The remote openSUSE 15 host has a package installed that is affected by multiple vulnerabilities as referenced in the openSUSE-SU-2025:0074-1 advisory.

    Update to 1.20:

      * krun: fix CVE-2025-24965. The .krun_config.json file could be created outside of the container rootfs.
    (bsc#1237421)
      * cgroup: reverted the removal of tun/tap from the default allow list, this was done in crun-1.5. The     tun/tap device is now added by default again.
      * CRIU: do not set network_lock unless explicitly specified.
      * status: disallow container names containing slashes in their name.
      * linux: Improved error message when failing to set the net.ipv4.ping_group_range sysctl.
      * scheduler: Ignore ENOSYS errors when resetting the CPU affinity mask.
      * linux: return a better error message when pidfd_open fails with EINVAL.
      * cgroup: display the absolute path to cgroup.controllers when a controller is unavailable.
      * exec: always call setsid. Now processes created through exec get the correct process group id.

    Update to 1.19.1:

      * linux: fix a hang if there are no reads from the tty. Use non blocking         sockets to read and write from the tty so that the 'crun exec' process         doesn't hang when the terminal is not consuming any data.
      * linux: remove the workaround needed to mount a cgroup on top of         another cgroup mount. The workaround had the disadvantage to temporarily         leak a mount on the host. The alternative that is currently used is         to mount a temporary tmpfs between the twoo cgroup mounts.

    Update to 1.19:
      * wasm: add new handler wamr.
      * criu: allow passing network lock method to libcriu.
      * linux: honor exec cpu affinity mask.
      * build: fix build with musl libc.
      * crun: use mount API to self-clone.
      * cgroup, systemd: do not override devices on update. If the 'update' request has no device block     configured, do not reset the previously configuration.
      * cgroup: handle case where cgroup v1 freezer is disabled. On systems without the freezer controller,     containers were mistakenly reported as paused.
      * cgroup: do not stop process on exec. The cpu mask is configured on the systemd scope, the previous     workaround to stop the container until the cgroup is fully configured is no longer needed.

    - Update to crun v1.18.2 Upstream changelog is available from       <https://github.com/containers/crun/releases/tag/1.18.2>

    - Update to crun v1.18. Upstream changelog is available from       <https://github.com/containers/crun/releases/tag/1.18>

    Update to 1.17:

      * Add --log-level option. It accepts error, warning and error.
      * Add debug logs for container creation.
      * Fix double-free in crun exec code that could lead to a crash.
      * Allow passing an ID to the journald log driver.
      * Report 'executable not found' errors after tty has been setup.
      * Do not treat EPIPE from hooks as an error.
      * Make sure DefaultDependencies is correctly set in the systemd scope.
      * Improve the error message when the container process is not found.
      * Improve error handling for the mnt namespace restoration.
      * Fix error handling for getpwuid_r, recvfrom and libcrun_kill_linux.
      * Fix handling of device paths with trailing slashes.
    - add url for keyring
    - enable leap by disabling wasmedge (not packaged for leap)

    Upstream release 1.16.1:

    - fix a regression introduced by 1.16 where using 'rshared' rootfs mount propagation and the rootfs itself     is a mountpoint.
    - inherit user from original process on exec, if not overridden.

    Update to 1.16:

    - build: fix build for s390x.
    - linux: fix mount of special files with rro.  Open the mount target with O_PATH to prevent open(2)     failures with special files like FIFOs or UNIX sockets.
    - Fix sd-bus error handling for cpu quota and period props update.
    - container: use relative path for rootfs if possible.  If the rootfs cannot be resolved and it is below     the current working directory, only use its relative path.
    - wasmedge: access container environment variables for the WasmEdge configuration.
    - cgroup, systemd: use MemoryMax instead of MemoryLimit.  Fixes a warning for using an old configuration     name.
    - cgroup, systemd: improve checks for sd_bus_message_append errors

    New upstream release 1.15:

      * fix a mount point leak under /run/crun, add a retry mechanism to unmount the directory if the removal     failed with EBUSY.
      * linux: cgroups: fix potential mount leak when /sys/fs/cgroup is already mounted, causing the posthooks     to not run.
      * release: build s390x binaries using musl libc.
      * features: add support for potentiallyUnsafeConfigAnnotations.
      * handlers: add option to load wasi-nn plugin for wasmedge.
      * linux: fix 'harden chdir()' security measure. The previous check was not correct.
      * crun: add option --keep to the run command. When specified the container is not automatically deleted     when it exits.

    New upstream release 1.14.4:

    - linux: fix mount of file with recursive flags.  Do not assume it is       a directory, but check the source type.

    - follow up for 1.14.2.  Drop the version check for each command.

    - crun: drop check for OCI version.  A recent bump in the OCI runtime       specs caused crun to fail with every config file.  Just drop the       check since it doesn't add any value.

    - there was recently a security vulnerability (CVE-2024-21626) in runc       that allowed a malicious user to chdir(2) to a /proc/*/fd entry that is       outside the container rootfs.  While crun is not affected directly,       harden chdir by validating that we are still inside the container       rootfs.
    - container: attempt to close all the files before execv(2).
      if we leak any fd, it prevents execv to gain access to files outside       the container rootfs through /proc/self/fd/$fd.
    - fix a regression caused by 1.14 when installing the ebpf filter on a       kernel older than 5.11.
    - cgroup, systemd: fix segfault if the resources block is not specified.

    Update to 1.14:

      * build: drop dependency on libgcrypt. Use blake3 to compute the cache key.
      * cpuset: don't clobber parent cgroup value when writing the cpuset value.
      * linux: force umask(0). It ensures that the mknodat syscall is not affected by the umask of the calling     process,         allowing file permissions to be set as specified in the OCI configuration.
      * ebpf: do not require MEMLOCK for eBPF programs. This requirement was relaxed in Linux 5.11.
    - update to 1.13:
      * src: use O_CLOEXEC for all open/openat calls
      * cgroup v1: use 'max' when pids limit < 0.
      * improve error message when idmap mount fails because the underlying file system has no support for it.
      * libcrun: fix compilation when building without libseccomp and libcap.
      * fix relative idmapped mount when using the custom annotation.

    - New upstream release 1.12:
      * add new WebAssembly handler: spin.
      * systemd: fallback to system bus if session bus is not available.
      * configure the cpu rt and cpuset controllers before joining them to         avoid running temporarily the workload on the wrong cpus.
      * preconfigure the cpuset with required resources instead of using the         parent's set.  This prevents needless churn in the kernel as it         tracks which CPUs have load balancing disabled.
      * try attr/<lsm>/* before the attr/* files.  Writes to the attr/*         files may fail if apparmor is not the first 'major' LSM in the list         of loaded LSMs (e.g. lsm=apparmor,bpf vs lsm=bpf,apparmor).
    - New upstream release 1.11.2:
      * fix a regression caused by 1.11.1 where the process crashes if there         are no CPU limits configured on cgroup v1. (boo#1217590)
      * fix error code check for the ptsname_r function.

    - update to 1.11.1:
      * force a remount operation with bind mounts from the host to         correctly set all the mount flags.
      * cgroup: honor cpu burst.
      * systemd: set CPUQuota and CPUPeriod on the scope cgroup.
      * linux: append tmpfs mode if missing for mounts.  This is the         same behavior of runc.
      * cgroup: always use the user session for rootless.
      * support for Intel Resource Director Technology (RDT).
      * new mount option 'copy-symlink'.  When provided for a mount,         if the source is a symlink, then it is copied in the container         instead of attempting a mount.
      * linux: open mounts before setgroups if in a userns.  This         solves a problem where a directory that was previously         accessible to the user, become inaccessible after setgroups         causing the bind mount to fail.

    - New upstream release 1.9.2:
      * cgroup: reset the inherited cpu affinity after moving to cgroup. Old kernels         do that automatically, but new kernels remember the affinity that was set         before the cgroup move, so we need to reset it in order to honor the cpuset         configuration.
    - New upstream release 1.9.1:
      * utils: ignore ENOTSUP when chmod a symlink. It fixes a problem on Linux 6.6         that always refuses chmod on a symlink.
      * build: fix build on CentOS 7
      * linux: add new fallback when mount fails with EBUSY, so that there is not an         additional tmpfs mount if not needed.
      * utils: improve error message when a directory cannot be created as a         component of the path is already existing as a non directory.
    - Only build with wasmedge on x86_64 & aarch64

    - Add crun-wasm symlink for platform 'wasi/wasm'

    - Update to 1.9:
      * linux: support arbitrary idmapped mounts.
      * linux: add support for 'ridmap' mount option to support recursive         idmapped mounts.
      * crun delete: call systemd's reset-failed.
      * linux: fix check for oom_score_adj.
      * features: Support mountExtensions.
      * linux: correctly handle unknown signal string when it doesn't start with         a digit.
      * linux: do not attempt to join again already joined namespace.
      * wasmer: use latest wasix API.

    - Enable WasmEdge support to run Wasm compat containers.

      * linux: idmapped mounts expect the same configuration as         mapping. It is a breaking change, but the behavior was aligned
      * cgroup: always delete the cgroup on errors.
      ? exec: fix double free when using --apparmor and

Tenable has extracted the preceding description block directly from the SUSE security advisory.

Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

The version of Tencent Linux installed on the remote TencentOS Server 4 host is prior to tested version. It is, therefore, affected by a vulnerability as referenced in the TSSA-2025:0244 advisory.

    Package updates are available for TencentOS Server 4 that fix the following vulnerabilities:

    CVE-2025-24965:
    crun is an open source OCI Container Runtime fully written in C. In affected versions A malicious     container image could trick the krun handler into escaping the root filesystem, allowing file creation or     modification on the host. No special permissions are needed, only the ability for the current user to     write to the target file. The problem is fixed in crun 1.20 and all users are advised to upgrade. There     are no known workarounds for this vulnerability.

Tenable has extracted the preceding description block directly from the Tencent Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - crun is an open source OCI Container Runtime fully written in C. In affected versions A malicious     container image could trick the krun handler into escaping the root filesystem, allowing file creation or     modification on the host. No special permissions are needed, only the ability for the current user to     write to the target file. The problem is fixed in crun 1.20 and all users are advised to upgrade. There     are no known workarounds for this vulnerability. (CVE-2025-24965)

Note that Nessus relies on the presence of the package as reported by the vendor.

ID	Name	Product	Family	Published	Updated	Severity
216855	openSUSE 15 Security Update : crun (openSUSE-SU-2025:0074-1)	Nessus	SuSE Local Security Checks	2/26/2025	9/25/2025	high
275890	TencentOS Server 4: crun (TSSA-2025:0244)	Nessus	Tencent Local Security Checks	11/20/2025	11/20/2025	high
251623	Linux Distros Unpatched Vulnerability : CVE-2025-24965	Nessus	Misc.	8/18/2025	4/29/2026	high

Detections

Analytics

Plugins Search

high

high

high