The version of Tencent Linux installed on the remote TencentOS Server 4 host is prior to tested version. It is, therefore, affected by multiple vulnerabilities as referenced in the TSSA-2025:0430 advisory. Package updates are available for TencentOS Server 4 that fix the following vulnerabilities: CVE-2024-58083: In the Linux kernel, the following vulnerability has been resolved: KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() Explicitly verify the target vCPU is fully online _prior_ to clamping the index in kvm_get_vcpu(). If the index is bad, the nospec clamping will generate '0', i.e. KVM will return vCPU0 instead of NULL. In practice, the bug is unlikely to cause problems, as it will only come into play if userspace or the guest is buggy or misbehaving, e.g. KVM may send interrupts to vCPU0 instead of dropping them on the floor. However, returning vCPU0 when it shouldn't exist per online_vcpus is problematic now that KVM uses an xarray for the vCPUs array, as KVM needs to insert into the xarray before publishing the vCPU to userspace (see commit c5b077549136 (KVM: Convert the kvm->vcpus array to a xarray)), i.e. before vCPU creation is guaranteed to succeed. As a result, incorrectly providing access to vCPU0 will trigger a use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu() bails out of vCPU creation due to an error and frees vCPU0. Commit afb2acb2e3a3 (KVM: Fix vcpu_array[0] races) papered over that issue, but in doing so introduced an unsolvable teardown conundrum. Preventing accesses to vCPU0 before it's fully online will allow reverting commit afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race. CVE-2024-56606: In the Linux kernel, the following vulnerability has been resolved: af_packet: avoid erroring out after sock_init_data() in packet_create() After sock_init_data() the allocated sk object is attached to the provided sock object. On error, packet_create() frees the sk object leaving the dangling pointer in the sock object on return. Some other code may try to use this pointer and cause use-after-free. CVE-2025-39728: In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix UBSAN panic in samsung_clk_init() With UBSAN_ARRAY_BOUNDS=y, I'm hitting the below panic due to dereferencing `ctx->clk_data.hws` before setting `ctx->clk_data.num = nr_clks`. Move that up to fix the crash. UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP Call trace: samsung_clk_init+0x110/0x124 (P) samsung_clk_init+0x48/0x124 (L) samsung_cmu_register_one+0x3c/0xa0 exynos_arm64_register_cmu+0x54/0x64 __gs101_cmu_top_of_clk_init_declare+0x28/0x60 ... CVE-2025-38637: In the Linux kernel, the following vulnerability has been resolved: net_sched: skbprio: Remove overly strict queue assertions In the current implementation, skbprio enqueue/dequeue contains an assertion that fails under certain conditions when SKBPRIO is used as a child qdisc under TBF with specific parameters. The failure occurs because TBF sometimes peeks at packets in the child qdisc without actually dequeuing them when tokens are unavailable. This peek operation creates a discrepancy between the parent and child qdisc queue length counters. When TBF later receives a high-priority packet, SKBPRIO's queue length may show a different value than what's reflected in its internal priority queue tracking, triggering the assertion. The fix removes this overly strict assertions in SKBPRIO, they are not necessary at all. CVE-2025-23138: In the Linux kernel, the following vulnerability has been resolved: watch_queue: fix pipe accounting mismatch Currently, watch_queue_set_size() modifies the pipe buffers charged to user->pipe_bufs without updating the pipe->nr_accounted on the pipe itself, due to the if (!pipe_has_watch_queue()) test in pipe_resize_ring(). This means that when the pipe is ultimately freed, we decrement user->pipe_bufs by something other than what than we had charged to it, potentially leading to an underflow. This in turn can cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM. To remedy this, explicitly account for the pipe usage in watch_queue_set_size() to match the number set via account_pipe_buffers() (It's unclear why watch_queue_set_size() does not update nr_accounted; it may be due to intentional overprovisioning in watch_queue_set_size()?) CVE-2025-22097: In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix use after free and double free on init error If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it might double free it. Fix both possible errors by initializing default_config only when the driver initialization succeeded. CVE-2025-22093: In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: avoid NPD when ASIC does not support DMUB ctx->dmub_srv will de NULL if the ASIC does not support DMUB, which is tested in dm_dmub_sw_init. However, it will be dereferenced in dmub_hw_lock_mgr_cmd if should_use_dmub_lock returns true. This has been the case since dmub support has been added for PSR1. Fix this by checking for dmub_srv in should_use_dmub_lock. [ 37.440832] BUG: kernel NULL pointer dereference, address: 0000000000000058 [ 37.447808] #PF: supervisor read access in kernel mode [ 37.452959] #PF: error_code(0x0000) - not-present page [ 37.458112] PGD 0 P4D 0 [ 37.460662] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 37.465553] CPU: 2 UID: 1000 PID: 1745 Comm: DrmThread Not tainted 6.14.0-rc1-00003-gd62e938120f0 #23 99720e1cb1e0fc4773b8513150932a07de3c6e88 [ 37.478324] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023 [ 37.487103] RIP: 0010:dmub_hw_lock_mgr_cmd+0x77/0xb0 [ 37.492074] Code: 44 24 0e 00 00 00 00 48 c7 04 24 45 00 00 0c 40 88 74 24 0d 0f b6 02 88 44 24 0c 8b 01 89 44 24 08 85 f6 75 05 c6 44 24 0e 01 <48> 8b 7f 58 48 89 e6 ba 01 00 00 00 e8 08 3c 2a 00 65 48 8b 04 5 [ 37.510822] RSP: 0018:ffff969442853300 EFLAGS: 00010202 [ 37.516052] RAX: 0000000000000000 RBX: ffff92db03000000 RCX: ffff969442853358 [ 37.523185] RDX: ffff969442853368 RSI: 0000000000000001 RDI: 0000000000000000 [ 37.530322] RBP: 0000000000000001 R08: 00000000000004a7 R09: 00000000000004a5 [ 37.537453] R10: 0000000000000476 R11: 0000000000000062 R12: ffff92db0ade8000 [ 37.544589] R13: ffff92da01180ae0 R14: ffff92da011802a8 R15: ffff92db03000000 [ 37.551725] FS: 0000784a9cdfc6c0(0000) GS:ffff92db2af00000(0000) knlGS:0000000000000000 [ 37.559814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.565562] CR2: 0000000000000058 CR3: 0000000112b1c000 CR4: 00000000003506f0 [ 37.572697] Call Trace: [ 37.575152] [ 37.577258] ? __die_body+0x66/0xb0 [ 37.580756] ? page_fault_oops+0x3e7/0x4a0 [ 37.584861] ? exc_page_fault+0x3e/0xe0 [ 37.588706] ? exc_page_fault+0x5c/0xe0 [ 37.592550] ? asm_exc_page_fault+0x22/0x30 [ 37.596742] ? dmub_hw_lock_mgr_cmd+0x77/0xb0 [ 37.601107] dcn10_cursor_lock+0x1e1/0x240 [ 37.605211] program_cursor_attributes+0x81/0x190 [ 37.609923] commit_planes_for_stream+0x998/0x1ef0 [ 37.614722] update_planes_and_stream_v2+0x41e/0x5c0 [ 37.619703] dc_update_planes_and_stream+0x78/0x140 [ 37.624588] amdgpu_dm_atomic_commit_tail+0x4362/0x49f0 [ 37.629832] ? srso_return_thunk+0x5/0x5f [ 37.633847] ? mark_held_locks+0x6d/0xd0 [ 37.637774] ? _raw_spin_unlock_irq+0x24/0x50 [ 37.642135] ? srso_return_thunk+0x5/0x5f [ 37.646148] ? lockdep_hardirqs_on+0x95/0x150 [ 37.650510] ? srso_return_thunk+0x5/0x5f [ 37.654522] ? _raw_spin_unlock_irq+0x2f/0x50 [ 37.658883] ? srso_return_thunk+0x5/0x5f [ 37.662897] ? wait_for_common+0x186/0x1c0 [ 37.666998] ? srso_return_thunk+0x5/0x5f [ 37.671009] ? drm_crtc_next_vblank_start+0xc3/0x170 [ 37.675983] commit_tail+0xf5/0x1c0 [ 37.679478] drm_atomic_helper_commit+0x2a2/0x2b0 [ 37.684186] drm_atomic_commit+0xd6/0x100 [ 37.688199] ? __cfi___drm_printfn_info+0x10/0x10 [ 37.692911] drm_atomic_helper_update_plane+0xe5/0x130 [ 37.698054] drm_mode_cursor_common+0x501/0x670 [ 37.702600] ? __cfi_drm_mode_cursor_ioctl+0x10/0x10 [ 37.707572] drm_mode_cursor_ioctl+0x48/0x70 [ 37.711851] drm_ioctl_kernel+0xf2/0x150 [ 37.715781] drm_ioctl+0x363/0x590 [ 37.719189] ? __cfi_drm_mode_cursor_ioctl+0x10/0x10 [ 37.724165] amdgpu_drm_ioctl+0x41/0x80 [ 37.728013] __se_sys_ioctl+0x7f/0xd0 [ 37.731685] do_syscall_64+0x87/0x100 [ 37.735355] ? vma_end_read+0x12/0xe0 [ 37.739024] ? srso_return_thunk+0x5/0x5f [ 37.743041] ? find_held_lock+0x47/0xf0 [ 37.746884] ? vma_end_read+0x12/0xe0 [ 37.750552] ? srso_return_thunk+0x5/0 ---truncated--- CVE-2025-22090: In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range() If track_pfn_copy() fails, we already added the dst VMA to the maple tree. As fork() fails, we'll cleanup the maple tree, and stumble over the dst VMA for which we neither performed any reservation nor copied any page tables. Consequently untrack_pfn() will see VM_PAT and try obtaining the PAT information from the page table -- which fails because the page table was not copied. The easiest fix would be to simply clear the VM_PAT flag of the dst VMA if track_pfn_copy() fails. However, the whole thing is about simply clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy() and performed a reservation, but copying the page tables fails, we'll simply clear the VM_PAT flag, not properly undoing the reservation ... which is also wrong. So let's fix it properly: set the VM_PAT flag only if the reservation succeeded (leaving it clear initially), and undo the reservation if anything goes wrong while copying the page tables: clearing the VM_PAT flag after undoing the reservation. Note that any copied page table entries will get zapped when the VMA will get removed later, after copy_page_range() succeeded; as VM_PAT is not set then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be happy. Note that leaving these page tables in place without a reservation is not a problem, as we are aborting fork(); this process will never run. A reproducer can trigger this usually at the first try: https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110 Modules linked in: ... CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:get_pat_info+0xf6/0x110 ... Call Trace: ... untrack_pfn+0x52/0x110 unmap_single_vma+0xa6/0xe0 unmap_vmas+0x105/0x1f0 exit_mmap+0xf6/0x460 __mmput+0x4b/0x120 copy_process+0x1bf6/0x2aa0 kernel_clone+0xab/0x440 __do_sys_clone+0x66/0x90 do_syscall_64+0x95/0x180 Likely this case was missed in: d155df53f310 (x86/mm/pat: clear VM_PAT if copy_p4d_range failed) ... and instead of undoing the reservation we simply cleared the VM_PAT flag. Keep the documentation of these functions in include/linux/pgtable.h, one place is more than sufficient -- we should clean that up for the other functions like track_pfn_remap/untrack_pfn separately. CVE-2025-22089: In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Don't expose hw_counters outside of init net namespace Commit 467f432a521a (RDMA/core: Split port and device counter sysfs attributes) accidentally almost exposed hw counters to non-init net namespaces. It didn't expose them fully, as an attempt to read any of those counters leads to a crash like this one: [42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028 [42021.814463] #PF: supervisor read access in kernel mode [42021.819549] #PF: error_code(0x0000) - not-present page [42021.824636] PGD 0 P4D 0 [42021.827145] Oops: 0000 [#1] SMP PTI [42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX [42021.841697] Hardware name: XXX [42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core] [42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff <48> 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48 [42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287 [42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000 [42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0 [42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000 [42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530 [42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000 [42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000 [42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0 [42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [42021.949324] Call Trace: [42021.951756] [42021.953842] [] ? show_regs+0x64/0x70 [42021.959030] [] ? __die+0x78/0xc0 [42021.963874] [] ? page_fault_oops+0x2b5/0x3b0 [42021.969749] [] ? exc_page_fault+0x1a2/0x3c0 [42021.975549] [] ? asm_exc_page_fault+0x26/0x30 [42021.981517] [] ? __pfx_show_hw_stats+0x10/0x10 [ib_core] [42021.988482] [] ? hw_stat_device_show+0x1e/0x40 [ib_core] [42021.995438] [] dev_attr_show+0x1e/0x50 [42022.000803] [] sysfs_kf_seq_show+0x81/0xe0 [42022.006508] [] seq_read_iter+0xf4/0x410 [42022.011954] [] vfs_read+0x16e/0x2f0 [42022.017058] [] ksys_read+0x6e/0xe0 [42022.022073] [] do_syscall_64+0x6a/0xa0 [42022.027441] [] entry_SYSCALL_64_after_hwframe+0x78/0xe2 The problem can be reproduced using the following steps: ip netns add foo ip netns exec foo bash cat /sys/class/infiniband/mlx4_0/hw_counters/* The panic occurs because of casting the device pointer into an ib_device pointer using container_of() in hw_stat_device_show() is wrong and leads to a memory corruption. However the real problem is that hw counters should never been exposed outside of the non-init net namespace. Fix this by saving the index of the corresponding attribute group (it might be 1 or 2 depending on the presence of driver-specific attributes) and zeroing the pointer to hw_counters group for compat devices during the initialization. With this fix applied hw_counters are not available in a non-init net namespace: find /sys/class/infiniband/mlx4_0/ -name hw_counters /sys/class/infiniband/mlx4_0/ports/1/hw_counters /sys/class/infiniband/mlx4_0/ports/2/hw_counters /sys/class/infiniband/mlx4_0/hw_counters ip netns add foo ip netns exec foo bash find /sys/class/infiniband/mlx4_0/ -name hw_counters CVE-2025-22086: In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow When cur_qp isn't NULL, in order to avoid fetching the QP from the radix tree again we check if the next cqe QP is identical to the one we already have. The bug however is that we are checking if the QP is identical by checking the QP number inside the CQE against the QP number inside the mlx5_ib_qp, but that's wrong since the QP number from the CQE is from FW so it should be matched against mlx5_core_qp which is our FW QP number. Otherwise we could use the wrong QP when handling a CQE which could cause the kernel trace below. This issue is mainly noticeable over QPs 0 & 1, since for now they are the only QPs in our driver whereas the QP number inside mlx5_ib_qp doesn't match the QP number inside mlx5_core_qp. BUG: kernel NULL pointer dereference, address: 0000000000000012 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21 RSP: 0018:ffff88810511bd60 EFLAGS: 00010046 RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000 R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0 FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0 Call Trace: ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib] __ib_process_cq+0x5a/0x150 [ib_core] ib_cq_poll_work+0x31/0x90 [ib_core] process_one_work+0x169/0x320 worker_thread+0x288/0x3a0 ? work_busy+0xb0/0xb0 kthread+0xd7/0x1f0 ? kthreads_online_cpu+0x130/0x130 ? kthreads_online_cpu+0x130/0x130 ret_from_fork+0x2d/0x50 ? kthreads_online_cpu+0x130/0x130 ret_from_fork_asm+0x11/0x20 CVE-2025-22083: In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint If vhost_scsi_set_endpoint is called multiple times without a vhost_scsi_clear_endpoint between them, we can hit multiple bugs found by Haoran Zhang: 1. Use-after-free when no tpgs are found: This fixes a use after free that occurs when vhost_scsi_set_endpoint is called more than once and calls after the first call do not find any tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds tpgs to add to the vs_tpg array match=true, so we will do: vhost_vq_set_backend(vq, vs_tpg); ... kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If vhost_scsi_set_endpoint is called again and no tpgs are found match=false so we skip the vhost_vq_set_backend call leaving the pointer to the vs_tpg we then free via: kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If a scsi request is then sent we do: vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend which sees the vs_tpg we just did a kfree on. 2. Tpg dir removal hang: This patch fixes an issue where we cannot remove a LIO/target layer tpg (and structs above it like the target) dir due to the refcount dropping to -1. The problem is that if vhost_scsi_set_endpoint detects a tpg is already in the vs->vs_tpg array or if the tpg has been removed so target_depend_item fails, the undepend goto handler will do target_undepend_item on all tpgs in the vs_tpg array dropping their refcount to 0. At this time vs_tpg contains both the tpgs we have added in the current vhost_scsi_set_endpoint call as well as tpgs we added in previous calls which are also in vs->vs_tpg. Later, when vhost_scsi_clear_endpoint runs it will do target_undepend_item on all the tpgs in the vs->vs_tpg which will drop their refcount to -1. Userspace will then not be able to remove the tpg and will hang when it tries to do rmdir on the tpg dir. 3. Tpg leak: This fixes a bug where we can leak tpgs and cause them to be un-removable because the target name is overwritten when vhost_scsi_set_endpoint is called multiple times but with different target names. The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup a vhost-scsi device to target/tpg mapping, then calls VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we haven't seen before (target1 has tpg1 but target2 has tpg2). When this happens we don't teardown the old target tpg mapping and just overwrite the target name and the vs->vs_tpg array. Later when we do vhost_scsi_clear_endpoint, we are passed in either target1 or target2's name and we will only match that target's tpgs when we loop over the vs->vs_tpg. We will then return from the function without doing target_undepend_item on the tpgs. Because of all these bugs, it looks like being able to call vhost_scsi_set_endpoint multiple times was never supported. The major user, QEMU, already has checks to prevent this use case. So to fix the issues, this patch prevents vhost_scsi_set_endpoint from being called if it's already successfully added tpgs. To add, remove or change the tpg config or target name, you must do a vhost_scsi_clear_endpoint first. CVE-2025-22081: In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix a couple integer overflows on 32bit systems On 32bit systems the off + sizeof(struct NTFS_DE) addition can have an integer wrapping issue. Fix it by using size_add(). CVE-2025-22080: In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Prevent integer overflow in hdr_first_de() The de_off and used variables come from the disk so they both need to check. The problem is that on 32bit systems if they're both greater than UINT_MAX - 16 then the check does work as intended because of an integer overflow. CVE-2025-22077: In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix netns refcount imbalance causing leaks and use-after-free Commit ef7134c7fc48 (smb: client: Fix use-after-free of network namespace.) attempted to fix a netns use-after-free issue by manually adjusting reference counts via sk->sk_net_refcnt and sock_inuse_add(). However, a later commit e9f2517a3e18 (smb: client: fix TCP timers deadlock after rmmod) pointed out that the approach of manually setting sk->sk_net_refcnt in the first commit was technically incorrect, as sk->sk_net_refcnt should only be set for user sockets. It led to issues like TCP timers not being cleared properly on close. The second commit moved to a model of just holding an extra netns reference for server->ssocket using get_net(), and dropping it when the server is torn down. But there remain some gaps in the get_net()/put_net() balancing added by these commits. The incomplete reference handling in these fixes results in two issues: 1. Netns refcount leaks[1] The problem process is as follows: ``` mount.cifs cifsd cifs_do_mount cifs_mount cifs_mount_get_session cifs_get_tcp_session get_net() /* First get net. */ ip_connect generic_ip_connect /* Try port 445 */ get_net() ->connect() /* Failed */ put_net() generic_ip_connect /* Try port 139 */ get_net() /* Missing matching put_net() for this get_net().*/ cifs_get_smb_ses cifs_negotiate_protocol smb2_negotiate SMB2_negotiate cifs_send_recv wait_for_response cifs_demultiplex_thread cifs_read_from_socket cifs_readv_from_socket cifs_reconnect cifs_abort_connection sock_release(); server->ssocket = NULL; /* Missing put_net() here. */ generic_ip_connect get_net() ->connect() /* Failed */ put_net() sock_release(); server->ssocket = NULL; free_rsp_buf ... clean_demultiplex_info /* It's only called once here. */ put_net() ``` When cifs_reconnect() is triggered, the server->ssocket is released without a corresponding put_net() for the reference acquired in generic_ip_connect() before. it ends up calling generic_ip_connect() again to retry get_net(). After that, server->ssocket is set to NULL in the error path of generic_ip_connect(), and the net count cannot be released in the final clean_demultiplex_info() function. 2. Potential use-after-free The current refcounting scheme can lead to a potential use-after-free issue in the following scenario: ``` cifs_do_mount cifs_mount cifs_mount_get_session cifs_get_tcp_session get_net() /* First get net */ ip_connect generic_ip_connect get_net() bind_socket kernel_bind /* failed */ put_net() /* after out_err_crypto_release label */ put_net() /* after out_err label */ put_net() ``` In the exception handling process where binding the socket fails, the get_net() and put_net() calls are unbalanced, which may cause the server->net reference count to drop to zero and be prematurely released. To address both issues, this patch ties the netns reference counti ---truncated--- CVE-2025-22075: In the Linux kernel, the following vulnerability has been resolved: rtnetlink: Allocate vfinfo size for VF GUIDs when supported Commit 30aad41721e0 (net/core: Add support for getting VF GUIDs) added support for getting VF port and node GUIDs in netlink ifinfo messages, but their size was not taken into consideration in the function that allocates the netlink message, causing the f ... Please note that the description has been truncated due to length. Please refer to vendor advisory for the full description. Tenable has extracted the preceding description block directly from the Tencent Linux security advisory. Note that Nessus has not tested for these issues but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Published	Updated	Severity
231829	Linux Distros Unpatched Vulnerability : CVE-2024-52560	Nessus	Misc.	3/6/2025	4/29/2026	medium
276237	TencentOS Server 4: kernel (TSSA-2025:0430)	Nessus	Tencent Local Security Checks	11/20/2025	11/20/2025	high

Detections

Analytics

Plugins Search

medium

high