Detections
Analytics
CISC-RT-000840 - The Cisco multicast Rendezvous Point (RP) router must be configured to filter Protocol Independent Multicast (PIM) Join messages received from the Designated Router (DR) for any undesirable multicast groups.
Information
Real-time multicast traffic can entail multiple large flows of data. An attacker can flood a network segment with multicast packets, over-using the available bandwidth and thereby creating a denial-of-service (DoS) condition. Hence, it is imperative that join messages are only accepted for authorized multicast groups.Solution
Configure the RP to filter PIM join messages for any undesirable multicast groups as shown in the example below.R2(config)#ip access-list standard PIM_JOIN_FILTER
R2(config-std-nacl)#deny 239.8.0.0 0.0.255.255
R2(config-std-nacl)#permit any
R2(config-std-nacl)#exit
R2(config)#ip pim accept-rp 10.2.2.2 PIM_JOIN_FILTER
R2(config)#end
See Also
https://dl.dod.cyber.mil/wp-content/uploads/stigs/zip/U_Cisco_IOS_Router_Y26M04_STIG.zip
Item Details
Audit Name: DISA Cisco IOS Router RTR STIG v3r4
Category: ACCESS CONTROL
References: 800-53|AC-4, CAT|III, CCI|CCI-001414, Rule-ID|SV-216627r1117237_rule, STIG-ID|CISC-RT-000840, STIG-Legacy|SV-105791, STIG-Legacy|V-96653, Vuln-ID|V-216627
Plugin: Cisco
Control ID: d0d97d5824d8d7169a0a35e812087a31be3c372c0e01aeb83b4b5a14e1b360e7