The Linux/Unix host has one or more packages installed that are impacted by a vulnerability without a vendor supplied patch available.

  - In the Linux kernel, the following vulnerability has been resolved: MIPS: smp: fill in sibling and core     maps earlier After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core     interAptiv (CPS-driven) started emitting the following: [ 0.025698] CPU1 revision is: 0001a120 (MIPS     interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at     kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233]     CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [     0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278]     830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000     815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000     817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000     4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [     0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454]     [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [     0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>]     cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523]     [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [     0.048636] Synchronize counters for CPU 1: done. ...for each but CPU 0/boot. Basic debug printks right     before the mentioned line say: [ 0.048170] CPU: 1, smt_mask: So smt_mask, which is sibling mask obviously,     is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-     scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at     that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS). A bit of     debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated     after notify_cpu_start(), and exactly the latter function starts CPU HP callback round     (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after     the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than     starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests     couldn't find any potential caveats in calculating the maps right after performing delay calibration, but     the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them: [     0.048433] CPU: 1, smt_mask: 0-1 [0]     https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef (CVE-2022-48845)

Note that Nessus relies on the presence of the package as reported by the vendor.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2025-986455 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    MIPS: smp: fill in sibling and core maps earlier

    After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),     2-core 2-thread-per-core interAptiv (CPS-driven) started emitting     the following:

    [    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))     [    0.048183] ------------[ cut here ]------------     [    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240     [    0.048220] Modules linked in:
    [    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35     b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f     [    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1     [    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000     [    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000     [    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34     [    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933     [    0.048389]         ...
    [    0.048396] Call Trace:
    [    0.048399] [<8105a7bc>] show_stack+0x3c/0x140     [    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80     [    0.048440] [<8108b5c0>] __warn+0xc0/0xf4     [    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c     [    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240     [    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80     [    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140     [    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140     [    0.048523] [<8106593c>] start_secondary+0xbc/0x280     [    0.048539]     [    0.048543] ---[ end trace 0000000000000000 ]---     [    0.048636] Synchronize counters for CPU 1: done.

    ...for each but CPU 0/boot.
    Basic debug printks right before the mentioned line say:

    [    0.048170] CPU: 1, smt_mask:

    So smt_mask, which is sibling mask obviously, is empty when entering     the function.
    This is critical, as sched_core_cpu_starting() calculates     core-scheduling parameters only once per CPU start, and it's crucial     to have all the parameters filled in at that moment (at least it     uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on     MIPS).

    A bit of debugging led me to that set_cpu_sibling_map() performing     the actual map calculation, was being invocated after     notify_cpu_start(), and exactly the latter function starts CPU HP     callback round (sched_core_cpu_starting() is basically a CPU HP     callback).
    While the flow is same on ARM64 (maps after the notifier, although     before calling set_cpu_online()), x86 started calculating sibling     maps earlier than starting the CPU HP callbacks in Linux 4.14 (see     [0] for the reference). Neither me nor my brief tests couldn't find     any potential caveats in calculating the maps right after performing     delay calibration, but the WARN splat is now gone.
    The very same debug prints now yield exactly what I expected from     them:

    [    0.048433] CPU: 1, smt_mask: 0-1

    [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

An update of the linux package has been released.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2025-989909 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    MIPS: smp: fill in sibling and core maps earlier

    After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),     2-core 2-thread-per-core interAptiv (CPS-driven) started emitting     the following:

    [    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))     [    0.048183] ------------[ cut here ]------------     [    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240     [    0.048220] Modules linked in:
    [    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35     b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f     [    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1     [    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000     [    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000     [    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34     [    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933     [    0.048389]         ...
    [    0.048396] Call Trace:
    [    0.048399] [<8105a7bc>] show_stack+0x3c/0x140     [    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80     [    0.048440] [<8108b5c0>] __warn+0xc0/0xf4     [    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c     [    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240     [    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80     [    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140     [    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140     [    0.048523] [<8106593c>] start_secondary+0xbc/0x280     [    0.048539]     [    0.048543] ---[ end trace 0000000000000000 ]---     [    0.048636] Synchronize counters for CPU 1: done.

    ...for each but CPU 0/boot.
    Basic debug printks right before the mentioned line say:

    [    0.048170] CPU: 1, smt_mask:

    So smt_mask, which is sibling mask obviously, is empty when entering     the function.
    This is critical, as sched_core_cpu_starting() calculates     core-scheduling parameters only once per CPU start, and it's crucial     to have all the parameters filled in at that moment (at least it     uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on     MIPS).

    A bit of debugging led me to that set_cpu_sibling_map() performing     the actual map calculation, was being invocated after     notify_cpu_start(), and exactly the latter function starts CPU HP     callback round (sched_core_cpu_starting() is basically a CPU HP     callback).
    While the flow is same on ARM64 (maps after the notifier, although     before calling set_cpu_online()), x86 started calculating sibling     maps earlier than starting the CPU HP callbacks in Linux 4.14 (see     [0] for the reference). Neither me nor my brief tests couldn't find     any potential caveats in calculating the maps right after performing     delay calibration, but the WARN splat is now gone.
    The very same debug prints now yield exactly what I expected from     them:

    [    0.048433] CPU: 1, smt_mask: 0-1

    [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2025-986583 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    MIPS: smp: fill in sibling and core maps earlier

    After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),     2-core 2-thread-per-core interAptiv (CPS-driven) started emitting     the following:

    [    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))     [    0.048183] ------------[ cut here ]------------     [    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240     [    0.048220] Modules linked in:
    [    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35     b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f     [    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1     [    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000     [    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000     [    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34     [    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933     [    0.048389]         ...
    [    0.048396] Call Trace:
    [    0.048399] [<8105a7bc>] show_stack+0x3c/0x140     [    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80     [    0.048440] [<8108b5c0>] __warn+0xc0/0xf4     [    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c     [    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240     [    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80     [    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140     [    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140     [    0.048523] [<8106593c>] start_secondary+0xbc/0x280     [    0.048539]     [    0.048543] ---[ end trace 0000000000000000 ]---     [    0.048636] Synchronize counters for CPU 1: done.

    ...for each but CPU 0/boot.
    Basic debug printks right before the mentioned line say:

    [    0.048170] CPU: 1, smt_mask:

    So smt_mask, which is sibling mask obviously, is empty when entering     the function.
    This is critical, as sched_core_cpu_starting() calculates     core-scheduling parameters only once per CPU start, and it's crucial     to have all the parameters filled in at that moment (at least it     uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on     MIPS).

    A bit of debugging led me to that set_cpu_sibling_map() performing     the actual map calculation, was being invocated after     notify_cpu_start(), and exactly the latter function starts CPU HP     callback round (sched_core_cpu_starting() is basically a CPU HP     callback).
    While the flow is same on ARM64 (maps after the notifier, although     before calling set_cpu_online()), x86 started calculating sibling     maps earlier than starting the CPU HP callbacks in Linux 4.14 (see     [0] for the reference). Neither me nor my brief tests couldn't find     any potential caveats in calculating the maps right after performing     delay calibration, but the WARN splat is now gone.
    The very same debug prints now yield exactly what I expected from     them:

    [    0.048433] CPU: 1, smt_mask: 0-1

    [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

The Unity Linux 20 host has a package installed that is affected by a vulnerability as referenced in the UTSA-2025-987259 advisory.

    In the Linux kernel, the following vulnerability has been resolved:

    MIPS: smp: fill in sibling and core maps earlier

    After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle),     2-core 2-thread-per-core interAptiv (CPS-driven) started emitting     the following:

    [    0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi))     [    0.048183] ------------[ cut here ]------------     [    0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240     [    0.048220] Modules linked in:
    [    0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35     b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f     [    0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1     [    0.048278]         830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000     [    0.048307]         00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000     [    0.048334]         00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34     [    0.048361]         817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933     [    0.048389]         ...
    [    0.048396] Call Trace:
    [    0.048399] [<8105a7bc>] show_stack+0x3c/0x140     [    0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80     [    0.048440] [<8108b5c0>] __warn+0xc0/0xf4     [    0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c     [    0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240     [    0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80     [    0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140     [    0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140     [    0.048523] [<8106593c>] start_secondary+0xbc/0x280     [    0.048539]     [    0.048543] ---[ end trace 0000000000000000 ]---     [    0.048636] Synchronize counters for CPU 1: done.

    ...for each but CPU 0/boot.
    Basic debug printks right before the mentioned line say:

    [    0.048170] CPU: 1, smt_mask:

    So smt_mask, which is sibling mask obviously, is empty when entering     the function.
    This is critical, as sched_core_cpu_starting() calculates     core-scheduling parameters only once per CPU start, and it's crucial     to have all the parameters filled in at that moment (at least it     uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on     MIPS).

    A bit of debugging led me to that set_cpu_sibling_map() performing     the actual map calculation, was being invocated after     notify_cpu_start(), and exactly the latter function starts CPU HP     callback round (sched_core_cpu_starting() is basically a CPU HP     callback).
    While the flow is same on ARM64 (maps after the notifier, although     before calling set_cpu_online()), x86 started calculating sibling     maps earlier than starting the CPU HP callbacks in Linux 4.14 (see     [0] for the reference). Neither me nor my brief tests couldn't find     any potential caveats in calculating the maps right after performing     delay calibration, but the WARN splat is now gone.
    The very same debug prints now yield exactly what I expected from     them:

    [    0.048433] CPU: 1, smt_mask: 0-1

    [0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76ce7cfe35ef

Tenable has extracted the preceding description block directly from the Unity Linux security advisory.

Note that Nessus has not tested for this issue but has instead relied only on the application's self-reported version number.

ID	Name	Product	Family	Published	Updated	Severity
247015	Linux Distros Unpatched Vulnerability : CVE-2022-48845	Nessus	Misc.	8/9/2025	1/15/2026	medium
268330	Unity Linux 20.1070a Security Update: kernel (UTSA-2025-986455)	Nessus	Unity Linux Local Security Checks	10/7/2025	10/15/2025	medium
151965	Photon OS 4.0: Linux PHSA-2021-4.0-0065	Nessus	PhotonOS Local Security Checks	7/22/2021	3/23/2026	high
273616	Unity Linux 20.1070a Security Update: kernel (UTSA-2025-989909)	Nessus	Unity Linux Local Security Checks	11/5/2025	11/5/2025	medium
267985	Unity Linux 20.1070e Security Update: kernel (UTSA-2025-986583)	Nessus	Unity Linux Local Security Checks	10/7/2025	10/15/2025	medium
268221	Unity Linux 20.1070e Security Update: kernel (UTSA-2025-987259)	Nessus	Unity Linux Local Security Checks	10/7/2025	10/15/2025	medium

Detections

Analytics

Plugins Search

medium

medium

high

medium

medium

medium