| CVE-2026-98205 | In the Linux kernel, the following vulnerability has been resolved: Input: evdev - zero absinfo before partial copy in EVIOCSABS The EVIOCSABS handler copies at most the user supplied ioctl size into an uninitialized on-stack struct input_absinfo: if (copy_from_user(&abs, p, min_t(size_t, size, sizeof(struct input_absinfo)))) The size comes from _IOC_SIZE() of the ioctl command and is therefore fully controlled by userspace. A short size leaves the trailing part of the structure holding whatever was on the kernel stack, and the whole structure is then stored into the device: dev->absinfo[t] = abs; EVIOCGABS hands that back to userspace, disclosing the stale stack bytes. Only the resolution field is currently cleared, which covers the legacy struct layout but not an arbitrarily short size. Zero the structure before the copy so any part not supplied by the caller reads back as zero. The existing resolution fixup is kept, since it also handles a size that partially overlaps that field. | medium | 2026-10-19 |
| CVE-2026-98204 | In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes into SMBus blocks in rmi_smb_write_block(), the loop calculates block_len using the original total length (len) instead of the remaining length (cur_len). If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32 for every iteration, even on the final partial chunk where fewer than 32 bytes remain. This causes smb_block_write() to read 32 bytes from the advanced data buffer pointer, reading past the end of the input buffer. Fix this by calculating block_len using cur_len and advancing the buffer and address pointers by block_len. | high | 2026-10-19 |
| CVE-2026-98203 | In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.count is not 0 before accessing btns_desc->package.elements[0]. | high | 2026-10-19 |
| CVE-2026-98202 | In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL pointer dereference and General Protection Fault when attempting to lock data->enabled_mutex. Fix this by checking if driver data is attached to rmi_dev in rmi_driver_suspend() and rmi_driver_resume(), exiting early if no driver data is present. | medium | 2026-10-19 |
| CVE-2026-98201 | In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy. | high | 2026-10-19 |
| CVE-2026-98200 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show() nsensor->current_state is dynamically replaced as the sensor's state changes. update_numeric_sensor_from_wobj() does this by freeing the old string and installing a new one: if (strcmp(trimmed, nsensor->current_state)) { new_string = hp_wmi_strdup(dev, trimmed); if (new_string) { devm_kfree(dev, nsensor->current_state); nsensor->current_state = new_string; } } This function is only ever called from hp_wmi_update_info() while state->lock is held, so the free-and-replace itself is properly serialized against concurrent updates. fungible_show(), however, reads the same pointer after the lock has already been dropped: err = hp_wmi_update_info(state, info); if (err) return err; switch (prop) { ... case HP_WMI_PROPERTY_CURRENT_STATE: seq_printf(seqf, "%s\n", nsensor->current_state); break; hp_wmi_update_info() takes state->lock internally and releases it before returning, so by the time fungible_show() dereferences nsensor->current_state in seq_printf(), no lock is held. Two processes reading a sensor's current_state debugfs entry at overlapping times (or one reading it while another read of the same sensor triggers a refresh) can race: one thread's seq_printf() can be part-way through printing the string at the moment another thread's call into update_numeric_sensor_from_wobj() frees it with devm_kfree() and installs a new pointer, causing a use-after-free read. Take state->lock around the read in fungible_show() as well, so it can never run concurrently with the free-and-replace in update_numeric_sensor_from_wobj(). | high | 2026-10-19 |
| CVE-2026-98199 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) increase number of phases and add new mask Increase the number of phases to 16 as a new upcoming device supports such a number. While at it, add a new mask for controlling the source of the output voltage. Note (groeck): This patch was meant to prepare for support of MAX20826 and compatible devices, which support more than 10 phases per page. However, Sashiko reports that the mp2975 driver already supports up to 14 phases, and the mp2856 driver supports up to 12 phases. This already has the potential for out-of-bounds writes when probing the affected chips, making this patch a bug fix. | medium | 2026-10-19 |
| CVE-2026-98197 | In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe() creates the w83791d_group_fanpwm45 sysfs group on the I2C client device. The probe error path removes this group when a later initialization step fails, but the normal remove path only removes w83791d_group. As a result, the optional fan/pwm 4-5 sysfs files can remain after the driver is unbound. The callbacks associated with these files access the driver data, which is devm allocated and released after driver unbind. Leaving the sysfs files behind can therefore result in accesses to stale driver data. Remove w83791d_group_fanpwm45 during normal teardown as well. This issue was found by manual code inspection. | high | 2026-10-19 |
| CVE-2026-98196 | In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed. | high | 2026-10-19 |
| CVE-2026-98195 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: fix broadcast stations deallocation On the error path of __il4965_up(), il_dealloc_bcast_stations() clears only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the same broadcast stations to be deallocated again by __il4965_down(). This can occur when RF_KILL is toggled during driver startup. To fix clear the entire 'used' field, since we will not do any other operations on the station. | medium | 2026-10-19 |
| CVE-2026-98194 | In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command buffers before calling timer_delete_sync() to wait for the command timer callback. If the timer callback (command_timer_fn) is already running when lbtf_free_cmd_buffer() frees the command array, the callback dereferences priv->cur_cmd->cmdbuf which points to freed memory. Swap the order so that timer_delete_sync() runs first, ensuring any in-flight callback has completed before the command buffers are freed. | high | 2026-10-19 |
| CVE-2026-98191 | In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config() gets a runtime PM reference before sending the regulatory-domain command. When wlcore_cmd_regdomain_config_locked() fails, the function queues recovery and returns without dropping that reference. Release the reference after handling the command result so both success and failure paths balance the preceding pm_runtime_resume_and_get(). The recovery worker takes a separate runtime PM reference and cannot release the reference held here. | high | 2026-10-19 |
| CVE-2026-98190 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix out-of-bounds read in P2P public action frames wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once ieee80211_is_public_action() returns true. That helper only verifies the frame is long enough for the action category field, that is offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both functions then read the P2P public action header up to oui_subtype at offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32. A public action frame of 25 to 31 bytes passes the check but is shorter than that 32 byte header, so oui_subtype can be read out of bounds, and because the length is unsigned, "size - ie_offset" underflows to a value close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length, so even the size_t subtraction in mgmt_tx() is truncated to the same value. It then walks far past the buffer searching for a vendor element until it reaches unmapped memory. In the receive path the frame arrives over the air and needs no association, so a nearby unauthenticated device can crash the host while it is in P2P listen. Reject frames shorter than the P2P public action header in both paths before dereferencing it. | high | 2026-10-19 |
| CVE-2026-98189 | In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat. Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on. This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead of completing anyway, and the drop path performs the same interrupt acknowledgment and RX engine re-arming as the normal path, so subsequent transfers are received unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine. | high | 2026-10-19 |
| CVE-2026-98188 | In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Reject the entry when the counts do not fit in the entry data. | high | 2026-10-19 |
| CVE-2026-98187 | In the Linux kernel, the following vulnerability has been resolved: wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST The PDR_INTERFACE_LIST loop only checks that the record start is within the entry before reading an entire struct exp_if from it. A truncated trailing record makes the if_id/variant reads cross the entry boundary into the heap beyond the EEPROM buffer (verified with a KASAN reproducer of the loop). The variant also feeds the synth front-end selection, so this is not only a leak. Advance only while a full record still fits in the entry. | high | 2026-10-19 |
| CVE-2026-98186 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a beacon/probe-response RSN or WPA information element and then walks that many 4-byte OUIs, comparing each with memcmp(). The count comes straight from the (attacker-supplied) IE and is never checked against the element's own length, and the callers admit the element on element_id alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted RSN/WPA IE with a large pairwise count therefore makes the walk read up to 255 * 4 bytes past the element -- an out-of-bounds read of the kmemdup()'d beacon buffer, reachable from any AP whose beacon/probe response is processed during scan-result parsing. Pass the number of IE bytes available at the OUI list and bound the walk to the element. Keep the length signed and reject a negative value before any unsigned arithmetic, so a small or zero IE length cannot underflow to a large size_t and defeat the bound. Found by 0sec automated security-research tooling (https://0sec.ai). | high | 2026-10-19 |
| CVE-2026-98185 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: validate scan response extents mwifiex_ret_802_11_scan() subtracts the fixed response fields and the firmware-provided BSS length from resp->size without first proving that either extent fits. A short response or oversized BSS length can therefore underflow tlv_buf_size and make the TLV parser walk beyond the command response. Compute the fixed extent from the selected normal or background scan response. Validate that the fixed fields and BSS data fit before deriving the TLV extent and entering the parser. | medium | 2026-10-19 |
| CVE-2026-98184 | In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticate() derives the authentication frame length from req->ie_len and req->auth_data_len, both of type size_t, but stores it in a u16. NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is a u16, a single attribute can carry up to 65531 bytes of payload, so the sum can exceed U16_MAX before it is assigned to pkt_len. The truncated pkt_len determines the skb frame area, while the copy length remains req->auth_data_len - 4, resulting in a heap buffer overflow. For example, with auth_data_len equal to 65510 and no IEs, the sum is 65546. It is truncated to 10 and then reduced by four to 6. The driver appends only six bytes to the skb with skb_put(), but then copies 65506 user-provided bytes into the authentication body. Reaching this path requires CAP_NET_ADMIN in the user namespace owning the network namespace, an up station netdev, and a suitable BSS/SAE authentication request. Compute the length in size_t, reject values that cannot be represented by the firmware's u16 frame length field, and only then assign it to pkt_len. | high | 2026-10-19 |
| CVE-2026-98183 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds read for empty PREQ elements ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom fields before checking whether the element contains even the fixed header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to account for the optional Address Extension field. Consequently, an empty PREQ element causes a one-byte read beyond its declared payload. Move the helper call after both size checks, so the bottom fields are only accessed when they are present. | high | 2026-10-19 |
| CVE-2026-98182 | In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface only gets a TXQ if it's created active, and one can't be added later. Setting the flag on a down interface is still allowed, so the driver is handed a monitor with no queue. ath9k dereferences it: BUG: kernel NULL pointer dereference, address: 0000000000000066 RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k] ath9k_add_interface+0x10c/0x140 [ath9k] drv_add_interface+0x54/0x250 [mac80211] ieee80211_do_open+0x32f/0x800 [mac80211] Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by "ip link set X up". RTNL is held, so netlink operations block behind it. Refuse the flag when there is no queue to give. | medium | 2026-10-19 |
| CVE-2026-98181 | In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0–63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots. | high | 2026-10-19 |
| CVE-2026-98180 | In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/ | high | 2026-10-19 |
| CVE-2026-98179 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix rmmio iounmap skipped on device removal amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so drm_dev_enter() is already false there and the iounmap() guarded by it is skipped. This .remove path runs on both hot-unplug and plain rmmod, so the register BAR ioremap mapping leaks one instance per unload. Unmap rmmio unconditionally (guard only on non-NULL) and drop the now unused idx. (cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6) | medium | 2026-10-19 |
| CVE-2026-98178 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip KFD mapping clear before initialization amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev has a fully populated node array. This is not true when KFD device initialization fails after probe. For example, kgd2kfd_device_init() sets num_nodes before checking PCIe atomics support. On Polaris systems without the required atomics, it returns before allocating nodes[0], but the kfd_dev remains attached to the amdgpu device. A later GPU reset then dereferences nodes[0]->id. Require the authoritative KFD initialization flag before walking the node array, matching the existing KFD reset and teardown paths. (cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc) | high | 2026-10-19 |
| CVE-2026-98177 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634) | high | 2026-10-19 |
| CVE-2026-98176 | In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) | high | 2026-10-19 |
| CVE-2026-98175 | In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled // reconnect NOT canceled kfree_sensitive(server) // server freed ...later, on cifsiod_wq: smb2_reconnect_server() server->srv_count // UAF read of freed server Fix this by canceling server->reconnect delayed work in clean_demultiplex_info() before the server is freed, the same way cifs_put_tcp_session() already does. | high | 2026-10-19 |
| CVE-2026-98174 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next and ->prev to NULL instead of pointing to itself, making list_empty() always return false and list_add() dereference a NULL ->prev pointer. Also, cifs_signal_cifsd_for_reconnect() can be called concurrently from multiple cifsd threads, allowing the same server's rlist node to be added twice into the local list, corrupting it. | high | 2026-10-19 |
| CVE-2026-98172 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally. | medium | 2026-10-19 |
| CVE-2026-98171 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header. | high | 2026-10-19 |
| CVE-2026-98169 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read. | high | 2026-10-19 |
| CVE-2026-98167 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix server->total_read for compound encrypted PDUs In receive_encrypted_standard(), server->total_read is left at the full decrypted frame size when walking sub-PDUs of a compound encrypted frame. As a result, cifs_handle_standard() passes this full size to smb2_check_message(), causing the PDU length guards to incorrectly validate the entire compound frame instead of the current sub-PDU. This allows truncated non-last sub-PDUs to bypass length validation, leading to out-of-bounds reads in smb2_get_data_area_len(). Fix this by setting server->total_read to the true length of the current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining pdu_length for the last one. | high | 2026-10-19 |
| CVE-2026-98166 | In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix swapped-out resources never leaving their bulk_move range ttm_tt_swapout() returns the number of pages swapped out on success and a negative error code on failure; for a populated ttm it never returns zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") moved the bulk_move bookkeeping in ttm_bo_swapout_cb() under "if (!ret)", so the ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail() pair is now skipped on every successful swapout. The equivalent change for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure") tests "lret > 0", which is what was intended here as well. Before b2ed01e7ad3d the resource was taken off the bulk_move before the swapout; since then a swapped-out resource stays inside its BO's bulk_move range (and on the manager LRU) although it is unevictable. When it is later freed or the BO leaves the bulk_move (ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()), ttm_resource_del_bulk_move() skips it because of its !ttm_resource_unevictable() guard, so a range endpoint in pos->first / pos->last is left pointing at freed memory. The next ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(), "list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL dereference in ttm_resource_manager_next() -- minutes to hours after a hibernation, or at process exit / reboot following one. Samuel Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the dangling cursor; the missing removal at swapout time is the reason it dangles. Testing the condition for success restores the removal. On an AMD Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug crashed 5 of 18 hibernation cycles; a function profile of one hibernation showed 336 ttm_tt_swapout() calls and zero ttm_resource_del_bulk_move_unevictable() calls. With this change the removal happens for every swapped-out resource and 12 further cycles were clean. | high | 2026-10-19 |
| CVE-2026-98165 | Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | No Score | 2026-10-19 |
| CVE-2026-98163 | In the Linux kernel, the following vulnerability has been resolved: cgroup: Avoid iteration of dying tasks with zero refcount The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()") extended the lifetime of tasks on the dying_tasks list. The iterators have provision to go through dying_tasks because of dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however, it was expected that such tasks can obtain a new reference (that is possible before cgroup_task_release()/put_task_struct_rcu_user()). The tasks after cgroup_task_release() and before cgroup_task_free() are subject to race when they may or may not have ->usage count > 0. The race window is between css_task_iter_next() invocations when css_set_lock is released and we may arrive at a new ->task_pos. The iterator should not attempt to resurrect tasks whose ->usage count dropped to zero. (When that happens, __put_task_struct_rcu_cb() is already imminent and the returned task_struct would could be used after free.) As for the fix, we cannot simply check the signal->live count of a task on the dying list because that won't distinguish regular zombies waiting to be reaped from RCU remnant tasks that are going to be free'd. Therefore add an extra check to rule out ->usage==0 tasks from any iteration. The repeat: loop in css_task_iter_advance() doesn't consider ->usage count, so add a new loop to css_task_iter_next() to skip de-used tasks on the dying_list. Rough illustration of the possible race R (reader of cgroup.procs) T (thread) L (group leader) --------------------------------- -------------------------------- -------------------------------- L exits, signal->live > 0 cgroup_task_dead(L) css_set_skip_task_iters() // skips only cset->tasks list_add_tail(&L->cg_list, &cset->dying_tasks) css_task_iter_next() take css_set_lock css_task_iter_advance() leader && signal->live != 0 => it->task_pos = &L->cg_list release css_set_lock T exits --signal->live == 0 cgroup_task_dead(T) // css_set_lock release_task(T) cgroup_task_release(T) release_task(L) // zap_leader cgroup_task_release(L) put_task_struct_rcu_user(L) ...RCU... put_task_struct(L) L->usage = 0 /* L still on dying_tasks */ ...RCU... __put_task_struct(L) css_task_iter_next() // another iteration take css_set_lock it->task_pos = &L->cg_list get_task_struct(L) => addition on 0 drop css_set_lock cgroup_task_free(L) css_set_skip_task_iters() // dying skip comes too late free_task(L) cgroup_procs_show() task_pid_vnr(L) | high | 2026-10-19 |
| CVE-2026-98160 | In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init() padapter->HalData is allocated via vzalloc(), but incorrectly freed using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to release this vmalloc-backed buffer can lead to memory corruption. Use rtw_hal_data_deinit() to pair the free correctly and free HalData with vfree(). The bug was first flagged by an experimental static analysis tool we are developing for kernel memory-management bugs. Manual inspection confirms that the issue is still present in current mainline. An x86_64 allyesconfig build showed no new warnings. As we do not have suitable RTL8723BS SDIO hardware to test with, no runtime testing was able to be performed. | medium | 2026-10-19 |
| CVE-2026-98159 | In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying. | medium | 2026-10-19 |
| CVE-2026-98152 | In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources. | medium | 2026-10-19 |
| CVE-2026-98145 | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | medium | 2026-10-19 |
| CVE-2026-98144 | In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: put the chained BO when its mapping fails amdxdna_cmd_set_error() looks up the first BO of a command chain, which takes a reference, and drops it at the end of the function. The mapping of that BO is established in between, and the failure path returns without the put, so the reference is leaked. Ordinary use does not reach it. The chain has been submitted before any of this runs, so aie2_cmdlist_fill_slot() has already called amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its address. What makes it reachable is that the BO is resolved again by handle here, and the handle is userspace's to recycle: closing it after submission and importing a dma-buf whose exporter implements no vmap onto the same id leaves amdxdna_gem_get_obj() returning an object this cannot map, since prime_import() types every import AMDXDNA_BO_SHARE. | high | 2026-10-19 |
| CVE-2026-98143 | In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | high | 2026-10-19 |
| CVE-2026-98142 | In the Linux kernel, the following vulnerability has been resolved: drm/cirrus-qemu: Validate BAR0 size during probe The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate framebuffer sizes. However, during PCI probe, the driver mapped BAR0 without verifying that its size matches `CIRRUS_VRAM_SIZE`. If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the mapped VRAM will be smaller than expected. Because validation checks assume 4 MB VRAM, framebuffers larger than the mapped memory can be created. When the display plane is updated (e.g. during release), `cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory causes a supervisor write page fault: BUG: unable to handle page fault for address: ffffc9000389c000 ... RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110 ... Call Trace: <TASK> iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline] drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442 cirrus_primary_plane_helper_atomic_update+0x98a/0xb00 drivers/gpu/drm/tiny/cirrus-qemu.c:358 drm_atomic_helper_commit_planes+0x626/0xea0 drivers/gpu/drm/drm_atomic_helper.c:3038 drm_atomic_helper_commit_tail+0x60/0x510 drivers/gpu/drm/drm_atomic_helper.c:1989 commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074 drm_atomic_helper_commit+0xa77/0xb10 drivers/gpu/drm/drm_atomic_helper.c:2312 Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. | medium | 2026-10-19 |
| CVE-2026-98141 | In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller. | high | 2026-10-19 |
| CVE-2026-98140 | In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local leak in write_mft_record_nolock() error paths write_mft_record_nolock() maps the MFT record folio with kmap_local_folio(), but the pre_write_mst_fixup() and bio_add_folio() failure paths jump to the error label without unmapping it. kmap_local mappings are stack-ordered per task, so leaking one corrupts the nesting for any outer mapping. Unmap the folio on those error paths too. | high | 2026-10-19 |
| CVE-2026-98139 | In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded. | medium | 2026-10-19 |
| CVE-2026-98138 | In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | medium | 2026-10-19 |
| CVE-2026-98137 | In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation. | medium | 2026-10-19 |
| CVE-2026-98136 | In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. | high | 2026-10-19 |
| CVE-2026-98135 | In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid sectors_per_cluster in the boot sector is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field with a range test that rejects 0x81..0xf3 but accepts 0 and other non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector(): sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1; ... vol->cluster_size = vol->sector_size << sectors_per_cluster_bits; ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the shift is undefined: UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39 shift exponent 4294967295 is too large for 32-bit type 'int' This change rejects any non-power-of-two value, since it feeds the aforementioned shift via ffs() - 1, which only yields the correct shift for a power of two. | medium | 2026-10-19 |
