| CVE-2023-53050 | In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix memory leak in margining Memory for the usb4->margining needs to be relased for the upstream port of the router as well, even though the debugfs directory gets released with the router device removal. Fix this. | medium |
| CVE-2023-53049 | In the Linux kernel, the following vulnerability has been resolved: usb: ucsi: Fix NULL pointer deref in ucsi_connector_change() When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask. | medium |
| CVE-2023-53048 | In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix warning when handle discover_identity message Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again. | medium |
| CVE-2023-53047 | In the Linux kernel, the following vulnerability has been resolved: tee: amdtee: fix race condition in amdtee_open_session There is a potential race condition in amdtee_open_session that may lead to use-after-free. For instance, in amdtee_open_session() after sess->sess_mask is set, and before setting: sess->session_info[i] = session_info; if amdtee_close_session() closes this same session, then 'sess' data structure will be released, causing kernel panic when 'sess' is accessed within amdtee_open_session(). The solution is to set the bit sess->sess_mask as the last step in amdtee_open_session(). | high |
| CVE-2023-53046 | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix race condition in hci_cmd_sync_clear There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30 | high |
| CVE-2023-53045 | In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: don't let userspace block driver unbind In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor. | medium |
| CVE-2023-53044 | In the Linux kernel, the following vulnerability has been resolved: dm stats: check for and propagate alloc_percpu failure Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used. | medium |
| CVE-2023-53043 | In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sc7280: Mark PCIe controller as cache coherent If the controller is not marked as cache coherent, then kernel will try to ensure coherency during dma-ops and that may cause data corruption. So, mark the PCIe node as dma-coherent as the devices on PCIe bus are cache coherent. | high |
| CVE-2023-53042 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Do not set DRR on pipe Commit [WHY] Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a pipe commit can cause underflow. | medium |
| CVE-2023-53041 | In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Perform lockless command completion in abort path While adding and removing the controller, the following call trace was observed: WARNING: CPU: 3 PID: 623596 at kernel/dma/mapping.c:532 dma_free_attrs+0x33/0x50 CPU: 3 PID: 623596 Comm: sh Kdump: loaded Not tainted 5.14.0-96.el9.x86_64 #1 RIP: 0010:dma_free_attrs+0x33/0x50 Call Trace: qla2x00_async_sns_sp_done+0x107/0x1b0 [qla2xxx] qla2x00_abort_srb+0x8e/0x250 [qla2xxx] ? ql_dbg+0x70/0x100 [qla2xxx] __qla2x00_abort_all_cmds+0x108/0x190 [qla2xxx] qla2x00_abort_all_cmds+0x24/0x70 [qla2xxx] qla2x00_abort_isp_cleanup+0x305/0x3e0 [qla2xxx] qla2x00_remove_one+0x364/0x400 [qla2xxx] pci_device_remove+0x36/0xa0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 pci_stop_bus_device+0x68/0x90 pci_stop_and_remove_bus_device_locked+0x16/0x30 remove_store+0x75/0x90 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 ? do_user_addr_fault+0x1d8/0x680 ? do_syscall_64+0x69/0x80 ? exc_page_fault+0x62/0x140 ? asm_exc_page_fault+0x8/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xae The command was completed in the abort path during driver unload with a lock held, causing the warning in abort path. Hence complete the command without any lock held. | high |
| CVE-2023-53040 | In the Linux kernel, the following vulnerability has been resolved: ca8210: fix mac_len negative array access This patch fixes a buffer overflow access of skb->data if ieee802154_hdr_peek_addrs() fails. | high |
| CVE-2023-53039 | In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function When a reset notify IPC message is received, the ISR schedules a work function and passes the ISHTP device to it via a global pointer ishtp_dev. If ish_probe() fails, the devm-managed device resources including ishtp_dev are freed, but the work is not cancelled, causing a use-after-free when the work function tries to access ishtp_dev. Use devm_work_autocancel() instead, so that the work is automatically cancelled if probe fails. | high |
| CVE-2023-53038 | In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Check kzalloc() in lpfc_sli4_cgn_params_read() If kzalloc() fails in lpfc_sli4_cgn_params_read(), then we rely on lpfc_read_object()'s routine to NULL check pdata. Currently, an early return error is thrown from lpfc_read_object() to protect us from NULL ptr dereference, but the errno code is -ENODEV. Change the errno code to a more appropriate -ENOMEM. | high |
| CVE-2023-53037 | In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Bad drive in topology results kernel crash When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash. | medium |
| CVE-2023-53036 | In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix call trace warning and hang when removing amdgpu device On GPUs with RAS enabled, below call trace and hang are observed when shutting down device. v2: use DRM device unplugged flag instead of shutdown flag as the check to prevent memory wipe in shutdown stage. [ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu] [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu] [ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu] [ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu] [ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu] [ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] [ +0.000090] drm_dev_release+0x28/0x50 [drm] [ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm] [ +0.000011] devm_action_release+0x15/0x20 [ +0.000003] release_nodes+0x40/0xc0 [ +0.000001] devres_release_all+0x9e/0xe0 [ +0.000001] device_unbind_cleanup+0x12/0x80 [ +0.000003] device_release_driver_internal+0xff/0x160 [ +0.000001] driver_detach+0x4a/0x90 [ +0.000001] bus_remove_driver+0x6c/0xf0 [ +0.000001] driver_unregister+0x31/0x50 [ +0.000001] pci_unregister_driver+0x40/0x90 [ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu] | medium |
| CVE-2023-53035 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy() The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a metadata array to/from user space, may copy uninitialized buffer regions to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO and NILFS_IOCTL_GET_CPINFO. This can occur when the element size of the user space metadata given by the v_size member of the argument nilfs_argv structure is larger than the size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo structure) on the file system side. KMSAN-enabled kernels detect this issue as follows: BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0xc0/0x100 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:169 [inline] nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572 alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287 __get_free_pages+0x34/0xc0 mm/page_alloc.c:5599 nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74 nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline] nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290 nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343 __do_compat_sys_ioctl fs/ioctl.c:968 [inline] __se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910 __ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Bytes 16-127 of 3968 are uninitialized ... This eliminates the leak issue by initializing the page allocated as buffer using get_zeroed_page(). | high |
| CVE-2023-52757 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock* | high |
| CVE-2023-52752 | In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381 | high |
| CVE-2023-52621 | In the Linux kernel, the following vulnerability has been resolved: bpf: Check rcu_read_lock_trace_held() before calling bpf map helpers These three bpf_map_{lookup,update,delete}_elem() helpers are also available for sleepable bpf program, so add the corresponding lock assertion for sleepable bpf program, otherwise the following warning will be reported when a sleepable bpf program manipulates bpf map under interpreter mode (aka bpf_jit_enable=0): WARNING: CPU: 3 PID: 4985 at kernel/bpf/helpers.c:40 ...... CPU: 3 PID: 4985 Comm: test_progs Not tainted 6.6.0+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:bpf_map_lookup_elem+0x54/0x60 ...... Call Trace: <TASK> ? __warn+0xa5/0x240 ? bpf_map_lookup_elem+0x54/0x60 ? report_bug+0x1ba/0x1f0 ? handle_bug+0x40/0x80 ? exc_invalid_op+0x18/0x50 ? asm_exc_invalid_op+0x1b/0x20 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ? rcu_lockdep_current_cpu_online+0x65/0xb0 ? rcu_is_watching+0x23/0x50 ? bpf_map_lookup_elem+0x54/0x60 ? __pfx_bpf_map_lookup_elem+0x10/0x10 ___bpf_prog_run+0x513/0x3b70 __bpf_prog_run32+0x9d/0xd0 ? __bpf_prog_enter_sleepable_recur+0xad/0x120 ? __bpf_prog_enter_sleepable_recur+0x3e/0x120 bpf_trampoline_6442580665+0x4d/0x1000 __x64_sys_getpgid+0x5/0x30 ? do_syscall_64+0x36/0xb0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> | high |
| CVE-2023-52572 | In the Linux kernel, the following vulnerability has been resolved: cifs: Fix UAF in cifs_demultiplex_thread() There is a UAF when xfstests on cifs: BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160 Read of size 4 at addr ffff88810103fc08 by task cifsd/923 CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45 ... Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report+0x171/0x472 kasan_report+0xad/0x130 kasan_check_range+0x145/0x1a0 smb2_is_network_name_deleted+0x27/0x160 cifs_demultiplex_thread.cold+0x172/0x5a4 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 923: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 __kasan_slab_alloc+0x54/0x60 kmem_cache_alloc+0x147/0x320 mempool_alloc+0xe1/0x260 cifs_small_buf_get+0x24/0x60 allocate_buffers+0xa1/0x1c0 cifs_demultiplex_thread+0x199/0x10d0 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30 Freed by task 921: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_save_free_info+0x2a/0x40 ____kasan_slab_free+0x143/0x1b0 kmem_cache_free+0xe3/0x4d0 cifs_small_buf_release+0x29/0x90 SMB2_negotiate+0x8b7/0x1c60 smb2_negotiate+0x51/0x70 cifs_negotiate_protocol+0xf0/0x160 cifs_get_smb_ses+0x5fa/0x13c0 mount_get_conns+0x7a/0x750 cifs_mount+0x103/0xd00 cifs_smb3_do_mount+0x1dd/0xcb0 smb3_get_tree+0x1d5/0x300 vfs_get_tree+0x41/0xf0 path_mount+0x9b3/0xdd0 __x64_sys_mount+0x190/0x1d0 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The UAF is because: mount(pid: 921) | cifsd(pid: 923) -------------------------------|------------------------------- | cifs_demultiplex_thread SMB2_negotiate | cifs_send_recv | compound_send_recv | smb_send_rqst | wait_for_response | wait_event_state [1] | | standard_receive3 | cifs_handle_standard | handle_mid | mid->resp_buf = buf; [2] | dequeue_mid [3] KILL the process [4] | resp_iov[i].iov_base = buf | free_rsp_buf [5] | | is_network_name_deleted [6] | callback 1. After send request to server, wait the response until mid->mid_state != SUBMITTED; 2. Receive response from server, and set it to mid; 3. Set the mid state to RECEIVED; 4. Kill the process, the mid state already RECEIVED, get 0; 5. Handle and release the negotiate response; 6. UAF. It can be easily reproduce with add some delay in [3] - [6]. Only sync call has the problem since async call's callback is executed in cifsd process. Add an extra state to mark the mid state to READY before wakeup the waitter, then it can get the resp safely. | high |
| CVE-2023-46669 | Exposure of sensitive information to local unauthorized actors in Elastic Agent and Elastic Security Endpoint can lead to loss of confidentiality and impersonation of Endpoint to the Elastic Stack. This issue was identified by Elastic engineers and Elastic has no indication that it is known or has been exploited by malicious actors. | medium |
| CVE-2023-4620 | The Booking Calendar WordPress plugin before 9.7.3.1 does not sanitize and escape some of its booking from data, allowing unauthenticated users to perform Stored Cross-Site Scripting attacks against administrators | medium |
| CVE-2023-45721 | Insufficient default configuration in HCL Leap allows anonymous access to directory information. | medium |
| CVE-2023-4502 | The Translate WordPress with GTranslate WordPress plugin before 3.0.4 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup). This vulnerability affects multiple parameters. | medium |
| CVE-2023-44221 | Improper neutralization of special elements in the SMA100 SSL-VPN management interface allows a remote authenticated attacker with administrative privilege to inject arbitrary commands as a 'nobody' user, potentially leading to OS Command Injection Vulnerability. | high |
| CVE-2023-44204 | An Improper Validation of Syntactic Correctness of Input vulnerability in Routing Protocol Daemon (rpd) Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). When a malformed BGP UPDATE packet is received over an established BGP session, the rpd crashes and restarts. This issue affects both eBGP and iBGP implementations. This issue affects: Juniper Networks Junos OS * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R2-S2, 22.3R3; * 22.4 versions prior to 22.4R2-S1, 22.4R3; * 23.2 versions prior to 23.2R1, 23.2R2; Juniper Networks Junos OS Evolved * 21.4 versions prior to 21.4R3-S5-EVO; * 22.1 versions prior to 22.1R3-S3-EVO; * 22.2 versions prior to 22.2R3-S3-EVO; * 22.3 versions prior to 22.3R2-S2-EVO; * 22.4 versions prior to 22.4R3-EVO; * 23.2 versions prior to 23.2R2-EVO; | medium |
| CVE-2023-44184 | An Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in the management daemon (mgd) process of Juniper Networks Junos OS and Junos OS Evolved allows a network-based authenticated low-privileged attacker, by executing a specific command via NETCONF, to cause a CPU Denial of Service to the device's control plane. This issue affects: Juniper Networks Junos OS * All versions prior to 20.4R3-S7; * 21.2 versions prior to 21.2R3-S5; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S2; * 22.2 versions prior to 22.2R3; * 22.3 versions prior to 22.3R2-S1, 22.3R3; * 22.4 versions prior to 22.4R1-S2, 22.4R2. Juniper Networks Junos OS Evolved * All versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S2-EVO; * 22.2 versions prior to 22.2R3-EVO; * 22.3 versions prior to 22.3R3-EVO; * 22.4 versions prior to 22.4R2-EVO. An indicator of compromise can be seen by first determining if the NETCONF client is logged in and fails to log out after a reasonable period of time and secondly reviewing the WCPU percentage for the mgd process by running the following command: mgd process example: user@device-re#> show system processes extensive | match "mgd|PID" | except last PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 92476 root 100 0 500M 89024K CPU3 3 57.5H 89.60% mgd <<<<<<<<<<< review the high cpu percentage. Example to check for NETCONF activity: While there is no specific command that shows a specific session in use for NETCONF, you can review logs for UI_LOG_EVENT with "client-mode 'netconf'" For example: mgd[38121]: UI_LOGIN_EVENT: User 'root' login, class 'super-user' [38121], ssh-connection '10.1.1.1 201 55480 10.1.1.2 22', client-mode 'netconf' | medium |
| CVE-2023-43496 | Jenkins 2.423 and earlier, LTS 2.414.1 and earlier creates a temporary file in the system temporary directory with the default permissions for newly created files when installing a plugin from a URL, potentially allowing attackers with access to the system temporary directory to replace the file before it is installed in Jenkins, potentially resulting in arbitrary code execution. | high |
| CVE-2023-4294 | The URL Shortify WordPress plugin before 1.7.6 does not properly escape the value of the referer header, thus allowing an unauthenticated attacker to inject malicious javascript that will trigger in the plugins admin panel with statistics of the created short link. | medium |
| CVE-2023-4270 | The Min Max Control WordPress plugin before 4.6 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as admin. | medium |
| CVE-2023-41715 | SonicOS post-authentication Improper Privilege Management vulnerability in the SonicOS SSL VPN Tunnel allows users to elevate their privileges inside the tunnel. | high |
| CVE-2023-40455 | A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Sonoma 14. A sandboxed process may be able to circumvent sandbox restrictions. | critical |
| CVE-2023-4036 | The Simple Blog Card WordPress plugin before 1.32 does not ensure that posts to be displayed via a shortcode are public, allowing any authenticated users, such as subscriber, to retrieve arbitrary post title and their content such as draft, private and password protected ones | medium |
| CVE-2023-39434 | A use-after-free issue was addressed with improved memory management. This issue is fixed in iOS 17 and iPadOS 17, watchOS 10, macOS Sonoma 14. Processing web content may lead to arbitrary code execution. | high |
| CVE-2023-37535 | Insufficient URI protocol whitelist in HCL Domino Volt and Domino Leap allow script injection through query parameters. | high |
| CVE-2023-37517 | Missing "no cache" headers in HCL Leap permits sensitive data to be cached. | low |
| CVE-2023-35670 | In computeValuesFromData of FileUtils.java, there is a possible way to insert files to other apps' external private directories due to a path traversal error. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | high |
| CVE-2023-34051 | VMware Aria Operations for Logs contains an authentication bypass vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution. | critical |
| CVE-2023-33265 | In Hazelcast through 5.0.4, 5.1 through 5.1.6, and 5.2 through 5.2.3, executor services don't check client permissions properly, allowing authenticated users to execute tasks on members without the required permissions granted. | high |
| CVE-2023-28362 | The redirect_to method in Rails allows provided values to contain characters which are not legal in an HTTP header value. This results in the potential for downstream services which enforce RFC compliance on HTTP response headers to remove the assigned Location header. | medium |
| CVE-2023-28211 | A buffer overflow issue was addressed with improved memory handling. This issue is fixed in macOS Ventura 13.3. An app may be able to cause unexpected system termination or write kernel memory. | high |
| CVE-2022-49933 | In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Reset eVMCS controls in VP assist page during hardware disabling Reset the eVMCS controls in the per-CPU VP assist page during hardware disabling instead of waiting until kvm-intel's module exit. The controls are activated if and only if KVM creates a VM, i.e. don't need to be reset if hardware is never enabled. Doing the reset during hardware disabling will naturally fix a potential NULL pointer deref bug once KVM disables CPU hotplug while enabling and disabling hardware (which is necessary to fix a variety of bugs). If the kernel is running as the root partition, the VP assist page is unmapped during CPU hot unplug, and so KVM's clearing of the eVMCS controls needs to occur with CPU hot(un)plug disabled, otherwise KVM could attempt to write to a CPU's VP assist page after it's unmapped. | high |
| CVE-2022-49932 | In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes /dev/kvm to userspace and thus allows userspace to create VMs (and call other ioctls). E.g. KVM will encounter a NULL pointer when attempting to add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to create a VM before vmx_init() configures said list. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel] <TASK> vmx_vcpu_load+0x16/0x60 [kvm_intel] kvm_arch_vcpu_load+0x32/0x1f0 [kvm] vcpu_load+0x2f/0x40 [kvm] kvm_arch_vcpu_create+0x231/0x310 [kvm] kvm_vm_ioctl+0x79f/0xe10 [kvm] ? handle_mm_fault+0xb1/0x220 __x64_sys_ioctl+0x80/0xb0 do_syscall_64+0x2b/0x50 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f5a6b05743b </TASK> Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass | medium |
| CVE-2022-49931 | In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list. | medium |
| CVE-2022-49930 | In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix NULL pointer problem in free_mr_init() Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL pointer. It should be init mutex_init() first before use the lock. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: __mutex_lock.constprop.0+0xd0/0x5c0 __mutex_lock_slowpath+0x1c/0x2c mutex_lock+0x44/0x50 free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2] hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2] hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2] ib_dereg_mr_user+0x54/0x124 uverbs_free_mr+0x24/0x30 destroy_hw_idr_uobject+0x38/0x74 uverbs_destroy_uobject+0x48/0x1c4 uobj_destroy+0x74/0xcc ib_uverbs_cmd_verbs+0x368/0xbb0 ib_uverbs_ioctl+0xec/0x1a4 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x190 do_el0_svc+0x30/0x90 el0_svc+0x2c/0xb4 el0t_64_sync_handler+0x1a4/0x1b0 el0t_64_sync+0x19c/0x1a0 | medium |
| CVE-2022-49929 | In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix mr leak in RESPST_ERR_RNR rxe_recheck_mr() will increase mr's ref_cnt, so we should call rxe_put(mr) to drop mr's ref_cnt in RESPST_ERR_RNR to avoid below warning: WARNING: CPU: 0 PID: 4156 at drivers/infiniband/sw/rxe/rxe_pool.c:259 __rxe_cleanup+0x1df/0x240 [rdma_rxe] ... Call Trace: rxe_dereg_mr+0x4c/0x60 [rdma_rxe] ib_dereg_mr_user+0xa8/0x200 [ib_core] ib_mr_pool_destroy+0x77/0xb0 [ib_core] nvme_rdma_destroy_queue_ib+0x89/0x240 [nvme_rdma] nvme_rdma_free_queue+0x40/0x50 [nvme_rdma] nvme_rdma_teardown_io_queues.part.0+0xc3/0x120 [nvme_rdma] nvme_rdma_error_recovery_work+0x4d/0xf0 [nvme_rdma] process_one_work+0x582/0xa40 ? pwq_dec_nr_in_flight+0x100/0x100 ? rwlock_bug.part.0+0x60/0x60 worker_thread+0x2a9/0x700 ? process_one_work+0xa40/0xa40 kthread+0x168/0x1a0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 | high |
| CVE-2022-49928 | In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed There is a null-ptr-deref when xps sysfs alloc failed: BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0 Read of size 8 at addr 0000000000000030 by task gssproxy/457 CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 kasan_report+0xa3/0x120 sysfs_do_create_link_sd+0x40/0xd0 rpc_sysfs_client_setup+0x161/0x1b0 rpc_new_client+0x3fc/0x6e0 rpc_create_xprt+0x71/0x220 rpc_create+0x1d4/0x350 gssp_rpc_create+0xc3/0x160 set_gssp_clnt+0xbc/0x140 write_gssp+0x116/0x1a0 proc_reg_write+0xd6/0x130 vfs_write+0x177/0x690 ksys_write+0xb9/0x150 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 When the xprt_switch sysfs alloc failed, should not add xprt and switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize the 'xps_sysfs' to NULL to avoid oops when destroy it. | medium |
| CVE-2022-49927 | In the Linux kernel, the following vulnerability has been resolved: nfs4: Fix kmemleak when allocate slot failed If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | medium |
| CVE-2022-49926 | In the Linux kernel, the following vulnerability has been resolved: net: dsa: Fix possible memory leaks in dsa_loop_init() kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. | medium |
| CVE-2022-49925 | In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix null-ptr-deref in ib_core_cleanup() KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init(). | medium |
