 - The Cisco perimeter router must be configured to have Proxy ARP disabled on all external interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000392 - The Cisco perimeter router must be configured to drop IPv6 undetermined transport packets. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000394 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000394 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop header with invalid option type values. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000397 - The Cisco perimeter router must be configured to drop IPv6 packets containing the NSAP address option within Destination Option header. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000398 - The Cisco perimeter router must be configured to drop IPv6 packets containing a Hop-by-Hop or Destination Option extension header with an undefined option type. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000440 - The Cisco out-of-band management (OOBM) gateway router must be configured to block any traffic destined to itself that is not sourced from the OOBM network or the Network Operations Center (NOC). | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000460 - The Cisco router providing connectivity to the Network Operations Center (NOC) must be configured to forward all in-band management traffic via an IPsec tunnel. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000470 - The Cisco BGP router must be configured to enable the Generalized TTL Security Mechanism (GTSM). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000480 - The Cisco BGP router must be configured to use a unique key for each autonomous system (AS) that it peers with. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL, CONFIGURATION MANAGEMENT |
| CISC-RT-000500 - The Cisco BGP router must be configured to reject inbound route advertisements for any prefixes belonging to the local autonomous system (AS). | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000510 - The Cisco BGP router must be configured to reject inbound route advertisements from a customer edge (CE) router for prefixes that are not allocated to that customer. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000530 - The Cisco BGP router must be configured to reject outbound route advertisements for any prefixes belonging to the IP core. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000540 - The Cisco BGP router must be configured to reject route advertisements from BGP peers that do not list their autonomous system (AS) number as the first AS in the AS_PATH attribute. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000540 - The Cisco BGP router must be configured to reject route advertisements from BGP peers that do not list their autonomous system (AS) number as the first AS in the AS_PATH attribute. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000560 - The Cisco BGP router must be configured to use the maximum prefixes feature to protect against route table flooding and prefix de-aggregation attacks. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000580 - The Cisco BGP router must be configured to use its loopback address as the source address for iBGP peering sessions. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000590 - The Cisco MPLS router must be configured to use its loopback address as the source address for LDP peering sessions. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000610 - The MPLS router with RSVP-TE enabled must be configured with message pacing to adjust maximum burst and maximum number of RSVP messages to an output queue based on the link speed and input queue size of adjacent core routers. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000620 - The Cisco MPLS router must be configured to have TTL Propagation disabled. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONFIGURATION MANAGEMENT |
| CISC-RT-000630 - The Cisco PE router must be configured to have each Virtual Routing and Forwarding (VRF) instance bound to the appropriate physical or logical interfaces to maintain traffic separation between all MPLS L3VPNs. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000670 - The Cisco PE router providing MPLS Virtual Private Wire Service (VPWS) must be configured to have the appropriate virtual circuit identification (VC ID) for each attachment circuit. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | CONTINGENCY PLANNING |
| CISC-RT-000700 - The Cisco PE router providing Virtual Private LAN Services (VPLS) must be configured to have traffic storm control thresholds on CE-facing interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000710 - The Cisco PE router must be configured to implement Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) snooping for each Virtual Private LAN Services (VPLS) bridge domain. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000730 - The Cisco PE router must be configured to block any traffic that is destined to IP core infrastructure. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000740 - The Cisco PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000740 - The Cisco PE router must be configured with Unicast Reverse Path Forwarding (uRPF) loose mode enabled on all CE-facing interfaces. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000750 - The Cisco PE router must be configured to ignore or drop all packets with any IP options. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000760 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000760 - The Cisco PE router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000770 - The Cisco P router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000770 - The Cisco P router must be configured to enforce a Quality-of-Service (QoS) policy to provide preferred treatment for mission-critical applications. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000800 - The Cisco multicast router must be configured to bind a Protocol Independent Multicast (PIM) neighbor filter to interfaces that have PIM enabled. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | ACCESS CONTROL |
| CISC-RT-000810 - The Cisco multicast edge router must be configured to establish boundaries for administratively scoped multicast traffic. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
| CISC-RT-000880 - The Cisco multicast Designated Router (DR) must be configured to limit the number of mroute states resulting from Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Host Membership Reports. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000880 - The Cisco multicast Designated Router (DR) must be configured to limit the number of mroute states resulting from Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) Host Membership Reports. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000900 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to only accept MSDP packets from known MSDP peers. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000900 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to only accept MSDP packets from known MSDP peers. | DISA Cisco IOS XR Router RTR STIG v3r3 | Cisco | SYSTEM AND COMMUNICATIONS PROTECTION |
| CISC-RT-000910 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to authenticate all received MSDP packets. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | IDENTIFICATION AND AUTHENTICATION |
| CISC-RT-000920 - The Cisco Multicast Source Discovery Protocol (MSDP) router must be configured to filter received source-active multicast advertisements for any undesirable multicast groups and sources. | DISA Cisco IOS XE Router RTR STIG v3r5 | Cisco | ACCESS CONTROL |
