18.9.7.1.1 Ensure 'Prevent installation of devices that match any of these device IDs' is set to 'Enabled'

800-53|MP-7

18.9.7.1.2 Ensure 'Prevent installation of devices that match any of these device IDs: Prevent installation of devices that match any of these device IDs' is set to 'PCI\CC_0C0A'

18.9.7.1.3 Ensure 'Prevent installation of devices that match any of these device IDs: Also apply to matching devices that are already installed.' is set to 'True' (checked)

18.9.7.1.4 Ensure 'Prevent installation of devices using drivers that match these device setup classes' is set to 'Enabled'

18.9.7.1.5 Ensure 'Prevent installation of devices using drivers that match these device setup classes: Prevent installation of devices using drivers for these device setup' is set to 'IEEE 1394 device setup classes'

800-53|SI-3c.2.

18.9.7.1.6 Ensure 'Prevent installation of devices using drivers that match these device setup classes: Also apply to matching devices that are already installed.' is set to 'True' (checked)

800-53|SI-16

CSCv7|2.5

18.9.24.1 Ensure 'Enumeration policy for external devices incompatible with Kernel DMA Protection' is set to 'Enabled: Block All'

800-53|CM-8

CSCv7|1.4

18.9.35.6.3 Ensure 'Allow standby states (S1-S3) when sleeping (on battery)' is set to 'Disabled'

800-53|CM-6

CSCv7|5.1

18.9.35.6.4 Ensure 'Allow standby states (S1-S3) when sleeping (plugged in)' is set to 'Disabled'

18.10.10.1.1 Ensure 'Allow access to BitLocker-protected fixed data drives from earlier versions of Windows' is set to 'Disabled'

800-53|AC-19(5)

CSCv7|13.6

18.10.10.1.2 Ensure 'Choose how BitLocker-protected fixed drives can be recovered' is set to 'Enabled'

800-53|SC-28

18.10.10.1.3 Ensure 'Choose how BitLocker-protected fixed drives can be recovered: Allow data recovery agent' is set to 'Enabled: True'

18.10.10.1.4 Ensure 'Choose how BitLocker-protected fixed drives can be recovered: Recovery Password' is set to 'Enabled: Allow 48-digit recovery password' or higher

18.10.10.1.5 Ensure 'Choose how BitLocker-protected fixed drives can be recovered: Recovery Key' is set to 'Enabled: Allow 256-bit recovery key' or higher

18.10.10.1.6 Ensure 'Choose how BitLocker-protected fixed drives can be recovered: Omit recovery options from the BitLocker setup wizard' is set to 'Enabled: True'

18.10.10.1.7 Ensure 'Configure use of hardware-based encryption for fixed data drives' is set to 'Disabled'

18.10.10.1.8 Ensure 'Configure use of passwords for fixed data drives' is set to 'Disabled'

800-53|IA-5(1)

18.10.10.1.9 Ensure 'Configure use of smart cards on fixed data drives' is set to 'Enabled'

800-53|IA-5(11)

800-53|SC-28(1)

CSCv7|16.3

18.10.10.1.10 Ensure 'Configure use of smart cards on fixed data drives: Require use of smart cards on fixed data drives' is set to 'Enabled: True'

18.10.10.2.1 Ensure 'Allow enhanced PINs for startup' is set to 'Enabled'

18.10.10.2.2 Ensure 'Allow Secure Boot for integrity validation' is set to 'Enabled'

18.10.10.2.3 Ensure 'Choose how BitLocker-protected operating system drives can be recovered' is set to 'Enabled'

18.10.10.2.4 Ensure 'Choose how BitLocker-protected operating system drives can be recovered: Allow data recovery agent' is set to 'Enabled: False'

18.10.10.2.5 Ensure 'Choose how BitLocker-protected operating system drives can be recovered: Recovery Password' is set to 'Enabled: Require 48-digit recovery password'

18.10.10.2.6 Ensure 'Choose how BitLocker-protected operating system drives can be recovered: Recovery Key' is set to 'Enabled: Do not allow 256-bit recovery key'

18.10.10.2.7 Ensure 'Choose how BitLocker-protected operating system drives can be recovered: Omit recovery options from the BitLocker setup wizard' is set to 'Enabled: True'

18.10.10.2.8 Ensure 'Configure use of hardware-based encryption for operating system drives' is set to 'Disabled'

18.10.10.3.1 Ensure 'Allow access to BitLocker-protected removable data drives from earlier versions of Windows' is set to 'Disabled'

18.10.10.3.2 Ensure 'Choose how BitLocker-protected removable drives can be recovered' is set to 'Enabled'

800-53|MP-5

18.10.10.3.3 Ensure 'Choose how BitLocker-protected removable drives can be recovered: Allow data recovery agent' is set to 'Enabled: True'

18.10.10.3.4 Ensure 'Choose how BitLocker-protected removable drives can be recovered: Recovery Password' is set to 'Enabled: Do not allow 48-digit recovery password'

18.10.10.3.5 Ensure 'Choose how BitLocker-protected removable drives can be recovered: Recovery Key' is set to 'Enabled: Do not allow 256-bit recovery key'

18.10.10.3.6 Ensure 'Choose how BitLocker-protected removable drives can be recovered: Omit recovery options from the BitLocker setup wizard' is set to 'Enabled: True'

18.10.10.3.7 Ensure 'Configure use of hardware-based encryption for removable data drives' is set to 'Disabled'

18.10.10.3.8 Ensure 'Configure use of passwords for removable data drives' is set to 'Disabled'

18.10.10.3.9 Ensure 'Configure use of smart cards on removable data drives' is set to 'Enabled'

18.10.10.3.10 Ensure 'Configure use of smart cards on removable data drives: Require use of smart cards on removable data drives' is set to 'Enabled: True'

18.10.10.3.11 Ensure 'Deny write access to removable drives not protected by BitLocker' is set to 'Enabled'

CSCv7|13.8

18.10.10.3.12 Ensure 'Deny write access to removable drives not protected by BitLocker: Do not allow write access to devices configured in another organization' is set to 'Enabled: False'

18.10.10.4 Ensure 'Disable new DMA devices when this computer is locked' is set to 'Enabled'

CIS_Microsoft_Windows_10_Stand-alone_v5.0.0_BL.audit from CIS Microsoft Windows 10 Stand-alone v5.0.0

Detections

Analytics

CIS Microsoft Windows 10 Stand-alone v5.0.0 BL

Audit Details

File Details

Audit Changelog

No revisions found